About Structural Adhesives
More
Pipe Cement for Plastic Pipe
Create strong, leakproof joints between unthreaded pipe and fittings. Cleaner and primer (sold separately) are recommended to prepare pipe for adhesion.
Cement for CPVC plastic and for PVC plastic meets NSF/ANSI 61 safety standards for use on drinking water systems. It is also suitable for drain, waste, and vent pipes.
Cement for ABS plastic is for use in drain, waste, and vent systems.
Cement for ABS, PVC, and CPVC plastic works on most plastic pipe, conduit, water lines, and drain, waste, and vent systems.


For Max. Pipe Dia. | Begins to Harden | Reaches Full Strength | Consistency | Viscosity, cP | Temp. Range, °F | Color | Specifications Met | 8 fl. oz. | 16 fl. oz. | 32 fl. oz. | |
For CPVC Plastic | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
2" | 60 sec. | 12 hrs. | Thin Liquid | 500 | 40° to 110° | Yellow | ASTM F493, NSF/ANSI 61 | 00000000 | |||
6" | 60 sec. | 24 hrs. | Thin Liquid | 500 | 40° to 110° | Orange | ASTM F493, NSF/ANSI 61 | 00000000 | |||
For PVC Plastic | |||||||||||
6" | 60 sec. | 24 hrs. | Thin Liquid | 500 | 40° to 110° | Clear | ASTM D2564, NSF/ANSI 61 | 00000000 | |||
12" | 60 sec. | 24 hrs. | Thick Liquid | 1,600 | 40° to 110° | Clear | ASTM D2564, NSF/ANSI 61 | 00000000 | |||
12" | 60 sec. | 24 hrs. | Thick Liquid | 1,600 | 40° to 110° | Gray | ASTM D2564, NSF/ANSI 61 | 00000000 | |||
For ABS Plastic | |||||||||||
6" | 60 sec. | 24 hrs. | Thin Liquid | 500 | 40° to 110° | Black | ASTM D2235 | 00000000 | |||
For ABS, PVC, and CPVC Plastic | |||||||||||
6" | 60 sec. | 24 hrs. | Thin Liquid | 500 | 40° to 110° | Cream | __ | 00000000 |
Pipe Cement for Corrosive Waste Plastic Pipe

Because this cement won't break down when exposed to corrosive waste, it's often used on plastic pipe fittings in laboratories.
Pipe Dia. | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Min. | Max. | Begins to Harden | Reaches Full Strength | Consistency | Viscosity, cP | Temp. Range, °F | Color | Specifications Met | For Use On | Each | |
16 fl. oz. | |||||||||||
1 1/2" | 24" | 60 min. | 2 hrs. | Thick Liquid | 1,600 | 40° to 110° | Yellow | ASTM F2618, ASTM F493, NSF/ANSI 14 | CPVC Plastic | 0000000 | 000000 |
32 fl. oz. | |||||||||||
1 1/2" | 24" | 60 min. | 2 hrs. | Thick Liquid | 1,600 | 40° to 110° | Yellow | ASTM F2618, ASTM F493, NSF/ANSI 14 | CPVC Plastic | 0000000 | 000000 |
Nonwhitening Cement for Acrylic


