McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    43 Products

    Peel-Away Multilayer Shims

    Image of Product. Front orientation. Shims. Sold Individually, Peel Away, Multilayer, Round.
    Fine-tune thickness without worrying about stacking multiple shims. These shims are made of metal layers bonded with adhesive—peel off the layers with a utility knife until you reach your desired thickness. To make peeling easier, warm the shims to soften the adhesive. With thickness tolerances as fine as a strand of hair, all of these shims precisely align, space, and level components on shafts, arbors, and machinery.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these shims resist rust. However, they’ll corrode or pit when exposed to salt water and chemicals.
    Aluminum—These shims are an alternative to stainless steel for rust resistance but aren't as hard so they may not retain their shape as well. One-third the weight of steel, they’re commonly used in robotics and automation.
    Brass—With a warm, polished look, these shims are often chosen for their appearance. Similar to 18-8 stainless steel, brass is corrosion resistant enough to stand up to wet environments.
    Material Certificate—Shims include a report with a traceable lot number.
    Thk.
    Thk. Tolerance
    ID Tolerance
    OD Tolerance
    No. of
    Layers
    Layer
    Thk.
    Min.
    Hardness
    Certificate Type
    Specs. Met
    Mil.
    Spec.
    Each
    18-8 Stainless Steel
     
    3/8" ID × 5/8" OD
    0.032"-0.005" to 0.005"-0.01" to 0.01"-0.01" to 0.01"160.002"Rockwell B75—ASTM A666—000000000000000
    0.062"-0.002" to 0.006"-0.01" to 0.01"-0.01" to 0.01"310.002"Rockwell B75—ASTM A666—00000000000000
     
    1/2" ID × 3/4" OD
    0.032"-0.005" to 0.005"-0.01" to 0.01"-0.01" to 0.01"160.002"Rockwell B75—ASTM A666—00000000000000
    0.062"-0.002" to 0.006"-0.01" to 0.01"-0.01" to 0.01"310.002"Rockwell B75—ASTM A666—00000000000000
     
    5/8" ID × 1" OD
    0.032"-0.005" to 0.005"-0.01" to 0.01"-0.01" to 0.01"160.002"Rockwell B75—ASTM A666—00000000000000
    0.062"-0.002" to 0.006"-0.01" to 0.01"-0.01" to 0.01"310.002"Rockwell B75—ASTM A666—00000000000000
    0.125"-0.005" to 0.005"-0.01" to 0.01"-0.01" to 0.01"620.002"Rockwell B75—ASTM A666—00000000000000
     
    3/4" ID × 1 1/8" OD
    0.125"-0.005" to 0.005"-0.01" to 0.01"-0.01" to 0.01"620.002"Rockwell B75—ASTM A666—00000000000000
     
    7/8" ID × 1 3/8" OD
    0.125"-0.005" to 0.005"-0.01" to 0.01"-0.01" to 0.01"620.002"Rockwell B75—ASTM A666—00000000000000
     
    Aluminum
     
    3/8" ID × 5/8" OD
    0.032"-0.002" to 0.003"-0.01" to 0.01"-0.01" to 0.01"160.002"Not Rated———0000000000000
    0.062"-0.002" to 0.006"-0.01" to 0.01"-0.01" to 0.01"310.002"Not Rated———0000000000000
     
    1/2" ID × 3/4" OD
    0.032"-0.002" to 0.003"-0.01" to 0.01"-0.01" to 0.01"160.002"Not Rated———0000000000000
    0.062"-0.002" to 0.006"-0.01" to 0.01"-0.01" to 0.01"310.002"Not Rated———00000000000000
     
    5/8" ID × 1" OD
    0.032"-0.002" to 0.003"-0.01" to 0.01"-0.01" to 0.01"160.002"Not Rated———00000000000000
    0.125"-0.003" to 0.012"-0.01" to 0.01"-0.01" to 0.01"620.002"Not Rated———00000000000000
     
    1" ID × 1 1/2" OD
    0.062"-0.002" to 0.006"-0.01" to 0.01"-0.01" to 0.01"310.002"Not Rated———00000000000000
    0.125"-0.003" to 0.012"-0.01" to 0.01"-0.01" to 0.01"620.002"Not Rated———00000000000000
     
    1 1/2" ID × 2 1/8" OD
    0.125"-0.003" to 0.012"-0.01" to 0.01"-0.01" to 0.01"620.002"Not Rated———00000000000000
     
    Brass
     
    0.135" ID × 0.234" OD
    0.032"-0.005" to 0.005"-0.01" to 0.01"-0.01" to 0.01"160.002"Not Rated———0000000000000
     
    0.193" ID × 3/8" OD
    0.032"-0.005" to 0.005"-0.01" to 0.01"-0.01" to 0.01"160.002"Not Rated———0000000000000
     
    0.255" ID × 1/2" OD
    0.032"-0.005" to 0.005"-0.01" to 0.01"-0.01" to 0.01"160.002"Not RatedMaterial Certificate
    		——0000000000000
     
