McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    33 Products

    Panel-Mount Fixed-Flow-Rate Peristaltic Pumps for Chemicals

    Image of Product. Front orientation. Peristaltic Pumps. Panel-Mount Fixed-Flow-Rate Peristaltic Pumps for Chemicals.
    Install these pumps in a panel cutout. Often used in food and beverage, pharmaceutical, and lab applications, they dispense small amounts of liquid at a set rate. Pumps can be wired to a switch for manual operation, or a PLC for automated equipment. The removable pump head includes an intake tube that quickly connects to your line with barbed fittings (not included). To change lines, disconnect tubing and twist and pull the head off the motor. Then twist on a replacement head (sold separately). Pumps come in three colors for easy identification or to match your existing equipment. All are self-priming and create suction to draw liquid upward. Mount pumps up to 28 ft. above your liquid source. They can run dry.
    Discharge
    Overall
    Blue Housing
    Clear Housing
    Green Housing
    Flow Rate,
    ml/min
    Max. Pressure,
    psi
    Max. Viscosity,
    cP
    Temp. Range,
    ° F
    Power,
    hp
    Current,
    amp
    Intake
    Connection
    Tube
    ID
    Tube
    OD
    Connection
    Wd.
    Ht.
    Dp.
    Each
    Each
    Each
    24V DC
     
    Hardwire
    552510,00032 to 1001/1501.5Barbed3/16"5/16"Barbed2 1/2"2 1/2"4 1/8"000000000000000000000000000000000000000000000
    1602510,00032 to 1001/1501.5Barbed3/16"5/16"Barbed2 1/2"2 1/2"4 1/8"000000000000000000000000000000000000000000
     
    Replacement Pump Heads

    Remote-Adjustment High-Pressure Peristaltic Pumps for Chemicals

    Image of Product. Front orientation. Peristaltic Pumps. Remote-Adjustment High-Pressure Peristaltic Pumps for Chemicals.
    Automatically control output from a distance using a variety of analog and digital signals, including 4-20mA and external pulse signals. Pumps can also be controlled manually, run on a schedule, or set to cycle on and off. View flow rate on the LED display. These pumps handle pressures four times higher than standard pumps. They meter a consistent amount of liquid within ±1% of the maximum flow. Often used in boiler feed systems and water treatment, they're compatible with chemicals such as cleaning fluids and acid-washing solutions. Pumps are self-priming and create suction to draw liquid upward. They can run dry.
    Overall
    Flow Rate,
    gal/day
    Max. Pressure,
    psi
    Max. Viscosity,
    cP
    Temp. Range,
    ° F
    Power,
    hp
    Current,
    amp
    Intake
    Connection
    Discharge
    Connection
    Lg.
    Wd.
    Ht.
    Includes
    Each
    120V AC, Single Phase with With Thermal Overload Protection
     
    Plug In
    0.05 to 51001,50032 to 1003/320.6CompressionCompression11"5 7/8"7 3/16"20 ft. of 1/4" OD Tubing00000000000000000
    0.17 to 171001,50032 to 1003/320.6CompressionCompression11"5 7/8"7 3/16"20 ft. of 1/4" OD Tubing0000000000000000
    0.4 to 401001,50032 to 1003/320.6CompressionCompression11"5 7/8"7 3/16"20 ft. of 1/4" OD Tubing0000000000000000
    0.85 to 85251,50032 to 1003/320.6CompressionCompression11"5 7/8"7 3/16"20 ft. of 1/4" OD Tubing0000000000000000
    1.3 to 1251001,50032 to 100Not Rated0.6CompressionCompression11"8 3/4"8 1/8"20 ft. of 3/8" OD Tubing0000000000000000
     

