Pillow-Block Linear Ball Bearings

		Overall					Load Capacity, lb.		Temp., ° F			Mounting Holes
	For Shaft Dia.	Lg.	Wd.	Ht.	Ctr. Ht.	With End Seals	Dynamic	Static	Min.	Max.	For Shaft Material	No. of	Dia.		Each
Acetal Bearings with 6061 Aluminum Housing



		1/4"	1 3/16"	1 5/8"	13/16"	7/16"	Yes	60	80	-4	176	Stainless Steel, Steel	4	5/32"	0000000	000000


		3/8"	1 5/16"	1 3/4"	15/16"	1/2"	Yes	95	120	-4	176	Stainless Steel, Steel	4	5/32"	0000000	00000
		1/2"	1 11/16"	2"	1 1/4"	11/16"	Yes	230	290	-4	176	Stainless Steel, Steel	4	5/32"	000000	00000
		5/8"	1 15/16"	2 1/2"	1 5/8"	7/8"	Yes	400	500	-4	176	Stainless Steel, Steel	4	3/16"	000000	00000
		3/4"	2 1/16"	2 3/4"	1 3/4"	15/16"	Yes	470	590	-4	176	Stainless Steel, Steel	4	3/16"	000000	00000
		1"	2 13/16"	3 1/4"	2 3/16"	1 3/16"	Yes	850	1,000	-4	176	Stainless Steel, Steel	4	7/32"	000000	000000
		1 1/4"	3 5/8"	4"	2 13/16"	1 1/2"	Yes	1,200	1,500	-4	176	Stainless Steel, Steel	4	7/32"	000000	000000
		1 1/2"	4"	4 3/4"	3 1/4"	1 3/4"	Yes	1,400	1,800	-4	176	Stainless Steel, Steel	4	9/32"	000000	000000
		2"	5"	6"	4 1/16"	2 1/8"	Yes	2,400	3,000	-4	176	Stainless Steel, Steel	4	13/32"	0000000	000000

Fixed Alignment

Fixed-alignment bearings are for use where shaft misalignment is unlikely.

		Overall					Load Capacity, lb.		Temp., ° F			Mounting Holes
	For Shaft Dia.	Lg.	Wd.	Ht.	Ctr. Ht.	With End Seals	Dynamic	Static	Min.	Max.	For Shaft Material	No. of	Dia.	Thread Size		Each
Acetal Bearings with 6061 Aluminum Housing



		1/4"	2 1/2"	1 5/8"	13/16"	7/16"	Yes	95	160	-4	176	Stainless Steel, Steel	4	5/32"	—	0000000	0000000


		3/8"	2 3/4"	1 3/4"	15/16"	1/2"	Yes	150	240	-4	176	Stainless Steel, Steel	4	5/32"	—	0000000	000000
		1/2"	3 1/2"	2"	1 1/4"	11/16"	Yes	370	580	-4	176	Stainless Steel, Steel	4	5/32"	—	000000	000000
		5/8"	4"	2 1/2"	1 5/8"	7/8"	Yes	640	1,000	-4	176	Stainless Steel, Steel	4	3/16"	—	000000	000000
		3/4"	4 1/2"	2 3/4"	1 3/4"	15/16"	Yes	750	1,100	-4	176	Stainless Steel, Steel	4	3/16"	—	000000	000000
		1"	6"	3 1/4"	2 3/16"	1 3/16"	Yes	1,300	2,100	-4	176	Stainless Steel, Steel	4	7/32"	—	0000000	000000
		1 1/4"	7 1/2"	4"	2 13/16"	1 1/2"	Yes	1,900	3,000	-4	176	Stainless Steel, Steel	4	7/32"	—	0000000	000000
		1 1/2"	9"	4 3/4"	3 1/4"	1 3/4"	Yes	2,300	3,700	-4	176	Stainless Steel, Steel	4	9/32"	—	0000000	000000


		Steel Bearings with 6061 Aluminum Housing



				3 mm	13 mm	16 mm	10 mm	5 mm	Yes	15	23	-4	176	Stainless Steel, Steel	4	2 mm	M2 × 0.4 mm	0000000	00000


				4 mm	15 mm	17 mm	11 mm	5.5 mm	Yes	19	28	-4	176	Stainless Steel, Steel	4	3 mm	M3 × 0.5 mm	0000000	00000
				5 mm	18 mm	22 mm	14 mm	7 mm	Yes	37	46	-4	176	Stainless Steel, Steel	4	3 mm	M3 × 0.5 mm	0000000	00000
				6 mm	25 mm	30 mm	18 mm	9 mm	Yes	46	55	-4	176	Stainless Steel, Steel	4	4 mm	M4 × 0.7 mm	0000000	00000
				8 mm	30 mm	34 mm	22 mm	11 mm	Yes	60	85	-4	176	Stainless Steel, Steel	4	4 mm	M4 × 0.7 mm	0000000	00000
				8 mm	58 mm	34 mm	22 mm	11 mm	Yes	95	175	-4	176	Stainless Steel, Steel	4	4 mm	M4 × 0.7 mm	0000000	000000
				10 mm	35 mm	40 mm	26 mm	13 mm	Yes	80	120	-4	176	Stainless Steel, Steel	4	5 mm	M5 × 0.8 mm	0000000	00000
				10 mm	68 mm	40 mm	26 mm	13 mm	Yes	130	245	-4	176	Stainless Steel, Steel	4	5 mm	M5 × 0.8 mm	0000000	000000
				12 mm	36 mm	42 mm	28 mm	15 mm	Yes	110	175	-4	176	Stainless Steel, Steel	4	5 mm	M5 × 0.8 mm	0000000	00000
				12 mm	70 mm	42 mm	28 mm	15 mm	Yes	180	350	-4	176	Stainless Steel, Steel	4	5 mm	M5 × 0.8 mm	0000000	000000
				16 mm	44 mm	50 mm	38.5 mm	19 mm	Yes	170	260	-4	176	Stainless Steel, Steel	4	5 mm	M5 × 0.8 mm	0000000	00000


				16 mm	85 mm	50 mm	38.5 mm	19 mm	Yes	270	520	-4	176	Stainless Steel, Steel	4	5 mm	M5 × 0.8 mm	0000000	00000
				20 mm	50 mm	54 mm	41 mm	21 mm	Yes	195	305	-4	176	Stainless Steel, Steel	4	6 mm	M6 × 1 mm	0000000	00000
				20 mm	96 mm	54 mm	41 mm	21 mm	Yes	310	615	-4	176	Stainless Steel, Steel	4	6 mm	M6 × 1 mm	0000000	000000
				25 mm	67 mm	76 mm	51.5 mm	26 mm	Yes	220	350	-4	176	Stainless Steel, Steel	4	8 mm	M8 × 1.25 mm	0000000	00000
				25 mm	130 mm	76 mm	51.5 mm	26 mm	Yes	350	700	-4	176	Stainless Steel, Steel	4	8 mm	M8 × 1.25 mm	0000000	000000
				30 mm	72 mm	78 mm	59.5 mm	30 mm	Yes	350	615	-4	176	Stainless Steel, Steel	4	8 mm	M8 × 1.25 mm	0000000	000000
				35 mm	155 mm	90 mm	68 mm	34 mm	Yes	590	1,400	-4	176	Stainless Steel, Steel	4	8 mm	M8 × 1.25 mm	0000000	000000
				40 mm	90 mm	102 mm	78 mm	40 mm	Yes	480	900	-4	176	Stainless Steel, Steel	4	10 mm	M10 × 1.5 mm	0000000	000000
				50 mm	110 mm	122 mm	102 mm	52 mm	Yes	850	1,750	-4	176	Stainless Steel, Steel	4	10 mm	M10 × 1.5 mm	0000000	000000

