How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
About On/Off Valves
More
Crack-Resistant PFA Pipe Fittings for Chemicals
- For Use With: Acetic Acid, Alcohol, Salt Water
- Max. Temperature: 150° F
Not only do these PFA fittings have the chemical resistance to handle acid and salt water, they also have better crack resistance than other plastic pipe fittings for chemicals. Also known as Schedule 80 fittings, they have thick, strong walls to handle heavy duty chemical processing applications. Fittings have a super-smooth interior for unrestricted flow. They are commonly used in high-purity chemical flow processes, such as semiconductor and clean room applications, because the material won’t leach contaminates into the line. Apply a non-hardening, plastic-compatible sealant to the male threads to prevent leaks. Tape or sealants with PTFE are not recommended for plastic-to-plastic threaded connections. When making a threaded connection be careful not to overtighten the threads. To connect, finger tighten the fitting, then wrench-tighten one to two turns.
Warning: Never use plastic pipe fittings and pipe with compressed air or gas.
Sealants cannot be sold to Colorado, Connecticut, District of Columbia, Delaware, Illinois, Indiana, Massachusetts, Maryland, Maine, Michigan, New Hampshire, New Jersey, Northern Virginia, New York, Ohio, Pennsylvania, Rhode Island, or Utah due to local VOC (Volatile Organic Compounds) regulations.

Pipe Size | Material | Color | Max. Pressure | Each | |
NPT Threads | |||||
---|---|---|---|---|---|
1/8 | PFA Plastic | White | 120 psi @ 72° F | 000000000 | 000000 |
1/4 | PFA Plastic | White | 120 psi @ 72° F | 000000000 | 00000 |
3/8 | PFA Plastic | White | 120 psi @ 72° F | 000000000 | 00000 |
1/2 | PFA Plastic | White | 100 psi @ 72° F | 000000000 | 00000 |
3/4 | PFA Plastic | White | 70 psi @ 72° F | 000000000 | 000000 |
Non-Hardening Thread Sealant (8-oz. Brush-Top Can) | 000000 | Each | 000000 |

Pipe Size | Material | Color | Max. Pressure | Each | |
NPT Threads | |||||
---|---|---|---|---|---|
1/8 | PFA Plastic | White | 120 psi @ 72° F | 000000000 | 000000 |
1/4 | PFA Plastic | White | 120 psi @ 72° F | 000000000 | 00000 |
3/8 | PFA Plastic | White | 120 psi @ 72° F | 000000000 | 00000 |
1/2 | PFA Plastic | White | 100 psi @ 72° F | 000000000 | 00000 |
3/4 | PFA Plastic | White | 70 psi @ 72° F | 000000000 | 00000 |
Non-Hardening Thread Sealant (8-oz. Brush-Top Can) | 000000 | Each | 000000 |

Pipe Size (A) | Pipe Size (B) | Material | Color | Max. Pressure | Each | |
NPT Threads | ||||||
---|---|---|---|---|---|---|
1/4 | 1/8 | PFA Plastic | White | 120 psi @ 72° F | 000000000 | 000000 |
3/8 | 1/4 | PFA Plastic | White | 120 psi @ 72° F | 000000000 | 00000 |
1/2 | 1/4 | PFA Plastic | White | 100 psi @ 72° F | 000000000 | 00000 |
1/2 | 3/8 | PFA Plastic | White | 100 psi @ 72° F | 000000000 | 00000 |
3/4 | 1/2 | PFA Plastic | White | 70 psi @ 72° F | 000000000 | 00000 |
Non-Hardening Thread Sealant (8-oz. Brush-Top Can) | 000000 | Each | 000000 |

