9 1/2" Long Pipe Nipples and Pipe

1/8 Pipe Size
Lg.	Construction		Each
9 1/2"	Seamless	4830K413	00000
1/4 Pipe Size
9 1/2"	Seamless	4830K418	00000
3/8 Pipe Size
9 1/2"	Seamless	4830K424	00000
1/2 Pipe Size
9 1/2"	Welded	4830K429	00000
3/4 Pipe Size
9 1/2"	Welded	4830K435	00000
1 Pipe Size
9 1/2"	Welded	4830K441	00000
1 1/4 Pipe Size
9 1/2"	Welded	4830K446	00000
1 1/2 Pipe Size
9 1/2"	Welded	4830K452	00000
2 Pipe Size
9 1/2"	Welded	4830K457	00000
3 Pipe Size
9 1/2"	Welded	4830K468	00000

NPT Threaded on Both Ends—316/316L Stainless Steel

For Use With: Natural Gas, Steam, Oil, Water, Air
Specifications Met: ASTM A733, ASME B1.20.1
Fittings: Use Class 150 stainless steel
Flanges: Use Class 150 stainless steel

1/2 Pipe Size
Lg.	Construction		Each
9 1/2"	Welded	4548K519	000000
3/4 Pipe Size
9 1/2"	Welded	4548K525	00000
1 Pipe Size
9 1/2"	Welded	4548K531	00000
1 1/2 Pipe Size
9 1/2"	Welded	4548K542	00000
2 Pipe Size
9 1/2"	Welded	4548K547	00000

Standard-Wall Steel Threaded Pipe Nipples and Pipe

Also known as Schedule 40, this pipe is designed for low-pressure applications. Use in noncorrosive applications.

Welded pipe has a weld bead on the inside.

NPT Threaded on Both Ends—1/8 to 1 Pipe Size

For Use With: Air, Natural Gas, Oil, Steam, Water
Specifications Met: ASTM A733, ASME B1.20.1, ASTM A53
Fittings: Use Class 125 or 150 Iron and Steel

1/8 Pipe Size
Lg.	Construction	Material		Each
9 1/2"	Welded	Steel	44615K713	000000
1/4 Pipe Size
9 1/2"	Welded	Steel	44615K722	00000
3/8 Pipe Size
9 1/2"	Welded	Steel	44615K731	00000
1/2 Pipe Size
9 1/2"	Welded	Steel	44615K739	0000
3/4 Pipe Size
9 1/2"	Welded	Steel	44615K748	0000
1 Pipe Size
9 1/2"	Welded	Steel	44615K757	00000

NPT Threaded on Both Ends—1 1/4 to 6 Pipe Size

For Use With: Air, Natural Gas, Oil, Steam, Water
Specifications Met: ASTM A733, ASME B1.20.1, ASTM A53
Fittings: Use Class 125 or 150 Iron and Steel

1 1/4 Pipe Size
Lg.	Construction	Material		Each
9 1/2"	Welded	Steel	44615K766	000000
1 1/2 Pipe Size
9 1/2"	Welded	Steel	44615K775	00000
2 Pipe Size
9 1/2"	Welded	Steel	44615K784	00000
2 1/2 Pipe Size
9 1/2"	Welded	Steel	44615K793	00000
3 Pipe Size
9 1/2"	Welded	Steel	44615K812	00000

Expansion Joints with Butt-Weld Ends

For Use With: Air, Natural Gas, Oil, Steam, Water
Temperature Range: -20° to 800° F
Maximum Pressure: 150 psi @ 72° F
Maximum Vacuum: 29 in. of Hg @ 72° F

These joints weld to unthreaded pipe or another butt-weld fitting for a leak-resistant, permanent connection. They reduce stress, vibration, and noise in metal piping systems by providing a point of flexibility to absorb movement.

