Wall Thickness Wall Thickness |
|---|
|
|
|
Maximum Pressure Maximum Pressure |
|---|
Flexibility Flexibility |
|---|
|
For Use With For Use With |
|---|
Connection Type Connection Type |
|---|
 | Tube |
Connection Style Connection Style |
|---|
 |
| Compression |
Maximum Temperature Maximum Temperature |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
Clarity Clarity |
|---|
|
End Type End Type |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
Shape Shape |
|---|
 | Round Tube |
Hardness Hardness |
|---|
|
Sterilize With Sterilize With |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
Tubing Hardness Rating Tubing Hardness Rating |
|---|
|
About Plastic
More
About Sleeving
More
About Heat-Shrink Tubing
More
About Plastic and Rubber Tubing
More
Extreme-Pressure Hard Plastic Tubing for Chemicals
- Flexibility:
Inch Tubing: Semi-Flexible
Metric Tubing: Semi-Rigid - Compatible with Compression Tube Fittings
- Hardness Rating:
Inch Tubing: Hard
Metric Tubing: Hard (Durometer 65D) - Temperature Range:
Inch Tubing: -320° to 480° F
Metric Tubing: -75° to 500° F
A lightweight alternative to stainless steel, this PEEK plastic tubing can handle extreme-pressure applications and has excellent impact resistance. It has the chemical resistance to withstand a variety of acids and other harsh substances. Tubing is opaque, so you cannot see inside the line to monitor flow. It is semi-flexible, so it’s good for gradual bends.
Note: The walls of this tubing will permanently collapse if bent too far.
For technical drawings and 3-D models, click on a part number.
| ID | OD | Wall Thick. | Max. Pressure | Color | Lengths, ft. | Per Ft. | |
Opaque PEEK Plastic | |||||||
|---|---|---|---|---|---|---|---|
Inch | |||||||
| 0.005" | 1/16" | 0.029" | 3,450 psi @ 72° F | Red | 00000000 | 00000 | |
| 0.007" | 1/16" | 0.028" | 3,410 psi @ 72° F | Yellow | 00000000 | 0000 | |
| 0.01" | 1/16" | 0.026" | 3,320 psi @ 72° F | Blue | 00000000 | 0000 | |
| 0.02" | 1/16" | 0.021" | 2,840 psi @ 72° F | Orange | 00000000 | 0000 | |
| 0.03" | 1/16" | 0.016" | 2,180 psi @ 72° F | Green | 00000000 | 0000 | |
| 0.062" | 1/8" | 0.031" | 2,110 psi @ 72° F | Beige | 00000000 | 00000 | |
Metric | |||||||
| 1mm | 2mm | 0.5mm | 1,800 psi @ 72° F | Beige | 0000000 | 0000 | |
| 1mm | 3mm | 1mm | 3,520 psi @ 72° F | Beige | 0000000 | 0000 | |
| 2mm | 3mm | 0.5mm | 890 psi @ 72° F | Beige | 0000000 | 0000 | |
| Each | |||||||
| 2mm | 4mm | 1mm | 1,740 psi @ 72° F | Beige | 5 | 0000000 | 00000 |
| 2mm | 6mm | 2mm | 3,520 psi @ 72° F | Beige | 5 | 0000000 | 00000 |
| 3mm | 5mm | 1mm | 1,160 psi @ 72° F | Beige | 5 | 0000000 | 00000 |
| 3mm | 6mm | 1.5mm | 1,760 psi @ 72° F | Beige | 5 | 0000000 | 00000 |
| 4mm | 6mm | 1mm | 1,310 psi @ 72° F | Beige | 5 | 0000000 | 00000 |
Plastic and Rubber Tubing Material Sample Packs
These packs include individually marked pieces of tubing in a variety of materials.
| Includes | Pkg. Qty. | Pkg. | |
| One 3" long piece each of nylon, PTFE, PVDF, and PEEK tubing | 4 | 000000 | 000000 |
Wear- and Chemical-Resistant PEEK Tubes
- Color: Beige
- Temperature Range: -75° to 500° F
- Tensile Strength: 14,100 psi (Excellent)
- Impact Strength: 1.57 ft.-lbs./in. (Poor)
- Hardness: Rockwell R70 (Hard)
- For Use Outdoors: No
- Specifications Met: FDA Compliant 21 CFR 177.2415
Sometimes used as a lightweight substitute for metal parts in chemical-processing applications, these tubes resist wear from repetitive processes, as well as wear caused by abrasion. The OD is oversized and the ID is undersized for finishing to the sizes listed.