Pipe Size (A) | Pipe Size (B) | Material | Color | Max. Pressure | Each | |
NPT Threads | ||||||
---|---|---|---|---|---|---|
1/8 | 1/4 | PFA Plastic | White | 120 psi @ 72° F | 000000000 | 000000 |
1/4 | 3/8 | PFA Plastic | White | 120 psi @ 72° F | 000000000 | 00000 |
1/4 | 1/2 | PFA Plastic | White | 100 psi @ 72° F | 000000000 | 00000 |
3/8 | 1/2 | PFA Plastic | White | 100 psi @ 72° F | 000000000 | 00000 |
1/2 | 3/4 | PFA Plastic | White | 70 psi @ 72° F | 000000000 | 000000 |
Non-Hardening Thread Sealant (8-oz. Brush-Top Can) | 000000 | Each | 000000 |

Pipe Size | Material | Color | Max. Pressure | Each | |
NPT Threads | |||||
---|---|---|---|---|---|
1/8 | PFA Plastic | White | 120 psi @ 72° F | 000000000 | 000000 |
1/4 | PFA Plastic | White | 120 psi @ 72° F | 000000000 | 00000 |
3/8 | PFA Plastic | White | 120 psi @ 72° F | 000000000 | 000000 |
1/2 | PFA Plastic | White | 100 psi @ 72° F | 000000000 | 000000 |
3/4 | PFA Plastic | White | 70 psi @ 72° F | 000000000 | 000000 |
Non-Hardening Thread Sealant (8-oz. Brush-Top Can) | 000000 | Each | 000000 |

Pipe Size | Material | Color | Max. Pressure | Each | |
NPT Threads | |||||
---|---|---|---|---|---|
1/8 | PFA Plastic | White | 120 psi @ 72° F | 000000000 | 000000 |
1/4 | PFA Plastic | White | 120 psi @ 72° F | 000000000 | 00000 |
3/8 | PFA Plastic | White | 120 psi @ 72° F | 000000000 | 00000 |
1/2 | PFA Plastic | White | 100 psi @ 72° F | 000000000 | 000000 |
3/4 | PFA Plastic | White | 70 psi @ 72° F | 000000000 | 000000 |
Non-Hardening Thread Sealant (8-oz. Brush-Top Can) | 000000 | Each | 000000 |

Pipe Size | Material | Color | Max. Pressure | Each | |
NPT Threads | |||||
---|---|---|---|---|---|
1/8 | PFA Plastic | White | 120 psi @ 72° F | 000000000 | 000000 |
1/4 | PFA Plastic | White | 120 psi @ 72° F | 000000000 | 00000 |
3/8 | PFA Plastic | White | 120 psi @ 72° F | 000000000 | 000000 |
1/2 | PFA Plastic | White | 100 psi @ 72° F | 000000000 | 000000 |
3/4 | PFA Plastic | White | 70 psi @ 72° F | 000000000 | 000000 |
Non-Hardening Thread Sealant (8-oz. Brush-Top Can) | 000000 | Each | 000000 |

Pipe Size | Drive Size | Material | Color | Max. Pressure | Each | |
NPT Threads | ||||||
---|---|---|---|---|---|---|
1/8 | 1/2" | PFA Plastic | White | 120 psi @ 72° F | 000000000 | 000000 |
1/4 | 5/8" | PFA Plastic | White | 120 psi @ 72° F | 000000000 | 00000 |
3/8 | 13/16" | PFA Plastic | White | 120 psi @ 72° F | 000000000 | 00000 |
1/2 | 15/16" | PFA Plastic | White | 100 psi @ 72° F | 000000000 | 00000 |
3/4 | 1 3/16" | PFA Plastic | White | 70 psi @ 72° F | 000000000 | 00000 |
Non-Hardening Thread Sealant (8-oz. Brush-Top Can) | 000000 | Each | 000000 |
Stainless Steel Push-to-Connect Fittings for Food and Beverage

- Temperature Range: 0° to 240° F
- Tubing: Use with Nylon, PFA, Polyethylene, or TPU Plastic
- Specifications Met: FDA Compliant 21 CFR 177.1380, ISO 14743
Create corrosion-resistant connections in food and beverage lines with just a push. Also known as instant fittings, these fittings have an internal gripping ring and an O-ring that hold tight to tubing. To disconnect the fittings, push the release ring and pull the tubing out of the fitting. A smooth exterior with rounded edges prevents buildup of grime and contaminants for effective cleaning. With a 316 stainless steel body, they maintain their strength even when exposed to frequent washdowns and the harshest chemicals, including bleach, chlorine, and phosphoric acid. They’re also more durable than plastic fittings. FDA compliant, these fittings are approved for direct contact with food. Use them with low pressure and with firm or hard tubing only.

