System of Measurement System of Measurement | Show |
|---|
|
Head Type Head Type |
|---|
 | Flat |
Pin Type Pin Type |
|---|
 | Captive |
End Shape End Shape |
|---|
 | Chamfered |
PEM® Part Number PEM® Part Number |
|---|
Shaft Type Shaft Type |
|---|
 | Plain |
End Type End Type |
|---|
 | Plain |
Passivation Passivation |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
Captive Pins
Also known as pilot pins, use these pins to position, pivot, and align components. To install, punch or drill a hole in sheet metal, then use a punch and anvil or arbor press to clinch the head to the metal.
Pins are passivated for added protection against corrosion and oxidation. The ends are chamfered for easy insertion.
PEM® TPS pins work on steel or aluminum sheets. Made of 18-8 stainless steel, they offer a balance of strength and corrosion resistance and may be mildly magnetic.
PEM® TP4 pins work on stainless steel sheets. Made of 400 series stainless steel, they resist wear and abrasion, but are not as corrosion resistant as 18-8 stainless steel pins. Pins may be mildly magnetic.
PEM® MPP pins work with most materials. Made of A286 stainless steel, they're our strongest captive pins, with corrosion resistance comparable to 18-8 stainless steel pins. They are nonmagnetic.
For technical drawings and 3-D models, click on a part number.
| Lg. | Dia. Tolerance | PEM® Part No. | For Min. Panel Thick. | Pkg. Qty. | Pkg. | |
Metric 18-8 Stainless Steel | ||||||
|---|---|---|---|---|---|---|
3mm Dia. | ||||||
| 8mm | -0.05mm to 0.05mm | TPS-3MM-8 | 1mm | 25 | 000000000 | 00000 |
| 10mm | -0.05mm to 0.05mm | TPS-3MM-10 | 1mm | 25 | 000000000 | 0000 |
| 12mm | -0.05mm to 0.05mm | TPS-3MM-12 | 1mm | 25 | 000000000 | 0000 |
| 16mm | -0.05mm to 0.05mm | TPS-3MM-16 | 1mm | 25 | 000000000 | 0000 |
4mm Dia. | ||||||
| 8mm | -0.05mm to 0.05mm | TPS-4MM-8 | 1mm | 25 | 000000000 | 0000 |
| 10mm | -0.05mm to 0.05mm | TPS-4MM-10 | 1mm | 25 | 000000000 | 0000 |
| 12mm | -0.05mm to 0.05mm | TPS-4MM-12 | 1mm | 25 | 000000000 | 0000 |
| 16mm | -0.05mm to 0.05mm | TPS-4MM-16 | 1mm | 25 | 000000000 | 0000 |
5mm Dia. | ||||||
| 10mm | -0.05mm to 0.05mm | TPS-5MM-10 | 1mm | 25 | 000000000 | 0000 |
| 12mm | -0.05mm to 0.05mm | TPS-5MM-12 | 1mm | 25 | 000000000 | 0000 |
| 16mm | -0.05mm to 0.05mm | TPS-5MM-16 | 1mm | 25 | 000000000 | 00000 |
| 20mm | -0.05mm to 0.05mm | TPS-5MM-20 | 1mm | 25 | 000000000 | 00000 |
6mm Dia. | ||||||
| 12mm | -0.05mm to 0.05mm | TPS-6MM-12 | 1mm | 25 | 000000000 | 00000 |
