Iron Pipe Hangers | McMaster-Carr

Filter by

System of Measurement

Pipe Size

Material

Thread Size

Mounting Location

Finish

Copper Tube Size

Mount Type

For Rigid Conduit Trade Size

Mounting Hole Diameter

Height

Construction

For EMT Conduit Trade Size

Width

Weight Capacity

1,000 lb. to 1,999 lb.

2,000 lb. to 2,999 lb.

3,000 lb. to 9,999 lb.

Not Rated

For IMC Conduit Trade Size

Closure Method

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

REACH

RoHS

Hanger Type

Load Location

61 Products

Snug-Fit Clamp Pipe Hangers

Place pipe between the hanger halves and adjust the side bolts for a tighter fit than other pipe hangers. When closed, the split ring forms a complete circle around the pipe for 360° support with no gaps. Mount by twisting a threaded rod through the threaded hole.

Zinc-Plated Iron—Mildly corrosion resistant, so these hangers are ideal for dry or slightly humid environments.

Epoxy-Coated Iron—Resist corrosion better than zinc-plated iron.

	ID				For Conduit Trade Size
	Inch	Metric, mm	For Pipe Size	For Copper Tube Size	EMT	IMC	Rigid	For Thread Size	Wt. Cap., lb.	Mounting Hole Dia.		Each
Iron



		11/16"	17	3/8	1/2	—	—	3/8	3/8"-16	180	3/8"	3023T67	00000


		7/8"	22	1/2	3/4	3/4	1/2	1/2	3/8"-16	180	3/8"	3023T68	0000
		1 1/16"	27	3/4	—	—	3/4	3/4	3/8"-16	180	3/8"	3023T69	0000
		1 5/16"	33	1	—	—	1	1	3/8"-16	180	3/8"	3023T71	0000
		1 11/16"	43	1 1/4	1 1/2	—	1 1/4	1 1/4	3/8"-16	180	3/8"	3023T72	0000
		1 7/8"	48	1 1/2	—	—	1 1/2	1 1/2	3/8"-16	180	3/8"	3023T73	0000
		2 3/8"	60	2	—	—	2	2	3/8"-16	180	3/8"	3023T74	00000
		2 7/8"	73	2 1/2	—	2 1/2	2 1/2	2 1/2	1/2"-13	300	1/2"	3023T15	00000
		3 1/2"	89	3	—	3	3	3	1/2"-13	300	1/2"	3023T16	00000
		4 1/2"	114	4	—	4	4	4	1/2"-13	300	1/2"	3023T48	00000


		Zinc-Plated Iron



				11/16"	17	3/8	1/2	—	—	3/8	3/8"-16	180	3/8"	3023T22	0000


				7/8"	22	1/2	3/4	3/4	1/2	1/2	3/8"-16	180	3/8"	3023T23	0000
				1 1/16"	27	3/4	—	—	3/4	3/4	3/8"-16	180	3/8"	3023T24	0000
				1 5/16"	33	1	—	—	1	1	3/8"-16	180	3/8"	3023T25	0000
				1 11/16"	43	1 1/4	1 1/2	—	1 1/4	1 1/4	3/8"-16	180	3/8"	3023T26	0000
				1 7/8"	48	1 1/2	—	—	1 1/2	1 1/2	3/8"-16	180	3/8"	3023T27	0000
				2 3/8"	60	2	—	—	2	2	3/8"-16	180	3/8"	3023T28	00000
				2 7/8"	73	2 1/2	—	2 1/2	2 1/2	2 1/2	1/2"-13	300	1/2"	3023T29	00000
				3 1/2"	89	3	—	3	3	3	1/2"-13	300	1/2"	3023T31	00000
				4 1/2"	114	4	—	4	4	4	1/2"-13	300	1/2"	3023T32	00000


				Epoxy-Coated Iron



						1/2"	12	—	3/8	—	—	—	3/8"-16	180	3/8"	3023T33	0000


						5/8"	15	—	1/2	—	—	—	3/8"-16	180	3/8"	3023T34	0000
						7/8"	22	—	3/4	—	—	—	3/8"-16	180	3/8"	3023T51	0000
						1 1/8"	28	—	1	—	—	—	3/8"-16	180	3/8"	3023T52	0000
						1 3/8"	34	—	1 1/4	—	—	—	3/8"-16	180	3/8"	3023T53	0000
						1 5/8"	41	—	1 1/2	—	1 1/4	—	3/8"-16	180	3/8"	3023T54	00000
						2 1/8"	53	—	2	—	—	—	3/8"-16	180	3/8"	3023T55	00000

Roller Loop Pipe Hangers

Compensate for linear movement as pipes expand and contract. The roller turns to accommodate motion as pipes carry fluids and gases at fluctuating temperatures or pressures. Attach to the ceiling with a threaded rod and nut (sold separately) or other fastener.

