About External and Internal Grip Pullers
More
Expanding-Collar Internal Grip Pullers
Get a grip on objects with blind holes—these pullers have an expanding collet that secures bearings and bushings from inside.
Pullers with pin and pin adapter expand the collet inside the object you’re pulling. When the collet is secure, use a slide hammer (sold separately) to apply force to the object you’re removing.
Ready-to-use pullers have a nut that you tighten down to expand the collet jaws inside the object you’re pulling. When the collet is secure, use a bridge or a slide hammer (both sold separately) to apply force. A safety catch prevents the puller from overextending.
Pullers | Pins | Pin Adapter | ||||||
|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Puller Material | For Pin Dia. | Each | Each | Each | |||
| 5/16"-11/32" | Steel | 5/32" | 0000000 | 0000000 | 0000000 | 0000000 | 0000000 | 0000000 |
| 11/32"-7/16" | Steel | 3/16" | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 000000 |
| 7/16"-9/16" | Steel | 9/32" | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 000000 |
| 9/16"-7/8" | Steel | 13/32" | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 000000 |
| For Shaft Dia. | Thread Size | Puller Material | Each | |
| 1/4"-3/8" | M7 | Steel | 0000000 | 0000000 |
| 3/8"-1/2" | M7 | Steel | 0000000 | 000000 |
| 1/2"-5/8" | M7 | Steel | 0000000 | 000000 |
| 5/8"-3/4" | M7 | Steel | 0000000 | 000000 |
| 3/4"-7/8" | M10 | Steel | 0000000 | 000000 |
| 3/4"-1 3/16" | M10 | Steel | 0000000 | 000000 |
| 1 3/16"-1 5/8" | M10 | Steel | 0000000 | 000000 |
| 1 3/8"-1 7/8" | M15 | Steel | 0000000 | 000000 |
| 1 3/4"-2 1/4" | M15 | Steel | 0000000 | 000000 |
| 2 1/4"-4 3/8" | 1/2"-14 | Steel | 0000000 | 000000 |
| 3 7/8"-7 7/8" | 3/4"-14 | Steel | 0000000 | 000000 |
| For Thread Size | Reach | Width | Includes | Each | |
| M7; M10 | 4 3/4" | 2 3/16" | Forcing Screw with T-Handle | 00000000 | 0000000 |
| M10; M15 | 6 7/16" | 3 7/8" | Forcing Screw with T-Handle | 00000000 | 000000 |
| M15 | 11" | 7 1/16" | Forcing Screw with T-Handle | 00000000 | 000000 |
| 1/2"-14 | 8 1/16" | 7 3/4" | Forcing Screw with T-Handle | 00000000 | 000000 |
| 3/4"-14 | 10 3/16" | 11 3/4" | Forcing Screw with T-Handle | 00000000 | 000000 |
Expanding-Collar Internal Grip Puller Sets
Get a grip on objects with blind holes—these puller sets have a variety of expanding collets that secure bearings and bushings from inside.
Ready-to-use puller sets have a nut that you tighten down to expand the collet jaws inside the object you’re pulling. When the collet is secure, use a bridge to apply force. A slide hammer can provide extra force to extract hard-to-remove objects. A safety catch prevents the puller from overextending.
| For Shaft Dia. | Puller Material | Includes | Each | |
| 3/16"-2 3/4" | Steel | Eight Pullers with Nut Two Bridges with T-Handle Forcing Screw (1 of Each: 4 1/2" Reach and 2 3/16" Width; 6 1/2" Reach and 3 7/8" Width) Grease | 00000000 | 000000000 |
| 1/4"-1 3/16" | Steel | Four Pullers with Nut 1 lb. Slide Hammer (M12 Thread Size) Handle for Slide Hammer Bridge with T-Handle Forcing Screw (4 1/2" Reach; 2 3/16" Width) Grease | 00000000 | 000000 |
| 1 1/8"-2 3/4" | Steel | Four Pullers with Nut 2 lb. Slide Hammer (M12 Thread Size) Handle for Slide Hammer Bridge with T-Handle Forcing Screw (6 1/2" Reach; 3 7/8" Width) Grease | 00000000 | 000000 |
| 2 3/8"-6 1/8" | Steel | Grease Puller Bridge with T-Handle Forcing Screw (9 3/8" Reach; 9 7/8" Width) | 00000000 | 00000000 |
Internal Grip Pullers
Also known as a pilot bearing puller, use this puller to grip the interior edge of press-fit bearings, oil seals, and bushings. It has a slide hammer that provides force to extract hard-to-remove objects. Choose from the optional jaws (sold separately) to increase the for ID size and reach of your puller. Optional jaws are sold individually.