			Distance
For Pipe OD	Pipe Size	Lg.	Compression	Expansion	Offset	Expansion Joint Type	Butt Weld End Material		Each
321 Stainless Steel
10 3/4"	10	9 1/2"	13/16"	7/16"	1/16"	Bellow	Steel	5254K16	000000000

Stainless Steel One-Way-Flow Rotating Joints

For Use With: Air, Oil, Steam, Water
Maximum Temperature:
Oil: 390° F
Steam: 350° F
Water: 300° F
Maximum Pressure:
Air: 300 psi @ 72° F
Oil: 100 psi @ 72° F
Steam: 120 psi @ 350° F
Water: 750 psi @ 72° F
Maximum Vacuum: 25 in. of Hg @ 72° F

These joints have a rotating shaft with threads on one end that connect to a continuously revolving drum, roller, or other rotating equipment. Use them to transfer hot and cold materials from your supply line. Joints are for one-way flow and are meant to be used in pairs—one joint serves as the supply line while the other serves as the return line. Joints are stainless steel for excellent resistance to corrosion caused by fluid flowing through them.

If your drum rotates counterclockwise as you face the connecting end, you should select a rotating joint with right-handed threads. If your drum rotates clockwise as you face the connecting end, you should select a rotating joint with left-handed threads.

Rotating Threads			Stationary Threads				Max. Speed, rpm
Pipe Size	Thread Type	Gender	Pipe Size	Thread Type	Gender	Thread Direction	Air	Water	Oil	Steam	Body Dia.	Lg.	Material	Shaft Material		Each
Right-Hand Rotating Threads
2	NPT	Male	2	NPT	Female	Right Hand	550	1,000	1,000	1,000	4 3/8"	9 1/2"	300 Series Stainless Steel	Stainless Steel	9177K572	000000000
Left-Hand Rotating Threads
2	NPT	Male	2	NPT	Female	Right Hand	550	1,000	__	__	4 3/8"	9 1/2"	300 Series Stainless Steel	Stainless Steel	9177K571	00000000

Threaded On/Off Valves

Use these valves in general purpose applications, such as those with water, oil, air, and inert gas.

Bronze valves are stronger and more durable than brass valves for a longer service life. Full-port valves do not restrict flow. Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

Bronze Body with Lever Handle—Straight

Female × Female

Valve Type: Ball
For Use With:
NPT: Argon, Helium, Krypton, Neon, Oil, Steam, Water, Xenon
BSPP and BSPT: Air, Argon, Helium, Krypton, Neon, Oil, Steam, Water, Xenon
UN/UNF: Air, Argon, Oil, Steam, Water
Seal Material: PTFE Plastic

Lever handles give you the most leverage for quickly opening and closing valves with minimal effort.

NPT Female × NPT Female
Pipe Size	Flow Coefficient (Cv)	Max. Pressure	Max. Steam Pressure	Temperature Range, °F	Port Type	End-to-End Lg.	Ball Material		Each
2	389	600 psi @ 100° F	150 psi @ 365° F	-20° to 450°	Full	4 7/8"	Brass	5754T36	0000000

Steel Body with Lockable Lever Handle—Straight

Valve Type: Ball
For Use With: Air, Argon, Helium, Krypton, Neon, Oil, Steam, Water, Xenon
Seal Material: PTFE Plastic

Lever handles give you the most leverage for quickly opening and closing valves with minimal effort.

Lockable handles can be fixed in place using a padlock (not included).

NPT Female × NPT Female
Pipe Size	Flow Coefficient (Cv)	Max. Pressure	Max. Steam Pressure	Temperature Range, °F	Vacuum Rating, in. of Hg	Port Type	End-to-End Lg.	Ball Material	For Max. Shackle Dia.		Each
1 1/2	135	1000 psi @ 100° F	200 psi @ 350° F	-20° to 500°	29.9	Full	4 3/4"	316 Stainless Steel	1/4"	8196N53	0000000
2	251	1000 psi @ 100° F	200 psi @ 350° F	-20° to 500°	29.9	Full	5 1/16"	316 Stainless Steel	1/4"	8196N54	000000

High-Pressure Threaded On/Off Valves

Rated for at least three times the pressure of standard threaded valves, these valves are used to start and stop the flow of compressed gas, pressurized water, or steam.

Lever handles are easy to open and close—they give you the most leverage of any handle type. Lockable lever handles can be fixed in place using a padlock (not included). Spring-close lever handles automatically close when you release them, so they’re good where the volume of flow needs to be closely monitored to avoid overflowing and spillage. They’re also called deadman’s handles.