When appearance is important, this cement dries clear and forms strong bonds on acrylic.
Cement that cannot be sold to the regions listed exceeds local regulatory limits on VOCs (volatile organic compounds).
Cement | |||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Container | Dispensing Guns | Mixer Nozzles | |||||||||||||||
Mfr. Model No. | Size | Type | Begins to Harden | Reaches Full Strength | Mix Ratio | Consistency | Viscosity | Temp. Range | Color | For Joining | Cannot Be Sold To | Each | Each | Each | |||
SciGrip Cement | |||||||||||||||||
4 | 4 fl. oz. | Can | 60 sec. | 7 days | __ | Thin Liquid | Not Rated | Not Rated | Clear | Plastic | Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA; Ventura County, CA | 000000 | 000000 | 000000 | 00 | 000000 | 00 |
4 | 16 fl. oz. | Can | 60 sec. | 7 days | __ | Thin Liquid | Not Rated | Not Rated | Clear | Plastic | Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA; Ventura County, CA | 000000 | 00000 | 000000 | 00 | 000000 | 00 |
4SC | 4 fl. oz. | Can | 60 sec. | 7 days | __ | Thin Liquid | Not Rated | Not Rated | Clear | Plastic | Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA; Ventura County, CA | 000000 | 00000 | 000000 | 00 | 000000 | 00 |
4SC | 16 fl. oz. | Can | 60 sec. | 7 days | __ | Thin Liquid | Not Rated | Not Rated | Clear | Plastic | Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA; Ventura County, CA | 000000 | 00000 | 000000 | 00 | 000000 | 00 |
4SC | 1 gal. | Can | 60 sec. | 7 days | __ | Thin Liquid | Not Rated | Not Rated | Clear | Plastic | Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA; Ventura County, CA | 00000000 | 000000 | 000000 | 00 | 000000 | 00 |
40 | 16 fl. oz. | Can | 20 min. | 7 days | 20:1 | Thick Liquid | Not Rated | Not Rated | Clear | Plastic | __ | 000000 | 00000 | 000000 | 00 | 000000 | 00 |
40 | 1 gal. | Can | 20 min. | 7 days | 20:1 | Thick Liquid | Not Rated | Not Rated | Clear | Plastic | __ | 00000000 | 000000 | 000000 | 00 | 000000 | 00 |
42 | 1.69 fl. oz. | Cartridge | 15 min. | 7 days | 10:1 | Thick Liquid | Not Rated | Not Rated | Clear | Plastic | __ | 00000000 | 00000 | 0000000 | 0000000 | 00000000 | 00000 |
42 | 7.8 fl. oz. | Cartridge | 15 min. | 7 days | 10:1 | Thick Liquid | Not Rated | Not Rated | Clear | Plastic | __ | 00000000 | 00000 | 0000000 | 000000 | 000000000 | 0000 |
Cement for Plastic



Form strong bonds on most plastics.
Cement that cannot be sold to the regions listed exceed local regulatory limits on VOCs (volatile organic compounds).
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size | Type | Begins to Harden | Reaches Full Strength | Consistency | Viscosity, cP | Temp. Range | Color | For Joining | Cannot Be Sold To | Each | |
SciGrip Cement | ||||||||||||
16 | 1.5 fl. oz. | Tube | 5 min. | 21 days | Thin Liquid | 800 | Not Rated | Clear | Plastic, Rubber | Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA | 0000000 | 00000 |
3 | 16 fl. oz. | Can | 60 sec. | 7 days | Thin Liquid | Not Rated | Not Rated | Clear | Plastic, Rubber | Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA | 0000000 | 00000 |
4052 | 16 fl. oz. | Can | 15 min. | 7 days | Thin Liquid | 500 | Not Rated | Clear | Plastic | Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA | 0000000 | 00000 |
4707 | 1 gal. | Can | 10 min. | 21 days | Thick Liquid | 4,000 | Not Rated | White | Plastic | __ | 0000000 | 00000 |
4807 | 1 gal. | Can | 10 min. | 21 days | Thin Liquid | 600 | Not Rated | White | Plastic | Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA | 0000000 | 000000 |
Contact Adhesives