High-Load Mounted Linear Ball Bearings

Designed to handle heavy loads, these bearings have the highest load capacities of any mounted linear ball bearings we offer. They are for use with round end-supported shafts. End seals keep lubricant in and dirt out.

Self-Aligning with 0.5° Misalignment Capability

Image of Product. Front orientation. Contains Annotated. Linear Bearings. High-Load Mounted Linear Ball Bearings .

Self-aligning bearings compensate for shaft misalignment.

		Overall							Mounting Holes
	For Shaft Dia.	Lg.	Wd.	Ht.	Ctr. Ht.	Dynamic Load Cap., lb.	Max. Temp., ° F	For Shaft Material	No. of	Dia.		Each
Acetal Bearings with Steel Balls in 6061 Aluminum Housing



		1/4"	2 1/2"	1 5/8"	13/16"	7/16"	120	185	Stainless Steel, Steel	4	5/32"	0000000	0000000


		3/8"	2 3/4"	1 3/4"	15/16"	1/2"	200	185	Stainless Steel, Steel	4	5/32"	0000000	000000
		1/2"	1 11/16"	2"	1 1/4"	11/16"	265	185	Stainless Steel, Steel	4	5/32"	0000000	000000
		1/2"	3 1/2"	2"	1 1/4"	11/16"	530	185	Stainless Steel, Steel	4	5/32"	0000000	000000
		5/8"	1 15/16"	2 1/2"	1 5/8"	7/8"	620	185	Stainless Steel, Steel	4	3/16"	0000000	000000
		5/8"	4"	2 1/2"	1 5/8"	7/8"	1,200	185	Stainless Steel, Steel	4	3/16"	0000000	000000
		3/4"	2 1/16"	2 3/4"	1 3/4"	15/16"	1,100	185	Stainless Steel, Steel	4	3/16"	0000000	000000
		3/4"	4 1/2"	2 3/4"	1 3/4"	15/16"	2,200	185	Stainless Steel, Steel	4	3/16"	0000000	000000
		1"	2 13/16"	3 1/4"	2 3/16"	1 3/16"	1,900	185	Stainless Steel, Steel	4	7/32"	0000000	000000
		1"	6"	3 1/4"	2 3/16"	1 3/16"	3,800	185	Stainless Steel, Steel	4	7/32"	0000000	000000
		1 1/4"	3 5/8"	4"	2 13/16"	1 1/2"	2,300	185	Stainless Steel, Steel	4	7/32"	0000000	000000


		1 1/4"	7 1/2"	4"	2 13/16"	1 1/2"	4,700	185	Stainless Steel, Steel	4	7/32"	0000000	000000
		1 1/2"	4"	4 3/4"	3 1/4"	1 3/4"	3,800	185	Stainless Steel, Steel	4	9/32"	0000000	000000
		1 1/2"	9"	4 3/4"	3 1/4"	1 3/4"	7,700	185	Stainless Steel, Steel	4	9/32"	0000000	000000
		2"	5"	6"	4 1/16"	2 1/8"	3,000	185	Stainless Steel, Steel	4	13/32"	0000000	000000
		16 mm	44 mm	50 mm	37 mm	19 mm	490	185	Stainless Steel, Steel	4	4.3 mm	0000000	000000
		20 mm	50 mm	54 mm	41 mm	21 mm	890	185	Stainless Steel, Steel	4	5.2 mm	0000000	000000
		25 mm	67 mm	76 mm	51 mm	26 mm	1,500	185	Stainless Steel, Steel	4	7 mm	0000000	000000
		30 mm	72 mm	78 mm	57 mm	30 mm	1,850	185	Stainless Steel, Steel	4	7 mm	0000000	000000
		40 mm	90 mm	102 mm	75 mm	40 mm	3,050	185	Stainless Steel, Steel	4	8.7 mm	0000000	000000

Fixed Alignment

Fixed-alignment bearings are for use where shaft misalignment is unlikely.

		Overall, mm							Mounting Holes
	For Shaft Dia., mm	Lg.	Wd.	Ht.	Ctr. Ht., mm	Dynamic Load Cap., lb.	Max. Temp., ° F	For Shaft Material	No. of	Dia., mm		Each
Acetal Bearings with Steel Balls in 6061 Aluminum Housing



		16	85	50	37	19	980	185	Stainless Steel, Steel	4	4.3	0000000	0000000


		20	96	54	41	20	1,750	185	Stainless Steel, Steel	4	5.2	0000000	000000
		25	130	76	51	25	3,000	185	Stainless Steel, Steel	4	7	0000000	000000
		30	140	78	57	30	3,700	185	Stainless Steel, Steel	4	7	0000000	000000
		40	175	102	75	40	6,150	185	Stainless Steel, Steel	4	8.7	0000000	000000

Corrosion-Resistant Flange-Mounted Linear Ball Bearings

The bearing, housing, and balls of these mounted bearings are stainless steel for excellent corrosion resistance. The flanged housing is good for vertical linear motion applications. All bearings are for use with round end-supported shafts and have a fixed-alignment design for use where shaft misalignment is unlikely. End seals keep lubricant in and dirt out.