For Tube OD | Pipe Size | Material | Max. Pressure | Each | |
NPT Threads | |||||
---|---|---|---|---|---|
1/4" | 1/8 | 316 Stainless Steel | 430 psi @ 72° F | 0000000 | 000000 |
1/4" | 1/4 | 316 Stainless Steel | 430 psi @ 72° F | 0000000 | 00000 |
3/8" | 1/4 | 316 Stainless Steel | 430 psi @ 72° F | 0000000 | 00000 |
3/8" | 3/8 | 316 Stainless Steel | 430 psi @ 72° F | 0000000 | 00000 |
1/2" | 1/4 | 316 Stainless Steel | 430 psi @ 72° F | 0000000 | 00000 |
1/2" | 3/8 | 316 Stainless Steel | 430 psi @ 72° F | 0000000 | 000000 |
1/2" | 1/2 | 316 Stainless Steel | 430 psi @ 72° F | 0000000 | 000000 |
4mm | 1/8 | 316 Stainless Steel | 430 psi @ 72° F | 0000000 | 00000 |
6mm | 1/8 | 316 Stainless Steel | 430 psi @ 72° F | 0000000 | 00000 |
6mm | 1/4 | 316 Stainless Steel | 430 psi @ 72° F | 0000000 | 00000 |
8mm | 1/8 | 316 Stainless Steel | 430 psi @ 72° F | 0000000 | 00000 |
8mm | 1/4 | 316 Stainless Steel | 430 psi @ 72° F | 0000000 | 00000 |
10mm | 1/4 | 316 Stainless Steel | 430 psi @ 72° F | 0000000 | 00000 |
10mm | 3/8 | 316 Stainless Steel | 430 psi @ 72° F | 0000000 | 00000 |
12mm | 1/4 | 316 Stainless Steel | 430 psi @ 72° F | 0000000 | 000000 |
12mm | 3/8 | 316 Stainless Steel | 430 psi @ 72° F | 0000000 | 000000 |
12mm | 1/2 | 316 Stainless Steel | 430 psi @ 72° F | 0000000 | 000000 |

Fittings with tube stem insert into the push-to-connect end of another fitting in place of a length of tubing.

For Tube OD | Pipe Size | Material | Max. Pressure | Each | |
NPT Threads | |||||
---|---|---|---|---|---|
1/4" | 1/8 | 316 Stainless Steel | 290 psi @ 72° F | 0000000 | 000000 |
1/4" | 1/4 | 316 Stainless Steel | 290 psi @ 72° F | 0000000 | 000000 |
3/8" | 1/4 | 316 Stainless Steel | 290 psi @ 72° F | 0000000 | 000000 |
3/8" | 3/8 | 316 Stainless Steel | 290 psi @ 72° F | 0000000 | 000000 |
1/2" | 1/4 | 316 Stainless Steel | 290 psi @ 72° F | 0000000 | 000000 |
1/2" | 3/8 | 316 Stainless Steel | 290 psi @ 72° F | 0000000 | 000000 |
1/2" | 1/2 | 316 Stainless Steel | 290 psi @ 72° F | 0000000 | 000000 |
6mm | 1/8 | 316 Stainless Steel | 290 psi @ 72° F | 0000000 | 00000 |
6mm | 1/4 | 316 Stainless Steel | 290 psi @ 72° F | 0000000 | 00000 |
8mm | 1/8 | 316 Stainless Steel | 290 psi @ 72° F | 0000000 | 000000 |
8mm | 1/4 | 316 Stainless Steel | 290 psi @ 72° F | 0000000 | 000000 |
10mm | 1/4 | 316 Stainless Steel | 290 psi @ 72° F | 0000000 | 000000 |
10mm | 3/8 | 316 Stainless Steel | 290 psi @ 72° F | 0000000 | 000000 |
12mm | 1/4 | 316 Stainless Steel | 290 psi @ 72° F | 0000000 | 000000 |
12mm | 3/8 | 316 Stainless Steel | 290 psi @ 72° F | 0000000 | 000000 |
12mm | 1/2 | 316 Stainless Steel | 290 psi @ 72° F | 0000000 | 000000 |
Compression Fittings for Plastic Tubing—Chemicals