| 16mm | -0.05mm to 0.05mm | TPS-6MM-16 | 1mm | 25 | 000000000 | 00000 |
| 20mm | -0.05mm to 0.05mm | TPS-6MM-20 | 1mm | 25 | 000000000 | 00000 |
Metric 400 Series Stainless Steel | ||||||
3mm Dia. | ||||||
| 8mm | -0.05mm to 0.05mm | TP4-3MM-8 | 1mm | 25 | 000000000 | 0000 |
| 10mm | -0.05mm to 0.05mm | TP4-3MM-10 | 1mm | 25 | 000000000 | 0000 |
| 12mm | -0.05mm to 0.05mm | TP4-3MM-12 | 1mm | 25 | 000000000 | 00000 |
| 16mm | -0.05mm to 0.05mm | TP4-3MM-16 | 1mm | 25 | 000000000 | 00000 |
4mm Dia. | ||||||
| 8mm | -0.05mm to 0.05mm | TP4-4MM-8 | 1mm | 25 | 000000000 | 0000 |
| 10mm | -0.05mm to 0.05mm | TP4-4MM-10 | 1mm | 25 | 000000000 | 00000 |
| 12mm | -0.05mm to 0.05mm | TP4-4MM-12 | 1mm | 25 | 000000000 | 00000 |
| 16mm | -0.05mm to 0.05mm | TP4-4MM-16 | 1mm | 25 | 000000000 | 00000 |
5mm Dia. | ||||||
| 10mm | -0.05mm to 0.05mm | TP4-5MM-10 | 1mm | 25 | 000000000 | 00000 |
| 12mm | -0.05mm to 0.05mm | TP4-5MM-12 | 1mm | 25 | 000000000 | 00000 |
| 16mm | -0.05mm to 0.05mm | TP4-5MM-16 | 1mm | 25 | 000000000 | 00000 |
| 20mm | -0.05mm to 0.05mm | TP4-5MM-20 | 1mm | 25 | 000000000 | 00000 |
6mm Dia. | ||||||
| 12mm | -0.05mm to 0.05mm | TP4-6MM-12 | 1mm | 25 | 000000000 | 00000 |
| 16mm | -0.05mm to 0.05mm | TP4-6MM-16 | 1mm | 25 | 000000000 | 00000 |
| 20mm | -0.05mm to 0.05mm | TP4-6MM-20 | 1mm | 25 | 000000000 | 00000 |
Metric A286 Stainless Steel | ||||||
1mm Dia. | ||||||
| 2mm | -0.038mm to 0.038mm | MPP-1MM-2 | 0.5mm | 25 | 000000000 | 00000 |
| 3mm | -0.038mm to 0.038mm | MPP-1MM-3 | 0.5mm | 25 | 000000000 | 00000 |
| 4mm | -0.038mm to 0.038mm | MPP-1MM-4 | 0.5mm | 25 | 000000000 | 00000 |
| 5mm | -0.038mm to 0.038mm | MPP-1MM-5 | 0.5mm | 25 | 000000000 | 00000 |
1.5mm Dia. | ||||||
| 3mm | -0.038mm to 0.038mm | MPP-1.5MM-3 | 0.5mm | 25 | 000000000 | 00000 |
| 4mm | -0.038mm to 0.038mm | MPP-1.5MM-4 | 0.5mm | 25 | 000000000 | 00000 |
| 5mm | -0.038mm to 0.038mm | MPP-1.5MM-5 | 0.5mm | 25 | 000000000 | 00000 |
| 6mm | -0.038mm to 0.038mm | MPP-1.5MM-6 | 0.5mm | 25 | 000000000 | 00000 |
| 8mm | -0.038mm to 0.038mm | MPP-1.5MM-8 | 0.5mm | 25 | 000000000 | 00000 |
2mm Dia. | ||||||
| 4mm | -0.038mm to 0.038mm | MPP-2MM-4 | 0.5mm | 25 | 000000000 | 00000 |
| 5mm | -0.038mm to 0.038mm | MPP-2MM-5 | 0.5mm | 25 | 000000000 | 00000 |
| 6mm | -0.038mm to 0.038mm | MPP-2MM-6 | 0.5mm | 25 | 000000000 | 00000 |
| 8mm | -0.038mm to 0.038mm | MPP-2MM-8 | 0.5mm | 25 | 000000000 | 00000 |
| 10mm | -0.038mm to 0.038mm | MPP-2MM-10 | 0.5mm | 25 | 000000000 | 00000 |