Jaw Tip | ||||||
|---|---|---|---|---|---|---|
| For ID | Reach | Puller Material | Wd. | Thick. | Each | |
| 1/2"-1 1/2" | 3/4" | Steel | 7/16" | 1/8" | 000000 | 0000000 |
Reversible Jaw External/Internal Grip Puller Sets with Locking Storage Box
Complete with a locking storage box, use the pullers in this set to tackle a wide variety of pulling jobs—use pullers to grip objects from the outside or the inside. To grip objects on the outside, attach puller jaws with tips facing in. To grip objects from inside, attach the puller jaws with tips facing out.
| Puller Material | Includes | Each | |
| Steel | Internal Extractor (for 1/2"-1-7/8" ID; 1-1/2" Reach) Six Cap Screws (3 of each: 3/8"-24 × 3" Lg.; 3/8"-16 × 3" Lg.) for Adjustable Face-Grip Puller Steel Locking Storage Box (25 3/4" Height; 29 1/2" Width; 10" Depth) 2/3 Reversible-Jaw External/Internal Grip Puller (For 1 1/4"-6 3/4" ID; For 1/4"-6" OD; 4-3/4" Reach) with Slide Hammer Adjustable Face-Grip Puller (For 3 1/4"-9 5/8" OD) with 6 3/4” Long Forcing Screw Adjustable Face-Grip Puller (For 3/4"-4 1/4" OD) with 4 1/4” Long Forcing Screw Combination 2/3-Jaw External Grip Puller—7 1/2-ton Capacity (For Up To 10 1/2" OD; 5" Reach) Combination 2/3-Jaw External Grip Puller—5 1/2-ton Capacity (For Up To 7" OD; 3 1/4" Reach) Two Sets of Long-Reach Jaws (Three Jaws for 5 1/2-ton Capacity Puller and Three Jaws for 7-ton Capacity Puller) Bearing Separator (1/4"-1 3/4 Spread) Bearing Separator (3/4"-4 1/4" Spread) | 00000000 | 000000000 |
Reversible Jaw External/Internal Grip Pullers
Grip objects on the outside or inside to tackle both types of pulling jobs. To grip objects on the outside, attach puller jaws with tips facing in. To grip objects from inside, attach the puller jaws with tips facing out.
Puller has combination 2/3 jaws—it comes with a jaw bar so you can change between 2-jaw and 3-jaw configurations to suit your application. Use the slide hammer to extract hard-to-remove objects.
Optional crossbar allows you to pull objects that have tapped holes. Thread the center hole onto the slide hammer; requires two 3/8" dia. cap screws (not included).
Replacement jaw bar converts the 3-jaw puller to a 2-jaw puller.
| For ID | For OD | Reach | Puller Material | T-Handle Material | Each | |
| 1 1/4"-4 1/4" | 1"-4 1/2" | 1 1/4", 3" | Steel | Steel | 000000 | 0000000 |
| Optional Internal Jaws (For 3/4"-2 1/2" ID; 2 3/8" Reach) | 0000000 | Each | 000000 |
| Optional External/Internal Jaws (For 1 1/4"-3 1/2" ID; For 1"-4 1/2" OD; 3 3/4" Reach) | 0000000 | Each | 00000 |
| Optional External/Internal Jaws (For 1 1/2"-4 1/2" ID; For 3/4"-5" OD; 4 1/8" Reach) | 0000000 | Each | 00000 |
| Optional External/Internal Jaws (For 2 3/4"-5 1/2" ID; For 3/4"-7 1/2" OD; 6 1/2" Reach) | 0000000 | Each | 00000 |
| Optional 5-lb. Slide Hammer (5/8"-18 Thread Size) | 000000 | Each | 00000 |
| Replacement Jaw Bar (5/8"-18 Thread Size) | 000000 | Each | 00000 |
| Optional Puller Hook (For 5/8" Minimum ID) | 000000 | Each | 00000 |
| Optional Crossbar (For 1 7/8"-5 5/8" ID; For 1 7/8"-5 5/8" OD; For 0.375" Dia. Cap Screw; Fasteners Included: No) | 000000 | Each | 00000 |
| Replacement 2 1/2-lb. Slide Hammer (5/8"-18 Thread Size) | 000000 | Each | 00000 |
| Replacement Adjusting Cone | 00000000 | Each | 00000 |
Reversible Jaw External/Internal Grip Puller Sets
Tackle a wide variety of pulling jobs—use pullers in these sets to grip objects from the outside or the inside. To grip objects on the outside, attach puller jaws with tips facing in. To grip objects from inside, attach the puller jaws with tips facing out.