Fixed Alignment

		Overall			Flange				Load Capacity, lb.				Mounting Holes
	For Shaft Dia.	Lg.	Wd.	Ht.	Thk.	OD	Bolt Circle Dia.	OD	Dynamic	Static	Temp. Range, ° F	For Shaft Material	No. of	Dia.		Each
440C Stainless Steel Bearings with Round Flange



		1/4"	3/4"	1 1/4"	1 1/4"	7/32"	1 1/4"	7/8"	1/2"	46	55	-4 to 248	Stainless Steel, Steel	4	5/32"	00000000	000000


		1/4"	1 3/8"	1 1/4"	1 1/4"	7/32"	1 1/4"	7/8"	1/2"	70	115	-4 to 248	Stainless Steel, Steel	4	5/32"	00000000	000000
		3/8"	7/8"	1 1/2"	1 1/2"	1/4"	1 1/2"	1 1/16"	5/8"	50	70	-4 to 248	Stainless Steel, Steel	4	3/16"	0000000	00000
		3/8"	1 5/8"	1 1/2"	1 1/2"	1/4"	1 1/2"	1 1/16"	5/8"	75	140	-4 to 248	Stainless Steel, Steel	4	3/16"	0000000	000000
		1/2"	1 1/4"	1 3/4"	1 3/4"	1/4"	1 3/4"	1 5/16"	7/8"	110	175	-4 to 248	Stainless Steel, Steel	4	3/16"	0000000	00000
		1/2"	2 3/8"	1 3/4"	1 3/4"	1/4"	1 3/4"	1 5/16"	7/8"	180	350	-4 to 248	Stainless Steel, Steel	4	3/16"	0000000	000000
		5/8"	1 1/2"	2"	2"	1/4"	2"	1 9/16"	1 1/8"	170	260	-4 to 248	Stainless Steel, Steel	4	3/16"	00000000	00000
		5/8"	2 13/16"	2"	2"	1/4"	2"	1 9/16"	1 1/8"	270	520	-4 to 248	Stainless Steel, Steel	4	3/16"	00000000	000000
		3/4"	1 5/8"	2 3/16"	2 3/16"	5/16"	2 3/16"	1 23/32"	1 1/4"	190	305	-4 to 248	Stainless Steel, Steel	4	7/32"	0000000	000000
		3/4"	3 1/8"	2 3/16"	2 3/16"	5/16"	2 3/16"	1 23/32"	1 1/4"	305	615	-4 to 248	Stainless Steel, Steel	4	7/32"	0000000	000000
		1"	2 1/4"	2 1/2"	2 1/2"	5/16"	2 1/2"	2 1/32"	1 9/16"	220	350	-4 to 248	Stainless Steel, Steel	4	7/32"	0000000	000000


		1"	4 5/16"	2 1/2"	2 1/2"	5/16"	2 1/2"	2 1/32"	1 9/16"	350	705	-4 to 248	Stainless Steel, Steel	4	7/32"	0000000	000000
		1 1/2"	3"	3 3/4"	3 3/4"	1/2"	3 3/4"	3"	2 3/8"	485	900	-4 to 248	Stainless Steel, Steel	4	11/32"	0000000	000000
		1 1/2"	5 11/16"	3 3/4"	3 3/4"	1/2"	3 3/4"	3 1/16"	2 3/8"	770	1,800	-4 to 248	Stainless Steel, Steel	4	11/32"	00000000	000000
		6 mm	19 mm	28 mm	28 mm	5 mm	28 mm	20 mm	12 mm	45	55	-4 to 248	Stainless Steel, Steel	4	3.5 mm	0000000	00000
		8 mm	17 mm	32 mm	32 mm	5 mm	32 mm	24 mm	15 mm	35	45	-4 to 248	Stainless Steel, Steel	4	3.5 mm	0000000	00000
		10 mm	29 mm	40 mm	40 mm	6 mm	40 mm	29 mm	19 mm	80	120	-4 to 248	Stainless Steel, Steel	4	4.5 mm	0000000	00000
		12 mm	30 mm	42 mm	42 mm	6 mm	42 mm	32 mm	21 mm	110	175	-4 to 248	Stainless Steel, Steel	4	4.5 mm	0000000	00000
		16 mm	37 mm	48 mm	48 mm	6 mm	48 mm	38 mm	28 mm	170	265	-4 to 248	Stainless Steel, Steel	4	4.5 mm	0000000	00000
		20 mm	42 mm	54 mm	54 mm	8 mm	54 mm	43 mm	32 mm	190	305	-4 to 248	Stainless Steel, Steel	4	5.5 mm	0000000	000000
		20 mm	80 mm	54 mm	54 mm	8 mm	54 mm	43 mm	32 mm	310	610	-4 to 248	Stainless Steel, Steel	4	5.5 mm	00000000	000000


		25 mm	59 mm	62 mm	62 mm	8 mm	62 mm	51 mm	40 mm	220	350	-4 to 248	Stainless Steel, Steel	4	5.5 mm	0000000	000000
		30 mm	64 mm	74 mm	74 mm	10 mm	74 mm	60 mm	45 mm	350	610	-4 to 248	Stainless Steel, Steel	4	6.6 mm	0000000	000000
		40 mm	80 mm	96 mm	96 mm	13 mm	96 mm	78 mm	60 mm	485	900	-4 to 248	Stainless Steel, Steel	4	9 mm	0000000	000000


		440C Stainless Steel Bearings with Square Flange



				1/4"	3/4"	1"	1"	7/32"	—	7/8"	1/2"	46	55	-4 to 248	Stainless Steel, Steel	4	5/32"	00000000	00000


				3/8"	7/8"	1 1/4"	1 1/4"	1/4"	—	1 1/16"	5/8"	50	70	-4 to 248	Stainless Steel, Steel	4	3/16"	0000000	00000
				3/8"	1 19/32"	1 1/4"	1 1/4"	1/4"	—	1 1/16"	5/8"	75	140	-4 to 248	Stainless Steel, Steel	4	3/16"	00000000	000000
				1/2"	1 1/4"	1 3/8"	1 3/8"	1/4"	—	1 5/16"	7/8"	110	175	-4 to 248	Stainless Steel, Steel	4	3/16"	0000000	00000
				1/2"	2 3/8"	1 3/8"	1 3/8"	1/4"	—	1 5/16"	7/8"	180	350	-4 to 248	Stainless Steel, Steel	4	3/16"	00000000	000000
				5/8"	1 1/2"	1 1/2"	1 1/2"	1/4"	—	1 9/16"	1 1/8"	170	260	-4 to 248	Stainless Steel, Steel	4	3/16"	00000000	000000
				5/8"	2 13/16"	1 1/2"	1 1/2"	1/4"	—	1 9/16"	1 1/8"	270	520	-4 to 248	Stainless Steel, Steel	4	3/16"	00000000	000000
				3/4"	1 5/8"	1 11/16"	1 11/16"	5/16"	—	1 23/32"	1 1/4"	190	305	-4 to 248	Stainless Steel, Steel	4	7/32"	0000000	000000
				3/4"	3 3/32"	1 11/16"	1 11/16"	5/16"	—	1 23/32"	1 1/4"	300	610	-4 to 248	Stainless Steel, Steel	4	7/32"	00000000	000000
				1"	2 1/4"	2"	2"	5/16"	—	2 1/32"	1 9/16"	220	350	-4 to 248	Stainless Steel, Steel	4	7/32"	0000000	000000
				1"	4 9/32"	2"	2"	5/16"	—	2 1/32"	1 9/16"	350	700	-4 to 248	Stainless Steel, Steel	4	7/32"	00000000	000000


