How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Flame-Retardant PVDF Pipe Fittings for Chemicals
- For Use With: Chlorine, Salt Water, Solvents
- Temperature Range: 40° to 280° F
- Specifications Met: ASTM D3222, UL 94 V-0
- Pipe Nipples and Pipe: Use Schedule 80 PVDF Plastic
- Flanges: Use Class 150 PVDF Plastic
These fittings meet UL 94 V-0 for flame retardance, so they delay the spread of flames to valuable equipment. They are made of PVDF (polyvinylidene fluoride), which is comparable to Kynar, and has the chemical resistance to stand up to solvents and other harsh substances. Also known as Schedule 80 fittings, they have thick walls for heavy duty chemical processing applications. When connecting to pipe, apply a non-hardening, plastic-compatible sealant to the male threads to prevent leaks. Tape or sealants with PTFE are not recommended for plastic-to-plastic threaded connections. When making a threaded connection be careful not to overtighten the threads. To prevent cracks and leaks, finger tighten the fitting, then wrench-tighten one to two turns. Fittings meet ASTM D3222 specifications and testing requirements for material quality.
Warning: Never use plastic pipe fittings and pipe with compressed air or gas.
Sealants cannot be sold to Colorado, Connecticut, District of Columbia, Delaware, Illinois, Indiana, Massachusetts, Maryland, Maine, Michigan, New Hampshire, New Jersey, Northern Virginia, New York, Ohio, Pennsylvania, Rhode Island, or Utah due to local VOC (Volatile Organic Compounds) regulations.
For technical drawings and 3-D models, click on a part number.
Pipe Size | Material | Color | Max. Pressure | Each | |
NPT Threads | |||||
|---|---|---|---|---|---|
| 1/2 | PVDF Plastic | Red | 290 psi @ 72° F | 00000000 | 000000 |
| 3/4 | PVDF Plastic | Red | 230 psi @ 72° F | 00000000 | 00000 |
| 1 | PVDF Plastic | Red | 210 psi @ 72° F | 00000000 | 00000 |
| 1 1/2 | PVDF Plastic | Red | 160 psi @ 72° F | 00000000 | 000000 |
| 2 | PVDF Plastic | Red | 140 psi @ 72° F | 00000000 | 000000 |
| Non-Hardening Thread Sealant (8-oz. Brush-Top Can) | 000000 | Each | 000000 |
Unions separate into three pieces, so you can access your line without unthreading pipe connections.
| Pipe Size | Material | Color | O-Ring Material | Max. Pressure | Each | |
NPT Threads | ||||||
|---|---|---|---|---|---|---|
| 1/2 | PVDF Plastic | Red | Viton® Fluoroelastomer Rubber | 290 psi @ 72° F | 00000000 | 0000000 |
| 3/4 | PVDF Plastic | Red | Viton® Fluoroelastomer Rubber | 230 psi @ 72° F | 00000000 | 000000 |
| 1 | PVDF Plastic | Red | Viton® Fluoroelastomer Rubber | 210 psi @ 72° F | 00000000 | 000000 |
| 1 1/2 | PVDF Plastic | Red | Viton® Fluoroelastomer Rubber | 160 psi @ 72° F | 00000000 | 000000 |
| 2 | PVDF Plastic | Red | Viton® Fluoroelastomer Rubber | 140 psi @ 72° F | 00000000 | 000000 |
| Non-Hardening Thread Sealant (8-oz. Brush-Top Can) | 000000 | Each | 000000 |
| Pipe Size (A) | Pipe Size (B) | Material | Color | Max. Pressure | Each | |
NPT Threads | ||||||
|---|---|---|---|---|---|---|
| 3/4 | 1/2 | PVDF Plastic | Red | 230 psi @ 72° F | 00000000 | 000000 |
| 1 | 1/2 | PVDF Plastic | Red | 210 psi @ 72° F | 00000000 | 00000 |
| 1 | 3/4 | PVDF Plastic | Red | 210 psi @ 72° F | 00000000 | 00000 |
| 1 1/2 | 1 | PVDF Plastic | Red | 160 psi @ 72° F | 00000000 | 00000 |
| 2 | 1 1/2 | PVDF Plastic | Red | 140 psi @ 72° F | 00000000 | 000000 |
| Non-Hardening Thread Sealant (8-oz. Brush-Top Can) | 000000 | Each | 000000 |
| Pipe Size | Material | Color | Max. Pressure | Each | |
NPT Threads | |||||
|---|---|---|---|---|---|
| 1/2 | PVDF Plastic | Red | 290 psi @ 72° F | 00000000 | 000000 |
