Stainless Steel Roll Pins

Filter by

System of Measurement

Diameter

Length

Material

400 Series Stainless Steel

Shaft Type

Hole Diameter

Performance

Passivation

Pin Type

End Shape

Specifications Met

Double Shear Breaking Strength

End Type

Fastener Head Type

DFARS Specialty Metals

Minimum Hardness

Wall Thickness

RoHS

REACH

Hardness

Export Control Classification Number (ECCN)

EAR99

Military Specification

Certification

Number of Pieces

Duty Rating

Container Type

810 Products

Shaft Type

Slotted

Squeeze and insert into tight holes to hold parts in place with tension

566 products

Coiled

The best for parts exposed to vibration and shock

244 products

Shaft Type

Tooth Slotted

Interlocking teeth resist pulling forces to keep pins from wiggling out of holes

0 products

Performance

Corrosion Resistant

Resist rust in wet and outdoor environments

810 products

Slotted Spring Pins

End View

Squeeze these pins into holes and they expand slightly, creating tension to hold parts in place. They are often used as hinge pins and as fasteners for springs and power transmission components. An alternative to dowel pins, they're lighter in weight with a hollow center and don’t need a precise hole. Also known as roll pins.

Corrosion-Resistant 18-8 Stainless Steel—The choice for wet and outdoor environments, these pins resist rusting. They are strong enough to join most components but won't withstand extreme stress and vibration as well as steel.

Highly-Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these pins won't degrade when exposed to harsh weather, salt water, and most chemicals. They're strong enough to join most components but won't withstand extreme stress and vibration as well as steel.

Wear-Resistant 400 Series Stainless Steel—Our most wear-resistant stainless steel pins, these are good for pivoting parts that create a lot of friction. They hold up in environments that experience occasional moisture, but they're not as corrosion resistant as 18-8 and 316 stainless steel.

	Lg.	For Hole Dia.	Wall Thk.	Double Shear Breaking Strength, lbf	Min. Hardness	Specs. Met	Mil. Spec.	Pkg. Qty.		Pkg.
Corrosion-Resistant 18-8 Stainless Steel







				1/16" Diameter

				3/16"	0.062" to 0.065"	0.012"	250	Not Rated	ASME B18.8.2	—	100	000000000	00000


				1/4"	0.062" to 0.065"	0.012"	250	Not Rated	ASME B18.8.2	—	100	000000000	0000
				5/16"	0.062" to 0.065"	0.012"	250	Not Rated	ASME B18.8.2	—	100	000000000	0000
				3/8"	0.062" to 0.065"	0.012"	250	Not Rated	ASME B18.8.2	—	100	000000000	0000
				7/16"	0.062" to 0.065"	0.012"	250	Not Rated	ASME B18.8.2	—	100	000000000	00000
				1/2"	0.062" to 0.065"	0.012"	250	Not Rated	ASME B18.8.2	—	100	000000000	00000
				9/16"	0.062" to 0.065"	0.012"	250	Not Rated	ASME B18.8.2	—	100	000000000	0000
				5/8"	0.062" to 0.065"	0.012"	250	Not Rated	ASME B18.8.2	—	100	000000000	00000
				11/16"	0.062" to 0.065"	0.012"	250	Not Rated	ASME B18.8.2	—	100	000000000	00000
				3/4"	0.062" to 0.065"	0.012"	250	Not Rated	ASME B18.8.2	—	100	000000000	00000
				13/16"	0.062" to 0.065"	0.012"	250	Not Rated	ASME B18.8.2	—	100	000000000	00000


				7/8"	0.062" to 0.065"	0.012"	250	Not Rated	ASME B18.8.2	—	100	000000000	00000
				15/16"	0.062" to 0.065"	0.012"	250	Not Rated	ASME B18.8.2	—	100	000000000	00000
				1"	0.062" to 0.065"	0.012"	250	Not Rated	ASME B18.8.2	—	100	000000000	00000




						5/64" Diameter

						3/16"	0.078" to 0.081"	0.018"	450	Not Rated	ASME B18.8.2	—	100	000000000	0000


						1/4"	0.078" to 0.081"	0.018"	450	Not Rated	ASME B18.8.2	—	100	000000000	0000
						5/16"	0.078" to 0.081"	0.018"	450	Not Rated	ASME B18.8.2	—	100	000000000	0000
						3/8"	0.078" to 0.081"	0.018"	450	Not Rated	ASME B18.8.2	—	100	000000000	0000
						7/16"	0.078" to 0.081"	0.018"	450	Not Rated	ASME B18.8.2	—	100	000000000	0000
						1/2"	0.078" to 0.081"	0.018"	450	Not Rated	ASME B18.8.2	—	100	000000000	0000
						9/16"	0.078" to 0.081"	0.018"	450	Not Rated	ASME B18.8.2	—	100	000000000	00000
						11/16"	0.078" to 0.081"	0.018"	450	Not Rated	ASME B18.8.2	—	100	000000000	00000
						3/4"	0.078" to 0.081"	0.018"	450	Not Rated	ASME B18.8.2	—	100	000000000	00000
						13/16"	0.078" to 0.081"	0.018"	450	Not Rated	ASME B18.8.2	—	100	000000000	00000
						7/8"	0.078" to 0.081"	0.018"	450	Not Rated	ASME B18.8.2	—	100	000000000	00000


						1 1/4"	0.078" to 0.081"	0.018"	450	Not Rated	ASME B18.8.2	—	100	000000000	00000
						1 1/2"	0.078" to 0.081"	0.018"	450	Not Rated	ASME B18.8.2	—	100	000000000	00000




								3/32" Diameter

								3/16"	0.094" to 0.097"	0.022"	650	Not Rated	ASME B18.8.2	—	100	000000000	0000


								1/4"	0.094" to 0.097"	0.022"	650	Not Rated	ASME B18.8.2	—	100	000000000	0000
								5/16"	0.094" to 0.097"	0.022"	650	Not Rated	ASME B18.8.2	—	100	000000000	0000
								3/8"	0.094" to 0.097"	0.022"	650	Not Rated	ASME B18.8.2	—	100	000000000	0000
								7/16"	0.094" to 0.097"	0.022"	650	Not Rated	ASME B18.8.2	—	100	000000000	0000
								1/2"	0.094" to 0.097"	0.022"	650	Not Rated	ASME B18.8.2	—	100	000000000	0000
9/16"								0.094" to 0.097"	0.022"	650	Not Rated	ASME B18.8.2	—	100	000000000	0000
5/8"	0.094" to 0.097"							0.022"	650	Not Rated	ASME B18.8.2	—	100	000000000	0000
11/16"	0.094" to 0.097"							0.022"	650	Not Rated	ASME B18.8.2	—	100	000000000	0000
3/4"	0.094" to 0.097"							0.022"	650	Not Rated	ASME B18.8.2	—	100	000000000	0000
13/16"	0.094" to 0.097"							0.022"	650	Not Rated	ASME B18.8.2	—	100	000000000	0000


7/8"	0.094" to 0.097"	0.022"	650					Not Rated	ASME B18.8.2	—	100	000000000	0000
15/16"	0.094" to 0.097"	0.022"	650					Not Rated	ASME B18.8.2	—	100	000000000	00000
1"	0.094" to 0.097"	0.022"	650					Not Rated	ASME B18.8.2	—	100	000000000	0000
1 1/8"	0.094" to 0.097"	0.022"	650					Not Rated	ASME B18.8.2	—	100	000000000	00000
1 1/4"	0.094" to 0.097"	0.022"	650					Not Rated	ASME B18.8.2	—	50	000000000	0000
1 3/8"	0.094" to 0.097"	0.022"	650					Not Rated	ASME B18.8.2	—	100	000000000	00000
1 1/2"	0.094" to 0.097"	0.022"	650					Not Rated	ASME B18.8.2	—	100	000000000	00000




		1/8" Diameter

		1/4"	0.125" to 0.129"					0.028"	1,000	Not Rated	ASME B18.8.2	—	100	000000000	0000


		5/16"	0.125" to 0.129"					0.028"	1,000	Not Rated	ASME B18.8.2	—	100	000000000	0000
		3/8"	0.125" to 0.129"					0.028"	1,000	Not Rated	ASME B18.8.2	—	100	000000000	0000
		7/16"	0.125" to 0.129"					0.028"	1,000	Not Rated	ASME B18.8.2	—	100	000000000	0000
		1/2"	0.125" to 0.129"					0.028"	1,000	Not Rated	ASME B18.8.2	—	100	000000000	0000
		9/16"	0.125" to 0.129"					0.028"	1,000	Not Rated	ASME B18.8.2	—	100	000000000	0000
		5/8"	0.125" to 0.129"					0.028"	1,000	Not Rated	ASME B18.8.2	—	100	000000000	0000
		11/16"	0.125" to 0.129"					0.028"	1,000	Not Rated	ASME B18.8.2	—	100	000000000	0000
		3/4"	0.125" to 0.129"	0.028"				1,000	Not Rated	ASME B18.8.2	—	100	000000000	00000
		13/16"	0.125" to 0.129"	0.028"	1,000			Not Rated	ASME B18.8.2	—	100	000000000	00000
		7/8"	0.125" to 0.129"	0.028"	1,000			Not Rated	ASME B18.8.2	—	100	000000000	00000


		15/16"	0.125" to 0.129"	0.028"	1,000			Not Rated	ASME B18.8.2	—	100	000000000	00000
		1"	0.125" to 0.129"	0.028"	1,000			Not Rated	ASME B18.8.2	—	100	000000000	00000
		1 1/8"	0.125" to 0.129"	0.028"	1,000			Not Rated	ASME B18.8.2	—	100	000000000	00000
		1 1/4"	0.125" to 0.129"	0.028"	1,000			Not Rated	ASME B18.8.2	—	100	000000000	00000
		1 3/8"	0.125" to 0.129"	0.028"	1,000			Not Rated	ASME B18.8.2	—	100	000000000	00000
		1 1/2"	0.125" to 0.129"	0.028"	1,000			Not Rated	ASME B18.8.2	—	100	000000000	00000
		1 5/8"	0.125" to 0.129"	0.028"	1,000			Not Rated	ASME B18.8.2	—	50	000000000	00000
		1 3/4"	0.125" to 0.129"	0.028"	1,000			Not Rated	ASME B18.8.2	—	50	000000000	00000
		1 7/8"	0.125" to 0.129"	0.028"	1,000			Not Rated	ASME B18.8.2	—	50	000000000	00000
		2"	0.125" to 0.129"	0.028"	1,000			Not Rated	ASME B18.8.2	—	25	000000000	00000


		2 1/4"	0.125" to 0.129"	0.028"	1,000			Not Rated	ASME B18.8.2	—	25	000000000	00000
		2 1/2"	0.125" to 0.129"	0.028"	1,000			Not Rated	ASME B18.8.2	—	25	000000000	00000




				5/32" Diameter

				3/8"	0.156" to 0.16"	0.032"	1,600	Not Rated	ASME B18.8.2	—	50	000000000	0000


				7/16"	0.156" to 0.16"	0.032"	1,600	Not Rated	ASME B18.8.2	—	100	000000000	00000
				1/2"	0.156" to 0.16"	0.032"	1,600	Not Rated	ASME B18.8.2	—	100	000000000	00000
				9/16"	0.156" to 0.16"	0.032"	1,600	Not Rated	ASME B18.8.2	—	100	000000000	00000
				5/8"	0.156" to 0.16"	0.032"	1,600	Not Rated	ASME B18.8.2	—	100	000000000	00000
				3/4"	0.156" to 0.16"	0.032"	1,600	Not Rated	ASME B18.8.2	—	100	000000000	00000
				7/8"	0.156" to 0.16"	0.032"	1,600	Not Rated	ASME B18.8.2	—	100	000000000	00000
				1"	0.156" to 0.16"	0.032"	1,600	Not Rated	ASME B18.8.2	—	100	000000000	00000
				1 1/8"	0.156" to 0.16"	0.032"	1,600	Not Rated	ASME B18.8.2	—	100	000000000	00000
				1 1/4"	0.156" to 0.16"	0.032"	1,600	Not Rated	ASME B18.8.2	—	100	000000000	00000
				1 3/8"	0.156" to 0.16"	0.032"	1,600	Not Rated	ASME B18.8.2	—	25	000000000	0000


				1 1/2"	0.156" to 0.16"	0.032"	1,600	Not Rated	ASME B18.8.2	—	25	000000000	0000
				1 3/4"	0.156" to 0.16"	0.032"	1,600	Not Rated	ASME B18.8.2	—	25	000000000	00000
				2"	0.156" to 0.16"	0.032"	1,600	Not Rated	ASME B18.8.2	—	25	000000000	00000
				2 1/2"	0.156" to 0.16"	0.032"	1,600	Not Rated	ASME B18.8.2	—	10	000000000	0000




						3/16" Diameter

3/8"						0.187" to 0.192"	0.04"	2,400	Not Rated	ASME B18.8.2	—	50	000000000	0000