				1 1/4"	2 5/8"	2 1/2"	2 1/2"	3/8"	—	2 9/16"	2"	350	610	-4 to 248	Stainless Steel, Steel	4	9/32"	0000000	000000
				1 1/2"	3"	3"	3"	1/2"	—	3 1/16"	2 3/8"	485	900	-4 to 248	Stainless Steel, Steel	4	11/32"	0000000	000000
				2"	4"	3 1/2"	3 1/2"	1/2"	—	3 11/16"	3"	855	1,780	-4 to 248	Stainless Steel, Steel	4	11/32"	0000000	000000
				6 mm	19 mm	22 mm	22 mm	5 mm	—	20 mm	12 mm	45	55	-4 to 248	Stainless Steel, Steel	4	3.5 mm	0000000	00000
				8 mm	17 mm	25 mm	25 mm	5 mm	—	24 mm	15 mm	35	45	-4 to 248	Stainless Steel, Steel	4	3.5 mm	0000000	00000
				10 mm	29 mm	30 mm	30 mm	6 mm	—	29 mm	19 mm	80	120	-4 to 248	Stainless Steel, Steel	4	4.5 mm	0000000	00000
				12 mm	30 mm	32 mm	32 mm	6 mm	—	32 mm	21 mm	110	175	-4 to 248	Stainless Steel, Steel	4	4.5 mm	0000000	00000
				12 mm	57 mm	32 mm	32 mm	6 mm	—	32 mm	21 mm	180	350	-4 to 248	Stainless Steel, Steel	4	4.5 mm	00000000	000000
				16 mm	37 mm	37 mm	37 mm	6 mm	—	38 mm	28 mm	170	265	-4 to 248	Stainless Steel, Steel	4	4.5 mm	0000000	000000
				20 mm	42 mm	42 mm	42 mm	8 mm	—	43 mm	32 mm	190	305	-4 to 248	Stainless Steel, Steel	4	5.5 mm	0000000	000000


25 mm	59 mm			50 mm	50 mm	8 mm	—	51 mm	40 mm	220	350	-4 to 248	Stainless Steel, Steel	4	5.5 mm	00000000	000000
25 mm	112 mm			50 mm	50 mm	8 mm	—	51 mm	40 mm	350	700	-4 to 248	Stainless Steel, Steel	4	5.5 mm	00000000	000000

Corrosion-Resistant Mounted Linear Ball Bearings

Outdoor as well as mild chemical environments are no problem for these bearings. They have stainless steel balls for corrosion resistance. All bearings are for use with round end-supported shafts and have end seals to keep lubricant in and dirt out.

Self-Aligning with 1° Misalignment Capability

Image of Product. Front orientation. Contains Annotated. Linear Bearings. Corrosion-Resistant Mounted Linear Ball Bearings , Self-Aligning, 6061 Aluminum Housing.

6061 Aluminum Housing

Self-aligning bearings compensate for shaft misalignment.

6061 Aluminum Housing—Bearings with aluminum housing take on heavier loads than bearings with an acetal housing.

		Overall				Load Capacity, lb.				Mounting Holes
	For Shaft Dia.	Lg.	Wd.	Ht.	Ctr. Ht.	Dynamic	Static	Temp. Range, ° F	For Shaft Material	No. of	Dia.		Each
Acetal Bearings with Stainless Steel Balls in 6061 Aluminum Housing



		1/4"	1 3/16"	1 5/8"	13/16"	7/16"	13	17	-4 to 176	Stainless Steel, Steel	4	5/32"	0000000	000000


		3/8"	1 5/16"	1 3/4"	15/16"	1/2"	21	26	-4 to 176	Stainless Steel, Steel	4	5/32"	0000000	00000
		1/2"	1 11/16"	2"	1 1/4"	11/16"	230	290	-4 to 176	Stainless Steel, Steel	4	5/32"	000000	00000
		5/8"	1 15/16"	2 1/2"	1 5/8"	7/8"	400	500	-4 to 176	Stainless Steel, Steel	4	3/16"	000000	00000
		3/4"	2 1/16"	2 3/4"	1 3/4"	15/16"	470	590	-4 to 176	Stainless Steel, Steel	4	3/16"	000000	000000
		1"	2 13/16"	3 1/4"	2 3/16"	1 3/16"	850	1,000	-4 to 176	Stainless Steel, Steel	4	7/32"	000000	000000
		8 mm	32 mm	35 mm	28 mm	15 mm	95	120	-4 to 176	Stainless Steel, Steel	4	4 mm	0000000	000000
		10 mm	36 mm	40 mm	31.5 mm	16 mm	165	210	-4 to 176	Stainless Steel, Steel	4	5 mm	0000000	00000
		12 mm	39 mm	43 mm	35 mm	18 mm	225	290	-4 to 176	Stainless Steel, Steel	4	5 mm	0000000	00000
		20 mm	54 mm	60 mm	50 mm	25 mm	460	590	-4 to 176	Stainless Steel, Steel	4	8 mm	0000000	000000
		30 mm	79 mm	87 mm	70 mm	35 mm	1,200	1,500	-4 to 176	Stainless Steel, Steel	4	10 mm	0000000	000000

Fixed Alignment

Acetal Housing

Fixed-alignment bearings are for use where shaft misalignment is unlikely.

Acetal Housing—Bearings with acetal housing are lighter in weight and more corrosion resistant than bearings with an aluminum housing.

		Overall				Load Capacity, lb.				Mounting Holes
	For Shaft Dia.	Lg.	Wd.	Ht.	Ctr. Ht.	Dynamic	Static	Temp. Range, ° F	For Shaft Material	No. of	Dia.		Each
Steel Bearings with Stainless Steel Balls in Acetal Housing



		1/2"	1 19/32"	2"	1 1/4"	11/16"	110	175	-4 to 176	Stainless Steel, Steel	4	5/32"	0000000	000000


		5/8"	1 27/32"	2 1/2"	1 5/8"	7/8"	170	265	-4 to 176	Stainless Steel, Steel	4	3/16"	0000000	00000
		3/4"	1 31/32"	2 3/4"	1 3/4"	15/16"	190	305	-4 to 176	Stainless Steel, Steel	4	3/16"	0000000	00000
		1"	2 19/32"	3 1/4"	2 3/16"	1 3/16"	220	350	-4 to 176	Stainless Steel, Steel	4	7/32"	0000000	00000

High-Load Mounted Linear Ball Bearings for Support Rail Shafts

Designed to handle heavy loads, these bearings have higher load capacities than comparable standard mounted linear ball bearings for support rails. Use them for applications that require maximum rigidity. All are self-aligning to compensate for shaft misalignment and have end seals to keep lubricant in and dirt out.

Self-Aligning with 0.5° Misalignment Capability

Image of Product. Front orientation. Contains Annotated. Linear Bearings. High-Load Mounted Linear Ball Bearings for Support Rail Shafts .

