Typically used with low-pressure stainless steel threaded pipe fittings.

Unlike other stainless steel fittings, these are made in the U.S.A. for superior quality. As another marker of quality, they come with a certificate with a traceable lot number and test report that guarantees material composition.

The male threads on these fittings have a sealant applied for extra leak protection.

Use these heavy duty, corrosion-resistant fittings in high-pressure flow applications.

Use these fittings in extreme-pressure conditions up to 15,000 psi.

When space is at a premium choose these compact fittings.

Typically used with low-pressure brass and bronze threaded pipe fittings.

Typically used with low-pressure brass and bronze threaded pipe fittings.

Less than an inch in length, these miniature fittings work well in low-pressure pipe lines that are tight on space.

Used in low-pressure pipe lines, these brass fittings have a plating that makes them shiny and improves corrosion resistance.

These brass fittings have the strength to handle high-pressure applications.

Typically used with high-pressure brass and bronze threaded pipe fittings.

Use these heavy-duty brass fittings for high-pressure drinking water applications.

The plating on these brass fittings creates a shiny finish and provides extra protection in corrosive environments. Fittings have the strength to handle high-pressure applications.

Install and remove these high-pressure brass fittings with a socket wrench or hex key (sold separately).

Plated with nickel, these brass fittings resist rust better than steel and unfinished brass fittings. Select them when you need more strength in corrosive environments to handle higher pressures than our low-pressure fittings.

Also known as instrumentation fittings, these have the most precise threads and the tightest tolerances of all the brass pipe fittings we offer.

Also known as Schedule 40, this steel pipe is designed for low-pressure applications.

Pipe has clockwise (right-hand) threads on one end and counterclockwise (left-hand) threads on the other end. When you use a wrench to turn, connections on both ends tighten at the same time.

To prevent leaks in low-pressure lines, the male threads on these fittings have an acrylic sealant already applied for extra protection.

The galvanized finish on these fittings provides fair corrosion resistance. Fittings are for use in low-pressure applications.

Typically used with medium-pressure iron and steel threaded pipe fittings. Also known as Schedule 80.

Typically used with medium-pressure galvanized iron and steel threaded pipe fittings. Also known as Schedule 80.

These fittings can stand up to high-pressure applications. Use them in noncorrosive environments.

The strongest steel fittings we offer, these can withstand extreme-pressure applications.

Typically used with thick-wall and high-pressure iron and steel unthreaded pipe fittings. Also known as Schedule 80.

Typically used with low-pressure aluminum threaded pipe fittings.

Designed for medium-pressure applications, these fittings have better strength than our low-pressure aluminum pipe fittings.

Connect these fittings to Schedule 80 pipe. With thicker, stronger walls than standard-wall fittings, they can handle heavy duty supply applications, such as water processing, wastewater treatment, and irrigation.

Connect these fittings to Schedule 40 plastic pipe—they are the industry standard for residential and commercial low-pressure plumbing and water supply applications. They are plastic for good corrosion resistance.

Made of polypropylene, these fittings won’t deteriorate when exposed to the damaging effects of ultraviolet light and are suitable to use outdoors. They have the chemical resistance to withstand acids, solvents, and other harsh substances.

Extreme temperatures are no problem for these fittings—they’re made of PTFE, so they can withstand a wider temperature range than any of our other plastic pipe fittings for chemicals. They are commonly used in high-purity chemical flow processes, such as semiconductor and clean room applications.

Use these plastic fittings to connect gasoline fuel lines to machines and equipment. They have excellent corrosion resistance as well as high strength and impact resistance.

Made of PVDF, also known as Kynar, these fittings stand up to the harsh chemicals used to clean food processing lines. Unlike other plastic fittings, such as nylon and acetal fittings, they’ll resist degrading when exposed to strong alkali and highly acidic solutions.

Joints are aluminum, which is lighter than other metals.

Extend your reach in hard-to-access areas—turn these valves on and off using a square ratchet to grasp the hole at the end of the handle. Use with water, oil, air, and inert gas.

Access the handle of these valves while protecting your line behind an instrument panel. They have threads and a hex nut below the handle for panel mounting.

Make connections from any direction—the body of these valves swivels 360° for easy installation. Often used in testing and sampling applications, they quickly open and close with a toggle or button.

Install these valves in tight spots, such as where pipelines are crowded together. They’re less than half as long as standard threaded valves and one-third shorter in height. Use with water, oil, air, and inert gas.

Fit these short and slim valves in control boxes, panels, and other tight spots. Made of plastic, they won’t pit or corrode on the inside like metal valves, and they’re lighter in weight for easy handling.

Insert tubing into the fittings on these valves—no heat, solder, or flux required.

Install these valves in tight spaces—they have a short body length and low profile. A barbed end grips onto tubing for a secure hold.

Made of metal, these valves are more durable than plastic valves and withstand higher temperatures. A compression sleeve bites into tubing as you tighten the nut, forming a strong seal.

A low-profile handle allows these valves to fit in low-clearance pipelines for diesel fuel, fuel oil, and kerosene.

A short body length and low profile make these valves ideal for installation in tight spaces, such as behind panels. They meet NSF/ANSI 61 standards for safe use in drinking water systems.

For chemical-processing applications in confined areas, these valves have a low-profile handle to fit in tight spots. A rubber seal and a plastic body stand up to aggressive, corrosive solutions.