McMaster-Carr logo
    Filter by
    Adjustment Mechanism
    Adjustment Direction
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    DFARS Specialty Metals
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Overall Width
    Overall Depth
    Foldable
    Toeboard Height
    Guardrail Height
    Back Guard Height
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    15 Products

    Scissor Lifts

    Image of ProductInUse. Side1 orientation. Scissor Lifts.
    Image of Product. Side1 orientation. Scissor Lifts.
    Take your maintenance and repair tasks to new heights—these scissor lifts were built for reliability. Each part has been inspected and tested to ensure these lifts remain in service for over a decade. They’re designed to minimize hydraulic connections and cylinders to reduce failure points. Powered by a brushless motor, there’s no need for regular maintenance. Even the operation is no fuss—a single joystick controls both driving and elevation.
    Their compact size and tight turning radius let you navigate through standard doorways and crowded spaces. Suitable for indoor and outdoor use, they’re made of powder-coated steel parts—even the pins and screws—and have waterproof connectors that stand up to the elements. Pothole guards keep them from tipping on uneven surfaces.
    The platform supports up to 500 lbs. and is wide enough for two people to work comfortably side-by-side. Guardrails on each side meet fall-protection requirements. With three fall-restraint tie-off points, you have additional spots to anchor fall protection gear.
    Note: Check local, state, and federal codes, including OSHA, for safe operating practices. Do not operate these lifts in winds over 25 mph. When used outdoors, only one person should be on them at a time.
    Platform
    Base
    Ht.,
    ft.
    Lg.
    Wd.
    Lg.
    Wd.
    Guardrail
    Ht.
    Toeboard
    Ht.
    Wt. Cap.,
    lb.
    Turning
    Radius, ft.
    Elevation Speed,
    in/sec
    Duty Cycle
    Motor
    Type
    Batteries
    Included
    Voltage,
    V AC
    Battery Charger
    Included
    Battery Recharge
    Time Range, hr.
    Material
    Color
    Features
    Specs. Met
    Each
    Haulotte Optimum 1931
    7 to 1968" to 102"29"75"31"44"6"50058 1/461 Cycles per HourBrushlessYes24Yes8 to 10Powder-Coated SteelYellowThree Fall-Restraint Attachment PointsANSI/SAIA A92.20, CSA B354.66813N1110000000000
     

    Easy-Store Forklift Platforms

    Image of Product. Front orientation. Work Platforms. Easy-Store Forklift Platforms.
    With foldable rails, these platforms can be collapsed to the size of a pallet for easy storage when not in use. Attach them to your forklift for an enclosed, elevated work platform. Securely attach these platforms to your forklifts using the pins behind the forks. A backguard protects you from the moving parts of your forklift. Use the gates on either side for entry.
    You are responsible for adhering to local, state, and federal safety codes, including OSHA.
    Yellow—They are painted bright yellow and are easy to spot while in use.
    Powder-Coated Steel—Made of powder-coated steel, these platforms are durable and rust-resistant.
    Diamond Tread—The walking surface has a diamond-tread texture for good slip resistance.
    Weight Capacity—To prevent accidents and injuries, confirm your forklift can handle the combined weight of the platform, personnel, and materials.
    Overall
    For
    Max. Fork
    Wd.
    Dp.
    Guardrail
    Ht.
    Toeboard
    Ht.
    Wd.
    Ht.
    Wt. Cap.,
    lb.
    Platform
    Tread
    Assembly
    Each
    Yellow Powder-Coated Steel
     
    70" High Back Guard
    38"38"38"4"7 7/8"3 3/8"600Diamond TreadUnassembled9151N110000000
     
    Casters
    Image of Product. Front orientation. Casters. Easy-Store Forklift Platforms.
    Add casters for smooth transport from storage to your work area.
    Wheel
    Dia.
    Wd.
    Wheel Configuration
    Wt. Cap. per
    Caster, lb.
    No. of
    Casters
    Each
    Nonmarking Polyurethane Rubber Wheels
    4"2"Two Rigid Casters and Two Swivel Casters with Brakes44049151N130000000
     

    Quick-Stop Retracting Fall-Arrest Lanyards

    Image of ProductInUse. Front orientation. Contains Annotated. Fall-Arrest Lanyards. Quick-Stop Retracting Fall-Arrest Lanyards.
    Image of Product. Front orientation. Fall-Arrest Lanyards. Quick-Stop Retracting Fall-Arrest Lanyards, 1 Anchor End Connection, Webbing.