7/16"	0.187" to 0.192"					0.04"	2,400	Not Rated	ASME B18.8.2	—	25	000000000	0000
1/2"	0.187" to 0.192"					0.04"	2,400	Not Rated	ASME B18.8.2	—	50	000000000	0000
9/16"	0.187" to 0.192"					0.04"	2,400	Not Rated	ASME B18.8.2	—	50	000000000	0000
5/8"	0.187" to 0.192"					0.04"	2,400	Not Rated	ASME B18.8.2	—	50	000000000	00000
11/16"	0.187" to 0.192"					0.04"	2,400	Not Rated	ASME B18.8.2	—	50	000000000	00000
3/4"	0.187" to 0.192"					0.04"	2,400	Not Rated	ASME B18.8.2	—	50	000000000	00000
13/16"	0.187" to 0.192"					0.04"	2,400	Not Rated	ASME B18.8.2	—	25	000000000	0000
7/8"	0.187" to 0.192"					0.04"	2,400	Not Rated	ASME B18.8.2	—	50	000000000	00000
1"	0.187" to 0.192"					0.04"	2,400	Not Rated	ASME B18.8.2	—	50	000000000	00000
1 1/8"	0.187" to 0.192"					0.04"	2,400	Not Rated	ASME B18.8.2	—	50	000000000	00000


1 1/4"	0.187" to 0.192"					0.04"	2,400	Not Rated	ASME B18.8.2	—	50	000000000	00000
1 3/8"	0.187" to 0.192"					0.04"	2,400	Not Rated	ASME B18.8.2	—	25	000000000	00000
1 1/2"	0.187" to 0.192"					0.04"	2,400	Not Rated	ASME B18.8.2	—	25	000000000	00000
1 5/8"	0.187" to 0.192"					0.04"	2,400	Not Rated	ASME B18.8.2	—	25	000000000	00000
1 3/4"	0.187" to 0.192"					0.04"	2,400	Not Rated	ASME B18.8.2	—	25	000000000	00000
1 7/8"	0.187" to 0.192"					0.04"	2,400	Not Rated	ASME B18.8.2	—	25	000000000	00000
2"	0.187" to 0.192"					0.04"	2,400	Not Rated	ASME B18.8.2	—	25	000000000	00000
2 1/4"	0.187" to 0.192"					0.04"	2,400	Not Rated	ASME B18.8.2	—	25	000000000	00000
2 1/2"	0.187" to 0.192"					0.04"	2,400	Not Rated	ASME B18.8.2	—	25	000000000	00000
3"	0.187" to 0.192"					0.04"	2,400	Not Rated	ASME B18.8.2	—	10	000000000	00000




						7/32" Diameter

						1/2"	0.219" to 0.224"	0.048"	3,400	Not Rated	ASME B18.8.2	—	50	000000000	00000


						5/8"	0.219" to 0.224"	0.048"	3,400	Not Rated	ASME B18.8.2	—	25	000000000	00000
		3/4"				0.219" to 0.224"	0.048"	3,400	Not Rated	ASME B18.8.2	—	25	000000000	00000
		1"	0.219" to 0.224"			0.048"	3,400	Not Rated	ASME B18.8.2	—	25	000000000	00000
		1 1/4"	0.219" to 0.224"			0.048"	3,400	Not Rated	ASME B18.8.2	—	25	000000000	00000
		1 1/2"	0.219" to 0.224"			0.048"	3,400	Not Rated	ASME B18.8.2	—	25	000000000	00000
		1 3/4"	0.219" to 0.224"			0.048"	3,400	Not Rated	ASME B18.8.2	—	25	000000000	00000
		2"	0.219" to 0.224"			0.048"	3,400	Not Rated	ASME B18.8.2	—	25	000000000	00000
		2 1/4"	0.219" to 0.224"			0.048"	3,400	Not Rated	ASME B18.8.2	—	10	000000000	0000
		2 1/2"	0.219" to 0.224"			0.048"	3,400	Not Rated	ASME B18.8.2	—	10	000000000	0000
		2 3/4"	0.219" to 0.224"			0.048"	3,400	Not Rated	ASME B18.8.2	—	10	000000000	00000


		3"	0.219" to 0.224"			0.048"	3,400	Not Rated	ASME B18.8.2	—	10	000000000	00000




						1/4" Diameter

						3/8"	0.25" to 0.256"	0.048"	4,100	Not Rated	ASME B18.8.2	—	50	000000000	00000


						1/2"	0.25" to 0.256"	0.048"	4,100	Not Rated	ASME B18.8.2	—	25	000000000	0000
						9/16"	0.25" to 0.256"	0.048"	4,100	Not Rated	ASME B18.8.2	—	50	000000000	00000
						5/8"	0.25" to 0.256"	0.048"	4,100	Not Rated	ASME B18.8.2	—	50	000000000	00000
						11/16"	0.25" to 0.256"	0.048"	4,100	Not Rated	ASME B18.8.2	—	50	000000000	00000
				3/4"		0.25" to 0.256"	0.048"	4,100	Not Rated	ASME B18.8.2	—	50	000000000	00000
				7/8"	0.25" to 0.256"	0.048"	4,100	Not Rated	ASME B18.8.2	—	50	000000000	00000
				1"	0.25" to 0.256"	0.048"	4,100	Not Rated	ASME B18.8.2	—	50	000000000	00000
				1 1/8"	0.25" to 0.256"	0.048"	4,100	Not Rated	ASME B18.8.2	—	25	000000000	00000
				1 1/4"	0.25" to 0.256"	0.048"	4,100	Not Rated	ASME B18.8.2	—	25	000000000	00000
				1 3/8"	0.25" to 0.256"	0.048"	4,100	Not Rated	ASME B18.8.2	—	25	000000000	00000


				1 1/2"	0.25" to 0.256"	0.048"	4,100	Not Rated	ASME B18.8.2	—	25	000000000	00000
				1 5/8"	0.25" to 0.256"	0.048"	4,100	Not Rated	ASME B18.8.2	—	25	000000000	00000
				1 3/4"	0.25" to 0.256"	0.048"	4,100	Not Rated	ASME B18.8.2	—	25	000000000	00000
				1 7/8"	0.25" to 0.256"	0.048"	4,100	Not Rated	ASME B18.8.2	—	10	000000000	00000
				2"	0.25" to 0.256"	0.048"	4,100	Not Rated	ASME B18.8.2	—	10	000000000	00000
				2 1/4"	0.25" to 0.256"	0.048"	4,100	Not Rated	ASME B18.8.2	—	10	000000000	00000
				2 1/2"	0.25" to 0.256"	0.048"	4,100	Not Rated	ASME B18.8.2	—	10	000000000	00000
				2 3/4"	0.25" to 0.256"	0.048"	4,100	Not Rated	ASME B18.8.2	—	10	000000000	00000
				3"	0.25" to 0.256"	0.048"	4,100	Not Rated	ASME B18.8.2	—	10	000000000	00000
				3 1/4"	0.25" to 0.256"	0.048"	4,100	Not Rated	ASME B18.8.2	—	10	000000000	00000


				3 1/2"	0.25" to 0.256"	0.048"	4,100	Not Rated	ASME B18.8.2	—	5	000000000	00000
				4"	0.25" to 0.256"	0.048"	4,100	Not Rated	ASME B18.8.2	—	5	000000000	00000




						5/16" Diameter

						3/4"	0.312" to 0.318"	0.062"	6,300	Not Rated	ASME B18.8.2	—	10	000000000	00000


1"						0.312" to 0.318"	0.062"	6,300	Not Rated	ASME B18.8.2	—	25	000000000	00000
1 1/4"	0.312" to 0.318"					0.062"	6,300	Not Rated	ASME B18.8.2	—	10	000000000	0000
1 1/2"	0.312" to 0.318"					0.062"	6,300	Not Rated	ASME B18.8.2	—	10	000000000	00000
1 3/4"	0.312" to 0.318"					0.062"	6,300	Not Rated	ASME B18.8.2	—	10	000000000	00000
2"	0.312" to 0.318"					0.062"	6,300	Not Rated	ASME B18.8.2	—	10	000000000	00000
2 1/4"	0.312" to 0.318"					0.062"	6,300	Not Rated	ASME B18.8.2	—	5	000000000	00000
2 1/2"	0.312" to 0.318"					0.062"	6,300	Not Rated	ASME B18.8.2	—	10	000000000	00000
2 3/4"	0.312" to 0.318"					0.062"	6,300	Not Rated	ASME B18.8.2	—	10	000000000	00000
3"	0.312" to 0.318"					0.062"	6,300	Not Rated	ASME B18.8.2	—	10	000000000	00000
3 1/4"	0.312" to 0.318"					0.062"	6,300	Not Rated	ASME B18.8.2	—	5	000000000	00000


3 1/2"	0.312" to 0.318"					0.062"	6,300	Not Rated	ASME B18.8.2	—	1	000000000	0000
3 3/4"	0.312" to 0.318"					0.062"	6,300	Not Rated	ASME B18.8.2	—	5	000000000	0000
4"	0.312" to 0.318"					0.062"	6,300	Not Rated	ASME B18.8.2	—	5	000000000	00000




						3/8" Diameter

						3/4"	0.375" to 0.382"	0.077"	9,500	Not Rated	ASME B18.8.2	—	5	000000000	0000


		1"	0.375" to 0.382"			0.077"	9,500	Not Rated	ASME B18.8.2	—	10	000000000	00000
		1 1/4"	0.375" to 0.382"			0.077"	9,500	Not Rated	ASME B18.8.2	—	10	000000000	00000
		1 1/2"	0.375" to 0.382"			0.077"	9,500	Not Rated	ASME B18.8.2	—	10	000000000	00000
		1 3/4"	0.375" to 0.382"			0.077"	9,500	Not Rated	ASME B18.8.2	—	5	000000000	00000
		2"	0.375" to 0.382"			0.077"	9,500	Not Rated	ASME B18.8.2	—	10	000000000	00000
		2 1/4"	0.375" to 0.382"			0.077"	9,500	Not Rated	ASME B18.8.2	—	5	000000000	0000
		2 1/2"	0.375" to 0.382"			0.077"	9,500	Not Rated	ASME B18.8.2	—	5	000000000	0000
		2 3/4"	0.375" to 0.382"			0.077"	9,500	Not Rated	ASME B18.8.2	—	5	000000000	00000
		3"	0.375" to 0.382"			0.077"	9,500	Not Rated	ASME B18.8.2	—	5	000000000	00000
		3 1/4"	0.375" to 0.382"			0.077"	9,500	Not Rated	ASME B18.8.2	—	1	000000000	0000


		3 1/2"	0.375" to 0.382"			0.077"	9,500	Not Rated	ASME B18.8.2	—	1	000000000	0000
		3 3/4"	0.375" to 0.382"			0.077"	9,500	Not Rated	ASME B18.8.2	—	1	000000000	0000
		4"	0.375" to 0.382"			0.077"	9,500	Not Rated	ASME B18.8.2	—	1	000000000	0000




						7/16" Diameter

						1 3/4"	0.437" to 0.445"	0.077"	11,500	Not Rated	ASME B18.8.2	—	5	000000000	00000


						2"	0.437" to 0.445"	0.077"	11,500	Not Rated	ASME B18.8.2	—	1	000000000	0000
						2 1/2"	0.437" to 0.445"	0.077"	11,500	Not Rated	ASME B18.8.2	—	1	000000000	0000
						3"	0.437" to 0.445"	0.077"	11,500	Not Rated	ASME B18.8.2	—	1	000000000	0000
						4"	0.437" to 0.445"	0.077"	11,500	Not Rated	ASME B18.8.2	—	1	000000000	0000




								1/2" Diameter

				1 1/4"	0.5" to 0.51"			0.094"	15,800	Not Rated	ASME B18.8.2	—	5	000000000	00000


				1 1/2"	0.5" to 0.51"			0.094"	15,800	Not Rated	ASME B18.8.2	—	1	000000000	0000
				2"	0.5" to 0.51"			0.094"	15,800	Not Rated	ASME B18.8.2	—	1	000000000	0000
				2 1/4"	0.5" to 0.51"			0.094"	15,800	Not Rated	ASME B18.8.2	—	1	000000000	0000
				2 1/2"	0.5" to 0.51"			0.094"	15,800	Not Rated	ASME B18.8.2	—	1	000000000	0000
				2 3/4"	0.5" to 0.51"			0.094"	15,800	Not Rated	ASME B18.8.2	—	1	000000000	0000
				3"	0.5" to 0.51"			0.094"	15,800	Not Rated	ASME B18.8.2	—	1	000000000	0000
				3 1/4"	0.5" to 0.51"			0.094"	15,800	Not Rated	ASME B18.8.2	—	1	000000000	0000
				3 1/2"	0.5" to 0.51"			0.094"	15,800	Not Rated	ASME B18.8.2	—	1	000000000	0000
				3 3/4"	0.5" to 0.51"			0.094"	15,800	Not Rated	ASME B18.8.2	—	1	000000000	0000
				4"	0.5" to 0.51"			0.094"	15,800	Not Rated	ASME B18.8.2	—	1	000000000	0000




								1 mm Diameter

								4 mm	1 mm	0.2 mm	Not Rated	Not Rated	ISO 8752	—	100	000000000	0000


								6 mm	1 mm	0.2 mm	Not Rated	Not Rated	ISO 8752	—	100	000000000	00000
8 mm								1 mm	0.2 mm	Not Rated	Not Rated	ISO 8752	—	100	000000000	00000