316 stainless steel valves are more corrosion resistant than steel valves.

Standard-port valves slightly restrict flow.

Steel Body with Lockable Lever Handle

NPT Female × NPT Female

Valve Type: Ball
For Use With: See table
Seal Material: PTFE Plastic
Specifications Met: See table

NPT Female × NPT Female
Pipe Size	Max. Pressure	Flow Coefficient (Cv)	Temperature Range, °F	Vacuum Rating, in. of Hg	Port Type	End-to-End Lg.	For Max. Shackle Dia.	For Use With	Specifications Met		Each
1 1/2	3,000 psi @ 150° F	95	-20° to 230°	Not Rated	Standard	4 9/16"	9/32"	Water, Oil, Air, Argon, Helium, Krypton, Neon, Xenon	ANSI/FCI 70-2 Class VI	9786K27	0000000

Steel Body with Spring-Close Lever Handle

Valve Type: Ball
For Use With: Oil, Steam, Water
Seal Material: PTFE Plastic

NPT Female × NPT Female
Pipe Size	Max. Pressure	Max. Steam Pressure	Flow Coefficient (Cv)	Temperature Range, °F	Vacuum Rating, in. of Hg	Port Type	End-to-End Lg.		Each
1 1/2	1,500 psi @ 100° F	150 psi @ 365° F	84	-20° to 500°	29	Standard	4 3/8"	45155K67	0000000

316 Stainless Steel Body with Lockable Lever Handle

NPT Female × NPT Female

Valve Type: Ball
For Use With: See table
Seal Material: See table
Specifications Met: See table

NPT Female × NPT Female
Pipe Size	Max. Pressure	Flow Coefficient (Cv)	Temperature Range, °F	Vacuum Rating, in. of Hg	Seal Material	Port Type	End-to-End Lg.	For Max. Shackle Dia.	For Use With	Specifications Met		Each
1 1/2	3,000 psi @ 150° F	95	-40° to 230°	Not Rated	PTFE Plastic	Standard	4 9/16"	9/32"	Water, Oil, Air, Argon, Helium, Krypton, Neon, Xenon	ANSI/FCI 70-2 Class VI	47275K47	0000000

316 Stainless Steel Body with Spring-Close Lever Handle

Valve Type: Ball
For Use With: Oil, Steam, Water
Seal Material: PTFE Plastic

NPT Female × NPT Female
Pipe Size	Max. Pressure	Max. Steam Pressure	Flow Coefficient (Cv)	Temperature Range, °F	Vacuum Rating, in. of Hg	Port Type	End-to-End Lg.		Each
1 1/2	1,500 psi @ 100° F	150 psi @ 365° F	84	-20° to 500°	29	Standard	4 3/8"	45155K57	0000000

Threaded On/Off Valves for Fuel

Valve Type: Ball
For Use With: Diesel Fuel, Fuel Oil, Gasoline, Kerosene
Specifications Met: See table

Protect personnel and equipment in the presence of diesel fuel, fuel oil, gasoline, and kerosene. Fire-tested to meet American Petroleum Institute (API) 607, these valves are designed to securely isolate fluid and prevent the spread of fire. They have a lockable handle that can be fixed in place using a padlock (not included).

316 stainless steel valves are more corrosion resistant than steel valves.

Standard-port valves slightly restrict flow.

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

Steel Body—PTFE Plastic Seal
Pipe Size	Flow Coefficient (Cv)	Max. Pressure	Temp. Range, °F	Vacuum Rating, in. of Hg	Port Type	End-to-End Lg.	For Max. Shackle Dia.	Specifications Met		Each
NPT Female × NPT Female
2	81	2000 psi @ 250° F	-20° to 450°	26	Standard	4 5/16"	1/4"	American Petroleum Institute Standard 607 - Edition 4	4024T78	0000000
316 Stainless Steel Body—PTFE Plastic Seal
NPT Female × NPT Female
2	81	2000 psi @ 250° F	-20° to 450°	26	Standard	4 5/16"	1/4"	American Petroleum Institute Standard 607 - Edition 4	4040T68	000000

Flanged On/Off Valves for Chemicals

Bolt these valves to ANSI flanges—they meet ASME dimensional standards. They have a plastic body and a seal that withstand aggressive and corrosive solutions in chemical-processing applications.

