Made to fit the most common mounting footprint, these cylinders have an NFPA (National Fluid Power Association) industry-standard footprint, ensuring easy interchangeability.

Rods along the barrel of these cylinders secure the end caps and shield the barrel from impact.

Get the power and stroke of other tie rod cylinders in less than half the space.

These cylinders have self-adjusting cushions that automatically compensate for changes in load and speed.

Our most corrosion-resistant air cylinders, these cylinders are made of stainless steel for use in wet environments.

An extruded-aluminum body means these cylinders have no open spaces for debris to collect.

Push and pull light duty loads. These air cylinders use compressed air to both extend and retract, so they operate at nearly full force in either direction.

At less than two inches in length, these cylinders actuate small devices in spots where other cylinders don’t fit.

Built to withstand hard knocks, these cylinders have a thick barrel wall for more durability than standard air cylinders.

Simplify your setup by running fluid or air through the hollow piston in these air cylinders. The rod extends from both ends, so they can push an object and pull another at the same time, unlike standard air cylinders.

Push and pull light duty loads in areas constantly exposed to dust and powders as fine as flour.

Clamp items in place to complete a step in your manufacturing process.

Minimize the release of particles that can damage electronics or contaminate batches as you push and pull light loads. These air cylinders are designed with seals and caps that prevent particles from escaping.

Threaded through-holes in each corner allow you to mount these cylinders directly to equipment or mount with attachments.

For multiple mounting options, these air cylinders match an industry standard ISO footprint and have threaded holes on the face and sides.

Combine the lifting power of a vacuum with the actuation of an air cylinder to automate processes such as pick and place. With a hollow rod that’s threaded to connect to a vacuum pad, these cylinders let you move items with suction.

These general purpose gas springs assist in opening lids, covers, windows, conveyors, and seats—similar to a hatchback opening on a car.

A temperature-resistant seal allows these gas springs to withstand heat up to 392°F.

With no gas to leak out and a corrosion-resistant 316 stainless steel construction, these mechanical springs are built for long-term, maintenance-free use in wet environments.

Made from stainless steel for excellent corrosion resistance in damp environments.

Made from stainless steel for excellent corrosion resistance in damp environments.

Made from stainless steel for excellent corrosion resistance in damp environments. These gas springs have a bleed valve so you can release gas to permanently reduce the force to meet your requirements.

Often used to replace coil springs in metal stamping and die-spring applications, these gas springs match the diameter and stroke length of coil die springs but offer much more force.

Automatically locking when fully extended and made of 316 stainless steel to resist corrosion, these gas springs protect material and equipment underneath heavy loads in damp environments.

Release gas from these springs until they supply the exact force you need—made of corrosion-resistant 316 stainless steel, they’re commonly used in wet environments.