| 3/4 | PVDF Plastic | Red | 230 psi @ 72° F | 00000000 | 00000 |
| 1 | PVDF Plastic | Red | 210 psi @ 72° F | 00000000 | 000000 |
| 1 1/2 | PVDF Plastic | Red | 160 psi @ 72° F | 00000000 | 000000 |
| 2 | PVDF Plastic | Red | 140 psi @ 72° F | 00000000 | 000000 |
| Non-Hardening Thread Sealant (8-oz. Brush-Top Can) | 000000 | Each | 000000 |
| Pipe Size | Material | Color | Max. Pressure | Each | |
NPT Threads | |||||
|---|---|---|---|---|---|
| 1/2 | PVDF Plastic | Red | 290 psi @ 72° F | 00000000 | 000000 |
| 3/4 | PVDF Plastic | Red | 230 psi @ 72° F | 00000000 | 00000 |
| 1 | PVDF Plastic | Red | 210 psi @ 72° F | 00000000 | 000000 |
| 1 1/2 | PVDF Plastic | Red | 160 psi @ 72° F | 00000000 | 000000 |
| 2 | PVDF Plastic | Red | 140 psi @ 72° F | 00000000 | 000000 |
| Non-Hardening Thread Sealant (8-oz. Brush-Top Can) | 000000 | Each | 000000 |
Flame-Retardant PVDF Pipe Nipples and Pipe for Chemicals
- For Use With: Chlorine, Salt Water, Solvents
- Max. Temperature: 280° F
- Specifications Met: ASTM D3222, UL 94 V-0
- Fittings: Use Schedule 80 PVDF Plastic
- Flanges: Use Class 150 PVDF Plastic
Pipe meets UL 94 V-0 for flame retardance, so it delays the spread of flames to valuable equipment. It is PVDF (polyvinylidene fluoride), which is comparable to Kynar, and has the chemical resistance to stand up to solvents and other harsh substances. Also known as Schedule 80 pipe, it has thick walls for heavy duty chemical processing applications. Pipe meets ASTM D3222 specifications and testing requirements for material quality.
Warning: Never use plastic pipe fittings and pipe with compressed air or gas.
Sealants cannot be sold to Colorado, Connecticut, District of Columbia, Delaware, Illinois, Indiana, Massachusetts, Maryland, Maine, Michigan, New Hampshire, New Jersey, Northern Virginia, New York, Ohio, Pennsylvania, Rhode Island, or Utah due to local VOC (Volatile Organic Compounds) regulations.
For technical drawings and 3-D models, click on a part number.
To prevent leaks in threaded connections, apply a non-hardening, plastic-compatible sealant to the male threads. Tape or sealants with PTFE are not recommended for plastic-to-plastic threaded connections. When making a threaded connection be careful not to overtighten the threads. To prevent cracks and leaks, finger tighten the fitting, then wrench-tighten one to two turns.
| Pipe Size | OD | ID | Wall Thick. | Material | Color | Max. Pressure | Each | |
2" | ||||||||
|---|---|---|---|---|---|---|---|---|
NPT Threads | ||||||||
| 1/2 | 27/32" | 0.546" | 0.147" | PVDF Plastic | Red | 290 psi @ 72° F | 00000000 | 000000 |
| 3/4 | 1 3/64" | 0.742" | 0.154" | PVDF Plastic | Red | 230 psi @ 72° F | 00000000 | 00000 |
| 1 | 1 5/16" | 0.957" | 0.179" | PVDF Plastic | Red | 210 psi @ 72° F | 00000000 | 00000 |
| 1 1/2 | 1 29/32" | 1.5" | 0.2" | PVDF Plastic | Red | 160 psi @ 72° F | 00000000 | 00000 |
| 2 | 2 3/8" | 1.939" | 0.218" | PVDF Plastic | Red | 140 psi @ 72° F | 00000000 | 00000 |
4" | ||||||||
NPT Threads | ||||||||
| 1/2 | 27/32" | 0.546" | 0.147" | PVDF Plastic | Red | 290 psi @ 72° F | 00000000 | 00000 |
| 3/4 | 1 3/64" | 0.742" | 0.154" | PVDF Plastic | Red | 230 psi @ 72° F | 00000000 | 00000 |
| 1 | 1 5/16" | 0.957" | 0.179" | PVDF Plastic | Red | 210 psi @ 72° F | 00000000 | 00000 |
| 1 1/2 | 1 29/32" | 1.5" | 0.2" | PVDF Plastic | Red | 160 psi @ 72° F | 00000000 | 000000 |
| 2 | 2 3/8" | 1.939" | 0.218" | PVDF Plastic | Red | 140 psi @ 72° F | 00000000 | 000000 |
| Non-Hardening Thread Sealant (8-oz. Brush-Top Can) | 000000 | Each | 000000 |
Connect unthreaded pipe to unthreaded female socket-connect fittings using a primer and cement (also known as solvent weld).