								1.5 mm Diameter

								4 mm	1.5 mm to 1.6 mm	0.3 mm	Not Rated	Not Rated	ISO 8752	—	100	000000000	0000


								5 mm	1.5 mm to 1.6 mm	0.3 mm	Not Rated	Not Rated	ISO 8752	—	100	000000000	0000
								6 mm	1.5 mm to 1.6 mm	0.3 mm	Not Rated	Not Rated	ISO 8752	—	25	000000000	0000
								8 mm	1.5 mm to 1.6 mm	0.3 mm	Not Rated	Not Rated	ISO 8752	—	25	000000000	0000
								10 mm	1.5 mm to 1.6 mm	0.3 mm	Not Rated	Not Rated	ISO 8752	—	25	000000000	0000
								12 mm	1.5 mm to 1.6 mm	0.3 mm	Not Rated	Not Rated	ISO 8752	—	25	000000000	0000




										2 mm Diameter

										4 mm	2 mm to 2.1 mm	0.4 mm	Not Rated	Not Rated	ISO 8752	—	100	000000000	0000


		5 mm								2 mm to 2.1 mm	0.4 mm	Not Rated	Not Rated	ISO 8752	—	100	000000000	0000
		6 mm	2 mm to 2.1 mm							0.4 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	25	000000000	0000
		8 mm	2 mm to 2.1 mm							0.4 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	25	000000000	0000
		10 mm	2 mm to 2.1 mm							0.4 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	25	000000000	0000
		12 mm	2 mm to 2.1 mm							0.4 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	25	000000000	0000
		14 mm	2 mm to 2.1 mm							0.4 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	25	000000000	0000
		16 mm	2 mm to 2.1 mm							0.4 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	25	000000000	0000
		18 mm	2 mm to 2.1 mm							0.4 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	25	000000000	0000
		20 mm	2 mm to 2.1 mm							0.4 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	25	000000000	0000
		22 mm	2 mm to 2.1 mm							0.4 mm	Not Rated	Not Rated	ISO 8752	—	25	000000000	0000


		24 mm	2 mm to 2.1 mm							0.4 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	25	000000000	0000
		30 mm	2 mm to 2.1 mm			0.4 mm				Not Rated	Not Rated	DIN 1481, ISO 8752	—	25	000000000	0000




						2.5 mm Diameter

						10 mm	2.5 mm to 2.6 mm			0.5 mm	Not Rated	Not Rated	ISO 8752	—	25	000000000	0000


						14 mm	2.5 mm to 2.6 mm			0.5 mm	Not Rated	Not Rated	ISO 8752	—	25	000000000	00000
						20 mm	2.5 mm to 2.6 mm			0.5 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	25	000000000	0000
						30 mm	2.5 mm to 2.6 mm			0.5 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	25	000000000	0000




										3 mm Diameter

				4 mm						3 mm to 3.65 mm	0.6 mm	Not Rated	Not Rated	ISO 8752	—	100	000000000	0000


				6 mm	3 mm to 3.1 mm					0.6 mm	Not Rated	Not Rated	ISO 8752	—	100	000000000	0000
				8 mm	3 mm to 3.1 mm					0.6 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	25	000000000	0000
				10 mm	3 mm to 3.1 mm					0.6 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	25	000000000	0000
				12 mm	3 mm to 3.1 mm					0.6 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	25	000000000	0000
				14 mm	3 mm to 3.1 mm					0.6 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	25	000000000	0000
				16 mm	3 mm to 3.1 mm					0.6 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	25	000000000	0000
				18 mm	3 mm to 3.1 mm					0.6 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	25	000000000	0000
				20 mm	3 mm to 3.1 mm					0.6 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	10	000000000	0000
22 mm				3 mm to 3.1 mm	0.6 mm					Not Rated	Not Rated	ISO 8752	—	10	000000000	0000
24 mm	3 mm to 3.1 mm			0.6 mm	Not Rated					Not Rated	DIN 1481, ISO 8752	—	10	000000000	0000


26 mm	3 mm to 3.1 mm			0.6 mm	Not Rated					Not Rated	DIN 1481, ISO 8752	—	10	000000000	0000
28 mm	3 mm to 3.1 mm			0.6 mm	Not Rated					Not Rated	DIN 1481, ISO 8752	—	10	000000000	0000
30 mm	3 mm to 3.1 mm			0.6 mm	Not Rated					Not Rated	DIN 1481, ISO 8752	—	10	000000000	0000
40 mm	3 mm to 3.1 mm			0.6 mm	Not Rated					Not Rated	DIN 1481, ISO 8752	—	10	000000000	0000




				3.5 mm Diameter

				10 mm	3.5 mm to 3.65 mm					0.75 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	50	000000000	00000


				20 mm	3.5 mm to 3.6 mm			0.7 mm	Not Rated	Not Rated	ISO 8752	—	50	000000000	0000
				30 mm	3.5 mm to 3.6 mm			0.7 mm	Not Rated	Not Rated	ISO 8752	—	50	000000000	0000




								4 mm Diameter

								8 mm	4 mm to 4.2 mm	0.8 mm	Not Rated	Not Rated	ISO 8752	—	10	000000000	0000


								10 mm	4 mm to 4.2 mm	0.8 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	10	000000000	0000
								12 mm	4 mm to 4.2 mm	0.8 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	10	000000000	0000
								14 mm	4 mm to 4.2 mm	0.8 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	10	000000000	0000
								16 mm	4 mm to 4.2 mm	0.8 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	10	000000000	0000
								18 mm	4 mm to 4.2 mm	0.8 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	10	000000000	0000
								20 mm	4 mm to 4.2 mm	0.8 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	10	000000000	0000
								22 mm	4 mm to 4.2 mm	0.8 mm	Not Rated	Not Rated	ISO 8752	—	10	000000000	0000
								24 mm	4 mm to 4.2 mm	0.8 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	10	000000000	0000
								26 mm	4 mm to 4.2 mm	0.8 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	10	000000000	0000
		30 mm						4 mm to 4.2 mm	0.8 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	10	000000000	0000


		32 mm	4 mm to 4.2 mm					0.8 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	10	000000000	0000
		36 mm	4 mm to 4.2 mm					0.8 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	10	000000000	0000
		40 mm	4 mm to 4.2 mm					0.8 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	10	000000000	0000
		45 mm	4 mm to 4.2 mm					0.8 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	10	000000000	0000
		50 mm	4 mm to 4.2 mm					0.8 mm	Not Rated	Not Rated	ISO 8752	—	5	000000000	00000




								5 mm Diameter

						10 mm	5 mm to 5.2 mm	1 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	10	000000000	0000


						12 mm	5 mm to 5.2 mm	1 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	10	000000000	0000
						14 mm	5 mm to 5.2 mm	1 mm	Not Rated	Not Rated	ISO 8752	—	10	000000000	0000
						16 mm	5 mm to 5.2 mm	1 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	10	000000000	0000
						18 mm	5 mm to 5.2 mm	1 mm	Not Rated	Not Rated	ISO 8752	—	10	000000000	0000
						20 mm	5 mm to 5.2 mm	1 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	10	000000000	0000
						22 mm	5 mm to 5.2 mm	1 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	10	000000000	0000
						24 mm	5 mm to 5.2 mm	1 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	10	000000000	0000
						26 mm	5 mm to 5.2 mm	1 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	10	000000000	0000
						28 mm	5 mm to 5.2 mm	1 mm	Not Rated	Not Rated	ISO 8752	—	10	000000000	0000
						30 mm	5 mm to 5.2 mm	1 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	10	000000000	0000


						32 mm	5 mm to 5.2 mm	1 mm	Not Rated	Not Rated	ISO 8752	—	10	000000000	0000
						36 mm	5 mm to 5.2 mm	1 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	10	000000000	0000
						40 mm	5 mm to 5.2 mm	1 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	10	000000000	0000
						45 mm	5 mm to 5.2 mm	1 mm	Not Rated	Not Rated	ISO 8752	—	10	000000000	0000
						50 mm	5 mm to 5.2 mm	1 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	10	000000000	0000




	6 mm Diameter

	12 mm						6 mm to 6.2 mm	1.2 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	10	000000000	0000


	14 mm						6 mm to 6.2 mm	1.2 mm	Not Rated	Not Rated	ISO 8752	—	10	000000000	0000
	16 mm						6 mm to 6.2 mm	1.2 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	10	000000000	0000
	20 mm						6 mm to 6.2 mm	1.2 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	10	000000000	0000
	24 mm						6 mm to 6.2 mm	1.2 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	10	000000000	0000
	26 mm						6 mm to 6.2 mm	1.2 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	10	000000000	0000
	30 mm						6 mm to 6.2 mm	1.2 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	10	000000000	0000
	36 mm			6 mm to 6.2 mm			1.2 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	10	000000000	00000
	40 mm			6 mm to 6.2 mm	1.2 mm		Not Rated	Not Rated	DIN 1481, ISO 8752	—	10	000000000	0000
	45 mm			6 mm to 6.2 mm	1.2 mm		Not Rated	Not Rated	DIN 1481, ISO 8752	—	10	000000000	00000
	50 mm			6 mm to 6.2 mm	1.2 mm		Not Rated	Not Rated	DIN 1481, ISO 8752	—	5	000000000	0000


	60 mm			6 mm to 6.2 mm	1.2 mm		Not Rated	Not Rated	DIN 1481, ISO 8752	—	5	000000000	0000




					8 mm Diameter

					22 mm		8 mm to 8.25 mm	1.5 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	10	000000000	00000


					26 mm		8 mm to 8.25 mm	1.5 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	10	000000000	00000
					30 mm		8 mm to 8.25 mm	1.5 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	10	000000000	0000
					40 mm		8 mm to 8.25 mm	1.5 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	5	000000000	0000
					50 mm		8 mm to 8.25 mm	1.5 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	1	000000000	0000
					55 mm		8 mm to 8.25 mm	1.5 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	1	000000000	0000
					60 mm		8 mm to 8.25 mm	1.5 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	1	000000000	0000
					100 mm		8 mm to 8.25 mm	1.5 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	1	000000000	0000




			10 mm Diameter

			24 mm				10 mm to 10.3 mm	2 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	1	000000000	0000


			30 mm				10 mm to 10.3 mm	2 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	1	000000000	0000
			36 mm				10 mm to 10.3 mm	2 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	1	000000000	0000
			40 mm				10 mm to 10.3 mm	2 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	1	000000000	0000
			50 mm				10 mm to 10.3 mm	2 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	1	000000000	0000
			60 mm				10 mm to 10.3 mm	2 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	1	000000000	0000
			80 mm				10 mm to 10.3 mm	2 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	1	000000000	0000
			100 mm				10 mm to 10.3 mm	2 mm	Not Rated	Not Rated	DIN 1481, ISO 8752	—	1	000000000	0000


			Highly-Corrosion-Resistant 316 Stainless Steel







										1/16" Diameter

										1/4"	0.062" to 0.065"	0.012"	200	Not Rated	ASME B18.8.2	—	100	000000000	00000


5/16"										0.062" to 0.065"	0.012"	200	Not Rated	ASME B18.8.2	—	100	000000000	00000
3/8"						0.062" to 0.065"				0.012"	200	Not Rated	ASME B18.8.2	—	100	000000000	00000
1/2"						0.062" to 0.065"				0.012"	200	Not Rated	ASME B18.8.2	—	100	000000000	00000
5/8"						0.062" to 0.065"				0.012"	200	Not Rated	ASME B18.8.2	—	100	000000000	00000
3/4"						0.062" to 0.065"				0.012"	200	Not Rated	ASME B18.8.2	—	100	000000000	00000
1"						0.062" to 0.065"				0.012"	200	Not Rated	ASME B18.8.2	—	100	000000000	00000




										3/32" Diameter

										1/4"	0.094" to 0.097"	0.022"	600	Not Rated	ASME B18.8.2	—	100	000000000	00000


										5/16"	0.094" to 0.097"	0.022"	600	Not Rated	ASME B18.8.2	—	100	000000000	00000
										3/8"	0.094" to 0.097"	0.022"	600	Not Rated	ASME B18.8.2	—	100	000000000	00000
										7/16"	0.094" to 0.097"	0.022"	600	Not Rated	ASME B18.8.2	—	50	000000000	0000
										1/2"	0.094" to 0.097"	0.022"	600	Not Rated	ASME B18.8.2	—	50	000000000	00000
	5/8"									0.094" to 0.097"	0.022"	600	Not Rated	ASME B18.8.2	—	50	000000000	00000
	3/4"									0.094" to 0.097"	0.022"	600	Not Rated	ASME B18.8.2	—	50	000000000	00000
	7/8"									0.094" to 0.097"	0.022"	600	Not Rated	ASME B18.8.2	—	50	000000000	00000
	1"			0.094" to 0.097"						0.022"	600	Not Rated	ASME B18.8.2	—	50	000000000	00000
	1 1/4"			0.094" to 0.097"						0.022"	600	Not Rated	ASME B18.8.2	—	25	000000000	0000
	1 1/2"			0.094" to 0.097"						0.022"	600	Not Rated	ASME B18.8.2	—	25	000000000	0000