Apply these adhesives on two surfaces, air dry, and then bring together to bond.
4693 works on hard-to-bond plastics, such as polypropylene and polyethylene.
Black adhesive works especially well on foam insulation.
Adhesives that cannot be sold to the regions listed exceed local regulatory limits on VOCs (volatile organic compounds).
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size | Type | Begins to Harden | Reaches Full Strength | Shear Strength, lbs./sq. in. | Consistency | Viscosity, cP | Temp. Range, °F | Color | For Joining | Cannot Be Sold To | Each | |
3M Adhesives | |||||||||||||
1099 | 32 fl. oz. | Can | 40 min. | 72 hrs. | 3,405 | Thick Liquid | 3,000 | -10° to 230° | Beige | Fabric, Foam, Plastic, Rubber | __ | 00000000 | 000000 |
1099 | 1 gal. | Can | 40 min. | 72 hrs. | 3,405 | Thick Liquid | 3,000 | -10° to 230° | Beige | Fabric, Foam, Plastic, Rubber | __ | 00000000 | 000000 |
1357 | 1 gal. | Can | 10 min. | 24 hrs. | 158 | Thin Liquid | 325 | -30° to 220° | Light Yellow | Ceramic, Glass, Masonry, Metal, Wood | Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA; CT; DC; DE; MA; MD; ME; NH; NJ; NY; PA; RI; UT; Northern VA; VT | 00000000 | 000000 |
2262 | 32 fl. oz. | Can | 10 min. | 24 hrs. | Not Rated | Thin Liquid | 525 | -10° to 230° | Clear | Metal, Plastic, Rubber | Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA | 00000000 | 000000 |
4475 | 32 fl. oz. | Can | 10 min. | 72 hrs. | Not Rated | Thick Liquid | 8,500 | -10° to 230° | Clear | Ceramic, Fabric, Glass, Plastic, Rubber | Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA; CT; DC; DE; MA; MD; ME; NJ; NY; PA; RI; UT; Northern VA; VT | 00000000 | 000000 |
4693 | 32 fl. oz. | Can | 60 min. | 72 hrs. | Not Rated | Thin Liquid | 225 | -10° to 230° | Amber | Plastic, Rubber | Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA; CT; DC; DE; MA; MD; ME; NJ; NY; PA; RI; UT; Northern VA; VT | 00000000 | 00000 |
4693 | 1 gal. | Can | 60 min. | 72 hrs. | Not Rated | Thin Liquid | 225 | -10° to 230° | Amber | Plastic, Rubber | Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA; CT; DC; DE; MA; MD; ME; NJ; NY; PA; RI; UT; Northern VA; VT | 00000000 | 000000 |
Pliobond Adhesives | |||||||||||||
20 | 1 fl. oz. | Tube | 3 min. | 14 days | 1,200 | Thin Liquid | 800 | -40° to 370° | Beige | Ceramic, Glass, Metal, Plastic, Rubber | __ | 0000000 | 0000 |
25 | 8 fl. oz. | Brush-Top Can | 3 min. | 14 days | 1,200 | Thin Liquid | 800 | -40° to 370° | Beige | Ceramic, Metal, Plastic, Rubber | __ | 0000000 | 00000 |
25 | 16 fl. oz. | Can | 3 min. | 14 days | 1,200 | Thin Liquid | 800 | -40° to 370° | Beige | Ceramic, Metal, Plastic, Rubber | __ | 0000000 | 00000 |
25 | 32 fl. oz. | Can | 3 min. | 14 days | 1,200 | Thin Liquid | 800 | -40° to 370° | Beige | Ceramic, Metal, Plastic, Rubber | Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA | 000000 | 00000 |
25 | 1 gal. | Can | 3 min. | 14 days | 1,200 | Thin Liquid | 800 | -40° to 370° | Beige | Ceramic, Metal, Plastic, Rubber | Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA | 000000 | 000000 |
35 | 8 fl. oz. | Brush-Top Can | 3 min. | 14 days | 1,200 | Thick Liquid | 6,500 | -40° to 370° | Beige | Cardboard, Fabric, Foam, Wood | __ | 0000000 | 00000 |
35 | 16 fl. oz. | Can | 3 min. | 14 days | 1,200 | Thick Liquid | 6,500 | -40° to 370° | Beige | Cardboard, Fabric, Foam, Wood | __ | 0000000 | 00000 |
35 | 32 fl. oz. | Can | 3 min. | 14 days | 1,200 | Thick Liquid | 6,500 | -40° to 370° | Beige | Cardboard, Fabric, Foam, Wood | Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA | 0000000 | 00000 |
35 | 1 gal. | Can | 3 min. | 14 days | 1,200 | Thick Liquid | 6,500 | -40° to 370° | Beige | Cardboard, Fabric, Foam, Wood | Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA | 0000000 | 000000 |
Weldwood Adhesives | |||||||||||||
__ | 3 fl. oz. | Bottle | 15 min. | 72 hrs. | Not Rated | Thick Liquid | Not Rated | -40° to 150° | Beige | Composites, Plastic, Rubber, Wood | __ | 0000000 | 0000 |
__ | 16 fl. oz. | Can | 15 min. | 72 hrs. | Not Rated | Thick Liquid | Not Rated | -40° to 180° | Beige | Composites, Plastic, Rubber, Wood | __ | 0000000 | 00000 |
Adhesives | |||||||||||||
__ | 4 fl. oz. | Brush-Top Can | 2 min. | 24 hrs. | Not Rated | Thin Liquid | 1,200 | -30° to 150° | Clear | Copper, Fabric, Foam, Rubber, Steel, Wood | __ | 000000 | 00000 |
__ | 8 fl. oz. | Brush-Top Can | 2 min. | 24 hrs. | Not Rated | Thin Liquid | 1,200 | -30° to 150° | Clear | Copper, Fabric, Foam, Rubber, Steel, Wood | __ | 000000 | 00000 |
__ | 16 fl. oz. | Brush-Top Can | 2 min. | 24 hrs. | Not Rated | Thin Liquid | 1,200 | -30° to 150° | Clear | Copper, Fabric, Foam, Rubber, Steel, Wood | __ | 000000 | 00000 |
__ | 16 fl. oz. | Brush-Top Can | 3 min. | 36 hrs. | Not Rated | Thick Liquid | Not Rated | -40° to 250° | Black | Foam, Masonry, Metal, Plastic, Rubber | __ | 00000000 | 00000 |
__ | 32 fl. oz. | Brush-Top Can | 2 min. | 24 hrs. | Not Rated | Thin Liquid | 1,200 | -30° to 150° | Clear | Copper, Fabric, Foam, Rubber, Steel, Wood | Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA | 000000 | 00000 |
__ | 1 gal. | Can | 2 min. | 24 hrs. | Not Rated | Thin Liquid | 1,200 | -30° to 150° | Clear | Copper, Fabric, Foam, Rubber, Steel, Wood | Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA | 000000 | 000000 |
Quick-Set Contact Adhesives