Two-jaw pullers have a slimmer profile than pullers with more jaws, so they fit in tighter spaces. Combination 2/3-jaw pullers have mounting holes in both a two-jaw and three-jaw configuration, so you can attach the jaws either way. Three-jaw pullers are more stable and more evenly distribute pulling force than two-jaw pullers. Use them when space allows.
Pullers with a bar keep jaws straight at 90° as you slide them in and out. They won't kick out like the jaws do in caged pullers.
| Capacity, tons | Puller Material | Forcing Screw Material | Includes | Each | |
Two Jaws—Bar Control | |||||
|---|---|---|---|---|---|
| 5 | Steel | Steel | Crossbar Forcing Screw (7/8"-9" Thread Size; 8" Long) Four Sets of Jaws (5", 6", 6" Tapered Tip, and 8" Reach) Two Jaw-Mounting Screws | 000000 | 000000000 |
Two Jaws and Combination 2/3 Jaws | |||||
| Not Rated | Steel | __ | Slide Hammer Puller with Grip Handle Clamping Cone Puller Hook 2-Jaw Jaw Bar 4 Sets of 2/3 Reversible-Jaw External/Internal Jaws (For 1"-8" ID; For 1/4"-6 3/4" OD; 4 3/4"-6 1/2" Reach) | 0000000 | 000000 |
| 5-10 | Steel | __ | 2-Reversible-Jaw External/Internal Grip Puller —5-ton Capacity (For 5/8"-6" OD) 2/3-Jaw External Grip Puller—10-ton Capacity (For Up To 16" OD; 11" Reach) 2-Reversible-Jaw External/Internal Grip Puller —7-ton Capacity (For 1/2"-8-5/8" OD) Internal Extractor (for 1/2"-1-7/8" ID; 1-1/2" Reach) Six Cap Screws (3 of each: 3/8"-24 × 3" Lg.; 3/8"-16 × 3" Lg.) for Adjustable Face-Grip Puller Adjustable Face-Grip Puller (For 3 1/4"-9 5/8" OD) with 6 3/4” Long Forcing Screw 2/3 Reversible-Jaw External/Internal Grip Puller (For 1 1/4"-6 3/4" ID; For 1/4"-6" OD; 4-3/4" Reach) with Slide Hammer Adjustable Face-Grip Puller (For 3/4"-4 1/4" OD) with 4 1/4” Long Forcing Screw Bearing Separator (1/4"-1 3/4 Spread) Bearing Separator (3/4"-4 1/4" Spread) | 0000000 | 00000000 |
| Replacement Straight-Tip Jaws for 6337K1 (5 tons; 5" Reach) | 0000000 | Pair | 0000000 |
| Replacement Straight-Tip Jaws for 6337K1 (5 tons; 6" Reach) | 0000000 | Pair | 000000 |
| Replacement Straight-Tip Jaws for 6337K1 (5 tons; 8" Reach) | 0000000 | Pair | 000000 |
| Replacement Tapered-Tip Jaws for 6337K1 (5 tons; 6" Reach) | 0000000 | Pair | 000000 |
| Replacement Crossbars for 6337K1 (5 tons; Includes: Forcing Screw) | 0000000 | Each | 000000 |
| Optional Straight-Tip Jaws for 6337K1 (25 tons; 6" Reach) | 0000000 | Pair | 000000 |
| Optional Straight-Tip Jaws for 6337K1 (25 tons; 10" Reach) | 0000000 | Pair | 000000 |
| Replacement Adjusting Cone for 6317K34 | 00000000 | Each | 00000 |
Quick-Hold Reversible Jaw External/Internal Grip Puller Sets
To quickly grip objects from either the outside or inside, all the pullers in these sets have reversible jaws that stay aligned. The jaws slide along the bar, so the arms are always straight at 90° and won’t kick out like they do in caged pullers. They’re often used to pull bearings and pulleys. To grip objects on the outside, attach the jaws with tips facing in. To grip objects from inside, attach the jaws with tips facing out.
