How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Low-Pressure Press-Connect Steel Unthreaded Pipe Fittings
- For Use On:
EPDM Rubber O-Ring: Ethylene Glycol, Propylene Glycol, Water
Buna-N Rubber O-Ring: Air, Lubricants, Propane, Fuel Oil, Natural Gas, Diesel Fuel - Specifications Met:
EPDM Rubber O-Ring: ASME B31,1, ASME B31.3, ASME B31.9, FM 1920, UL 213
Buna-N Rubber O-Ring: ASME B31.1, ASME B31.3, ASME B31.9, ANSI LC4/CSA 6.32, International Fuel Gas Code - Maximum Pressure:
EPDM Rubber O-Ring: 200 psi @ 72° F
Buna-N Rubber O-Ring: 125 psi @ 72° F - Pipe Nipples and Pipe: Use Schedule 40 Steel
- Flanges: Use Class 150 Steel
Crimp these fittings onto steel pipe to form a tightly sealed connection that’s faster than threading or welding and doesn’t require heat. An internal gripping ring and rubber O-ring create a secure seal when crimped. They are designed to leak if fittings have not been crimped; a colored dot marks the leak path so it's easy to spot unsealed connections. These steel fittings are coated in zinc-nickel to resist corrosion, but will rust if frequently exposed to saltwater or harsh chemicals. They are comparable to Viega MegaPress steel fittings.
Fittings meet ASME B31 code requirements for use in pressure piping systems.
Fittings with an EPDM rubber O-ring are often used for water processing lines, fire sprinklers, and heating and cooling systems. EPDM rubber won’t degrade when exposed to water, ethylene glycol, and propylene glycol. These fittings meet UL 213 and FM 1920 standards for use in fire protection systems.
Buna-N rubber O-rings hold up to natural gas, propane, diesel fuel, lubricants, and other oils. Fittings with these O-rings are often used in fuel gas systems and air lines. They meet the ANSI LC4/CSA 6.32 standard for fuel gas systems and comply with the International Fuel Gas Code.
For technical drawings and 3-D models, click on a part number.
Crimping tools seal fittings in less than five seconds. These tools are cordless, so you can take them to any job. Connect the jaw or ring that matches your pipe size to these tools, then pull the trigger to crimp the fitting. The pivoting head lets you access connections from any angle.
Battery | |||||||
|---|---|---|---|---|---|---|---|
Voltage | No. Included | Cap., amp-hrs. | Battery Charger Included | Battery Charging Time, min. | Compatible With | Each | |
| 18V DC | 2 | 3 | Yes | 39 | Viega MegaPress Viega ProPress Viega ProPress XL-C | 00000000 | 000000000 |
Jaw and ring sets include three jaws, three rings, and one ring actuator jaw. Jaws are for pipe sizes 1/2 to 1; they fit directly into the crimping tool. Rings are for pipe sizes 1 1/4 to 2; clip the ring around the fitting and use the ring actuator jaw and crimping tool to press the open ends together.
For Pipe | ||||||||
|---|---|---|---|---|---|---|---|---|
| Size | Material | For Manufacturer | For Manufacturer Model No. | Compatible With | Includes | Container Type | Each | |
| 1/2, 3/4, 1, 1 1/4, 1 1/2, 2 | Stainless Steel, Steel | Ridgid | RP 340 | Viega MegaPress | One Ring Actuator Jaw Three Jaws (1/2-1 Pipe Size) Three Rings (1 1/4-2 Pipe Size) | Carrying Case | 00000000 | 000000000 |
Low-Pressure Press-Connect Stainless Steel Unthreaded Pipe Fittings
- For Use With: Air, Ethylene Glycol, Propylene Glycol, Water, Diesel Fuel, Fuel Oil
- Maximum Pressure: 125 psi @ 72° F
- Specifications Met: ASME B31.1, ASME B31.3, ASME B31.9
- O-Ring Material: Fluoroelastomer Rubber
- Pipe Nipples and Pipe: Use Schedule 10, 40 Stainless Steel
- Flanges: Use Class 150 Stainless Steel
Press these fittings onto stainless steel pipe using a crimping tool for a permanent, leak-tight connection that's faster than threading or welding and doesn't require heat. Fittings have an internal stainless steel gripping ring and rubber O-ring that create a seal when crimped. They are designed to leak if fittings have not been crimped; a colored dot marks the leak path so it's easy to spot unsealed connections. All of these fittings are made of 304 stainless steel to resist corrosion from frequent exposure to water and fuels. They’re often used for water processing lines, heating and cooling systems, and fuel lines. They are comparable to Viega MegaPress fittings.
Fittings meet ANSI/ASME B31 code requirements for use in pressure piping systems.
For technical drawings and 3-D models, click on a part number.
Crimping tools seal fittings in less than five seconds. These tools are cordless, so you can take them to any job. Connect the jaw or ring that matches your pipe size to these tools, then pull the trigger to crimp the fitting. The pivoting head lets you access connections from any angle.
Battery | |||||||
|---|---|---|---|---|---|---|---|
| Voltage | No. Included | Cap., amp-hrs. | Battery Charger Included | Battery Charging Time, min. | Compatible With | Each | |
| 18V DC | 2 | 3 | Yes | 39 | Viega MegaPress Viega ProPress Viega ProPress XL-C | 00000000 | 000000000 |
Jaw and ring sets include three jaws, three rings, and one ring actuator jaw. Jaws are for pipe sizes 1/2 to 1; they fit directly into the crimping tool. Rings are for pipe sizes 1 1/4 to 2; clip the ring around the fitting and use the ring actuator jaw and crimping tool to press the open ends together.
