Use these metal dowel pins as pivots, hinges, shafts, jigs, and fixtures to locate or hold parts.

Slip these pins in and out during maintenance or prototyping—they’re undersized to make alignment easier.

Cut this 12" stock to the length you need.

These pins make good hinges or pivots. The grooved half locks pins in position, while the smooth half can act as a pivot. Also known as type H pins.

These pins are commonly used as anchors for tension springs. The grooved half locks pins in position, and spring ends fit in to the notch. Also known as type G pins.

Use these as pivot or hinge pins. The knurled half locks pins in position, while the smooth half acts as a pivot.

Center-knurled pins are often used in place of clevis pins or to create T-handles. The knurled center locks pins in position, while the smooth ends act as a pivot.

Use these pins to fasten components made of soft materials such as plastic or aluminum. Opposing barbs bite into each piece, pulling them together for a tight, secure fit.

These pins combine the locking capabilities of a clevis pin with the precision diameter of a dowel pin for a tight fit.

Push parts out of molds with these hardened pins. Also known as knockout and forged pins.

Also known as split pins, these have one prong slightly longer than the other so they’re easy to open. Bend prongs outward to secure.

Also known as roll, tension, split, and expansion pins, these pins have a slot along one side that you squeeze closed to install them into unthreaded holes.

For tough jobs, these spiral pins are 30% stronger than our standard coiled spring pins. They remain flexible after installation to absorb shock and vibration, and work well in holes that are out of round.