		Overall								Mounting Holes
	For Shaft Dia.	Lg.	Wd.	Ht.	Ctr. Ht.	Wd.	Dynamic Load Cap., lb.	Max. Temp., ° F	For Shaft Material	No. of	Dia.		Each
Acetal Bearings with Steel Balls in 6061 Aluminum Housing



		1/2"	1 1/2"	2"	1 1/8"	11/16"	5/16"	360	185	Stainless Steel, Steel	4	5/32"	0000000	0000000


		1/2"	3 1/2"	2"	1 1/8"	11/16"	5/16"	720	185	Stainless Steel, Steel	4	5/32"	0000000	000000
		5/8"	1 3/4"	2 1/2"	1 7/16"	7/8"	11/32"	620	185	Stainless Steel, Steel	4	3/16"	0000000	000000
		5/8"	4"	2 1/2"	1 7/16"	7/8"	11/32"	1,200	185	Stainless Steel, Steel	4	3/16"	0000000	000000
		3/4"	1 7/8"	2 3/4"	1 9/16"	15/16"	13/32"	1,100	185	Stainless Steel, Steel	4	3/16"	0000000	000000
		3/4"	4 1/2"	2 3/4"	1 9/16"	15/16"	13/32"	2,200	185	Stainless Steel, Steel	4	3/16"	0000000	000000
		1"	2 5/8"	3 1/4"	2"	1 3/16"	17/32"	1,900	185	Stainless Steel, Steel	4	7/32"	0000000	000000
		1"	6"	3 1/4"	2"	1 3/16"	17/32"	3,800	185	Stainless Steel, Steel	4	7/32"	0000000	000000
		1 1/4"	3 3/8"	4"	2 9/16"	1 1/2"	5/8"	2,300	185	Stainless Steel, Steel	4	7/32"	0000000	000000
		1 1/4"	7 1/2"	4"	2 9/16"	1 1/2"	5/8"	4,700	185	Stainless Steel, Steel	4	7/32"	0000000	000000
		1 1/2"	3 3/4"	4 3/4"	2 15/16"	1 3/4"	3/4"	3,800	185	Stainless Steel, Steel	4	9/32"	0000000	000000


		1 1/2"	9"	4 3/4"	2 15/16"	1 3/4"	3/4"	7,700	185	Stainless Steel, Steel	4	9/32"	0000000	000000
		12 mm	39 mm	43 mm	28 mm	18 mm	7 mm	235	185	Stainless Steel, Steel	2	5 mm	00000000	000000
		16 mm	43 mm	53 mm	35 mm	22 mm	9 mm	490	185	Stainless Steel, Steel	4	6 mm	00000000	000000
		20 mm	54 mm	60 mm	42 mm	25 mm	8 mm	890	185	Stainless Steel, Steel	4	8 mm	00000000	000000
		25 mm	67 mm	78 mm	51 mm	30 mm	13 mm	1,500	185	Stainless Steel, Steel	4	10 mm	00000000	000000
		30 mm	79 mm	87 mm	60 mm	35 mm	14 mm	1,850	185	Stainless Steel, Steel	4	10 mm	00000000	000000

Self-Aligning with 1° Misalignment Capability

		Overall					Load Capacity, lb.				Mounting Holes
	For Shaft Dia.	Lg.	Wd.	Ht.	Ctr. Ht.	Wd.	Dynamic	Static	Temp. Range, ° F	For Shaft Material	No. of	Dia.		Each
Acetal Bearings with Steel Balls in 6061 Aluminum Housing



		2"	4 3/4"	6"	3 21/32"	2 1/8"	15/16"	2,400	3,000	-4 to 176	Stainless Steel, Steel	4	13/32"	0000000	0000000

Mounted Linear Ball Bearings for Support Rail Shafts

Mount these bearings on a support rail shaft for applications requiring maximum rigidity. End seals keep lubricant in and dirt out.

Self-Aligning with 1° Misalignment Capability

Image of Product. Front orientation. Contains Annotated. Linear Bearings. Mounted Linear Ball Bearings for Support Rail Shafts.

Self-aligning bearings compensate for shaft misalignment.

		Overall						Load Capacity, lb.		Temp., ° F			Mounting Holes
	For Shaft Dia.	Lg.	Wd.	Ht.	Ctr. Ht.	Wd.	With End Seals	Dynamic	Static	Min.	Max.	For Shaft Material	No. of	Dia.		Each
Acetal Bearings with 6061 Aluminum Housing



		1/2"	1 1/2"	2"	1 3/32"	11/16"	1/4"	Yes	230	290	-4	176	Stainless Steel, Steel	4	5/32"	0000000	000000


		5/8"	1 3/4"	2 1/2"	1 13/32"	7/8"	5/16"	Yes	400	500	-4	176	Stainless Steel, Steel	4	3/16"	0000000	00000
		3/4"	1 7/8"	2 3/4"	1 17/32"	15/16"	3/8"	Yes	470	590	-4	176	Stainless Steel, Steel	4	3/16"	0000000	00000
		1"	2 5/8"	3 1/4"	1 31/32"	1 3/16"	1/2"	Yes	850	1,000	-4	176	Stainless Steel, Steel	4	7/32"	0000000	000000
		1 1/4"	3 3/8"	4"	2 31/64"	1 1/2"	9/16"	Yes	1,200	1,500	-4	176	Stainless Steel, Steel	4	7/32"	0000000	000000
		1 1/2"	3 3/4"	4 3/4"	2 29/32"	1 3/4"	11/16"	Yes	1,400	1,800	-4	176	Stainless Steel, Steel	4	9/32"	0000000	000000


		Acetal Bearings with Stainless Steel Balls with 6061 Aluminum Housing



				12 mm	39 mm	43 mm	28 mm	18 mm	6.5 mm	Yes	225	290	-4	176	Stainless Steel, Steel	4	5 mm	00000000	00000


				16 mm	43 mm	53 mm	35 mm	22 mm	9 mm	Yes	280	340	-4	176	Stainless Steel, Steel	4	6 mm	00000000	00000
				20 mm	54 mm	60 mm	42 mm	25 mm	9 mm	Yes	460	590	-4	176	Stainless Steel, Steel	4	8 mm	00000000	000000
				25 mm	67 mm	78 mm	51 mm	30 mm	11.5 mm	Yes	840	1,000	-4	176	Stainless Steel, Steel	4	10 mm	00000000	000000
				30 mm	79 mm	87 mm	60 mm	35 mm	14 mm	Yes	1,200	1,500	-4	176	Stainless Steel, Steel	4	10 mm	00000000	000000

Fixed Alignment

Fixed-alignment bearings are for use where shaft misalignment is unlikely.