Glass-filled vinyl ester valves stand up to a wide variety of harsh acids and solvents. You can rely on them for repeated use, changes in pressure and flow rate, and hot and cold conditions.

Valves with a lockable lever handle can be fixed in place with a padlock (not included). They give you more leverage than short lever handles, so you can quickly open and close the valve with minimal effort.

Standard-port valves slightly restrict flow.

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

Yellow Glass-Filled Vinyl Ester Body with Lockable Lever Handle

Valve Type: Ball
For Use With: Citric Acid, Deionized Water, Diesel Fuel, Ethanol, Ethylene Glycol, Fuel Oil, Gasoline, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Methanol, Methyl Ethyl Ketone, Mineral Spirits, Oil, Phosphoric Acid, Salt Water, Soap Solutions, Toluene, Water, Xylene
Ball Material: Glass-Filled Vinyl Ester
Seal Material: PTFE Plastic
Seat Material: PTFE Plastic
Packing Material: PTFE Plastic
For Flange Specifications Met: ASME B16.5, ASME B16.10

			Bolts
Pipe Size	Pressure Class	Flange OD	Circle Dia.	No. of Holes	Hole Dia.	Included	Flow Coefficient (Cv)	Max. Pressure	Temperature Range, °F	Vacuum Rating, in. of Hg	Port Type	End-to-End Lg.	For Max. Shackle Dia.		Each
Flanged × Flanged
1 1/2	150	5"	3 7/8"	4	5/8"	No	115	250 psi @ 100° F	-50° to 215°	29.9	Standard	6 1/2"	1/4"	5927T112	0000000

Threaded Gradual On/Off Valves for Boiler Blow-Off

Prevent boiler scale deposits and sediment buildup with these valves that meet ASME standards for boiler drainage applications. Also known as gate valves, they gradually open and close to prevent system damage from suddenly starting or stopping flow.

Valves with a wheel handle open and close with multiple turns, providing more controlled, shock-resistant flow than valves with a lever handle.

Valves with a nonrising stem fit well in low-clearance places since the handle doesn’t move up when the valve opens.

Cast iron valves absorb vibration, reducing noise from your industrial boiler.

Use repair kits to replace worn-out seals.

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

Wheel Handle and Nonrising Stem—Cast Iron Body and Gate

Valve Type: Gate
For Use With: Water
Packing Material: EPDM Rubber
Specifications Met: ASME B16.34, ASME B16.5, ASME B31.1, ASME BPVC.I

Valves
					O'all				Repair Kits
Pipe Size	Flow Coefficient (Cv)	Max. Pressure	Temp. Range, °F	End-to-End Lg.	Ht.	Lg.		Each		Each
NPT Female
1 1/2	108	250 psi @ 350° F	35° to 350°	4 1/2"	13"	9 1/2"	7917T53	000000000	8436N103	0000000

Air-Driven On/Off Valves for Fuel

With Four Bolt Holes

With Eight Bolt Holes

Valve Type: Butterfly
For Use With: Oil, Diesel Fuel, Ethylene Glycol, Kerosene, Butane, Fuel Oil, Gasoline, Natural Gas, Propane
Seal Material : Viton® Fluoroelastomer Rubber
Specifications Met: API 609, MSS-SP-67

Use these valves to safely transfer fuel and oil. They operate on compressed air to automatically start and stop flow faster than motor-driven valves. You must control the air to the actuator using either the included electric pilot valve or a manual on/off valve (not included). These valves don’t require a minimum pressure drop between the inlet and outlet for operation.

The actuator is directly mounted to the valve body to minimize movement and reduce wear. A visual flow indicator on the top of the actuator shows whether the valve is open or closed. The manual override allows you to operate the valve during power outages.

All valves are lug style; their hole pattern matches ANSI flanges of the same pipe size. They can be sandwiched between two flanges, or bolt them directly to a single flange for servicing one end of the pipeline without depressurizing the other side.

Single-acting actuators only require air pressure to open the valve; they automatically spring closed when the air turns off. These valves are normally closed unless actuated. Double-acting actuators require air pressure to open and close the valve. Once actuated, these valves remain actuated until air pressure is applied, so they do not have a valve starting position.

