How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Drain, Waste, and Vent ABS Pipe Fittings for Chemicals
These Schedule 40 fittings are an economical option for gravity-flow chemical waste systems. They are ABS plastic, which has excellent strength and impact resistance and good chemical resistance. Fittings meet ASTM D2661, ASTM D3311, ASTM D3965, and ASTM F1498 specifications and testing requirements for material quality and product dimensions.
Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with ABS cement (also known as solvent weld).
Warning: Never use plastic pipe fittings and pipe with compressed air or gas.
Sealants cannot be sold to Colorado, Connecticut, District of Columbia, Delaware, Illinois, Indiana, Massachusetts, Maryland, Maine, Michigan, New Hampshire, New Jersey, Northern Virginia, New York, Ohio, Pennsylvania, Rhode Island, or Utah due to local VOC (Volatile Organic Compounds) regulations.
- For Use With: Sodium Hydroxide
- Maximum Temperature: 180° F
- Specifications Met: ASTM D2661, ASTM D3311, ASTM D3965, ASTM F1498
- Pipe Nipples and Pipe: Use Schedule 40 ABS Plastic
- Flanges: Use Schedule 40 ABS Plastic
270° bend fittings are also known as P-traps. They separate into three pieces, so you can access your line.
- For Use With: Sodium Hydroxide
- Maximum Temperature: 180° F
- Specifications Met: ASTM D2661, ASTM D3311, ASTM D3965, ASTM F1498
- Pipe Nipples and Pipe: Use Schedule 40 ABS Plastic
- Flanges: Use Schedule 40 ABS Plastic
Fittings with a compression end are also known as slip-joint fittings. Insert the tube into the compression end and turn the nut until hand tight. Since you don't have to wait for cement to dry, they are quicker to install than socket-connect fittings.
270° bend fittings are also known as P-traps. They separate into three pieces, so you can access your line.
Gravity-Flow Polypropylene Pipe Fittings for Corrosive Chemical Waste
- For Use With: Deionized Water, Hydrochloric Acid, Oil, Phosphoric Acid, Salt Water, Solvents
- Maximum Temperature: 220° F
- Specifications Met: ASTM D4101, ASTM D635, ASTM F1412, UL 94 V-2
- Compatible with Gravity-Flow Polypropylene Pipe for Corrosive Chemical Waste
Made of polypropylene, these gravity-flow fittings withstand organic solvents, such as acetone, that would dissolve CPVC pipe. They also stand up to highly corrosive acids, such as hydrochloric acid, and alkalies. All meet UL and ASTM standards for flame retardance and self-extinguishment in the case of fire. They also meet strict ASTM specifications and testing requirements for material quality and product dimensions. They’re compatible with Orion Blueline No-Hub and Orion Rionfuse chemical waste pipe and pipe fittings.
270° bend connectors are also known as P-traps. Union connectors separate into three pieces for easy access to your line.
Aboveground Standard-Wall PVC Pipe Fittings for Drain, Waste, and Vent
- For Use With: Water
- Max. Temperature: 140° F
- Specifications Met: ASTM D1784, ASTM D2665
- Pipe Nipples and Pipe: Use Schedule 40 PVC Plastic
- Flanges: Use Schedule 40 PVC Plastic
These Schedule 40 fittings are the industry standard for gravity-flow drain, waste, and vent (DWV) applications. Fittings are PVC, which has good corrosion resistance. They meet ASTM D1784 and ASTM D2665 specifications and testing requirements for material quality.
Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a PVC primer and cement (also known as solvent weld).
Warning: Never use plastic pipe fittings and pipe with compressed air or gas.
Fittings with a compression end are also known as slip-joint fittings. Insert the tube into the compression end and turn the nut until hand tight. Since you don't have to wait for cement to dry, they are quicker to install than socket-connect fittings.
270° bend fittings are also known as P-traps. They separate into three pieces, so you can access your line.