- For Use With: PFA Plastic: Hydrochloric Acid, Sulfuric Acid
PTFE Plastic: Alcohol, Ammonia, Benzoic Acid, Bleach, Bromine, Coolant, Fluoboric Acid, Hydrochloric Acid, Hydrofluoric Acid, Nitric Acid, Organic Solvents, Sodium Carbonate, Sulfuric Acid - Temperature Range: PFA Plastic: 0° to 350° F
PTFE Plastic: -40° to 185° F - Tubing: PFA Plastic: Use with hard (Durometer 50D-65D) PFA or PTFE plastic
PTFE Plastic: Use with hard (Durometer 60D) PFA or PTFE plastic
A sleeve (ferrule) compresses the tubing as you tighten the nut, creating a strong seal. The nut and sleeve are included. Fittings are also known as flareless fittings. Fittings that include a gripper sleeve on the tubing create an even tighter seal.
PFA fittings stand up to harsh substances. They’re made through a melting process. PTFE fittings are highly resistant to most acids, alcohols, detergents, and solvents. They’re made by machining. Their nut is made of PVDF, which is resistant to halogens such as chlorine and bromine, strong acids such as hydrofluoric and nitric acids, and organic solvents.

For Tube OD | Pipe Size | Material | Color | Max. Pressure | Each | |
NPT Threads | ||||||
---|---|---|---|---|---|---|
1/8" | 1/8 | PFA Plastic | White | 120 psi @ 72° F | 00000000 | 000000 |
1/8" | 1/4 | PFA Plastic | White | 125 psi @ 72° F | 000000000 | 000000 |
1/4" | 1/8 | PFA Plastic | White | 120 psi @ 72° F | 00000000 | 00000 |
1/4" | 1/4 | PFA Plastic | White | 120 psi @ 72° F | 00000000 | 00000 |
1/4" | 3/8 | PFA Plastic | White | 120 psi @ 72° F | 00000000 | 00000 |
1/4" | 1/2 | PFA Plastic | White | 120 psi @ 72° F | 00000000 | 00000 |
1/4" | 3/4 | PFA Plastic | White | 125 psi @ 72° F | 000000000 | 000000 |
3/8" | 1/8 | PFA Plastic | White | 125 psi @ 72° F | 000000000 | 000000 |
3/8" | 1/4 | PFA Plastic | White | 120 psi @ 72° F | 00000000 | 00000 |
3/8" | 3/8 | PFA Plastic | White | 120 psi @ 72° F | 00000000 | 00000 |
3/8" | 1/2 | PFA Plastic | White | 120 psi @ 72° F | 00000000 | 00000 |
1/2" | 1/4 | PFA Plastic | White | 120 psi @ 72° F | 00000000 | 00000 |
1/2" | 3/8 | PFA Plastic | White | 120 psi @ 72° F | 00000000 | 00000 |
1/2" | 1/2 | PFA Plastic | White | 120 psi @ 72° F | 00000000 | 00000 |
1/2" | 3/4 | PFA Plastic | White | 125 psi @ 72° F | 000000000 | 000000 |
3/4" | 1/2 | PFA Plastic | White | 125 psi @ 72° F | 000000000 | 000000 |
3/4" | 3/4 | PFA Plastic | White | 120 psi @ 72° F | 00000000 | 000000 |
4mm | 1/8 | PTFE Plastic | White | 100 psi @ 72° F | 000000000 | 00000 |
6mm | 1/8 | PTFE Plastic | White | 100 psi @ 72° F | 000000000 | 00000 |
6mm | 1/4 | PTFE Plastic | White | 100 psi @ 72° F | 000000000 | 00000 |
8mm | 1/4 | PTFE Plastic | White | 100 psi @ 72° F | 000000000 | 00000 |
10mm | 1/4 | PTFE Plastic | White | 100 psi @ 72° F | 000000000 | 000000 |
10mm | 3/8 | PTFE Plastic | White | 100 psi @ 72° F | 000000000 | 00000 |
12mm | 3/8 | PTFE Plastic | White | 80 psi @ 72° F | 000000000 | 00000 |
12mm | 1/2 | PTFE Plastic | White | 80 psi @ 72° F | 000000000 | 00000 |