    1 Anchor

    End

    Connection,

    Webbing

    Move freely, but limit how far you drop if you fall while working at height. These lanyards extend and retract as you move around to keep the slack out of your way. But with a sudden jerk, such as a fall, they immediately lock like a seat belt to stop you. They stop your fall within inches, unlike shock-absorbing lanyards that extend several feet. A built-in shock absorber reduces the jolt of the stop. Used together with a harness and an anchor, they help you meet OSHA and ANSI safety standards.
    Class 1—Use Class 1 lanyards when your anchor is at the same level as or above your D-ring.
    1 Anchor End Connection—Lanyards with 1 anchor end connection are best when you’re working in a single location.
    Webbing—Webbing lanyards are flexible and lightweight, so they won't weigh you down.
    Cab-Mount Bracket—Lanyards with a cab-mounting bracket have a curved top that slides along the rail of your vehicle, so you can move freely.
    Impact-Indicating Stitching—Lanyards with impact indicator stitching have patches designed to tear during a fall or impact, so it’s easy to tell if a lanyard is still safe to use.
    RFID Tag—Lanyards with an RFID tag can be scanned during inventory and inspections to make tracking easy.
    Harness End
    Connection
    Anchor End
    Connection
    Lg.,
    ft.
    Material
    Construction
    Hardware
    Material
    Hardware
    Material
    Snap Hook
    Opening Size
    Housing
    Material
    Wt. Cap.,
    lb.
    Specs. Met
    Features
    Each
    Class 1
     
    1 Anchor End Connection
    6UHMW PolyethyleneWebbingSnap HookSteelCab-Mount BracketStainless Steel
    		3/4"Plastic420ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502RFID Tag9363N1110000000
    11UHMW PolyethyleneWebbingSnap HookSteelCab-Mount BracketStainless Steel
    		3/4"Plastic420ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502Impact-Indicating Stitching9363N112000000
     

    Forklift Platforms

    Image of Attribute. Front orientation. Contains Annotated. Work Platforms. Forklift Platforms.
    Image of Attribute. Platform Shown with Accessories (Sold Separately). Front orientation. Contains Annotated. Work Platforms. Forklift Platforms, 4" Toeboard Height.

    Platform Shown with Accessories

    (Sold Separately)

    Transform your forklift into an elevated work surface. These platforms attach to your forks so you can raise them to the height you need. Use the attachment points to connect fall-arrest equipment.
    72" Overall Width—72" wide platforms are large enough to hold multiple people, along with their tools and supplies.
    Powder-Coated Steel—They’re made of steel to hold up to heavy use, and a powder coating helps prevent rust.
    Diamond Tread and Wire Mesh—The surface has either diamond tread or wire mesh to keep you from slipping.
    Weight Capacity—Check your forklift’s capacity to make sure it can handle the weight of the platform plus the people and materials you want to lift.
    Specifications Met—Platforms that have Cal/OSHA specifications listed meet dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Platforms
    Tool Trays
    Replacement
    Swivel Casters
    For
    Max. Fork
    Overall
    Dp.
    Back Guard
    Ht.
    Guardrail
    Ht.
    Toeboard
    Ht.
    Wd.
    Ht.
    Wt. Cap.,
    lb.
    Wt.,
    lb.
    Material
    Color
    Platform
    Tread
    Assembly
    Specs. Met
    Each
    Each
    Each
    36" Overall Width
    36"66"42"4"7 3/4"3 7/8"
    1 7/8"    		1,000192Powder-Coated SteelBlue/YellowDiamond TreadAssembledANSI/ITSDF B56.17952T7100000007952T450000007952T37000000
    36"84"42"4"7 3/4"3 7/8"
    1 7/8"    		1,000200Powder-Coated SteelBlue/YellowDiamond TreadAssembledANSI/ITSDF B56.1, Cal/OSHA Compliant Title 8 Section 36427952T7410000007952T45000007952T3700000
    48"66"42"4"7 3/4"3 7/8"
    1 7/8"    		1,000260Powder-Coated SteelBlue/YellowDiamond TreadAssembledANSI/ITSDF B56.17952T720000007952T45000007952T3700000
    48"84"42"4"7 3/4"3 7/8"
    1 7/8"    		1,000268Powder-Coated SteelBlue/YellowDiamond TreadAssembledANSI/ITSDF B56.1, Cal/OSHA Compliant Title 8 Section 36427952T742000000007952T45000007952T3700000
     
    48" Overall Width
    48"66"42"4"7 3/4"3 7/8"
    1 7/8"    		1,000265Powder-Coated SteelBlue/YellowDiamond TreadAssembledANSI/ITSDF B56.17952T730000007952T46000007952T3700000
    48"84"42"4"7 3/4"3 7/8"
    1 7/8"    		1,000272Powder-Coated SteelBlue/YellowDiamond TreadAssembledANSI/ITSDF B56.1, Cal/OSHA Compliant Title 8 Section 36427952T743000000007952T46000007952T3700000
     
    72" Overall Width
    48"60"43"6"7 1/2"2 1/2"1,000507Powder-Coated SteelBlackWire MeshUnassembledANSI/ITSDF B56.17952T10100000000———0———0
     
    back to top