These gaskets have a carbon steel outer ring and a 304 stainless steel inside sealing element with a PTFE filler that’s virtually chemically inert. They're also known as spiral-wound gaskets.

A space between the outer ring and the sealing element prevents the element from being squeezed inward and contaminating the process line.

Able to withstand temperatures up to 750° F, these graphite gaskets have a stainless steel insert for strength to handle pressure up to 1,000 psi.

These blended carbon/Buna-N rubber gaskets are unaffected by oil and temperatures up to 650° F.

Our highest-temperature gaskets, these are made of vermiculite to withstand temperatures up to 1800° F.

Furnished with enough nuts and bolts to create a connection between two steel pipe flanges.

These soft expanded PTFE gaskets are made of FDA-listed material for use with food and beverage.

Often used with fiberglass flanges where you want to avoid overtightening, these gaskets seal under low torque. They’re made of soft, expanded PTFE that is also known as Gore UPG.

A stainless steel insert in these PTFE gaskets adds strength and makes them reusable.

Resistant to boric acid, citric acid, isopropyl alcohol, fuel, oil, and transmission fluid.

These neoprene gaskets also resist salts.

Aramid fibers and SBR rubber are blended for resistance to water, inert gases, and abrasion.

The included plastic sleeves and washers provide a layer of protection against dielectric corrosion, which occurs when different metals are joined.

Each gasket comes with enough bolts and nuts to create a connection between two steel pipe flanges.

Aramid fibers are blended with SBR rubber to resist inert gases. These gaskets also resist abrasion.

Furnished with plastic sleeves and washers to provide a layer of protection against dielectric corrosion, which occurs when different metals are joined.

Made of FDA-listed material for use with food and beverage.

Reinforced with a stainless steel insert, these gaskets are stronger and can hold their shape better than gaskets without an insert.

A fiberglass filler in these PTFE gaskets provides strength to prevent them from thinning out when compressed.