		Overall						Load Capacity, lb.		Temp., ° F			Mounting Holes
	For Shaft Dia.	Lg.	Wd.	Ht.	Ctr. Ht.	Wd.	With End Seals	Dynamic	Static	Min.	Max.	For Shaft Material	No. of	Dia.		Each
Acetal Bearings with 6061 Aluminum Housing



		1/2"	3 1/2"	2"	1 3/32"	11/16"	1/4"	Yes	370	580	-4	176	Stainless Steel, Steel	4	5/32"	0000000	0000000


		5/8"	4"	2 1/2"	1 13/32"	7/8"	5/16"	Yes	640	1,000	-4	176	Stainless Steel, Steel	4	3/16"	0000000	000000
		3/4"	4 1/2"	2 3/4"	1 17/32"	15/16"	3/8"	Yes	750	1,100	-4	176	Stainless Steel, Steel	4	3/16"	0000000	000000
		1"	6"	3 1/4"	1 31/32"	1 3/16"	1/2"	Yes	1,300	2,100	-4	176	Stainless Steel, Steel	4	7/32"	0000000	000000
		1 1/4"	7 1/2"	4"	2 15/32"	1 1/2"	9/16"	Yes	1,900	3,000	-4	176	Stainless Steel, Steel	4	7/32"	0000000	000000
		1 1/2"	9"	4 3/4"	2 29/32"	1 3/4"	11/16"	Yes	2,300	3,700	-4	176	Stainless Steel, Steel	4	9/32"	0000000	000000

Fixed Alignment with 1° Misalignment Capability

Fixed-alignment bearings are for use where shaft misalignment is unlikely.

		Overall, mm						Load Capacity, lb.		Temp., ° F			Mounting Holes
	For Shaft Dia., mm	Lg.	Wd.	Ht.	Ctr. Ht., mm	Wd., mm	With End Seals	Dynamic	Static	Min.	Max.	For Shaft Material	No. of	Dia., mm		Each
Acetal Bearings with Stainless Steel Balls with 6061 Aluminum Housing



		12	76	43	28	18	6.5	Yes	370	580	-4	176	Stainless Steel, Steel	4	5	00000000	0000000


		16	84	53	35	22	9	Yes	450	690	-4	176	Stainless Steel, Steel	4	6	00000000	000000
		20	104	60	42	25	9	Yes	760	1,150	-4	176	Stainless Steel, Steel	4	8	00000000	000000
		25	130	78	51	30	11.5	Yes	1,350	2,100	-4	176	Stainless Steel, Steel	4	10	00000000	000000

Flange-Mounted Linear Ball Bearings

The flanged housing makes these bearings a good solution for vertical linear motion applications. All are for use with round end-supported shafts and have a fixed-alignment design for use where shaft misalignment is unlikely. End seals keep lubricant in and dirt out.

Fixed Alignment

		Overall			Flange				Load Capacity, lb.				Mounting Holes
	For Shaft Dia.	Lg.	Wd.	Ht.	Thk.	OD	Bolt Circle Dia.	OD	Dynamic	Static	Temp. Range, ° F	For Shaft Material	No. of	Dia.		Each
Steel Bearings with Round Flange



		1/4"	3/4"	1 1/4"	1 1/4"	1/4"	1 1/4"	7/8"	1/2"	45	60	-4 to 176	Stainless Steel, Steel	4	5/32"	0000000	000000


		1/4"	1 3/8"	1 1/4"	1 1/4"	1/4"	1 1/4"	7/8"	1/2"	70	115	-4 to 176	Stainless Steel, Steel	4	5/32"	0000000	00000
		3/8"	7/8"	1 1/2"	1 1/2"	1/4"	1 1/2"	1 1/16"	5/8"	50	70	-4 to 176	Stainless Steel, Steel	4	3/16"	0000000	00000
		3/8"	1 5/8"	1 1/2"	1 1/2"	1/4"	1 1/2"	1 1/16"	5/8"	75	140	-4 to 176	Stainless Steel, Steel	4	3/16"	0000000	00000
		1/2"	1 1/4"	1 3/4"	1 3/4"	1/4"	1 3/4"	1 5/16"	7/8"	110	175	-4 to 176	Stainless Steel, Steel	4	3/16"	0000000	00000
		1/2"	2 3/8"	1 3/4"	1 3/4"	1/4"	1 3/4"	1 5/16"	7/8"	180	350	-4 to 176	Stainless Steel, Steel	4	3/16"	0000000	00000
		5/8"	1 1/2"	2"	2"	1/4"	2"	1 9/16"	1 1/8"	170	265	-4 to 176	Stainless Steel, Steel	4	3/16"	0000000	00000
		5/8"	2 13/16"	2"	2"	1/4"	2"	1 9/16"	1 1/8"	275	525	-4 to 176	Stainless Steel, Steel	4	3/16"	0000000	00000
		3/4"	1 5/8"	2 3/16"	2 3/16"	5/16"	2 3/16"	1 23/32"	1 1/4"	190	305	-4 to 176	Stainless Steel, Steel	4	7/32"	0000000	00000
		3/4"	3 1/8"	2 3/16"	2 3/16"	5/16"	2 3/16"	1 23/32"	1 1/4"	305	615	-4 to 176	Stainless Steel, Steel	4	7/32"	0000000	00000
		1"	2 1/4"	2 1/2"	2 1/2"	5/16"	2 1/2"	2 1/32"	1 9/16"	220	350	-4 to 176	Stainless Steel, Steel	4	7/32"	0000000	00000


		1"	4 5/16"	2 1/2"	2 1/2"	5/16"	2 1/2"	2 1/32"	1 9/16"	350	705	-4 to 176	Stainless Steel, Steel	4	7/32"	0000000	000000
		1 1/4"	2 5/8"	3 1/8"	3 1/8"	3/8"	3 1/8"	2 9/16"	2"	350	615	-4 to 176	Stainless Steel, Steel	4	9/32"	0000000	00000
		1 1/4"	5"	3 1/8"	3 1/8"	3/8"	3 1/8"	2 9/16"	2"	560	1,200	-4 to 176	Stainless Steel, Steel	4	9/32"	0000000	000000
		1 1/2"	3"	3 3/4"	3 3/4"	1/2"	3 3/4"	3 1/16"	2 3/8"	490	900	-4 to 176	Stainless Steel, Steel	4	11/32"	0000000	000000
		1 1/2"	5 11/16"	3 3/4"	3 3/4"	1/2"	3 3/4"	3 1/16"	2 3/8"	770	1,800	-4 to 176	Stainless Steel, Steel	4	11/32"	0000000	000000
		2"	4"	4 3/8"	4 3/8"	1/2"	4 3/8"	3 11/16"	3"	855	1,700	-4 to 176	Stainless Steel, Steel	4	11/32"	0000000	000000
		2"	7 3/4"	4 3/8"	4 3/8"	1/2"	4 3/8"	3 11/16"	3"	1,300	3,500	-4 to 176	Stainless Steel, Steel	4	11/32"	0000000	000000
		5 mm	22 mm	28 mm	28 mm	5 mm	28 mm	20 mm	12 mm	46	55	-4 to 176	Stainless Steel, Steel	4	3.5 mm	00000000	00000
		8 mm	25 mm	32 mm	32 mm	5 mm	32 mm	24 mm	16 mm	55	90	-4 to 176	Stainless Steel, Steel	4	3.5 mm	00000000	00000
		8 mm	46 mm	32 mm	32 mm	5 mm	32 mm	24 mm	16 mm	90	180	-4 to 176	Stainless Steel, Steel	4	3.5 mm	00000000	00000