For Pipe | ||||||||
|---|---|---|---|---|---|---|---|---|
| Size | Material | For Manufacturer | For Manufacturer Model No. | Compatible With | Includes | Container Type | Each | |
| 1/2, 3/4, 1, 1 1/4, 1 1/2, 2 | Stainless Steel, Steel | Ridgid | RP 340 | Viega MegaPress | One Ring Actuator Jaw Three Jaws (1/2-1 Pipe Size) Three Rings (1 1/4-2 Pipe Size) | Carrying Case | 00000000 | 000000000 |
Aluminum Quick-Connect Pipe Fittings for Compressed Air
Twist these fittings onto aluminum pipe for quick, sealed connections—no threading, soldering, or welding necessary. Use them to build a compressed air system in half the time it would take to build a copper or steel system. Also known as Unipipe fittings, they’re part of a quick-connect system that’s compatible with pipe from Unipipe, Transair, and Infinity.
Finger tighten the collar on the end of these fittings, then use a wrench for the final quarter turn. The inside of these fittings has a compression ring and O-ring to seal against the pipe. They’re easy to take apart as needed to modify your setup.
For technical drawings and 3-D models, click on a part number.
- For Use With: Air, Coolant, Nitrogen, Oil
- Temperature Range: 0° to 210° F
- Specifications Met: ASME B31.1, ASME B31.3, ASME B31.9
- Pipe Nipples and Pipe: Use Quick-Disconnect Aluminum
Plugs block the end of a fitting. They include a ¼ BSPP valve that can be used to exhaust your line or attach a pressure gauge. To install, remove the fitting's nut, collar, and grip ring. Insert the plug into the fitting, slide the collar on, and tighten the nut. Discard the connector's grip ring.
Press-Connect Fittings for Copper Tubing
- For Use With: Drinking Water
- Maximum Pressure: Fittings compatible with Viega ProPress or Viega ProPress XL-C: 200 psi @ 72° F
Fittings compatible with Viega Pex or Viega PureFlow Press: 100 psi @ 72° F - Temperature Range: 0° to 250° F
- Tubing: Fittings compatible with Viega ProPress or Viega ProPress XL-C: Use with K, M, L copper
Fittings compatible with Viega Pex or Viega PureFlow Press: Use with hard polyethylene plastic - Specifications Met: See table
Crimp these fittings to copper tubing with a crimping tool (sold separately). An O-ring on the inside of the fitting creates a leak-tight connection that doesn’t require heat or soldering. They are comparable to Viega ProPress fittings. Fittings have good corrosion resistance. They meet NSF/ANSI safety standards for use with drinking water systems.
Copper tube size is the accepted designation of the copper tubing industry, not the actual tube OD.
For technical drawings and 3-D models, click on a part number.
| Copper Tube Size | For Tube OD | Lg. | Material | Compatible With | Specifications Met | Each | |
| 1 1/4 | 1 3/8" | 1 5/16" | Copper | Viega ProPress | ASME B16.51, ASME B31.1, ASME B31.3, ASME B31.9, NSF/ANSI 61, UL 213 | 00000000 | 000000 |
| 1 1/2 | 1 5/8" | 1 5/8" | Copper | Viega ProPress | ASME B16.51, ASME B31.1, ASME B31.3, ASME B31.9, NSF/ANSI 61, UL 213 | 00000000 | 00000 |
| 2 | 2 1/8" | 1 13/16" | Copper | Viega ProPress | ASME B16.51, ASME B31.1, ASME B31.3, ASME B31.9, NSF/ANSI 61, UL 213 | 00000000 | 00000 |
| 2 1/2 | 2 5/8" | 2 7/64" | Copper | Viega ProPress XL-C | ASME B16.51, ASME B31.1, ASME B31.3, ASME B31.9, NSF/ANSI 61, UL 213 | 00000000 | 000000 |
| 3 | 3 1/8" | 2 23/64" | Copper | Viega ProPress XL-C | ASME B16.51, ASME B31.1, ASME B31.3, ASME B31.9, NSF/ANSI 61, UL 213 | 00000000 | 000000 |
| 4 | 4 1/8" | 2 49/64" | Copper | Viega ProPress XL-C | ASME B16.51, ASME B31.1, ASME B31.3, ASME B31.9, NSF/ANSI 61, UL 213 | 00000000 | 000000 |
Jaws for copper tube sizes ½ to 2 fit directly into the included crimping tool.
Battery | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Copper Tube Size | For Tube OD | Voltage | No. Included | Cap., amp-hrs. | Battery Charger Included | Battery Charging Time, min. | Compatible With | Specifications Met | Each | |
| 1/2, 3/4, 1, 1 1/4, 1 1/2, 2 | 5/8", 7/8", 1 1/8", 1 3/8", 1 5/8", 2 1/8" | 18V DC | 2 | 3 | Yes | 39 | Viega ProPress | EMC 2011/65/EU, EMC 2014/30/EU, IEC 62841-1, UL 62841-1 | 00000000 | 000000000 |
Rings for copper tube sizes 2 ½ to 4 include a jaw actuator. Clip the rings around the fitting and use the jaw actuator and crimping tool (sold separately) to press the open ends together.
| For Copper Tube Size | For Tube OD | Includes | Compatible With | Each | |
| 2 1/2, 3, 4 | 2 5/8", 3 1/8", 4 1/8" | Three Rings (2 1/2-4 Copper Tube Size) One Ring Actuator Jaw | Viega ProPress XL-C | 00000000 | 000000000 |