Bonds reach full strength in 10 minutes. Apply this adhesive to one or both surfaces, then bring together to bond. For nonporous surfaces, air dry before bonding.
Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, gal. | Type | Begins to Harden | Reaches Full Strength | Shear Strength, lbs./sq. in. | Consistency | Viscosity, cP | Temp. Range, °F | For Joining | Color | Each | |
3M Adhesives | ||||||||||||
1000NF | 1 | Jug | 60 sec. | 10 min. | 400 | Thin Liquid | 750 | 60° to 80° | Fabric, Foam, Wood | Purple | 00000000 | 0000000 |
Nonflammable Contact Adhesives

Bond porous materials with these low-odor, nonflammable adhesives. Apply to both surfaces, air dry, and then bring together to bond.
Container | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Size | Type | Begins to Harden | Reaches Full Strength | Shear Strength | Consistency | Viscosity | Temp. Range, °F | Color | For Joining | Each | |
Weldwood Adhesives | |||||||||||
32 fl. oz. | Can | 30 min. | 72 hrs. | Not Rated | Thick Liquid | Not Rated | -40° to 180° | Amber | Cardboard, Composites, Fabric, Wood | 0000000 | 000000 |
1 gal. | Can | 30 min. | 72 hrs. | Not Rated | Thick Liquid | Not Rated | -40° to 180° | Amber | Cardboard, Composites, Fabric, Wood | 0000000 | 00000 |
Construction Adhesives for Flooring

Bond carpeting, vinyl tile, and other floor coverings to subfloors with these water-resistant adhesives.
Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size | Type | Approximate Coverage | Begins to Harden | Reaches Full Strength | Shear | Peel | Consistency | Temp. Range, °F | Color | For Use Outdoors | For Joining | Each | |
1 gal. | Pail | 33 sq. ft. @ 1/8" bead | 15 min. | 24 hrs. | Not Rated | Not Rated | Thick Liquid | 65° to 85° | Beige | No | Plastic, Wood | 00000000 | 000000 |
Construction Adhesives for Stair Treads

Install treads on concrete and wood stairs with this strong, water-resistant adhesive.
Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, gal. | Type | Approximate Coverage | Begins to Harden | Reaches Full Strength | Shear | Peel | Consistency | Temp. Range, °F | Color | For Use Outdoors | For Joining | Each | |
1 | Pail | 150 sq. ft. @ 1/16" bead | 15 min. | 24 hrs. | Not Rated | Not Rated | Paste | 55° to 85° | White | No | Masonry, Plastic, Rubber, Wood | 00000000 | 000000 |
Construction Adhesives for Nosing

Bond and repair nosing and stair treads with this thick two-part epoxy. The size listed is the combined total of the two parts.
Adhesive | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Container | Strength | Dispensing Gun | ||||||||||||||
Size, fl. oz. | Type | Approximate Coverage | Begins to Harden | Reaches Full Strength | Shear | Peel | Mix Ratio | Consistency | Temp. Range, °F | Color | For Use Outdoors | For Joining | Each | Each | ||
13.5 | Cartridge | 50 ft. @ 1/4" dia. bead | 45 min. | 24 hrs. | Not Rated | Not Rated | 1:1 | Paste | 65° to 85° | Beige/Gray | No | Masonry, Plastic, Rubber | 00000000 | 000000 | 0000000 | 0000000 |
Primers for Pipe Cement for Plastic Pipe
Surface Fillers



