Oversized to fit worn and enlarged holes, these pins work well as repair and replacement parts.

The flat side of these pins relieves trapped air, making them easier to insert in and remove from blind holes. To remove, thread a screw or tool into the tapped hole, then pull the pin out.

For use with Browning shear hubs, these pins are designed to fail at specific loads to protect heavy duty machinery from torque overload.

These pins combine the locking capabilities of a clevis pin with the precision diameter of a dowel pin for a tight fit.

A large loop handle makes these pins easy to grip.

These pins have multiple through holes; change the length by moving the cotter pin. The bend makes them easy to insert and pull out.

Easier to install and remove than standard clevis pins, these pins have a ring-grip handle.

Slide a retaining ring into the groove for a secure hold that takes up less space than a cotter pin.

The wire retainer snaps closed to secure the pin for a one-piece alternative to a clevis and cotter pin combination. Also known as PTO pins.

Often used to connect equipment to a drawbar in towing applications, these rugged pins have a welded solid steel retainer.

These pins have a low-profile head, so they won't get knocked out of place. A spring-loaded, nonlocking retaining ball pops out when the pin is pushed through a hole, and retracts when the pin is pulled out.

The smooth ring handle on these pins won't catch on parts. The shoulder keeps a portion of the pin outside the hole and makes them easy to grab.

Two spring-loaded balls give these pins more holding power than quick-release pins with only one retaining ball. The balls pop out when the pin is pushed into a hole, and retract when the pin is pulled out.

The extra height and smaller width of the grip make the button more accessible in tight spaces. For a more secure hold than standard quick-release pins, these pins lock in place until you push the button to release the spring-loaded retaining balls.

The extra height and smaller width of the grip make the button more accessible in tight spaces. Made entirely of stainless steel, they stand up to corrosive enviroments. Pins lock in place until you push the button to release the spring-loaded retaining balls.

A T-handle makes these pins easy to grip. Made entirely of stainless steel, they stand up to corrosive enviroments. Pins lock in place until you push the button to release the spring-loaded retaining balls.

Use these pins with a die to punch 1/8" and larger holes. Pins can be modified to fit your application.

For tough jobs, these spiral pins are 30% stronger than our standard coiled spring pins. They remain flexible after installation to absorb shock and vibration, and work well in holes that are out of round.

Create a custom headed pin with your choice of material, dimensions, and end type.

Also known as double expansion anchors, these expand from both sides for full contact and a secure hold.

These stud anchors strengthen the parts of buildings where steel framing connects to concrete. They’re also known as Nelson studs.

Mount through the counterbored hole with a socket head cap screw to support and position workpieces and fixtures from the bottom or side.

Use these components in coordinate measuring machine (CMM) applications to raise a workpiece and reliably position it on a fixture plate with ¼"-20 holes.

These brass tools reduce marring on metal surfaces because they're softer than steel punches.