										1/8" Diameter

										3/8"	0.125" to 0.129"	0.028"	1,000	Not Rated	ASME B18.8.2	—	50	000000000	00000


										7/16"	0.125" to 0.129"	0.028"	1,000	Not Rated	ASME B18.8.2	—	50	000000000	00000
										1/2"	0.125" to 0.129"	0.028"	1,000	Not Rated	ASME B18.8.2	—	50	000000000	00000
		5/8"								0.125" to 0.129"	0.028"	1,000	Not Rated	ASME B18.8.2	—	50	000000000	00000
		3/4"			0.125" to 0.129"					0.028"	1,000	Not Rated	ASME B18.8.2	—	50	000000000	00000
		7/8"			0.125" to 0.129"					0.028"	1,000	Not Rated	ASME B18.8.2	—	25	000000000	0000
		1"			0.125" to 0.129"					0.028"	1,000	Not Rated	ASME B18.8.2	—	25	000000000	00000
		1 1/4"			0.125" to 0.129"					0.028"	1,000	Not Rated	ASME B18.8.2	—	25	000000000	00000
		1 1/2"			0.125" to 0.129"					0.028"	1,000	Not Rated	ASME B18.8.2	—	25	000000000	00000
		1 3/4"			0.125" to 0.129"					0.028"	1,000	Not Rated	ASME B18.8.2	—	25	000000000	00000
		2"			0.125" to 0.129"					0.028"	1,000	Not Rated	ASME B18.8.2	—	10	000000000	0000




										5/32" Diameter

										1/2"	0.156" to 0.16"	0.032"	1,600	Not Rated	ASME B18.8.2	—	25	000000000	0000


			5/8"				0.156" to 0.16"			0.032"	1,600	Not Rated	ASME B18.8.2	—	25	000000000	0000
			3/4"				0.156" to 0.16"			0.032"	1,600	Not Rated	ASME B18.8.2	—	25	000000000	0000
			7/8"				0.156" to 0.16"			0.032"	1,600	Not Rated	ASME B18.8.2	—	25	000000000	0000
			1"				0.156" to 0.16"			0.032"	1,600	Not Rated	ASME B18.8.2	—	25	000000000	0000
			1 1/4"				0.156" to 0.16"	0.032"		1,600	Not Rated	ASME B18.8.2	—	25	000000000	00000
			1 1/2"				0.156" to 0.16"	0.032"	1,600	Not Rated	ASME B18.8.2	—	10	000000000	0000
			1 3/4"				0.156" to 0.16"	0.032"	1,600	Not Rated	ASME B18.8.2	—	10	000000000	0000




								3/16" Diameter

								1/2"	0.187" to 0.192"	0.04"	2,400	Not Rated	ASME B18.8.2	—	25	000000000	00000


								5/8"	0.187" to 0.192"	0.04"	2,400	Not Rated	ASME B18.8.2	—	25	000000000	00000
								3/4"	0.187" to 0.192"	0.04"	2,400	Not Rated	ASME B18.8.2	—	25	000000000	00000
								7/8"	0.187" to 0.192"	0.04"	2,400	Not Rated	ASME B18.8.2	—	10	000000000	0000
1"								0.187" to 0.192"	0.04"	2,400	Not Rated	ASME B18.8.2	—	10	000000000	0000
1 1/4"						0.187" to 0.192"		0.04"	2,400	Not Rated	ASME B18.8.2	—	10	000000000	00000
1 1/2"						0.187" to 0.192"		0.04"	2,400	Not Rated	ASME B18.8.2	—	10	000000000	00000
1 3/4"						0.187" to 0.192"		0.04"	2,400	Not Rated	ASME B18.8.2	—	10	000000000	00000
2"						0.187" to 0.192"		0.04"	2,400	Not Rated	ASME B18.8.2	—	10	000000000	00000




								1/4" Diameter

								5/8"	0.25" to 0.256"	0.048"	4,100	Not Rated	ASME B18.8.2	—	10	000000000	0000


								3/4"	0.25" to 0.256"	0.048"	4,100	Not Rated	ASME B18.8.2	—	10	000000000	0000
								7/8"	0.25" to 0.256"	0.048"	4,100	Not Rated	ASME B18.8.2	—	10	000000000	0000
								1"	0.25" to 0.256"	0.048"	4,100	Not Rated	ASME B18.8.2	—	10	000000000	0000
								1 1/4"	0.25" to 0.256"	0.048"	4,100	Not Rated	ASME B18.8.2	—	10	000000000	00000
								1 1/2"	0.25" to 0.256"	0.048"	4,100	Not Rated	ASME B18.8.2	—	5	000000000	0000
	2"							0.25" to 0.256"	0.048"	4,100	Not Rated	ASME B18.8.2	—	5	000000000	0000
	2 1/2"			0.25" to 0.256"				0.048"	4,100	Not Rated	ASME B18.8.2	—	5	000000000	00000
	3"			0.25" to 0.256"				0.048"	4,100	Not Rated	ASME B18.8.2	—	5	000000000	00000




								5/16" Diameter

								1"	0.312" to 0.318"	0.063"	6,300	Not Rated	ASME B18.8.2	—	5	000000000	0000


								1 1/4"	0.312" to 0.318"	0.063"	6,300	Not Rated	ASME B18.8.2	—	5	000000000	0000
								1 1/2"	0.312" to 0.318"	0.063"	6,300	Not Rated	ASME B18.8.2	—	5	000000000	0000
								2"	0.312" to 0.318"	0.063"	6,300	Not Rated	ASME B18.8.2	—	5	000000000	00000
								3"	0.312" to 0.318"	0.063"	6,300	Not Rated	ASME B18.8.2	—	5	000000000	00000




					3/8" Diameter

					3/4"				0.375" to 0.382"	0.077"	9,500	Not Rated	ASME B18.8.2	—	1	000000000	0000


					1"				0.375" to 0.382"	0.077"	9,500	Not Rated	ASME B18.8.2	—	1	000000000	0000
					1 1/4"				0.375" to 0.382"	0.077"	9,500	Not Rated	ASME B18.8.2	—	1	000000000	0000
					1 1/2"				0.375" to 0.382"	0.077"	9,500	Not Rated	ASME B18.8.2	—	1	000000000	0000
					1 3/4"				0.375" to 0.382"	0.077"	9,500	Not Rated	ASME B18.8.2	—	1	000000000	0000
					2"				0.375" to 0.382"	0.077"	9,500	Not Rated	ASME B18.8.2	—	1	000000000	0000
					2 1/2"				0.375" to 0.382"	0.077"	9,500	Not Rated	ASME B18.8.2	—	1	000000000	0000
					3"				0.375" to 0.382"	0.077"	9,500	Not Rated	ASME B18.8.2	—	1	000000000	0000
					4"				0.375" to 0.382"	0.077"	9,500	Not Rated	ASME B18.8.2	—	1	000000000	0000


			Wear-Resistant 400 Series Stainless Steel







										1/16" Diameter

										3/16"	0.062" to 0.065"	0.012"	430	Rockwell C43	ASME B18.8.2	—	100	000000000	0000


										1/4"	0.062" to 0.065"	0.012"	400	Rockwell C43	—	MS16562-190	5	000000000	0000
										1/4"	0.062" to 0.065"	0.012"	430	Rockwell C43	ASME B18.8.2	—	100	000000000	0000
										5/16"	0.062" to 0.065"	0.012"	430	Rockwell C43	ASME B18.8.2	—	100	000000000	0000
										3/8"	0.062" to 0.065"	0.012"	400	Rockwell C43	—	MS16562-192	5	000000000	0000
3/8"										0.062" to 0.065"	0.012"	430	Rockwell C43	ASME B18.8.2	—	100	000000000	00000
7/16"										0.062" to 0.065"	0.012"	430	Rockwell C43	ASME B18.8.2	—	100	000000000	00000
1/2"										0.062" to 0.065"	0.012"	400	Rockwell C43	—	MS16562-194	5	000000000	0000
1/2"						0.062" to 0.065"				0.012"	430	Rockwell C43	ASME B18.8.2	—	100	000000000	00000
9/16"						0.062" to 0.065"				0.012"	430	Rockwell C43	ASME B18.8.2	—	100	000000000	00000
5/8"						0.062" to 0.065"				0.012"	430	Rockwell C43	ASME B18.8.2	—	100	000000000	00000


11/16"						0.062" to 0.065"				0.012"	430	Rockwell C43	ASME B18.8.2	—	100	000000000	00000
3/4"						0.062" to 0.065"				0.012"	430	Rockwell C43	ASME B18.8.2	—	100	000000000	00000
13/16"						0.062" to 0.065"				0.012"	430	Rockwell C43	ASME B18.8.2	—	100	000000000	0000
7/8"						0.062" to 0.065"				0.012"	430	Rockwell C43	ASME B18.8.2	—	100	000000000	00000
15/16"						0.062" to 0.065"				0.012"	430	Rockwell C43	ASME B18.8.2	—	100	000000000	00000
1"						0.062" to 0.065"				0.012"	430	Rockwell C43	ASME B18.8.2	—	100	000000000	00000




						5/64" Diameter

				3/16"		0.078" to 0.081"				0.018"	800	Rockwell C43	ASME B18.8.2	—	100	000000000	00000


				1/4"		0.078" to 0.081"				0.018"	800	Rockwell C43	ASME B18.8.2	—	100	000000000	00000
				5/16"		0.078" to 0.081"				0.018"	800	Rockwell C43	ASME B18.8.2	—	100	000000000	00000
				3/8"		0.078" to 0.081"				0.018"	800	Rockwell C43	ASME B18.8.2	—	100	000000000	00000
				7/16"		0.078" to 0.081"				0.018"	800	Rockwell C43	ASME B18.8.2	—	100	000000000	00000
				1/2"		0.078" to 0.081"				0.018"	800	Rockwell C43	ASME B18.8.2	—	100	000000000	00000
				9/16"		0.078" to 0.081"				0.018"	800	Rockwell C43	ASME B18.8.2	—	50	000000000	00000
				5/8"		0.078" to 0.081"				0.018"	800	Rockwell C43	ASME B18.8.2	—	100	000000000	00000
				11/16"		0.078" to 0.081"				0.018"	800	Rockwell C43	ASME B18.8.2	—	100	000000000	00000
		3/4"		0.078" to 0.081"		0.018"				800	Rockwell C43	ASME B18.8.2	—	50	000000000	00000
		13/16"		0.078" to 0.081"		0.018"				800	Rockwell C43	ASME B18.8.2	—	50	000000000	00000


		7/8"		0.078" to 0.081"		0.018"		800		Rockwell C43	ASME B18.8.2	—	100	000000000	00000
		1"		0.078" to 0.081"		0.018"		800		Rockwell C43	ASME B18.8.2	—	50	000000000	00000
		1 1/4"		0.078" to 0.081"		0.018"		800		Rockwell C43	ASME B18.8.2	—	100	000000000	00000
		1 1/2"		0.078" to 0.081"		0.018"		800		Rockwell C43	ASME B18.8.2	—	50	000000000	00000




						3/32" Diameter

						3/16"		0.094" to 0.097"		0.022"	1,100	Rockwell C43	ASME B18.8.2	—	100	000000000	0000


			1/4"			0.094" to 0.097"		0.022"		1,100	Rockwell C43	ASME B18.8.2	—	100	000000000	0000
			5/16"		0.094" to 0.097"	0.022"		1,100		Rockwell C43	ASME B18.8.2	—	100	000000000	0000
			3/8"		0.094" to 0.097"	0.022"		1,100		Rockwell C43	ASME B18.8.2	—	100	000000000	00000
			7/16"		0.094" to 0.097"	0.022"		1,100		Rockwell C43	ASME B18.8.2	—	100	000000000	00000
			1/2"		0.094" to 0.097"	0.022"		1,100		Rockwell C43	ASME B18.8.2	—	100	000000000	00000
			9/16"		0.094" to 0.097"	0.022"		1,100		Rockwell C43	ASME B18.8.2	—	100	000000000	00000
			5/8"		0.094" to 0.097"	0.022"		1,100		Rockwell C43	ASME B18.8.2	—	100	000000000	00000
			11/16"		0.094" to 0.097"	0.022"	1,100	Rockwell C43		ASME B18.8.2	—	100	000000000	00000
			3/4"		0.094" to 0.097"	0.022"	1,100	Rockwell C43	ASME B18.8.2	—	100	000000000	00000
			13/16"		0.094" to 0.097"	0.022"	1,100	Rockwell C43	ASME B18.8.2	—	100	000000000	00000


			7/8"		0.094" to 0.097"	0.022"	1,100	Rockwell C43	ASME B18.8.2	—	100	000000000	00000
			15/16"		0.094" to 0.097"	0.022"	1,100	Rockwell C43	ASME B18.8.2	—	100	000000000	00000
			1"		0.094" to 0.097"	0.022"	1,100	Rockwell C43	ASME B18.8.2	—	100	000000000	00000
			1 1/8"		0.094" to 0.097"	0.022"	1,100	Rockwell C43	ASME B18.8.2	—	100	000000000	00000
			1 1/4"		0.094" to 0.097"	0.022"	1,100	Rockwell C43	ASME B18.8.2	—	50	000000000	00000
			1 3/8"		0.094" to 0.097"	0.022"	1,100	Rockwell C43	ASME B18.8.2	—	50	000000000	00000
			1 1/2"		0.094" to 0.097"	0.022"	1,100	Rockwell C43	ASME B18.8.2	—	50	000000000	00000