    3/8" ID × 5/8" OD
    0.032"-0.005" to 0.005"-0.01" to 0.01"-0.01" to 0.01"160.002"Not Rated—ASTM B36, SAE AMS-DTL-22499MIL-S-569700000000000000
    0.062"-0.002" to 0.006"-0.01" to 0.01"-0.01" to 0.01"310.002"Not Rated—ASTM B36, SAE AMS-DTL-22499MIL-S-569700000000000000
     
    1/2" ID × 3/4" OD
    0.032"-0.005" to 0.005"-0.01" to 0.01"-0.01" to 0.01"160.002"Not Rated—ASTM B36, SAE AMS-DTL-22499MIL-S-569700000000000000
    0.062"-0.002" to 0.006"-0.01" to 0.01"-0.01" to 0.01"310.002"Not Rated—ASTM B36, SAE AMS-DTL-22499MIL-S-569700000000000000
     
    5/8" ID × 1" OD
    0.032"-0.005" to 0.005"-0.01" to 0.01"-0.01" to 0.01"160.002"Not Rated—ASTM B36, SAE AMS-DTL-22499MIL-S-569700000000000000
    0.062"-0.002" to 0.006"-0.01" to 0.01"-0.01" to 0.01"310.002"Not Rated—ASTM B36, SAE AMS-DTL-22499MIL-S-569700000000000000
    0.125"-0.003" to 0.012"-0.01" to 0.01"-0.01" to 0.01"620.002"Not Rated—ASTM B36, SAE AMS-DTL-22499MIL-S-569700000000000000
     
    3/4" ID × 1 1/8" OD
    0.032"-0.005" to 0.005"-0.01" to 0.01"-0.01" to 0.01"160.002"Not Rated—ASTM B36, SAE AMS-DTL-22499MIL-S-569700000000000000
    0.062"-0.002" to 0.006"-0.01" to 0.01"-0.01" to 0.01"310.002"Not Rated—ASTM B36, SAE AMS-DTL-22499MIL-S-569700000000000000
    0.125"-0.003" to 0.012"-0.01" to 0.01"-0.01" to 0.01"620.002"Not Rated—ASTM B36, SAE AMS-DTL-22499MIL-S-569700000000000000
     
    7/8" ID × 1 3/8" OD
    0.032"-0.005" to 0.005"-0.01" to 0.01"-0.01" to 0.01"160.002"Not Rated—ASTM B36, SAE AMS-DTL-22499MIL-S-569700000000000000
    0.062"-0.002" to 0.006"-0.01" to 0.01"-0.01" to 0.01"310.002"Not Rated—ASTM B36, SAE AMS-DTL-22499MIL-S-569700000000000000
    0.125"-0.003" to 0.012"-0.01" to 0.01"-0.01" to 0.01"620.002"Not Rated—ASTM B36, SAE AMS-DTL-22499MIL-S-569700000000000000
     
    1" ID × 1 1/2" OD
    0.032"-0.005" to 0.005"-0.01" to 0.01"-0.01" to 0.01"160.002"Not Rated—ASTM B36, SAE AMS-DTL-22499MIL-S-569700000000000000
    0.062"-0.002" to 0.006"-0.01" to 0.01"-0.01" to 0.01"310.002"Not Rated—ASTM B36, SAE AMS-DTL-22499MIL-S-569700000000000000
    0.125"-0.003" to 0.012"-0.01" to 0.01"-0.01" to 0.01"620.002"Not Rated—ASTM B36, SAE AMS-DTL-22499MIL-S-569700000000000000
     
    1 1/4" ID × 1 3/4" OD
    0.032"-0.005" to 0.005"-0.01" to 0.01"-0.01" to 0.01"160.002"Not Rated—ASTM B36, SAE AMS-DTL-22499MIL-S-569700000000000000
    0.062"-0.002" to 0.006"-0.01" to 0.01"-0.01" to 0.01"310.002"Not Rated—ASTM B36, SAE AMS-DTL-22499MIL-S-569700000000000000
    0.125"-0.003" to 0.012"-0.01" to 0.01"-0.01" to 0.01"620.002"Not Rated—ASTM B36, SAE AMS-DTL-22499MIL-S-569700000000000000
     
    1 1/2" ID × 2 1/8" OD
    0.032"-0.005" to 0.005"-0.01" to 0.01"-0.01" to 0.01"160.002"Not Rated—ASTM B36, SAE AMS-DTL-22499MIL-S-569700000000000000
    0.062"-0.002" to 0.006"-0.01" to 0.01"-0.01" to 0.01"310.002"Not Rated—ASTM B36, SAE AMS-DTL-22499MIL-S-569700000000000000
    0.125"-0.003" to 0.012"-0.01" to 0.01"-0.01" to 0.01"620.002"Not Rated—ASTM B36, SAE AMS-DTL-22499MIL-S-569700000000000000
     
    back to top