For Tube OD | Pipe Size | Material | Color | Max. Pressure | Each | |
NPT Threads | ||||||
---|---|---|---|---|---|---|
1/8" | 1/8 | PFA Plastic | White | 120 psi @ 72° F | 00000000 | 000000 |
1/8" | 1/4 | PFA Plastic | White | 125 psi @ 72° F | 000000000 | 000000 |
1/4" | 1/8 | PFA Plastic | White | 120 psi @ 72° F | 00000000 | 000000 |
1/4" | 1/4 | PFA Plastic | White | 120 psi @ 72° F | 00000000 | 000000 |
1/4" | 3/8 | PFA Plastic | White | 120 psi @ 72° F | 00000000 | 000000 |
1/4" | 1/2 | PFA Plastic | White | 120 psi @ 72° F | 00000000 | 000000 |
3/8" | 1/4 | PFA Plastic | White | 120 psi @ 72° F | 00000000 | 000000 |
3/8" | 3/8 | PFA Plastic | White | 120 psi @ 72° F | 00000000 | 000000 |
3/8" | 1/2 | PFA Plastic | White | 120 psi @ 72° F | 00000000 | 000000 |
1/2" | 1/4 | PFA Plastic | White | 120 psi @ 72° F | 00000000 | 000000 |
1/2" | 3/8 | PFA Plastic | White | 120 psi @ 72° F | 00000000 | 000000 |
1/2" | 1/2 | PFA Plastic | White | 120 psi @ 72° F | 00000000 | 000000 |
1/2" | 3/4 | PFA Plastic | White | 125 psi @ 72° F | 000000000 | 000000 |
3/4" | 3/4 | PFA Plastic | White | 120 psi @ 72° F | 00000000 | 000000 |
10mm | 3/8 | PTFE Plastic | White | 100 psi @ 72° F | 000000000 | 000000 |

Through-wall fittings are also known as bulkhead couplings and panel-mount couplings; they mount through your wall or panel to create an inlet or outlet.
For Tube OD | Pipe Size | Material | Color | Max. Pressure | For Hole Dia. | For Max. Wall Thick. | Each | |
NPT Threads | ||||||||
---|---|---|---|---|---|---|---|---|
1/4" | 1/4 | PFA Plastic | White | 120 psi @ 72° F | 1/2" | 1/4" | 000000000 | 0000000 |
3/8" | 3/8 | PFA Plastic | White | 120 psi @ 72° F | 5/8" | 1/4" | 000000000 | 000000 |
1/2" | 1/2 | PFA Plastic | White | 120 psi @ 72° F | 3/4" | 1/4" | 000000000 | 000000 |
3/4" | 3/4 | PFA Plastic | White | 120 psi @ 72° F | 1" | 1/2" | 000000000 | 000000 |