						1/8" Diameter

						1/4"	0.125" to 0.129"	0.028"	1,800	Rockwell C43	ASME B18.8.2	—	100	000000000	0000


						5/16"	0.125" to 0.129"	0.028"	1,800	Rockwell C43	ASME B18.8.2	—	100	000000000	00000
						3/8"	0.125" to 0.129"	0.028"	1,800	Rockwell C43	ASME B18.8.2	—	100	000000000	0000
						3/8"	0.125" to 0.129"	0.028"	2,100	Rockwell C43	—	MS16562-219	25	000000000	0000
						7/16"	0.125" to 0.129"	0.028"	1,800	Rockwell C43	ASME B18.8.2	—	100	000000000	0000
1/2"						0.125" to 0.129"	0.028"	1,800	Rockwell C43	ASME B18.8.2	—	100	000000000	00000
1/2"	0.125" to 0.129"					0.028"	2,100	Rockwell C43	—	MS16562-221	25	000000000	0000
9/16"	0.125" to 0.129"					0.028"	1,800	Rockwell C43	ASME B18.8.2	—	100	000000000	0000
5/8"	0.125" to 0.129"					0.028"	1,800	Rockwell C43	ASME B18.8.2	—	100	000000000	00000
11/16"	0.125" to 0.129"					0.028"	1,800	Rockwell C43	ASME B18.8.2	—	100	000000000	00000
3/4"	0.125" to 0.129"					0.028"	1,800	Rockwell C43	ASME B18.8.2	—	100	000000000	00000


3/4"	0.125" to 0.129"					0.028"	2,100	Rockwell C43	—	MS16562-224	25	000000000	00000
13/16"	0.125" to 0.129"					0.028"	1,800	Rockwell C43	ASME B18.8.2	—	100	000000000	00000
7/8"	0.125" to 0.129"					0.028"	1,800	Rockwell C43	ASME B18.8.2	—	100	000000000	00000
15/16"	0.125" to 0.129"					0.028"	1,800	Rockwell C46	ASME B18.8.2	—	100	000000000	00000
1"	0.125" to 0.129"					0.028"	1,800	Rockwell C43	ASME B18.8.2	—	100	000000000	00000
1"	0.125" to 0.129"					0.028"	2,100	Rockwell C43	—	MS16562-226	25	000000000	0000
1 1/8"	0.125" to 0.129"					0.028"	1,800	Rockwell C43	ASME B18.8.2	—	100	000000000	00000
1 1/4"	0.125" to 0.129"					0.028"	1,800	Rockwell C43	ASME B18.8.2	—	50	000000000	00000
1 3/8"	0.125" to 0.129"					0.028"	1,800	Rockwell C43	ASME B18.8.2	—	50	000000000	00000
1 1/2"	0.125" to 0.129"					0.028"	1,800	Rockwell C43	ASME B18.8.2	—	50	000000000	00000


1 5/8"	0.125" to 0.129"					0.028"	1,800	Rockwell C43	ASME B18.8.2	—	50	000000000	00000
1 3/4"	0.125" to 0.129"					0.028"	1,800	Rockwell C43	ASME B18.8.2	—	50	000000000	00000
1 7/8"	0.125" to 0.129"					0.028"	1,800	Rockwell C43	ASME B18.8.2	—	50	000000000	00000
2"	0.125" to 0.129"					0.028"	1,800	Rockwell C43	ASME B18.8.2	—	25	000000000	0000
2 1/4"	0.125" to 0.129"					0.028"	1,800	Rockwell C43	ASME B18.8.2	—	25	000000000	0000
2 1/2"	0.125" to 0.129"	0.028"				1,800	Rockwell C43	ASME B18.8.2	—	25	000000000	00000




		5/32" Diameter

		3/8"		0.156" to 0.16"		0.032"	2,700	Rockwell C43	ASME B18.8.2	—	100	000000000	00000


		7/16"		0.156" to 0.16"		0.032"	2,700	Rockwell C43	ASME B18.8.2	—	100	000000000	00000
		1/2"		0.156" to 0.16"		0.032"	2,700	Rockwell C43	ASME B18.8.2	—	100	000000000	00000
		9/16"		0.156" to 0.16"		0.032"	2,700	Rockwell C43	ASME B18.8.2	—	100	000000000	00000
		5/8"		0.156" to 0.16"		0.032"	2,700	Rockwell C43	ASME B18.8.2	—	100	000000000	00000
		3/4"		0.156" to 0.16"		0.032"	2,700	Rockwell C43	ASME B18.8.2	—	50	000000000	00000
		7/8"		0.156" to 0.16"		0.032"	2,700	Rockwell C43	ASME B18.8.2	—	100	000000000	00000
		1"		0.156" to 0.16"		0.032"	2,700	Rockwell C43	ASME B18.8.2	—	50	000000000	00000
		1 1/8"		0.156" to 0.16"		0.032"	2,700	Rockwell C43	ASME B18.8.2	—	50	000000000	00000
		1 1/4"		0.156" to 0.16"		0.032"	2,700	Rockwell C43	ASME B18.8.2	—	50	000000000	00000
		1 3/8"		0.156" to 0.16"		0.032"	2,700	Rockwell C43	ASME B18.8.2	—	25	000000000	0000


		1 1/2"		0.156" to 0.16"		0.032"	2,700	Rockwell C43	ASME B18.8.2	—	25	000000000	0000
		1 3/4"		0.156" to 0.16"		0.032"	2,700	Rockwell C43	ASME B18.8.2	—	25	000000000	0000
		2"		0.156" to 0.16"		0.032"	2,700	Rockwell C43	ASME B18.8.2	—	25	000000000	0000
		2 1/2"		0.156" to 0.16"		0.032"	2,700	Rockwell C43	ASME B18.8.2	—	25	000000000	0000




				3/16" Diameter

				3/8"	0.187" to 0.192"	0.04"	4,100	Rockwell C43	ASME B18.8.2	—	50	000000000	0000


				7/16"	0.187" to 0.192"	0.04"	4,100	Rockwell C43	ASME B18.8.2	—	25	000000000	00000
				1/2"	0.187" to 0.192"	0.04"	4,100	Rockwell C43	ASME B18.8.2	—	50	000000000	0000
				9/16"	0.187" to 0.192"	0.04"	4,100	Rockwell C43	ASME B18.8.2	—	50	000000000	0000
				5/8"	0.187" to 0.192"	0.04"	4,100	Rockwell C43	ASME B18.8.2	—	50	000000000	0000
				11/16"	0.187" to 0.192"	0.04"	4,100	Rockwell C43	ASME B18.8.2	—	50	000000000	0000
				3/4"	0.187" to 0.192"	0.04"	4,100	Rockwell C43	ASME B18.8.2	—	50	000000000	0000
				3/4"	0.187" to 0.192"	0.04"	4,400	Rockwell C43	—	MS16562-236	10	000000000	0000
				13/16"	0.187" to 0.192"	0.04"	4,100	Rockwell C43	ASME B18.8.2	—	50	000000000	00000
				7/8"	0.187" to 0.192"	0.04"	4,100	Rockwell C43	ASME B18.8.2	—	50	000000000	0000
				1"	0.187" to 0.192"	0.04"	4,100	Rockwell C43	ASME B18.8.2	—	50	000000000	00000


				1"	0.187" to 0.192"	0.04"	4,400	Rockwell C43	—	MS16562-238	10	000000000	0000
				1 1/8"	0.187" to 0.192"	0.04"	4,100	Rockwell C43	ASME B18.8.2	—	50	000000000	00000
				1 1/4"	0.187" to 0.192"	0.04"	4,100	Rockwell C43	ASME B18.8.2	—	50	000000000	00000
				1 1/4"	0.187" to 0.192"	0.04"	4,400	Rockwell C43	—	MS16562-239	10	000000000	0000
				1 3/8"	0.187" to 0.192"	0.04"	4,100	Rockwell C43	ASME B18.8.2	—	50	000000000	00000
				1 1/2"	0.187" to 0.192"	0.04"	4,100	Rockwell C43	ASME B18.8.2	—	25	000000000	0000
				1 5/8"	0.187" to 0.192"	0.04"	4,100	Rockwell C43	ASME B18.8.2	—	25	000000000	0000
				1 3/4"	0.187" to 0.192"	0.04"	4,100	Rockwell C43	ASME B18.8.2	—	25	000000000	0000
				1 7/8"	0.187" to 0.192"	0.04"	4,100	Rockwell C43	ASME B18.8.2	—	25	000000000	00000
				2"	0.187" to 0.192"	0.04"	4,100	Rockwell C43	ASME B18.8.2	—	25	000000000	0000


				2 1/4"	0.187" to 0.192"	0.04"	4,100	Rockwell C43	ASME B18.8.2	—	25	000000000	00000
				2 1/2"	0.187" to 0.192"	0.04"	4,100	Rockwell C43	ASME B18.8.2	—	25	000000000	00000
				2 3/4"	0.187" to 0.192"	0.04"	4,100	Rockwell C43	ASME B18.8.2	—	25	000000000	00000
				3"	0.187" to 0.192"	0.04"	4,100	Rockwell C43	ASME B18.8.2	—	10	000000000	0000




7/32" Diameter

1/2"	0.219" to 0.224"					0.048"	5,800	Rockwell C43	ASME B18.8.2	—	50	000000000	0000


5/8"	0.219" to 0.224"					0.048"	5,800	Rockwell C43	ASME B18.8.2	—	25	000000000	0000
3/4"	0.219" to 0.224"					0.048"	5,800	Rockwell C43	ASME B18.8.2	—	25	000000000	0000
1"	0.219" to 0.224"					0.048"	5,800	Rockwell C43	ASME B18.8.2	—	25	000000000	0000
1 1/4"	0.219" to 0.224"					0.048"	5,800	Rockwell C43	ASME B18.8.2	—	25	000000000	0000
1 1/2"	0.219" to 0.224"					0.048"	5,800	Rockwell C43	ASME B18.8.2	—	25	000000000	0000
1 3/4"	0.219" to 0.224"					0.048"	5,800	Rockwell C43	ASME B18.8.2	—	25	000000000	00000
2"	0.219" to 0.224"					0.048"	5,800	Rockwell C43	ASME B18.8.2	—	25	000000000	00000
2 1/4"	0.219" to 0.224"					0.048"	5,800	Rockwell C43	ASME B18.8.2	—	10	000000000	0000
2 1/2"	0.219" to 0.224"					0.048"	5,800	Rockwell C43	ASME B18.8.2	—	10	000000000	0000
2 3/4"	0.219" to 0.224"					0.048"	5,800	Rockwell C43	ASME B18.8.2	—	10	000000000	00000


3"	0.219" to 0.224"					0.048"	5,800	Rockwell C43	ASME B18.8.2	—	10	000000000	00000




						1/4" Diameter

						1/2"	0.25" to 0.256"	0.048"	7,000	Rockwell C43	ASME B18.8.2	—	100	000000000	00000


		9/16"	0.25" to 0.256"			0.048"	7,000	Rockwell C43	ASME B18.8.2	—	50	000000000	00000
		5/8"	0.25" to 0.256"			0.048"	7,000	Rockwell C43	ASME B18.8.2	—	50	000000000	00000
		11/16"	0.25" to 0.256"			0.048"	7,000	Rockwell C43	ASME B18.8.2	—	50	000000000	00000
		3/4"	0.25" to 0.256"			0.048"	7,000	Rockwell C43	ASME B18.8.2	—	50	000000000	00000
		3/4"	0.25" to 0.256"			0.048"	7,700	Rockwell C43	—	MS16562-250	5	000000000	0000
		7/8"	0.25" to 0.256"			0.048"	7,000	Rockwell C43	ASME B18.8.2	—	50	000000000	00000
		1"	0.25" to 0.256"			0.048"	7,000	Rockwell C43	ASME B18.8.2	—	25	000000000	0000
		1"	0.25" to 0.256"			0.048"	7,700	Rockwell C43	—	MS16562-252	5	000000000	00000
		1 1/8"	0.25" to 0.256"			0.048"	7,000	Rockwell C43	ASME B18.8.2	—	25	000000000	0000
		1 1/4"	0.25" to 0.256"			0.048"	7,000	Rockwell C43	ASME B18.8.2	—	25	000000000	00000


		1 3/8"	0.25" to 0.256"			0.048"	7,000	Rockwell C43	ASME B18.8.2	—	25	000000000	00000
		1 1/2"	0.25" to 0.256"			0.048"	7,000	Rockwell C43	ASME B18.8.2	—	25	000000000	00000
		1 1/2"	0.25" to 0.256"			0.048"	7,700	Rockwell C43	—	MS16562-254	5	000000000	0000
		1 5/8"	0.25" to 0.256"			0.048"	7,000	Rockwell C43	ASME B18.8.2	—	25	000000000	00000
		1 3/4"	0.25" to 0.256"			0.048"	7,000	Rockwell C43	ASME B18.8.2	—	10	000000000	0000
		1 7/8"	0.25" to 0.256"			0.048"	7,000	Rockwell C43	ASME B18.8.2	—	10	000000000	0000
		2"	0.25" to 0.256"			0.048"	7,000	Rockwell C43	ASME B18.8.2	—	10	000000000	0000
		2 1/4"	0.25" to 0.256"			0.048"	7,000	Rockwell C43	ASME B18.8.2	—	10	000000000	0000
		2 1/2"	0.25" to 0.256"			0.048"	7,000	Rockwell C43	ASME B18.8.2	—	10	000000000	0000
		2 3/4"	0.25" to 0.256"			0.048"	7,000	Rockwell C43	ASME B18.8.2	—	10	000000000	0000