The pullers in these sets can either be used with two or three jaws. Use two jaws for tight spots where three jaws won’t fit. When space allows, pullers with three jaws are more stable and more evenly distribute pulling force compared to pullers with two jaws.
Narrow-profile jaws also have narrow tips for gripping objects in tight spaces.
Capacity is dependent on the material and thread size of the forcing screw. It should be used as a guide. If you can grip and reach an object, your puller will normally have enough power to pull it. When in doubt, choose the next larger puller size.
| Capacity, tons | Puller Material | Forcing Screw Material | Forcing Screw Thread Size | Includes | Each | |
Narrow Profile—Bar Control | ||||||
|---|---|---|---|---|---|---|
Combination 2/3 Jaws with Tips on One End | ||||||
| 5 1/2 | Steel | Steel | M14 × 1.5 mm | Quick-Hold 2-Jaw Reversible External/Internal Grip Puller Three Sets of Narrow-Profile Jaws (For 2 3/4"-7 1/8" ID; For 1 1/16"-5 1/8" OD; 3 15/16"-9 13/16" Reach) Set of Jaw Extensions (3 15/16" Long) Forcing Screws (1 of each: 6 5/16" Long; 9 13/16" Long) 2-to-3 Jaw Converter Grease Plastic Case | 0000000 | 0000000 |
Standard and Narrow Profile—Bar Control | ||||||
Combination 2/3 Jaws with Tips on One End | ||||||
| 7 1/2 | Steel | Steel | 1/2"-14 | Quick-Hold 2-Jaw Reversible External/Internal Grip Puller One Set of Narrow-Profile Jaws (For 3 7/8"-10 1/4" ID; For 1 3/8"-7 7/8" OD; 5 15/16"-11 13/16" Reach) One Set of Standard-Profile Jaws (For 3 7/8"-10 1/4" ID; For 1 3/8"-7 7/8" OD; 5 15/16"-11 13/16" Reach) Two Sets of Jaw Extensions (5 15/16" Long) Forcing Screws (1 of each: 8 5/16" Long; 14" Long) 2-to-3 Jaw Converter Grease Plastic Case | 0000000 | 00000000 |
Quick-Hold Reversible Jaw External/Internal Grip Pullers
With reversible jaws that stay aligned, these pullers can quickly grip objects from the outside or inside. They’re often used to pull bearings and pulleys. To grip objects on the outside, attach the jaws with tips facing in. To grip objects from inside, attach the jaws with tips facing out.
Narrow pullers have both narrow jaws and narrow jaw tips to grip objects in tight spaces.
Pullers with a bar keep jaws straight at 90° as you slide them in and out. They won't kick out like the jaws do in caged pullers.
Pullers with spring-loaded jaws lock in place for quick one-hand operation. Spring tension holds the jaws against the object being pulled, so you can tighten the locking nut.
Two-jaw pullers have a slimmer profile than pullers with more jaws, so they fit in tighter spaces. Three-jaw pullers are more stable and more evenly distribute pulling force than two-jaw pullers. Use them when space allows. Combination 2/3-jaw pullers have mounting holes in both a two-jaw and three-jaw configuration, so you can attach the jaws either way. Lift up the base to add or remove jaws.
Capacity is dependent on the material and thread size of the forcing screw. It should be used as a guide. If you can grip and reach an object, your puller will normally have enough power to pull it. When in doubt, choose the next larger puller size.