		12 mm	32 mm	42 mm	42 mm	6 mm	42 mm	32 mm	22 mm	110	175	-4 to 176	Stainless Steel, Steel	4	4.5 mm	00000000	00000
		12 mm	61 mm	42 mm	42 mm	6 mm	42 mm	32 mm	22 mm	180	350	-4 to 176	Stainless Steel, Steel	4	4.5 mm	00000000	00000
		16 mm	36 mm	45 mm	45 mm	6 mm	45 mm	36 mm	26 mm	125	200	-4 to 176	Stainless Steel, Steel	4	4.5 mm	00000000	00000
		16 mm	68 mm	46 mm	46 mm	6 mm	46 mm	36 mm	26 mm	400	400	-4 to 176	Stainless Steel, Steel	4	4.5 mm	00000000	00000
		20 mm	45 mm	54 mm	54 mm	8 mm	54 mm	43 mm	32 mm	190	300	-4 to 176	Stainless Steel, Steel	4	5.5 mm	00000000	00000
		20 mm	80 mm	54 mm	54 mm	8 mm	54 mm	43 mm	32 mm	610	610	-4 to 176	Stainless Steel, Steel	4	5.5 mm	00000000	00000
		25 mm	58 mm	62 mm	62 mm	8 mm	62 mm	51 mm	40 mm	220	350	-4 to 176	Stainless Steel, Steel	4	5.5 mm	00000000	00000
		25 mm	112 mm	62 mm	62 mm	8 mm	62 mm	51 mm	40 mm	350	700	-4 to 176	Stainless Steel, Steel	4	5.5 mm	00000000	000000
		30 mm	68 mm	76 mm	76 mm	10 mm	76 mm	62 mm	47 mm	350	610	-4 to 176	Stainless Steel, Steel	4	6.6 mm	00000000	00000
		40 mm	80 mm	98 mm	98 mm	13 mm	98 mm	80 mm	62 mm	480	900	-4 to 176	Stainless Steel, Steel	4	9 mm	00000000	000000


		50 mm	192 mm	112 mm	112 mm	13 mm	112 mm	94 mm	75 mm	1,350	3,550	-4 to 176	Stainless Steel, Steel	4	9 mm	00000000	000000
		60 mm	209 mm	134 mm	134 mm	18 mm	134 mm	112 mm	90 mm	1,650	4,450	-4 to 176	Stainless Steel, Steel	4	11 mm	00000000	000000


		Steel Bearings with Square Flange



				1/4"	3/4"	1"	1"	1/4"	—	7/8"	1/2"	45	60	-4 to 176	Stainless Steel, Steel	4	5/32"	0000000	00000


				1/4"	1 3/8"	1"	1"	1/4"	—	7/8"	1/2"	70	115	-4 to 176	Stainless Steel, Steel	4	5/32"	0000000	00000
				3/8"	7/8"	1 1/4"	1 1/4"	1/4"	—	1 1/16"	5/8"	50	70	-4 to 176	Stainless Steel, Steel	4	3/16"	0000000	00000
				3/8"	1 5/8"	1 1/4"	1 1/4"	1/4"	—	1 1/16"	5/8"	75	140	-4 to 176	Stainless Steel, Steel	4	3/16"	0000000	00000
				1/2"	1 1/4"	1 3/8"	1 3/8"	1/4"	—	1 5/16"	7/8"	110	175	-4 to 176	Stainless Steel, Steel	4	3/16"	0000000	00000
				1/2"	2 3/8"	1 3/8"	1 3/8"	1/4"	—	1 5/16"	7/8"	180	350	-4 to 176	Stainless Steel, Steel	4	3/16"	0000000	00000
				5/8"	1 1/2"	1 1/2"	1 1/2"	1/4"	—	1 9/16"	1 1/8"	170	265	-4 to 176	Stainless Steel, Steel	4	3/16"	0000000	00000
				5/8"	2 13/16"	1 1/2"	1 1/2"	1/4"	—	1 9/16"	1 1/8"	275	525	-4 to 176	Stainless Steel, Steel	4	3/16"	0000000	00000
				3/4"	1 5/8"	1 11/16"	1 11/16"	5/16"	—	1 23/32"	1 1/4"	190	305	-4 to 176	Stainless Steel, Steel	4	7/32"	0000000	00000
				3/4"	3 1/8"	1 11/16"	1 11/16"	5/16"	—	1 23/32"	1 1/4"	305	615	-4 to 176	Stainless Steel, Steel	4	7/32"	0000000	000000
				1"	2 1/4"	2"	2"	5/16"	—	2 1/32"	1 9/16"	220	350	-4 to 176	Stainless Steel, Steel	4	7/32"	0000000	00000


1"	4 5/16"			2"	2"	5/16"	—	2 1/32"	1 9/16"	350	705	-4 to 176	Stainless Steel, Steel	4	7/32"	0000000	000000
1 1/4"	2 5/8"			2 1/2"	2 1/2"	3/8"	—	2 9/16"	2"	350	615	-4 to 176	Stainless Steel, Steel	4	9/32"	0000000	00000
1 1/4"	5"			2 1/2"	2 1/2"	3/8"	—	2 9/16"	2"	560	1,200	-4 to 176	Stainless Steel, Steel	4	9/32"	0000000	000000
1 1/2"	3"			3"	3"	1/2"	—	3 1/16"	2 3/8"	490	900	-4 to 176	Stainless Steel, Steel	4	11/32"	0000000	000000
1 1/2"	5 11/16"			3"	3"	1/2"	—	3 1/16"	2 3/8"	770	1,800	-4 to 176	Stainless Steel, Steel	4	11/32"	0000000	000000
2"	4"			3 1/2"	3 1/2"	1/2"	—	3 11/16"	3"	855	1,700	-4 to 176	Stainless Steel, Steel	4	11/32"	0000000	000000
2"	7 3/4"			3 1/2"	3 1/2"	1/2"	—	3 11/16"	3"	1,300	3,500	-4 to 176	Stainless Steel, Steel	4	11/32"	0000000	000000
5 mm	22 mm			22 mm	22 mm	5 mm	—	20 mm	12 mm	46	55	-4 to 176	Stainless Steel, Steel	4	3.5 mm	00000000	00000
8 mm	25 mm			25 mm	25 mm	5 mm	—	24 mm	16 mm	55	90	-4 to 176	Stainless Steel, Steel	4	3.5 mm	00000000	00000
8 mm	46 mm			25 mm	25 mm	5 mm	—	24 mm	16 mm	90	180	-4 to 176	Stainless Steel, Steel	4	3.5 mm	00000000	00000