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

		Bolts										Air
Pipe Size	Flange OD	No. of Holes	Hole Size	Included	Circle Dia.	Flow Coefficient (Cv)	Max. Pressure	Pressure Drop	Temp. Range, °F	Valve Lg.	O'all Ht.	Connection	Pressure Range, psi		Each
Ductile Iron Body with Screw Terminals
Single Acting: Air-to-Open, Spring Return (Normally Closed)—120V AC
3	7 1/2"	4	5/8"	No	6"	300	250 psi @ 100° F	Zero Pressure Drop	10° to 350°	1 3/4"	16 9/16"	1/4 NPT Female	40 to 115	2529N16	0000000
Double Acting: Air-to-Open, Air-to-Close—120V AC
6	11"	8	3/4"	No	9 1/2"	1,620	250 psi @ 100° F	Zero Pressure Drop	10° to 350°	2 3/16"	20 9/16"	1/4 NPT Female	40 to 115	2529N14	00000000

Flanged Air-Driven On/Off Valves for Chemicals

Valve Type: Ball
For Use With: Water, Oil, Air, Natural Gas, Propane, Butane, Acetone, Argon, Carbon Dioxide, Deionized Water, Diesel Fuel, Ethanol, Ethylene Glycol, Fuel Oil, Gasoline, Helium, Kerosene, Methanol, Methyl Ethyl Ketone, Mineral Spirits, Neon, Nitric Acid, Nitrogen, Oxygen, Salt Water, Soap Solutions, Steam, Xenon, Citric Acid, Krypton
Ball Material: 316 Stainless Steel
Seal Material : PTFE Plastic
Seat Material: PTFE Plastic
Actuator Housing Material: Aluminum
Specifications Met: ASME B16.34

A 316 stainless steel body and a PTFE seal stand up to aggressive and corrosive solutions in chemical-processing applications. Their ball-valve design allows these valves to handle at least three times the flow of standard flanged valves. For faster actuation than motor-driven valves, they operate on compressed air. You must control the air to the actuator using either the included electric pilot valve or a manual on/off valve (not included). These valves automatically start and stop flow and don't require a minimum pressure drop between the inlet and outlet for operation.

Valves are full port, so they do not restrict flow. The actuator is secured to the valve body with a bracket for easy disassembly, maintenance, and repair. A visual flow indicator on the top of the actuator shows whether the valve is open or closed. The manual override allows you to operate the valve during power outages.

Double-acting actuators require air pressure to open and close the valve. Once actuated, these valves remain actuated until air pressure is applied to close them, so they do not have a valve starting position.

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

			Bolts											Air
Pipe Size	Gender	Flange OD	No. of Holes	Hole Size	Included	Circle Dia.	Flow Coefficient (Cv)	Max. Pressure	Max. Steam Pressure	Pressure Drop	Temp. Range, °F	Valve Lg.	O'all Ht.	Connection	Pressure Range, psi		Each
316 Stainless Steel Body with Screw Terminals
Double Acting: Air-to-Close, Air-to-Open—120V AC
3	Female	7 1/2"	4	0.551"	No	6"	1,013	275 psi @ 100° F	100 psi @ 338° F	Zero Pressure Drop	0° to 365°	4 13/16"	15 1/4"	1/4 NPT Female	40 to 115	2538N12	000000000

About Actuated On/Off Valves

About Rotating Joints

Selecting and Measuring Expansion Joints

About Gradual On/Off Valves

About On/Off Valves

Standard-Wall Stainless Steel Threaded Pipe Nipples and Pipe

Standard-Wall Steel Threaded Pipe Nipples and Pipe

Expansion Joints with Butt-Weld Ends

Stainless Steel One-Way-Flow Rotating Joints

Threaded On/Off Valves

High-Pressure Threaded On/Off Valves

Threaded On/Off Valves for Fuel

Flanged On/Off Valves for Chemicals

Threaded Gradual On/Off Valves for Boiler Blow-Off

Air-Driven On/Off Valves for Fuel

Flanged Air-Driven On/Off Valves for Chemicals