		3"	0.25" to 0.256"			0.048"	7,000	Rockwell C43	ASME B18.8.2	—	10	000000000	00000
		3 1/4"	0.25" to 0.256"			0.048"	7,000	Rockwell C43	ASME B18.8.2	—	10	000000000	00000
		3 1/2"	0.25" to 0.256"			0.048"	7,000	Rockwell C43	ASME B18.8.2	—	10	000000000	00000
		4"	0.25" to 0.256"			0.048"	7,000	Rockwell C46	ASME B18.8.2	—	5	000000000	00000




						5/16" Diameter

						3/4"	0.312" to 0.318"	0.062"	10,800	Rockwell C43	ASME B18.8.2	—	25	000000000	00000


				1"	0.312" to 0.318"	0.062"	10,800	Rockwell C43	ASME B18.8.2	—	25	000000000	00000
				1 1/4"	0.312" to 0.318"	0.062"	10,800	Rockwell C43	ASME B18.8.2	—	25	000000000	00000
				1 1/2"	0.312" to 0.318"	0.062"	10,800	Rockwell C43	ASME B18.8.2	—	10	000000000	0000
				1 3/4"	0.312" to 0.318"	0.062"	10,800	Rockwell C43	ASME B18.8.2	—	10	000000000	0000
				2"	0.312" to 0.318"	0.062"	10,800	Rockwell C43	ASME B18.8.2	—	10	000000000	00000
				2 1/4"	0.312" to 0.318"	0.062"	10,800	Rockwell C43	ASME B18.8.2	—	10	000000000	00000
				2 1/2"	0.312" to 0.318"	0.062"	10,800	Rockwell C43	ASME B18.8.2	—	10	000000000	00000
				2 3/4"	0.312" to 0.318"	0.062"	10,800	Rockwell C43	ASME B18.8.2	—	10	000000000	00000
				3"	0.312" to 0.318"	0.062"	10,800	Rockwell C43	ASME B18.8.2	—	10	000000000	00000
				3 1/4"	0.312" to 0.318"	0.062"	10,800	Rockwell C43	ASME B18.8.2	—	5	000000000	00000


				3 1/2"	0.312" to 0.318"	0.062"	10,800	Rockwell C43	ASME B18.8.2	—	5	000000000	0000
				3 3/4"	0.312" to 0.318"	0.062"	10,800	Rockwell C43	ASME B18.8.2	—	5	000000000	00000
				4"	0.312" to 0.318"	0.062"	10,800	Rockwell C43	ASME B18.8.2	—	5	000000000	00000




						3/8" Diameter

3/4"	0.375" to 0.382"					0.077"	16,300	Rockwell C43	ASME B18.8.2	—	10	000000000	0000


1"	0.375" to 0.382"					0.077"	16,300	Rockwell C43	ASME B18.8.2	—	10	000000000	0000
1 1/4"	0.375" to 0.382"					0.077"	16,300	Rockwell C43	ASME B18.8.2	—	10	000000000	00000
1 1/2"	0.375" to 0.382"					0.077"	16,300	Rockwell C43	ASME B18.8.2	—	10	000000000	00000
1 3/4"	0.375" to 0.382"					0.077"	16,300	Rockwell C43	ASME B18.8.2	—	10	000000000	00000
2"	0.375" to 0.382"					0.077"	16,300	Rockwell C43	ASME B18.8.2	—	5	000000000	00000
2 1/4"	0.375" to 0.382"					0.077"	16,300	Rockwell C43	ASME B18.8.2	—	5	000000000	00000
2 1/2"	0.375" to 0.382"					0.077"	16,300	Rockwell C43	ASME B18.8.2	—	5	000000000	00000
2 3/4"	0.375" to 0.382"					0.077"	16,300	Rockwell C43	ASME B18.8.2	—	5	000000000	00000
3"	0.375" to 0.382"					0.077"	16,300	Rockwell C43	ASME B18.8.2	—	5	000000000	00000
3 1/4"	0.375" to 0.382"					0.077"	16,300	Rockwell C43	ASME B18.8.2	—	1	000000000	0000


3 1/2"	0.375" to 0.382"					0.077"	16,300	Rockwell C43	ASME B18.8.2	—	1	000000000	0000
3 3/4"	0.375" to 0.382"					0.077"	16,300	Rockwell C43	ASME B18.8.2	—	1	000000000	0000
4"	0.375" to 0.382"					0.077"	16,300	Rockwell C43	ASME B18.8.2	—	1	000000000	0000




						7/16" Diameter

						1 3/4"	0.437" to 0.445"	0.077"	19,800	Rockwell C43	ASME B18.8.2	—	5	000000000	00000


						2"	0.437" to 0.445"	0.077"	19,800	Rockwell C43	ASME B18.8.2	—	5	000000000	00000
						2 1/2"	0.437" to 0.445"	0.077"	19,800	Rockwell C43	ASME B18.8.2	—	5	000000000	00000
						3"	0.437" to 0.445"	0.077"	19,800	Rockwell C43	ASME B18.8.2	—	5	000000000	00000
						4"	0.437" to 0.445"	0.077"	19,800	Rockwell C43	ASME B18.8.2	—	1	000000000	0000




								1/2" Diameter

		1 1/4"	0.5" to 0.51"					0.094"	27,000	Rockwell C43	ASME B18.8.2	—	5	000000000	00000


		1 1/2"	0.5" to 0.51"					0.094"	27,000	Rockwell C43	ASME B18.8.2	—	5	000000000	00000
		1 3/4"	0.5" to 0.51"					0.094"	27,000	Rockwell C43	ASME B18.8.2	—	5	000000000	00000
		2"	0.5" to 0.51"					0.094"	25,500	Rockwell C43	—	MS16562-280	1	000000000	0000
		2"	0.5" to 0.51"					0.094"	27,000	Rockwell C43	ASME B18.8.2	—	1	000000000	0000
		2 1/4"	0.5" to 0.51"					0.094"	27,000	Rockwell C43	ASME B18.8.2	—	1	000000000	0000
		2 1/2"	0.5" to 0.51"					0.094"	27,000	Rockwell C43	ASME B18.8.2	—	1	000000000	0000
		2 3/4"	0.5" to 0.51"					0.094"	27,000	Rockwell C43	ASME B18.8.2	—	1	000000000	0000
		3"	0.5" to 0.51"					0.094"	25,500	Rockwell C43	—	MS16562-282	1	000000000	0000
		3"	0.5" to 0.51"					0.094"	27,000	Rockwell C43	ASME B18.8.2	—	1	000000000	0000
		3 1/4"	0.5" to 0.51"					0.094"	27,000	Rockwell C43	ASME B18.8.2	—	1	000000000	0000


		3 1/2"	0.5" to 0.51"					0.094"	27,000	Rockwell C43	ASME B18.8.2	—	1	000000000	0000
		3 3/4"	0.5" to 0.51"					0.094"	27,000	Rockwell C43	ASME B18.8.2	—	1	000000000	0000
		4"	0.5" to 0.51"					0.094"	27,000	Rockwell C43	ASME B18.8.2	—	1	000000000	0000

Coiled Spring Pins

End View

The best spring pins for joining parts exposed to vibration and shock. They're often used in power transmission, automation, and other assemblies with constant motion and sudden starts and stops. Because of their spiral shape, they flex to conform to holes that aren’t perfectly round.

	Lg.	For Hole Dia.	Double Shear Breaking Strength, lbf	Min. Hardness	Specs. Met	Pkg. Qty.		Pkg.
Corrosion-Resistant 18-8 Stainless Steel







				1/32" Diameter

				1/8"	0.031" to 0.032"	Not Rated	Not Rated	ASME B18.8.2	25	000000000	000000


				3/16"	0.031" to 0.032"	Not Rated	Not Rated	ASME B18.8.2	25	000000000	0000
				1/4"	0.031" to 0.032"	Not Rated	Not Rated	ASME B18.8.2	25	000000000	0000
				3/8"	0.031" to 0.032"	Not Rated	Not Rated	ASME B18.8.2	25	000000000	0000
				1/2"	0.031" to 0.032"	Not Rated	Not Rated	ASME B18.8.2	25	000000000	0000
				5/8"	0.031" to 0.032"	Not Rated	Not Rated	ASME B18.8.2	25	000000000	00000




						0.039" Diameter

						3/16"	0.039" to 0.040"	Not Rated	Rockwell C46	ASME B18.8.2	25	000000000	00000


						1/4"	0.039" to 0.040"	Not Rated	Rockwell C46	ASME B18.8.2	25	000000000	00000
						3/8"	0.039" to 0.040"	Not Rated	Rockwell C46	ASME B18.8.2	25	000000000	00000
						1/2"	0.039" to 0.040"	Not Rated	Rockwell C46	ASME B18.8.2	25	000000000	00000




								3/64" Diameter

								1/8"	0.047" to 0.048"	Not Rated	Not Rated	ASME B18.8.2	25	000000000	0000


								3/16"	0.047" to 0.048"	Not Rated	Not Rated	ASME B18.8.2	25	000000000	0000
								1/4"	0.047" to 0.048"	Not Rated	Not Rated	ASME B18.8.2	25	000000000	0000
								3/8"	0.047" to 0.048"	Not Rated	Not Rated	ASME B18.8.2	25	000000000	0000
								1/2"	0.047" to 0.048"	Not Rated	Not Rated	ASME B18.8.2	25	000000000	0000
								5/8"	0.047" to 0.048"	Not Rated	Not Rated	ASME B18.8.2	25	000000000	0000




										0.052" Diameter

										1/8"	0.051" to 0.053"	190	Not Rated	ASME B18.8.2	25	000000000	0000


										1/4"	0.051" to 0.053"	190	Not Rated	ASME B18.8.2	25	000000000	00000
										3/8"	0.051" to 0.053"	190	Not Rated	ASME B18.8.2	25	000000000	00000
										1/2"	0.051" to 0.053"	190	Not Rated	ASME B18.8.2	25	000000000	00000




												1/16" Diameter

												3/16"	0.062" to 0.065"	265	Not Rated	ASME B18.8.2	50	000000000	00000


1/4"												0.062" to 0.065"	265	Not Rated	ASME B18.8.2	50	000000000	00000
5/16"	0.061" to 0.065"											265	Not Rated	ASME B18.8.2	50	000000000	00000
3/8"	0.062" to 0.065"											330	Not Rated	ASME B18.8.2	50	000000000	00000
7/16"	0.062" to 0.065"											265	Not Rated	ASME B18.8.2	50	000000000	00000
1/2"	0.061" to 0.065"											265	Not Rated	ASME B18.8.2	50	000000000	00000
5/8"	0.062" to 0.065"	265										Not Rated	ASME B18.8.2	50	000000000	00000
3/4"	0.062" to 0.065"	265	Not Rated									ASME B18.8.2	50	000000000	00000




		3/32" Diameter

		1/4"	0.094" to 0.097"									600	Not Rated	ASME B18.8.2	25	000000000	0000


		5/16"	0.094" to 0.097"									600	Not Rated	ASME B18.8.2	25	000000000	0000
		3/8"	0.094" to 0.097"									600	Not Rated	ASME B18.8.2	25	000000000	0000
		7/16"	0.094" to 0.097"									600	Not Rated	ASME B18.8.2	25	000000000	0000
		1/2"	0.094" to 0.097"									600	Not Rated	ASME B18.8.2	25	000000000	0000
		5/8"	0.094" to 0.097"	600								Not Rated	ASME B18.8.2	25	000000000	0000
		3/4"	0.094" to 0.097"	600	Not Rated							ASME B18.8.2	25	000000000	0000
		1"	0.094" to 0.097"	600	Not Rated							ASME B18.8.2	25	000000000	0000




				7/64" Diameter

				1/4"	0.108" to 0.112"							800	Not Rated	ASME B18.8.2	25	000000000	00000


				1/2"	0.108" to 0.112"							800	Not Rated	ASME B18.8.2	25	000000000	0000
				3/4"	0.109" to 0.112"	800						Not Rated	ASME B18.8.2	25	000000000	00000
				1"	0.109" to 0.112"	800	Not Rated					ASME B18.8.2	25	000000000	00000




						1/8" Diameter

						1/4"	0.125" to 0.129"					1,100	Not Rated	ASME B18.8.2	25	000000000	00000


						5/16"	0.125" to 0.129"					1,100	Not Rated	ASME B18.8.2	25	000000000	00000
						3/8"	0.124" to 0.129"					1,100	Not Rated	ASME B18.8.2	25	000000000	00000
						7/16"	0.125" to 0.129"					1,100	Not Rated	ASME B18.8.2	25	000000000	00000
						1/2"	0.124" to 0.129"					1,100	Not Rated	ASME B18.8.2	25	000000000	00000
						9/16"	0.124" to 0.129"	1,100				Not Rated	ASME B18.8.2	25	000000000	0000
						5/8"	0.125" to 0.129"	1,100	Not Rated			ASME B18.8.2	25	000000000	00000
						3/4"	0.124" to 0.129"	1,100	Not Rated			ASME B18.8.2	25	000000000	00000
						7/8"	0.125" to 0.129"	1,100	Not Rated			ASME B18.8.2	25	000000000	00000
						15/16"	0.124" to 0.129"	1,100	Not Rated			ASME B18.8.2	10	000000000	0000
						1"	0.125" to 0.129"	1,100	Not Rated			ASME B18.8.2	10	000000000	0000