12 mm	32 mm			32 mm	32 mm	6 mm	—	32 mm	22 mm	110	175	-4 to 176	Stainless Steel, Steel	4	4.5 mm	00000000	00000
12 mm	61 mm			32 mm	32 mm	6 mm	—	32 mm	22 mm	180	350	-4 to 176	Stainless Steel, Steel	4	4.5 mm	00000000	00000
16 mm	36 mm			35 mm	35 mm	6 mm	—	36 mm	26 mm	125	200	-4 to 176	Stainless Steel, Steel	4	4.5 mm	00000000	00000
16 mm	68 mm			35 mm	35 mm	6 mm	—	36 mm	26 mm	400	400	-4 to 176	Stainless Steel, Steel	4	4.5 mm	00000000	00000
20 mm	45 mm			42 mm	42 mm	8 mm	—	43 mm	32 mm	190	300	-4 to 176	Stainless Steel, Steel	4	5.5 mm	00000000	00000
20 mm	80 mm			42 mm	42 mm	8 mm	—	43 mm	32 mm	610	610	-4 to 176	Stainless Steel, Steel	4	5.5 mm	00000000	000000
25 mm	58 mm			50 mm	50 mm	8 mm	—	51 mm	40 mm	220	350	-4 to 176	Stainless Steel, Steel	4	5.5 mm	00000000	00000
25 mm	112 mm			50 mm	50 mm	8 mm	—	51 mm	40 mm	350	700	-4 to 176	Stainless Steel, Steel	4	5.5 mm	00000000	000000
30 mm	68 mm			60 mm	60 mm	10 mm	—	62 mm	47 mm	350	610	-4 to 176	Stainless Steel, Steel	4	6.6 mm	00000000	00000
40 mm	80 mm			75 mm	75 mm	13 mm	—	80 mm	62 mm	480	900	-4 to 176	Stainless Steel, Steel	4	9 mm	00000000	000000


50 mm	100 mm			88 mm	88 mm	13 mm	—	94 mm	75 mm	850	1,750	-4 to 176	Stainless Steel, Steel	4	9 mm	00000000	000000
60 mm	125 mm			106 mm	106 mm	18 mm	—	112 mm	90 mm	1,050	2,200	-4 to 176	Stainless Steel, Steel	4	11 mm	00000000	000000

Adjustable Mounted Linear Ball Bearings

Use the adjustment screw in the housing to tighten or loosen the snugness (also known as preload) of the bearing to your shaft. They are for use with round end-supported shafts and are self-aligning to compensate for shaft misalignment. End seals keep lubricant in and dirt out.

Self-Aligning with 0.5° Misalignment Capability

Image of Product. Front orientation. Contains Annotated. Linear Bearings. Adjustable Mounted Linear Ball Bearings .

		Overall, mm					Load Capacity		Temp.			Mounting Holes
	For Shaft Dia., mm	Lg.	Wd.	Ht.	Ctr. Ht., mm	With End Seals	Dynamic, lb.	Static	Min.	Max., ° F	For Shaft Material	No. of	Dia., mm		Each
Steel Bearings with Cast Iron Housing



		25	54	74	60	30	Yes	1,130	Not Rated	Not Rated	176	Stainless Steel, Steel	4	5.5	0000000	0000000

Self-Aligning with 1° Misalignment Capability

		Overall					Load Capacity				Mounting Holes
	For Shaft Dia.	Lg.	Wd.	Ht.	Ctr. Ht.	With End Seals	Dynamic, lb.	Static	Max. Temp., ° F	For Shaft Material	No. of	Dia.		Each
Acetal Bearings with 6063 Aluminum Housing



		1/2"	1 11/16"	2"	1 1/4"	11/16"	Yes	230	Not Rated	176	Stainless Steel, Steel	4	5/32"	0000000	0000000


		3/4"	2 1/16"	2 3/4"	1 3/4"	1 15/16"	Yes	470	Not Rated	176	Stainless Steel, Steel	4	3/16"	0000000	000000
		1"	2 13/16"	3 1/4"	2 3/16"	1 3/16"	Yes	850	Not Rated	176	Stainless Steel, Steel	4	7/32"	0000000	000000
		1 1/4"	3 5/8"	4"	2 13/16"	1 1/2"	Yes	1,230	Not Rated	176	Stainless Steel, Steel	4	7/32"	0000000	000000
		1 1/2"	4"	4 3/4"	3 1/4"	1 3/4"	Yes	1,480	Not Rated	176	Stainless Steel, Steel	4	9/32"	0000000	000000
		2"	5"	6"	4 1/16"	2 1/8"	Yes	2,430	Not Rated	176	Stainless Steel, Steel	4	13/32"	0000000	000000

Corrosion-Resistant Mounted Linear Ball Bearings for Support Rail Shafts

Image of Product. Front orientation. Contains Annotated. Linear Bearings. Corrosion-Resistant Mounted Linear Ball Bearings for Support Rail Shafts.

Outdoor as well as mild chemical environments are no problem for these bearings. They have stainless steel balls for corrosion resistance. Mount them on a support rail shaft for applications requiring maximum rigidity. They are self-aligning to compensate for shaft misalignment.

		Overall					Load Capacity, lb.				Mounting Holes
	For Shaft Dia.	Lg.	Wd.	Ht.	Ctr. Ht.	Wd.	Dynamic	Static	Temp. Range, ° F	For Shaft Material	No. of	Dia.		Each
Self-Aligning with 1° Misalignment Capability







				Acetal Bearings with Stainless Steel Balls in 6061 Aluminum Housing

				1/2"	1 1/2"	2"	1 3/32"	11/16"	1/4"	230	290	-4 to 176	Stainless Steel, Steel	4	5/32"	000000	0000000


				1/2"	3 1/2"	2"	1 3/32"	11/16"	1/4"	370	580	-4 to 176	Stainless Steel, Steel	4	5/32"	0000000	000000
				5/8"	1 3/4"	2 1/2"	1 13/32"	7/8"	5/16"	400	500	-4 to 176	Stainless Steel, Steel	4	3/16"	000000	000000
				3/4"	1 7/8"	2 3/4"	1 17/32"	15/16"	3/8"	470	590	-4 to 176	Stainless Steel, Steel	4	3/16"	0000000	000000
				1"	2 5/8"	3 1/4"	1 31/32"	1 3/16"	1/2"	850	1,000	-4 to 176	Stainless Steel, Steel	4	7/32"	0000000	000000
				1"	6"	3 1/4"	1 31/32"	1 3/16"	1/2"	1,350	2,100	-4 to 176	Stainless Steel, Steel	4	7/32"	0000000	000000
				1 1/4"	3 3/8"	4"	2 1/2"	1 1/2"	19/32"	1,200	1,500	-4 to 176	Stainless Steel, Steel	4	7/32"	0000000	000000
				1 1/4"	7 1/2"	4"	2 1/2"	1 1/2"	19/32"	1,950	3,050	-4 to 176	Stainless Steel, Steel	4	7/32"	0000000	000000
				1 1/2"	3 3/4"	4 3/4"	2 29/32"	1 3/4"	11/16"	1,450	1,850	-4 to 176	Stainless Steel, Steel	4	9/32"	0000000	000000