Pullers | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Jaw Tip | Forcing Screw | Replacement Forcing Screws | |||||||||||
| For ID | For OD | Reach | Capacity, tons | Puller Material | Forcing Screw Material | Wd. | Thick. | Overall Lg. | Thread Size | Each | Each | ||
Standard Profile—Bar Control | |||||||||||||
Two Jaws with Tips on One End | |||||||||||||
| 3 3/4"-6 1/4" | 1/2"-5" | 3 7/8" | 5 | Steel | Steel | 13/16" | 1/8" | 7 1/4" | M14 × 1.5 mm | 0000000 | 0000000 | 000000 | 00 |
| 4"-4 3/4" | 1/4"-3 1/2" | 3 7/8" | 5 | Steel | Steel | 13/16" | 1/8" | 7 1/4" | M14 × 1.5 mm | 0000000 | 000000 | 000000 | 00 |
| 4"-8 3/4" | 1/2"-6 1/4" | 5 7/8" | 10 | Steel | Steel | 15/16" | 3/16" | 10" | 1/2"-14 | 0000000 | 000000 | 000000 | 00 |
| 4"-10 1/4" | 1/2"-7 3/4" | 5 7/8" | 10 | Steel | Steel | 15/16" | 3/16" | 10" | 1/2"-14 | 0000000 | 000000 | 000000 | 00 |
| 7"-13 1/2" | 0"-9 3/4" | 7 7/8" | 12 | Steel | Steel | 1 3/8" | 5/32" | 13 1/4" | 3/4"-14 | 0000000 | 000000 | 000000 | 00 |
| 7"-17 1/4" | 0"-13 3/4" | 7 7/8" | 12 | Steel | Steel | 1 3/8" | 5/32" | 13 1/4" | 3/4"-14 | 0000000 | 000000 | 000000 | 00 |
| 7 3/4"-23 1/4" | 1/2"-20 1/2" | 11 7/8" | 15 | Steel | Steel | 1 3/8" | 5/32" | 17 3/4" | 1"-11 | 0000000 | 00000000 | 000000 | 00 |
Three Jaws with Tips on One End | |||||||||||||
| 2 3/4"-5 1/2" | 0"-3 1/2" | 3 7/8" | 6 1/2 | Steel | Steel | 13/16" | 1/8" | 6 1/4" | M14 × 1.5 mm | 0000000 | 000000 | 000000 | 00 |
| 2 3/4"-7" | 0"-5" | 3 7/8" | 6 1/2 | Steel | Steel | 13/16" | 1/8" | 6 1/4" | M14 × 1.5 mm | 0000000 | 000000 | 000000 | 00 |
| 4"-8 3/4" | 0"-6 1/4" | 5 7/8" | 11 1/2 | Steel | Steel | 15/16" | 3/16" | 10" | 1/2"-14 | 0000000 | 000000 | 000000 | 00 |
| 4"-10 1/4" | 0"-7 3/4" | 5 7/8" | 11 1/2 | Steel | Steel | 15/16" | 3/16" | 10" | 1/2"-14 | 0000000 | 000000 | 000000 | 00 |
| 7"-13 1/2" | 0"-9 3/4" | 7 7/8" | 13 1/2 | Steel | Steel | 1 3/8" | 5/32" | 13 1/4" | 3/4"-14 | 0000000 | 000000 | 000000 | 00 |
| 7"-17 1/4" | 4 1/4"-14 3/4" | 7 7/8" | 13 1/2 | Steel | Steel | 1 3/8" | 5/32" | 17 3/4" | 1"-11 | 0000000 | 000000 | 000000 | 00 |
| 8 3/4"-19 3/4" | 4 1/4"-14 3/4" | 11 7/8" | 16 1/2 | Steel | Steel | 1 3/8" | 5/32" | 17 3/4" | 1"-11 | 0000000 | 00000000 | 000000 | 00 |
| 8 3/4"-19 3/4" | 4 1/4"-14 3/4" | 19 3/4" | 16 1/2 | Steel | Steel | 1 3/8" | 5/32" | 17 3/4" | 1"-11 | 0000000 | 00000000 | 000000 | 00 |
| 11"-23 1/2" | 5"-20 1/2" | 19 3/4" | 22 | Steel | Steel | 1 3/8" | 5/32" | 16 3/8" | 1 1/8"-11 | 0000000 | 00000000 | 000000 | 00 |
| 11 1/2"-29 1/4" | 6"-25 1/2" | 19 3/4" | 22 | Steel | Steel | 1 3/8" | 5/32" | 16 3/8" | 1 1/8"-11 | 0000000 | 00000000 | 000000 | 00 |
Standard Profile—Spring-Loaded Control | |||||||||||||
Combination 2/3 Jaws with Tips on One End | |||||||||||||
| 3"-4" | 3"-4" | 4" | 2 | Steel | Steel | 9/16" | 3/16" | 8 3/4" | M15 × 2 mm | 0000000 | 000000 | 0000000 | 000000 |