| Pipe Size | OD | ID | Wall Thick. | Material | Color | Max. Pressure | Each | |
2 ft. | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1/2 | 27/32" | 0.546" | 0.147" | PVDF Plastic | Red | 290 psi @ 72° F | 00000000 | 0000000 |
| 3/4 | 1 3/64" | 0.742" | 0.154" | PVDF Plastic | Red | 230 psi @ 72° F | 00000000 | 000000 |
| 1 | 1 5/16" | 0.957" | 0.179" | PVDF Plastic | Red | 210 psi @ 72° F | 00000000 | 000000 |
| 1 1/2 | 1 29/32" | 1.5" | 0.2" | PVDF Plastic | Red | 160 psi @ 72° F | 00000000 | 000000 |
| 2 | 2 3/8" | 1.939" | 0.218" | PVDF Plastic | Red | 130 psi @ 72° F | 00000000 | 000000 |
5 ft. | ||||||||
| 1/2 | 27/32" | 0.546" | 0.147" | PVDF Plastic | Red | 290 psi @ 72° F | 00000000 | 000000 |
| 3/4 | 1 3/64" | 0.742" | 0.154" | PVDF Plastic | Red | 230 psi @ 72° F | 00000000 | 000000 |
| 1 | 1 5/16" | 0.957" | 0.179" | PVDF Plastic | Red | 210 psi @ 72° F | 00000000 | 000000 |
| 1 1/2 | 1 29/32" | 1.5" | 0.2" | PVDF Plastic | Red | 160 psi @ 72° F | 00000000 | 000000 |
| 2 | 2 3/8" | 1.939" | 0.218" | PVDF Plastic | Red | 130 psi @ 72° F | 00000000 | 000000 |
Flame-Retardant PVDF Pipe Flanges for Chemicals
- For Use With: Chlorine, Salt Water, Solvents
- Temperature Range: 40° to 280° F
- Specifications Met: ASTM D3222, UL 94 V-0
- Pipe Nipples and Pipe: Use Schedule 80 PVDF Plastic
- Fittings: Use Schedule 80 PVDF Plastic
Flanges meet UL 94 V-0 for flame retardance to delay the spread of flames to valuable equipment. They are made of PVDF (polyvinylidene fluoride), which is comparable to Kynar, and has the chemical resistance to stand up to solvents and other harsh substances. Also known as Pressure Class 150 flanges, they have thick, strong walls for heavy duty chemical processing applications. Bolt two same-size flanges together with a gasket (sold separately) to create an access point within a line. When connecting to pipe, apply a non-hardening, plastic-compatible sealant to the male threads to prevent leaks. Tape or sealants with PTFE are not recommended for plastic-to-plastic threaded connections. When making a threaded connection be careful not to overtighten the threads. To prevent cracks and leaks, finger tighten the flange, then wrench-tighten one to two turns. Flanges meet ASTM D3222 specifications and testing requirements for material quality.
Warning: Never use plastic pipe flanges and pipe with compressed air or gas.
Sealants cannot be sold to Colorado, Connecticut, District of Columbia, Delaware, Illinois, Indiana, Massachusetts, Maryland, Maine, Michigan, New Hampshire, New Jersey, Northern Virginia, New York, Ohio, Pennsylvania, Rhode Island, or Utah due to local VOC (Volatile Organic Compounds) regulations.