						1 1/4"	0.125" to 0.129"	1,100	Not Rated			ASME B18.8.2	10	000000000	0000
						1 1/2"	0.125" to 0.129"	1,100	Not Rated			ASME B18.8.2	10	000000000	00000




								3/16" Diameter

								1/2"	0.187" to 0.192"	2,400	Not Rated	ASME B18.8.2	10	000000000	0000


								5/8"	0.187" to 0.192"	2,400	Not Rated	ASME B18.8.2	10	000000000	0000
								3/4"	0.187" to 0.192"	2,400	Not Rated	ASME B18.8.2	10	000000000	00000
								7/8"	0.187" to 0.192"	2,400	Not Rated	ASME B18.8.2	10	000000000	00000
								1"	0.187" to 0.192"	2,400	Not Rated	ASME B18.8.2	10	000000000	00000
								1 1/4"	0.187" to 0.192"	2,400	Not Rated	ASME B18.8.2	10	000000000	00000
								1 1/2"	0.187" to 0.192"	2,400	Not Rated	ASME B18.8.2	10	000000000	00000
2"								0.187" to 0.192"	2,400	Not Rated	ASME B18.8.2	10	000000000	00000




								1/4" Diameter

								3/4"	0.250" to 0.256"	4,300	Not Rated	ASME B18.8.2	5	000000000	00000


								1"	0.247" to 0.256"	4,300	Not Rated	ASME B18.8.2	5	000000000	00000
								1 1/4"	0.250" to 0.256"	4,300	Not Rated	ASME B18.8.2	5	000000000	00000
								1 1/2"	0.247" to 0.256"	4,300	Not Rated	ASME B18.8.2	5	000000000	00000
								1 3/4"	0.250" to 0.256"	4,300	Not Rated	ASME B18.8.2	5	000000000	0000
								2"	0.247" to 0.256"	4,300	Not Rated	ASME B18.8.2	5	000000000	00000




								1 mm Diameter

								4 mm	1.000 mm to 1.040 mm	100	Not Rated	DIN 7343, ISO 8750	50	000000000	00000


								6 mm	1.000 mm to 1.040 mm	100	Not Rated	DIN 7343, ISO 8750	50	000000000	00000
								10 mm	1.000 mm to 1.040 mm	100	Not Rated	DIN 7343, ISO 8750	50	000000000	00000




								1.5 mm Diameter

								6 mm	1.500 mm to 1.600 mm	200	Not Rated	ASME B18.8.3M, DIN 7343, ISO 8750	25	000000000	0000


								8 mm	1.500 mm to 1.600 mm	200	Not Rated	ASME B18.8.3M, DIN 7343, ISO 8750	25	000000000	0000
								10 mm	1.500 mm to 1.600 mm	200	Not Rated	ASME B18.8.3M, DIN 7343, ISO 8750	25	000000000	0000
								12 mm	1.500 mm to 1.600 mm	200	Not Rated	ASME B18.8.3M, DIN 7343, ISO 8750	25	000000000	0000




										2 mm Diameter

										6 mm	2.000 mm to 2.100 mm	400	Not Rated	ASME B18.8.3M, DIN 7343, ISO 8750	50	000000000	00000


										8 mm	2.000 mm to 2.100 mm	400	Not Rated	DIN 7343, ISO 8750	50	000000000	00000
										10 mm	2.000 mm to 2.100 mm	400	Not Rated	DIN 7343, ISO 8750	25	000000000	00000
										12 mm	2.000 mm to 2.100 mm	400	Not Rated	DIN 7343, ISO 8750	25	000000000	0000
										18 mm	2.000 mm to 2.100 mm	400	Not Rated	DIN 7343, ISO 8750	25	000000000	00000




										2.5 mm Diameter

										8 mm	2.500 mm to 2.600 mm	650	Not Rated	DIN 7343, ISO 8750	25	000000000	00000


										10 mm	2.500 mm to 2.600 mm	650	Not Rated	ASME B18.8.3M, DIN 7343, ISO 8750	25	000000000	00000
										12 mm	2.500 mm to 2.600 mm	650	Not Rated	DIN 7343, ISO 8750	25	000000000	00000
										14 mm	2.500 mm to 2.600 mm	650	Not Rated	ASME B18.8.3M, DIN 7343, ISO 8750	25	000000000	00000
										16 mm	2.500 mm to 2.600 mm	650	Not Rated	DIN 7343, ISO 8750	25	000000000	00000
										20 mm	2.500 mm to 2.600 mm	650	Not Rated	DIN 7343, ISO 8750	10	000000000	0000




										3 mm Diameter

										8 mm	3.000 mm to 3.100 mm	900	Not Rated	DIN 7343, ISO 8750	25	000000000	00000


										10 mm	3.000 mm to 3.100 mm	900	Not Rated	DIN 7343, ISO 8750	25	000000000	00000
										12 mm	3.000 mm to 3.100 mm	900	Not Rated	DIN 7343, ISO 8750	25	000000000	00000
										14 mm	3.000 mm to 3.100 mm	900	Not Rated	DIN 7343, ISO 8750	25	000000000	00000
										16 mm	3.000 mm to 3.100 mm	900	Not Rated	DIN 7343, ISO 8750	25	000000000	00000
										18 mm	3.000 mm to 3.100 mm	900	Not Rated	DIN 7343, ISO 8750	25	000000000	00000
										20 mm	3.000 mm to 3.100 mm	900	Not Rated	DIN 7343, ISO 8750	25	000000000	00000
										30 mm	3.000 mm to 3.100 mm	900	Not Rated	DIN 7343, ISO 8750	10	000000000	00000




										4 mm Diameter

										12 mm	4.000 mm to 4.100 mm	1,700	Not Rated	DIN 7343, ISO 8750	10	000000000	0000


										14 mm	4.000 mm to 4.100 mm	1,700	Not Rated	DIN 7343, ISO 8750	10	000000000	00000
										18 mm	4.200 mm to 4.400 mm	1,700	Not Rated	ASME B18.8.3M, DIN 7343, ISO 8750	10	000000000	0000
				20 mm						4.000 mm to 4.100 mm	1,700	Not Rated	ASME B18.8.3M, DIN 7343, ISO 8750	10	000000000	0000
				24 mm	4.000 mm to 4.100 mm					1,700	Not Rated	DIN 7343, ISO 8750	10	000000000	00000
				30 mm	4.000 mm to 4.100 mm					1,700	Not Rated	ASME B18.8.3M, DIN 7343, ISO 8750	10	000000000	00000
				35 mm	4.000 mm to 4.100 mm					1,700	Not Rated	DIN 7343, ISO 8750	10	000000000	00000




										5 mm Diameter

										12 mm	5.000 mm to 5.100 mm	2,500	Not Rated	DIN 7343, ISO 8750	10	000000000	0000


								20 mm	5.000 mm to 5.100 mm	2,500	Not Rated	DIN 7343, ISO 8750	10	000000000	00000
								30 mm	5.000 mm to 5.100 mm	2,500	Not Rated	DIN 7343, ISO 8750	5	000000000	00000
								35 mm	5.000 mm to 5.100 mm	2,500	Not Rated	DIN 7343, ISO 8750	5	000000000	00000
								40 mm	5.000 mm to 5.100 mm	2,500	Not Rated	DIN 7343, ISO 8750	5	000000000	00000




										6 mm Diameter

										16 mm	6.000 mm to 6.100 mm	3,700	Not Rated	DIN 7343, ISO 8750	5	000000000	0000


						20 mm	6.000 mm to 6.100 mm			3,700	Not Rated	DIN 7343, ISO 8750	5	000000000	0000
						24 mm	6.000 mm to 6.100 mm			3,700	Not Rated	DIN 7343, ISO 8750	5	000000000	00000
						30 mm	6.000 mm to 6.100 mm			3,700	Not Rated	DIN 7343, ISO 8750	5	000000000	00000
						35 mm	6.000 mm to 6.100 mm			3,700	Not Rated	DIN 7343, ISO 8750	5	000000000	00000
						40 mm	6.000 mm to 6.100 mm			3,700	Not Rated	DIN 7343, ISO 8750	5	000000000	00000


						Wear-Resistant 400 Series Stainless Steel







										1/32" Diameter

										1/8"	0.031" to 0.032"	90	Rockwell C46	ASME B18.8.2	50	000000000	00000


										3/16"	0.031" to 0.032"	90	Rockwell C46	ASME B18.8.2	50	000000000	00000
										1/4"	0.031" to 0.032"	90	Rockwell C46	ASME B18.8.2	50	000000000	00000
										3/8"	0.031" to 0.032"	90	Rockwell C46	ASME B18.8.2	50	000000000	00000
										1/2"	0.031" to 0.032"	90	Rockwell C46	ASME B18.8.2	50	000000000	00000




												0.039" Diameter

		1/4"	0.039" to 0.040"									135	Rockwell C46	ASME B18.8.2	25	000000000	00000


		3/8"	0.039" to 0.040"									135	Rockwell C46	ASME B18.8.2	25	000000000	00000
		1/2"	0.039" to 0.040"									135	Rockwell C46	ASME B18.8.2	25	000000000	00000




												3/64" Diameter

												1/8"	0.047" to 0.048"	190	Rockwell C46	ASME B18.8.2	50	000000000	00000


				3/16"								0.047" to 0.048"	190	Rockwell C46	ASME B18.8.2	50	000000000	0000
				1/4"	0.047" to 0.048"							190	Rockwell C46	ASME B18.8.2	50	000000000	00000
				3/8"	0.047" to 0.048"							190	Rockwell C46	ASME B18.8.2	50	000000000	00000
				1/2"	0.047" to 0.048"							190	Rockwell C46	ASME B18.8.2	50	000000000	00000
				5/8"	0.047" to 0.048"							190	Rockwell C46	ASME B18.8.2	25	000000000	0000




												0.052" Diameter

												1/4"	0.051" to 0.053"	250	Rockwell C46	ASME B18.8.2	25	000000000	00000


								3/8"				0.051" to 0.053"	250	Rockwell C46	ASME B18.8.2	25	000000000	00000
								1/2"	0.051" to 0.053"			250	Rockwell C46	ASME B18.8.2	25	000000000	00000




												1/16" Diameter

												3/16"	0.061" to 0.065"	330	Rockwell C46	ASME B18.8.2	50	000000000	0000


												1/4"	0.061" to 0.065"	330	Rockwell C46	ASME B18.8.2	50	000000000	00000
												5/16"	0.061" to 0.065"	330	Rockwell C46	ASME B18.8.2	50	000000000	00000
												3/8"	0.061" to 0.065"	330	Rockwell C46	ASME B18.8.2	50	000000000	0000
						7/16"						0.061" to 0.065"	330	Rockwell C46	ASME B18.8.2	50	000000000	00000
						1/2"	0.061" to 0.065"					330	Rockwell C46	ASME B18.8.2	50	000000000	00000
						9/16"	0.061" to 0.065"					330	Rockwell C46	ASME B18.8.2	50	000000000	00000
						5/8"	0.061" to 0.065"					330	Rockwell C46	ASME B18.8.2	50	000000000	00000
						3/4"	0.061" to 0.065"					330	Rockwell C46	ASME B18.8.2	50	000000000	00000
1"						0.061" to 0.065"	330					Rockwell C46	ASME B18.8.2	50	000000000	00000




						5/64" Diameter

						5/16"	0.077" to 0.081"					550	Rockwell C46	ASME B18.8.2	50	000000000	00000


						3/8"	0.077" to 0.081"					550	Rockwell C46	ASME B18.8.2	50	000000000	00000
						1/2"	0.077" to 0.081"					550	Rockwell C46	ASME B18.8.2	50	000000000	00000
						5/8"	0.077" to 0.081"					550	Rockwell C46	ASME B18.8.2	50	000000000	00000
						3/4"	0.077" to 0.081"					550	Rockwell C46	ASME B18.8.2	50	000000000	00000
						1"	0.077" to 0.081"			550		Rockwell C46	ASME B18.8.2	50	000000000	00000




										3/32" Diameter

										1/4"	0.093" to 0.097"	750	Rockwell C46	ASME B18.8.2	50	000000000	00000


		3/8"								0.093" to 0.097"	750	Rockwell C46	ASME B18.8.2	50	000000000	00000
		1/2"	0.093" to 0.097"							750	Rockwell C46	ASME B18.8.2	50	000000000	00000
		5/8"	0.093" to 0.097"							750	Rockwell C46	ASME B18.8.2	50	000000000	00000
		3/4"	0.093" to 0.097"							750	Rockwell C46	ASME B18.8.2	50	000000000	00000
		1"	0.093" to 0.097"							750	Rockwell C46	ASME B18.8.2	50	000000000	00000
		1 1/2"	0.093" to 0.097"							750	Rockwell C46	ASME B18.8.2	50	000000000	00000