Through-wall fittings are also known as bulkhead couplings and panel-mount couplings; they mount through your wall or panel to create an inlet or outlet.
For Tube OD | Material | Color | Max. Pressure | For Hole Dia. | For Max. Wall Thick. | Each | |
1/8" | PFA Plastic | White | 125 psi @ 72° F | 5/16" | 1/4" | 000000000 | 0000000 |
1/4" | PFA Plastic | White | 125 psi @ 72° F | 1/2" | 1/4" | 000000000 | 000000 |
3/8" | PFA Plastic | White | 125 psi @ 72° F | 5/8" | 1/4" | 000000000 | 000000 |
1/2" | PFA Plastic | White | 125 psi @ 72° F | 3/4" | 1/4" | 000000000 | 000000 |
3/4" | PFA Plastic | White | 125 psi @ 72° F | 1" | 1/4" | 000000000 | 000000 |

For Tube OD (A) | For Tube OD (B) | Material | Color | Max. Pressure | Each | |
1/4" | 1/8" | PFA Plastic | White | 125 psi @ 72° F | 000000000 | 0000000 |
3/8" | 1/4" | PFA Plastic | White | 125 psi @ 72° F | 000000000 | 000000 |
1/2" | 1/8" | PFA Plastic | White | 125 psi @ 72° F | 000000000 | 000000 |
1/2" | 1/4" | PFA Plastic | White | 125 psi @ 72° F | 000000000 | 000000 |
1/2" | 3/8" | PFA Plastic | White | 125 psi @ 72° F | 000000000 | 000000 |
3/4" | 1/2" | PFA Plastic | White | 125 psi @ 72° F | 000000000 | 000000 |

For Tube OD | Pipe Size | Material | Color | Max. Pressure | Each | |
NPT Threads | ||||||
---|---|---|---|---|---|---|
1/8" | 1/8 | PFA Plastic | White | 120 psi @ 72° F | 00000000 | 000000 |
1/8" | 1/4 | PFA Plastic | White | 125 psi @ 72° F | 000000000 | 000000 |
1/4" | 1/8 | PFA Plastic | White | 120 psi @ 72° F | 00000000 | 00000 |
1/4" | 1/4 | PFA Plastic | White | 120 psi @ 72° F | 00000000 | 00000 |
1/4" | 3/8 | PFA Plastic | White | 120 psi @ 72° F | 000000000 | 00000 |
1/4" | 1/2 | PFA Plastic | White | 120 psi @ 72° F | 000000000 | 00000 |
3/8" | 1/4 | PFA Plastic | White | 120 psi @ 72° F | 00000000 | 00000 |
3/8" | 3/8 | PFA Plastic | White | 120 psi @ 72° F | 00000000 | 00000 |
3/8" | 1/2 | PFA Plastic | White | 120 psi @ 72° F | 00000000 | 00000 |
1/2" | 1/4 | PFA Plastic | White | 120 psi @ 72° F | 00000000 | 00000 |
1/2" | 3/8 | PFA Plastic | White | 120 psi @ 72° F | 00000000 | 00000 |
1/2" | 1/2 | PFA Plastic | White | 120 psi @ 72° F | 00000000 | 00000 |
3/4" | 1/2 | PFA Plastic | White | 125 psi @ 72° F | 000000000 | 000000 |
3/4" | 3/4 | PFA Plastic | White | 120 psi @ 72° F | 000000000 | 000000 |
6mm | 1/8 | PTFE Plastic | White | 100 psi @ 72° F | 000000000 | 00000 |
6mm | 1/4 | PTFE Plastic | White | 100 psi @ 72° F | 000000000 | 00000 |
10mm | 3/8 | PTFE Plastic | White | 100 psi @ 72° F | 000000000 | 000000 |

Through-wall fittings are also known as bulkhead couplings and panel-mount couplings; they mount through your wall or panel to create an inlet or outlet.
For Tube OD | Material | Color | Max. Pressure | For Hole Dia. | For Max. Wall Thick. | Each | |
1/4" | PFA Plastic | White | 125 psi @ 72° F | 1/2" | 1/4" | 000000000 | 0000000 |