For technical drawings and 3-D models, click on a part number.
| Pipe Size | Flanged Connection Surface | Flange OD | For Bolt Dia. | Bolt Hole Dia. | Number of Bolt Holes | Bolt Circle Dia. | Material | Color | Max. Pressure | Each | |
Fixed Flange, Female Threaded × Flanged | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
NPT Threads | |||||||||||
| 1/2 | Flat | 3 1/2" | 1/2" | 5/8" | 4 | 2 5/16" | PVDF Plastic | Red | 150 psi @ 72° F | 00000000 | 0000000 |
| 3/4 | Flat | 3 7/8" | 1/2" | 5/8" | 4 | 2 11/16" | PVDF Plastic | Red | 150 psi @ 72° F | 00000000 | 000000 |
| 1 | Flat | 4 1/4" | 1/2" | 5/8" | 4 | 3 1/32" | PVDF Plastic | Red | 150 psi @ 72° F | 00000000 | 000000 |
| 1 1/2 | Flat | 5" | 1/2" | 5/8" | 4 | 3 3/4" | PVDF Plastic | Red | 150 psi @ 72° F | 00000000 | 000000 |
| 2 | Raised | 6" | 5/8" | 3/4" | 4 | 4 3/4" | PVDF Plastic | Red | 150 psi @ 72° F | 00000000 | 000000 |
| Non-Hardening Thread Sealant (8-oz. Brush-Top Can) | 000000 | Each | 000000 |
High-Purity PVDF Pipe for Corrosive Chemicals
Made of PVDF that’s finished to a 12 Ra smoothness, this pipe handles some of the harshest chemicals without leaching contaminants into your line. It won’t accumulate particles and is easy to clean, thanks to its smoothness. Comparable to Kynar, this pipe handles most organic solvents that would dissolve CPVC, and chlorine or nitric acid that would weaken polypropylene. You can use it at higher temperatures than CPVC and polypropylene. This pipe meets UL 94 V-0 and Factory Mutual standards for flame retardance. It’s also FDA compliant for direct contact with food, and it meets ASTM requirements for dimensions and tolerances. Also known as SDR 21 pipe.
Connect this pipe to fittings with socket fusion welding for a strong, permanent bond. Use a socket fusion tool with a heater bushing (sold separately) that matches your pipe size.
For technical drawings and 3-D models, click on a part number.
- For Use With: Chlorine, Deionized Water, Hydrochloric Acid, Nitric Acid, Oil, Phosphoric Acid, Salt Water, Solvents
- Temperature Range: -40° to 270° F
- Specifications Met: ASTM D3222, FDA Compliant 21 CFR 177.2510, FM 4910, UL 94 V-0
- Fittings: Use SDR 21 PVDF Plastic
| Pipe Size | OD | ID | Wall Thick. | Material | Color | Max. Pressure | For Fitting Standard Dimensional Ratio | Each | |
4 ft. | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1/2 | 25/32" | 0.638" | 0.075" | PVDF Plastic | White | 230 psi @ 72° F | SDR 21 | 0000000 | 0000000 |
| 3/4 | 63/64" | 0.835" | 0.075" | PVDF Plastic | White | 230 psi @ 72° F | SDR 21 | 0000000 | 000000 |
| 1 | 1 17/64" | 1.071" | 0.094" | PVDF Plastic | White | 230 psi @ 72° F | SDR 21 | 0000000 | 000000 |
| 1 1/2 | 1 31/32" | 1.732" | 0.118" | PVDF Plastic | White | 230 psi @ 72° F | SDR 21 | 0000000 | 000000 |
| 2 | 2 31/64" | 2.244" | 0.118" | PVDF Plastic | White | 230 psi @ 72° F | SDR 21 | 0000000 | 000000 |
8 ft. | |||||||||
| 1/2 | 25/32" | 0.638" | 0.075" | PVDF Plastic | White | 230 psi @ 72° F | SDR 21 | 0000000 | 000000 |
| 3/4 | 63/64" | 0.835" | 0.075" | PVDF Plastic | White | 230 psi @ 72° F | SDR 21 | 0000000 | 000000 |
| 1 | 1 17/64" | 1.071" | 0.094" | PVDF Plastic | White | 230 psi @ 72° F | SDR 21 | 0000000 | 000000 |
| 1 1/2 | 1 31/32" | 1.732" | 0.118" | PVDF Plastic | White | 230 psi @ 72° F | SDR 21 | 0000000 | 000000 |
| 2 | 2 31/64" | 2.244" | 0.118" | PVDF Plastic | White | 230 psi @ 72° F | SDR 21 | 0000000 | 00000000 |
| Includes | Each | |
| 5 Bushing Sets (1 each in 1/2, 3/4, 1, 1 1/2, and 2 Pipe Sizes) | 00000000 | 0000000 |