    High-Flow Peristaltic Pumps for Chemicals

    Image of Product. Front orientation. Peristaltic Pumps. High-Flow Peristaltic Pumps for Chemicals.
    For high-volume chemical sampling and draining, these pumps have a powerful motor that enables them to move 2,592 gallons of liquid per day. They're commonly used with ammonia, acid-washing solutions, and cleaning fluids. Motor is open dripproof (ODP) for use in clean, dry, and well-ventilated environments. Pumps are self-priming and create a suction force to draw liquid upward. Mount up to 15 feet above your liquid source. They can run dry. Do not use with solids.
    Intake
    Discharge
    Overall
    Flow Rate,
    gal/day
    Max. Pressure,
    psi
    Max. Viscosity,
    cP
    Temp. Range,
    ° F
    Power,
    hp
    Current,
    amp
    For Tube
    ID
    Connection
    For Tube
    ID
    Connection
    Lg.
    Wd.
    Ht.
    Includes
    Each
    120V AC, Single Phase
     
    Plug In
    2,592201,00035 to 1601/43.11/2"Barbed1/2"Barbed10"5 1/2"10"10 5/8" Lg. of 1/2" ID Tygon Tubing (Shore A61)00000000000000
     
    Replacements for Peristaltic Pumps

    High-Pressure Peristaltic Pumps for Chemicals

    Image of Product. Front orientation. Peristaltic Pumps. High-Pressure Peristaltic Pumps for Chemicals.
    These pumps can be used with pressures four times higher than standard pumps. An adjustment dial lets you alter flow rate in 2.5% increments of the maximum flow without the hassle of changing tubing. Often used in boiler feed systems and water treatment, they're compatible with chemicals such as cleaning fluids and acid-washing solutions. Pumps are self-priming and create suction to draw liquid upward. They can run dry.
    Pumps
    Replacement
    Pump Heads
    Replacement
    Tubing
    Discharge
    Overall
    Flow Rate,
    gal/day
    Max. Pressure,
    psi
    Max. Viscosity,
    cP
    Temp. Range,
    ° F
    Power,
    hp
    Current,
    amp
    Intake
    Connection
    Tube
    ID
    Tube
    OD
    Connection
    Lg.
    Wd.
    Ht.
    Includes
    Each
    Each
    Each
    120V AC, Single Phase
     
    Plug In
    0.3 to 51001,50035 to 1251/301.7Compression3/16"1/4"Compression11"5"6"20-ft. Lg. of LDPE Plastic Intake/Discharge Tubing00000000000000000000000000000000000000000
    0.8 to 171001,50035 to 1251/301.7Compression3/16"1/4"Compression11"5"6"20-ft. Lg. of LDPE Plastic Intake/Discharge Tubing00000000000000000000000000000000000000
    2 to 401001,50035 to 1251/301.7Compression3/16"1/4"Compression11"5"6"20-ft. Lg. of LDPE Plastic Intake/Discharge Tubing00000000000000000000000000000000000000
     

    Peristaltic Pumps for Chemicals

    Image of Product. Front orientation. Peristaltic Pumps. Peristaltic Pumps for Chemicals.
    An adjustment screw lets you increase or decrease flow rate without the hassle of changing tubing. Often used in boiler feed systems and water treatment, these pumps are compatible with chemicals such as cleaning fluids and acid-washing solutions. Pumps are self-priming and create suction to draw liquid upward. They can run dry.
    Pumps
    Replacement
    Pump Collars
    Replacement Pump
    Intake Tubes
    For
    Tube
    Overall
    Flow Rate,
    gal/day
    Max. Pressure,
    psi
    Max. Viscosity,
    cP
    Temp. Range,
    ° F
    Power,
    hp
    Current,
    amp
    ID
    OD
    Intake
    Connection
    Discharge
    Connection
    Lg.
    Wd.
    Ht.
    Includes
    Each
    Each
    Each
    120V AC, Single Phase
     
    Plug In
    2 to 122520035 to 1001/640.33/16"3/8"CompressionCompression8"7"6"9" Lg. of Tygon Tubing (Shore A70)0000000000000000000000000000000000000000000
    3 to 202520035 to 1001/640.31/4"7/16"CompressionCompression8"7"6"9" Lg. of Tygon Tubing (Shore A70)0000000000000000000000000000000000000000
     
    Replacement Pump Heads
    back to top