For technical drawings and 3-D models, click on a part number.
| OD | OD Tolerance | ID | ID Tolerance | Lengths, ft. | Per Ft. | |
1/16" Wall Thick. | ||||||
|---|---|---|---|---|---|---|
| 3/8" | 0" to 0.015" | 1/4" | -0.015" to 0" | 000000 | 000000 | |
1/8" Wall Thick. | ||||||
| 1/2" | 0" to 0.02" | 1/4" | -0.02" to 0" | 000000 | 00000 | |
1/4" Wall Thick. | ||||||
| 3/4" | 0" to 0.025" | 1/4" | -0.025" to 0" | 000000 | 00000 | |
| 1" | 0" to 0.03" | 1/2" | -0.03" to 0" | 000000 | 00000 | |
| 1 1/2" | 0" to 0.035" | 1" | -0.035" to 0" | 000000 | 000000 | |
1/2" Wall Thick. | ||||||
| 2" | 0" to 0.04" | 1" | -0.04" to 0" | 000000 | 000000 | |
High-Temperature Expandable Sleeving
Protect cable, hose, and pipe from abrasion and cuts in high temperature environments—this sleeving withstands temperatures over 450° F. It expands to fit over items for easy installation; sleeving then tightens around its contents for a secure fit. The braided construction permits heat and moisture to dissipate.
PTFE and PEEK sleeving withstand chemicals and salt water, so they can be used in extreme environments where cable and hose need protection from harsh fluids, such as in chemical plants and in oil and gas production. It has better abrasion and tear resistance than fiberglass sleeving. PTFE sleeving also withstands acids and solvents. PEEK is lighter in weight than PTFE, and more cost efficient.
Flame rated VW-1 sleeving meets requirements for preventing the spread of flames based on a timed test with vertically suspended material.
Per Ft. | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| ID | Expanded ID | Wall Thick. | Temperature Range, °F | Specifications Met | Color | Length, ft. | 1-49 | 50-Up | |
PEEK Fabric | |||||||||
| 1/4" | 1/2" | 1/32" | -90° to 480° | Flame Rated VW-1 | Black | 0000000 | 00000 | 00000 | |
| 1/2" | 7/8" | 1/32" | -90° to 480° | Flame Rated VW-1 | Black | 0000000 | 0000 | 0000 | |
| 3/4" | 1 1/8" | 1/32" | -90° to 480° | Flame Rated VW-1 | Black | 0000000 | 00000 | 0000 | |
| 1 1/4" | 1 3/4" | 1/32" | -90° to 480° | Flame Rated VW-1 | Black | 0000000 | 00000 | 00000 | |
| 1 3/4" | 2 1/2" | 1/32" | -90° to 480° | Flame Rated VW-1 | Black | 0000000 | 00000 | 00000 | |
High-Temperature Heat-Shrink Tubing
Use this tubing in applications where temperatures reach up to 500° F. It’s often used to insulate electronic components. Tubing resists abrasion and chemicals.
Semi-rigid tubing bends only slightly.
PEEK tubing has a higher dielectric strength than PTFE, so it’s better for electrical insulation. It also withstands high-pressure applications and is often used in oil and gas exploration.
Dielectric strength is the maximum voltage a material can handle before it starts to breakdown. The higher the dielectric strength of a material, the better it is for preventing electricity, heat, or signal from dissipating from wire and cable.
For technical drawings and 3-D models, click on a part number.
- Shrink Ratio: 1.4:1
- Dielectric Strength: 580 V/mil
- Shrink Temperature: 575° F
- Temperature Range: -20° to 500° F
- Flexibility: Semi-Rigid
ID | |||||||
|---|---|---|---|---|---|---|---|
| Before Shrinking | Min. After Shrinking | Min. Wall Thick. After Shrinking | For Wire Gauge | Color | Lengths, ft. | Per Ft. | |
| 0.05" | 0.03" | 0.005" | 16 | Amber | 0000000 | 00000 | |
| 0.09" | 0.06" | 0.005" | 14 | Amber | 0000000 | 0000 | |
| 0.1" | 0.07" | 0.005" | 12 | Amber | 0000000 | 0000 | |
| 0.13" | 0.09" | 0.005" | 10 | Amber | 0000000 | 00000 | |
| 0.16" | 0.11" | 0.005" | 8 | Amber | 0000000 | 00000 | |
| 0.2" | 0.14" | 0.005" | 6 | Amber | 0000000 | 00000 | |
| 0.25" | 0.18" | 0.005" | 4 | Amber | 0000000 | 00000 | |
| 0.32" | 0.23" | 0.005" | 2 | Amber | 0000000 | 00000 | |
| 0.39" | 0.28" | 0.005" | 1/0 | Amber | 0000000 | 00000 | |