										7/64" Diameter

										1/2"	0.108" to 0.112"	1,000	Rockwell C46	ASME B18.8.2	25	000000000	00000


				3/4"	0.108" to 0.112"					1,000	Rockwell C46	ASME B18.8.2	10	000000000	0000
				1"	0.108" to 0.112"					1,000	Rockwell C46	ASME B18.8.2	10	000000000	0000




										1/8" Diameter

										3/8"	0.124" to 0.129"	1,400	Rockwell C46	ASME B18.8.2	50	000000000	00000


								7/16"		0.124" to 0.129"	1,400	Rockwell C46	ASME B18.8.2	50	000000000	00000
								1/2"	0.124" to 0.129"	1,400	Rockwell C46	ASME B18.8.2	50	000000000	00000
								5/8"	0.124" to 0.129"	1,400	Rockwell C46	ASME B18.8.2	50	000000000	00000
								3/4"	0.124" to 0.129"	1,400	Rockwell C46	ASME B18.8.2	50	000000000	00000
								7/8"	0.124" to 0.129"	1,400	Rockwell C46	ASME B18.8.2	25	000000000	0000
								1"	0.124" to 0.129"	1,400	Rockwell C46	ASME B18.8.2	25	000000000	0000
								1 1/4"	0.124" to 0.129"	1,400	Rockwell C46	ASME B18.8.2	25	000000000	00000
								1 1/2"	0.124" to 0.129"	1,400	Rockwell C46	ASME B18.8.2	25	000000000	00000
								2"	0.124" to 0.129"	1,400	Rockwell C46	ASME B18.8.2	25	000000000	00000




										5/32" Diameter

										1/2"	0.155" to 0.160"	2,200	Rockwell C46	ASME B18.8.2	25	000000000	0000


3/4"	0.155" to 0.160"									2,200	Rockwell C46	ASME B18.8.2	25	000000000	00000
1"	0.155" to 0.160"									2,200	Rockwell C46	ASME B18.8.2	25	000000000	00000
1 1/2"	0.155" to 0.160"									2,200	Rockwell C46	ASME B18.8.2	25	000000000	00000
2"	0.155" to 0.160"									2,200	Rockwell C46	ASME B18.8.2	10	000000000	0000




										3/16" Diameter

										1/2"	0.185" to 0.192"	3,100	Rockwell C46	ASME B18.8.2	25	000000000	00000


						5/8"				0.185" to 0.192"	3,100	Rockwell C46	ASME B18.8.2	10	000000000	0000
						3/4"	0.185" to 0.192"			3,100	Rockwell C46	ASME B18.8.2	10	000000000	0000
						7/8"	0.185" to 0.192"			3,100	Rockwell C46	ASME B18.8.2	10	000000000	00000
						1"	0.185" to 0.192"			3,100	Rockwell C46	ASME B18.8.2	10	000000000	0000
						1 1/8"	0.185" to 0.192"			3,100	Rockwell C46	ASME B18.8.2	10	000000000	0000
						1 1/4"	0.185" to 0.192"			3,100	Rockwell C46	ASME B18.8.2	10	000000000	0000
						1 3/8"	0.185" to 0.192"			3,100	Rockwell C46	ASME B18.8.2	10	000000000	0000
						1 1/2"	0.185" to 0.192"			3,100	Rockwell C46	ASME B18.8.2	10	000000000	0000
						1 3/4"	0.185" to 0.192"			3,100	Rockwell C46	ASME B18.8.2	10	000000000	0000
						2"	0.185" to 0.192"			3,100	Rockwell C46	ASME B18.8.2	10	000000000	00000




										7/32" Diameter

		3/4"	0.217" to 0.224"							4,200	Rockwell C46	ASME B18.8.2	25	000000000	00000


		1"	0.217" to 0.224"							4,200	Rockwell C46	ASME B18.8.2	10	000000000	0000
		1 1/2"	0.217" to 0.224"							4,200	Rockwell C46	ASME B18.8.2	10	000000000	00000
		2"	0.217" to 0.224"							4,200	Rockwell C46	ASME B18.8.2	10	000000000	00000




				1/4" Diameter

				1/2"	0.247" to 0.256"					5,500	Rockwell C46	ASME B18.8.2	10	000000000	00000


				3/4"	0.247" to 0.256"					5,500	Rockwell C46	ASME B18.8.2	10	000000000	00000
				1"	0.247" to 0.256"					5,500	Rockwell C46	ASME B18.8.2	10	000000000	00000
				1 1/8"	0.247" to 0.256"					5,500	Rockwell C46	ASME B18.8.2	10	000000000	00000
				1 1/4"	0.247" to 0.256"					5,500	Rockwell C46	ASME B18.8.2	10	000000000	00000
				1 3/8"	0.247" to 0.256"					5,500	Rockwell C46	ASME B18.8.2	5	000000000	0000
				1 1/2"	0.247" to 0.256"					5,500	Rockwell C46	ASME B18.8.2	5	000000000	0000
				1 3/4"	0.247" to 0.256"					5,500	Rockwell C46	ASME B18.8.2	5	000000000	0000
				2"	0.247" to 0.256"					5,500	Rockwell C46	ASME B18.8.2	5	000000000	0000
				2 1/4"	0.247" to 0.256"					5,500	Rockwell C46	ASME B18.8.2	5	000000000	0000
				2 1/2"	0.247" to 0.256"					5,500	Rockwell C46	ASME B18.8.2	5	000000000	0000


				3"	0.247" to 0.256"					5,500	Rockwell C46	ASME B18.8.2	1	000000000	0000




								5/16" Diameter

								3/4"	0.308" to 0.319"	12,000	Rockwell C46	ASME B18.8.2	10	000000000	00000


								1"	0.308" to 0.319"	8,700	Rockwell C46	ASME B18.8.2	10	000000000	00000
								1 1/2"	0.308" to 0.319"	8,700	Rockwell C46	ASME B18.8.2	5	000000000	00000
								2"	0.308" to 0.319"	8,700	Rockwell C46	ASME B18.8.2	5	000000000	00000
								2 1/2"	0.308" to 0.319"	8,700	Rockwell C46	ASME B18.8.2	1	000000000	0000
2 3/4"								0.308" to 0.319"	8,700	Rockwell C46	ASME B18.8.2	1	000000000	0000




								3/8" Diameter

								1"	0.370" to 0.383"	12,600	Rockwell C46	ASME B18.8.2	1	000000000	0000


								1 1/4"	0.370" to 0.383"	12,600	Rockwell C46	ASME B18.8.2	1	000000000	0000
								1 1/2"	0.370" to 0.383"	12,600	Rockwell C46	ASME B18.8.2	1	000000000	0000

Heavy Duty Coiled Spring Pins


	End View

Made of thicker material than our other coiled spring pins, these are about 30% stronger with the same resilience to vibration and shock. They are often used in power transmission, automation, and other assemblies with constant motion and sudden starts and stops. Because of their spiral shape, pins flex to conform to holes that aren’t perfectly round.

	Lg.	For Hole Dia.	Double Shear Breaking Strength, lbf	Min. Hardness	Specs. Met	Pkg. Qty.		Pkg.
Wear-Resistant 400 Series Stainless Steel







				3/32" Diameter

				1/4"	0.093" to 0.097"	1,100	Rockwell C46	ASME B18.8.2	50	000000000	000000


				3/8"	0.093" to 0.097"	1,100	Rockwell C46	ASME B18.8.2	50	000000000	00000
				1/2"	0.093" to 0.097"	1,100	Rockwell C46	ASME B18.8.2	50	000000000	00000
				5/8"	0.093" to 0.097"	1,100	Rockwell C46	ASME B18.8.2	25	000000000	0000
				3/4"	0.093" to 0.097"	1,100	Rockwell C46	ASME B18.8.2	25	000000000	0000
				1"	0.093" to 0.097"	1,100	Rockwell C46	ASME B18.8.2	25	000000000	00000
				1 1/2"	0.093" to 0.097"	1,100	Rockwell C46	ASME B18.8.2	25	000000000	00000




						1/8" Diameter

						3/8"	0.124" to 0.129"	2,000	Rockwell C46	ASME B18.8.2	25	000000000	00000


						7/16"	0.124" to 0.129"	2,000	Rockwell C46	ASME B18.8.2	25	000000000	00000
						1/2"	0.124" to 0.129"	2,000	Rockwell C46	ASME B18.8.2	25	000000000	00000
						5/8"	0.124" to 0.129"	2,000	Rockwell C46	ASME B18.8.2	25	000000000	00000
						3/4"	0.124" to 0.129"	2,000	Rockwell C46	ASME B18.8.2	25	000000000	00000
						7/8"	0.124" to 0.129"	2,000	Rockwell C46	ASME B18.8.2	25	000000000	00000
						1"	0.124" to 0.129"	2,000	Rockwell C46	ASME B18.8.2	25	000000000	00000
						1 1/4"	0.124" to 0.129"	2,000	Rockwell C46	ASME B18.8.2	25	000000000	00000
						1 1/2"	0.124" to 0.129"	2,000	Rockwell C46	ASME B18.8.2	10	000000000	0000
						2"	0.124" to 0.129"	2,000	Rockwell C46	ASME B18.8.2	10	000000000	00000




								3/16" Diameter

								3/8"	0.187" to 0.192"	4,500	Rockwell C46	ASME B18.8.2	25	000000000	00000


								1/2"	0.185" to 0.192"	4,500	Rockwell C46	ASME B18.8.2	10	000000000	0000
								3/4"	0.185" to 0.192"	4,500	Rockwell C46	ASME B18.8.2	10	000000000	0000
								1"	0.185" to 0.192"	4,500	Rockwell C46	ASME B18.8.2	10	000000000	00000
								1 1/4"	0.185" to 0.192"	4,500	Rockwell C46	ASME B18.8.2	5	000000000	00000
								1 1/2"	0.185" to 0.192"	4,500	Rockwell C46	ASME B18.8.2	5	000000000	0000
								1 3/4"	0.185" to 0.192"	4,500	Rockwell C46	ASME B18.8.2	5	000000000	0000
								2"	0.185" to 0.192"	4,500	Rockwell C46	ASME B18.8.2	5	000000000	0000
								2 1/2"	0.185" to 0.192"	4,500	Rockwell C46	ASME B18.8.2	5	000000000	00000




										1/4" Diameter

										1/2"	0.247" to 0.256"	7,800	Rockwell C46	ASME B18.8.2	5	000000000	0000


										3/4"	0.247" to 0.256"	7,800	Rockwell C46	ASME B18.8.2	5	000000000	00000
										1"	0.247" to 0.256"	7,800	Rockwell C46	ASME B18.8.2	5	000000000	00000
1 1/8"										0.247" to 0.256"	7,800	Rockwell C46	ASME B18.8.2	5	000000000	0000
1 1/4"	0.247" to 0.256"									7,800	Rockwell C46	ASME B18.8.2	5	000000000	00000
1 3/8"	0.247" to 0.256"									7,800	Rockwell C46	ASME B18.8.2	5	000000000	00000
1 1/2"	0.247" to 0.256"									7,800	Rockwell C46	ASME B18.8.2	5	000000000	00000
1 3/4"	0.25" to 0.256"									7,800	Rockwell C46	ASME B18.8.2	5	000000000	00000
2"	0.247" to 0.256"	7,800								Rockwell C46	ASME B18.8.2	5	000000000	00000
2 1/2"	0.247" to 0.256"	7,800	Rockwell C46							ASME B18.8.2	5	000000000	00000

Slotted Spring Pin Assortments

Keep a range of sizes on hand to secure a variety of parts. Squeeze these pins into holes and they expand slightly, creating tension to stay in place. An alternative to dowel pins, they're lighter in weight with a hollow center and don’t need a precise hole. Also known as roll pins.

	No. of Pieces	Container Type	Specs. Met		Each
Corrosion-Resistant 18-8 Stainless Steel



	1/16" to 3/8" Dia.	300	Plastic Box	—	000000000	0000000


	1/16" to 7/16" Dia.	500	Plastic Box	—	000000000	000000
	1/16" to 7/16" Dia.	750	Plastic Box	—	000000000	000000
	2 mm to 6 mm Dia.	520	Plastic Box	ISO 8752	000000000	000000


	Wear-Resistant 400 Series Stainless Steel



			1/16" to 3/8" Dia.	300	Plastic Box	—	000000000	000000


			1/16" to 7/16" Dia.	500	Plastic Box	—	000000000	000000
			1/16" to 7/16" Dia.	750	Plastic Box	—	000000000	000000
			1/8" to 3/8" Dia.	25	Plastic Box	—	000000000	00000
			1/8" to 3/8" Dia.	68	Plastic Box	—	000000000	00000

Coiled Spring Pin Assortments

The best spring pins for shock and vibration, these assortments secure a variety of parts. They're often used in power transmission, automation, and other assemblies with constant motion and sudden starts and stops. Pins have a spiral shape that flexes to conform to holes that aren’t perfectly round.

	No. of Pieces	Container Type		Each
Corrosion-Resistant 18-8 Stainless Steel



	1/16" to 3/16" Dia.	240	Plastic Box	000000000	0000000


	1.5 mm to 8 mm Dia.	230	Plastic Box	000000000	000000


	Wear-Resistant 400 Series Stainless Steel



			1/16" to 7/32" Dia.	230	Plastic Box	000000000	000000