| 3"-7" | 3"-7" | 7" | 5 | Steel | Steel | 7/8" | 1/4" | 11 3/4" | M18 × 2.5 mm | 0000000 | 000000 | 0000000 | 00000 |
Narrow Profile—Bar Control | |||||||||||||
Two Jaws with Tips on One End | |||||||||||||
| 2 3/4"-5 1/2" | 1/4"-3 1/2" | 3 7/8" | 4 1/2 | Steel | Steel | 1 3/16" | 1/8" | 7 1/4" | M14 × 1.5 mm | 0000000 | 000000 | 000000 | 00 |
| 2 3/4"-7" | 1/4"-4 3/4" | 3 7/8" | 4 1/2 | Steel | Steel | 1 3/16" | 1/8" | 7 1/4" | M14 × 1.5 mm | 0000000 | 000000 | 000000 | 00 |
| 4"-8 3/4" | 3/4"-6 1/4" | 5 7/8" | 9 1/2 | Steel | Steel | 1 1/4" | 5/32" | 10" | 1/2"-14 | 0000000 | 000000 | 000000 | 00 |
| 4"-10 1/4" | 3/4"-7 3/4" | 5 7/8" | 9 1/2 | Steel | Steel | 1 1/4" | 5/32" | 10" | 1/2"-14 | 0000000 | 000000 | 000000 | 00 |
| 7"-13 1/2" | 3/4"-9 3/4" | 7 7/8" | 11 1/2 | Steel | Steel | 1 3/8" | 1/4" | 13 1/4" | 3/4"-14 | 0000000 | 000000 | 000000 | 00 |
| 7"-17 1/4" | 3/4"-13 3/4" | 7 7/8" | 11 1/2 | Steel | Steel | 1 3/8" | 1/4" | 13 1/4" | 3/4"-14 | 0000000 | 000000 | 000000 | 00 |
Three Jaws with Tips on One End | |||||||||||||
| 2 3/4"-5 1/2" | 1/4"-3 1/2" | 3 7/8" | 6 | Steel | Steel | 1 3/16" | 1/8" | 6 1/4" | M14 × 1.5 mm | 0000000 | 000000 | 000000 | 00 |
| 2 3/4"-7" | 1/4"-5" | 3 7/8" | 6 | Steel | Steel | 1 3/16" | 1/8" | 6 1/4" | M14 × 1.5 mm | 0000000 | 000000 | 000000 | 00 |
| 4"-8 3/4" | 3/4"-6 1/4" | 5 7/8" | 11 | Steel | Steel | 1 3/16" | 1/8" | 10" | 1/2"-14 | 0000000 | 000000 | 000000 | 00 |
| 4"-10 1/4" | 3/4"-7 3/4" | 5 7/8" | 11 | Steel | Steel | 1 3/16" | 1/8" | 10" | 1/2"-14 | 0000000 | 000000 | 000000 | 00 |
| 7"-13 1/2" | 0"-9 3/4" | 7 7/8" | 13 | Steel | Steel | 1 3/8" | 1/4" | 13 1/4" | 3/4"-14 | 0000000 | 000000 | 000000 | 00 |
High-Force External Grip Puller Sets
Move the immovable—these puller sets include a hand pump and hydraulic cylinder, so you can create a large amount of pulling force. However, these pullers produce more direct, constant thrust than pullers with a forcing screw. They have mounting holes in both a 2- and 3-jaw configuration for attaching the jaws either way. The jaws have no control mechanism, so they swing free.
| Capacity, tons | Puller Material | Includes | Each | |
| 17 1/2 | Steel | 3-Jaw External-Grip Hydraulic Puller (For Up To 20" OD; 11 1/2" Reach) Face-Grip Hydraulic Puller with End Caps (For 5 3/4"-11 3/4" OD; 18 1/2" Reach) 3-to-2 Jaw Head Converter for 3-Jaw External-Grip Hydraulic Puller Adjusting Screw Bearing Separator (1/2"-9" Spread) Crank Handle Hose Half Coupler with Dust Cap Hydraulic Cylinder (2" Stroke) Hydraulic Hose - 6 Feet Internal-Grip Jaw Attachment (For 1 1/2"-9" OD; 4" Reach) for 3-Jaw External-Grip Hydraulic Puller Pair of Legs (22 1/2" Reach) for Face-Grip Puller Pressure Gauge Single Stage Hydraulic Hand Pump Assembly Tee Adapter Three Threaded Adapters Two Pushing Adapters Wood Case | 0000000 | 000000000 |