	ID			For Conduit Trade Size
	Inch	Metric, mm	For Pipe Size	EMT	IMC	Rigid	For Thread Size	Wt. Cap., lb.	Mounting Hole Dia.	No. of Nuts Req.		Each
Steel



		2 3/8"	60	2	—	2	2	3/8"-16	150	7/16"	1	3084T31	000000


		2 7/8"	73	2 1/2	2 1/2	2 1/2	2 1/2	1/2"-13	220	9/16"	1	3084T32	00000
		3 1/2"	89	3	3	3	3	1/2"-13	310	9/16"	1	3084T33	00000
		4"	102	3 1/2	3 1/2	3 1/2	3 1/2	1/2"-13	390	9/16"	1	3084T34	00000
		4 1/2"	114	4	4	4	4	5/8"-11	470	11/16"	1	3084T35	00000
		5 9/16"	141	5	—	—	5	5/8"-11	680	11/16"	1	3084T36	00000
		6 5/8"	168	6	—	—	6	3/4"-10	780	13/16"	1	3084T37	00000
		8 5/8"	219	8	—	—	—	3/4"-10	780	13/16"	1	3084T38	000000
		10 3/4"	273	10	—	—	—	7/8"-9	960	15/16"	1	3084T39	000000
		12 3/4"	324	12	—	—	—	7/8"-9	1,200	15/16"	1	3084T41	000000
		14"	356	14	—	—	—	1"-8	1,200	1 1/8"	1	3084T42	000000


		16"	406	16	—	—	—	1"-8	1,200	1 1/8"	1	3084T43	000000

Beam Clamps for Pipe, Tube, and Conduit


For Perpendicular Mounting	For Parallel Mounting

Secure lines of pipe, tubing, and conduit to the flange of a beam.

Galvanized Iron—Galvanized iron clamps have good corrosion resistance.

		For OD			For Beam Thk.					For Perpendicular Mounting		For Parallel Mounting
	For Beam Shape	Inch	Metric, mm	For Pipe Size	Min.	Max.	Wt. Cap.	Mount Type	Throat Dp.		Each		Each
Bottom and Top Beam Mount







				Galvanized Iron

				Flat, Taper	5/8"	16	3/8	1/8"	3/4"	Not Rated	Clamp On	7/16"	29585T81	000000	———	0


				Flat, Taper	7/8"	22	1/2	1/8"	3/4"	Not Rated	Clamp On	7/16"	29585T82	00000	8868T61	000000
				Flat, Taper	1"	25	3/4	1/8"	3/4"	Not Rated	Clamp On	7/16"	29585T83	00000	8868T62	00000
				Flat, Taper	1 5/16"	33	1	1/8"	3/4"	Not Rated	Clamp On	7/16"	29585T84	00000	8868T63	00000
				Flat, Taper	1 5/8"	41	1 1/4	1/8"	3/4"	Not Rated	Clamp On	7/16"	29585T85	00000	8868T64	00000
				Flat, Taper	1 7/8"	48	1 1/2	1/8"	3/4"	Not Rated	Clamp On	7/16"	29585T86	00000	8868T65	00000
				Flat, Taper	2 3/8"	60	2	1/8"	3/4"	Not Rated	Clamp On	7/16"	29585T87	00000	8868T66	00000

Roller Pipe Supports

Support lines that expand and contract. The roller on these supports compensates for movement in your line from changing temperatures. Often used outdoors, these supports are galvanized steel to resist corrosion in wet environments. Bolt them to the floor, beams, or brackets. They can also be welded into place.

								Mounting Hole				Thread		Temp. Range, ° F
	For OD	For Pipe Size	Wt. Cap., lb.	Lg.	Wd.	Ht.	Roller Material	Dia.	No. of	Ctr.-to-Ctr.	Mounting Hardware Included	Size	Lg.	Min.	Max.		Each
Galvanized Steel



		2 1/2", 64 mm	2	600	4 1/4"	1 1/4"	1 1/2"	Galvanized Cast Iron	3/8"	2	1 1/4"	Yes	3/8"-16	1 1/2"	-20	400	6581N11	000000


		3 5/8", 92 mm	3	700	5 3/4"	1 1/4"	1 3/4"	Galvanized Cast Iron	3/8"	2	2"	Yes	3/8"-16	1 1/2"	-20	400	6581N12	00000
		4 1/2", 114 mm	4	750	6 5/8"	1 1/2"	2 13/16"	Galvanized Cast Iron	1/2"	2	2"	Yes	1/2"-13	1 1/2"	-20	400	6581N2	00000
		6 3/4", 171 mm	6	1,070	9 7/8"	2"	2 3/4"	Galvanized Cast Iron	1/2"	2	3 1/8"	Yes	1/2"-13	1 1/2"	-20	400	6581N14	00000
		8 3/4", 222 mm	8	1,350	12 1/8"	2"	3"	Galvanized Cast Iron	5/8"	2	3 3/8"	Yes	5/8"-11	1 1/2"	-20	400	6581N15	000000
		11", 279 mm	10	1,730	14 3/8"	2"	3 5/8"	Galvanized Cast Iron	5/8"	2	5 1/4"	Yes	5/8"-11	2"	-20	400	6581N16	000000
		12 7/8", 327 mm	12	2,400	16 1/2"	2"	4 1/8"	Galvanized Cast Iron	5/8"	2	5 1/2"	Yes	5/8"-11	2"	-20	400	6581N17	000000
		14 1/4", 362 mm	14	3,130	18 1/4"	2 1/2"	4 11/16"	Galvanized Cast Iron	3/4"	2	6 1/2"	Yes	3/4"-10	2"	-20	400	6581N18	000000
		16 1/4", 413 mm	16	3,970	20 1/2"	3"	5 3/8"	Galvanized Cast Iron	3/4"	2	8 1/4"	Yes	3/4"-10	2 1/2"	-20	400	6581N19	000000