Inline tees are also known as branch tees.
For Tube OD | Pipe Size | Material | Color | Max. Pressure | Each | |
NPT Threads | ||||||
---|---|---|---|---|---|---|
1/8" | 1/8 | PFA Plastic | White | 120 psi @ 72° F | 00000000 | 0000000 |
1/8" | 1/4 | PFA Plastic | White | 125 psi @ 72° F | 000000000 | 000000 |
1/4" | 1/8 | PFA Plastic | White | 120 psi @ 72° F | 00000000 | 000000 |
1/4" | 1/4 | PFA Plastic | White | 120 psi @ 72° F | 00000000 | 000000 |
3/8" | 1/4 | PFA Plastic | White | 120 psi @ 72° F | 000000000 | 000000 |
3/8" | 3/8 | PFA Plastic | White | 120 psi @ 72° F | 00000000 | 000000 |
3/8" | 1/2 | PFA Plastic | White | 120 psi @ 72° F | 000000000 | 000000 |
1/2" | 1/4 | PFA Plastic | White | 120 psi @ 72° F | 000000000 | 000000 |
1/2" | 1/2 | PFA Plastic | White | 120 psi @ 72° F | 000000000 | 000000 |
3/4" | 3/4 | PFA Plastic | White | 120 psi @ 72° F | 00000000 | 000000 |
Panel-Mount Threaded On/Off Valves
Access the handle of these valves while protecting your line behind an instrument panel. They have threads and a hex nut below the handle for panel mounting.
316 stainless steel valves are more corrosion resistant than brass valves.
Standard-port valves slightly restrict flow.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

- Valve Type: Ball
- For Use With:
316 Stainless Steel: Water, Oil, Air, Nitrogen
Brass: Water, Oil, Air - Seal Material: See table
Pipe Size | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Vacuum Rating, in. of Hg | Seal Material | Port Type | End-to-End Lg. | Panel Cutout Dia. | Each | |
316 Stainless Steel Body | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
NPT Female × NPT Female | ||||||||||
1/8 × 1/8 | 0.5 | 3000 psi @ 70° F | -30° to 295° | 29 | PTFE Plastic | Standard | 1 5/8" | 19/32" | 00000000 | 000000 |
1/4 × 1/4 | 0.9 | 3000 psi @ 70° F | -30° to 295° | 29 | PTFE Plastic | Standard | 2 1/16" | 25/32" | 00000000 | 000000 |
BSPT Female × BSPT Female | ||||||||||
1/8 × 1/8 | 0.5 | 3000 psi @ 70° F | -30° to 295° | 29 | PTFE Plastic | Standard | 1 5/8" | 19/32" | 00000000 | 000000 |
1/4 × 1/4 | 0.9 | 3000 psi @ 70° F | -30° to 295° | 29 | PTFE Plastic | Standard | 2 1/16" | 25/32" | 00000000 | 000000 |

- Valve Type: Ball
- For Use With:
316 Stainless Steel: Water, Oil, Air, Nitrogen
Brass: Water, Oil, Air - Seal Material:
316 Stainless Steel: PTFE Plastic
Brass: Fluoroelastomer Rubber
Pipe Size | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Vacuum Rating, in. of Hg | Port Type | Port-to-Port Lg. | Panel Cutout Dia. | Each | |
316 Stainless Steel Body | |||||||||
---|---|---|---|---|---|---|---|---|---|
NPT Female × NPT Female | |||||||||
1/8 × 1/8 | 0.3 | 3000 psi @ 70° F | -30° to 295° | 29 | Standard | 13/16" | 19/32" | 00000000 | 0000000 |
1/4 × 1/4 | 0.7 | 3000 psi @ 70° F | -30° to 295° | 29 | Standard | 1" | 25/32" | 00000000 | 000000 |
3/8 × 3/8 | 1.5 | 2500 psi @ 70° F | -30° to 295° | 29 | Standard | 1 1/4" | 1 1/8" | 00000000 | 000000 |