These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces. The size listed is the combined total of the two parts.
Devcon Aluminum Liquid, Devcon Aluminum Putty, and Devcon FasMetal™ 10 HVAC Repair form a nonrusting finish.
Container | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size | Net Weight | Type | Begins to Harden, min. | Reaches Full Strength | Consistency | Mix Ratio | Approx. Coverage @ Thick. | Temp. Range, °F | Color | Finishing Method | For Use On | Pkg. Qty. | Pkg. | |
Loctite® Fixmaster Epoxy | |||||||||||||||
EA 445 | __ | 0.12 oz. | Mixer Cup | 5 | 12 hrs. | Thick Liquid | 1:1 | 1 sq. in. @ 1/4" | -65° to 180° | Gray | Machine, Sand, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS Plastic, CPVC Plastic, PETG Plastic, Polycarbonate Plastic, Polyimide Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, PVDF Plastic, Ceramic, Concrete, Glass, Wood | 10 | 0000000 | 000000 |
EA 445 | __ | 1 oz. | Mixer Cup | 5 | 12 hrs. | Thick Liquid | 1:1 | 1 sq. in. @ 1/4" | -65° to 180° | Gray | Machine, Sand, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS Plastic, CPVC Plastic, PETG Plastic, Polycarbonate Plastic, Polyimide Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, PVDF Plastic, Ceramic, Concrete, Glass, Wood | 10 | 0000000 | 000000 |
EA 9131 | __ | 0.12 oz. | Mixer Cup | 90 | 24 hrs. | Thick Liquid | 1.5:1 | 1 sq. in. @ 1/4" | -65° to 180° | White | Machine, Sand, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS Plastic, CPVC Plastic, PETG Plastic, Polycarbonate Plastic, Polyimide Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, PVDF Plastic, Ceramic, Concrete, Glass, Wood | 10 | 0000000 | 00000 |
Each | |||||||||||||||
Devcon Aluminum Liquid | |||||||||||||||
10710 | __ | 1 lbs. | Jar | 75 | 16 hrs. | Thick Liquid | 9:1 | 70 sq. in. @ 1/4" | -40° to 250° | Aluminum | Machine, Drill, Sand, Saw, Tap | Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood | __ | 00000000 | 000000 |
10720 | __ | 3 lbs. | Jar | 75 | 16 hrs. | Thick Liquid | 9:1 | 210 sq. in. @ 1/4" | -40° to 250° | Aluminum | Machine, Drill, Sand, Saw, Tap | Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood | __ | 00000000 | 000000 |
Devcon Aluminum Putty | |||||||||||||||
10610 | __ | 1 lbs. | Jar | 60 | 16 hrs. | Putty | 9:1 | 70 sq. in. @ 1/4" | -40° to 250° | Aluminum | Machine, Drill, Sand, Saw, Tap | Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood | __ | 00000000 | 000000 |
10620 | __ | 3 lbs. | Jar | 60 | 16 hrs. | Putty | 9:1 | 210 sq. in. @ 1/4" | -40° to 250° | Aluminum | Machine, Drill, Sand, Saw, Tap | Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood | __ | 00000000 | 000000 |
Devcon FasMetal™ 10 HVAC Repair | |||||||||||||||
19770 | 6.5 fl. oz. | __ | Tube | 60 | 16 hrs. | Paste | 1:1 | 30 sq. in. @ 1/4" | -40° to 250° | Aluminum | Machine, Drill, Sand, Saw, Tap | Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood | __ | 00000000 | 00000 |
Light-Activated Surface Filler Pens
These surface fillers come in a pen for precision application. After applying, use the LED on the back of the pen to instantly cure. They can be used with most types of metal as well as ceramic, stone, and porcelain.

Formulation | Container Size, fl. oz. | Begins to Harden, sec. | Reaches Full Strength, sec. | Consistency | For Use Outdoors | Temp. Range, °F | Color | Finishing Method | For Use On | Batteries Included | Each | |
Acrylic | 0.2 | 3 | 12 | Gel | Yes | 0° to 245° | Clear | Drill, Sand | Aluminum, Brass, Copper, Steel, Stainless Steel, Galvanized Iron, Galvanized Steel, Ceramic, Porcelain, Stone | Yes | 000000 | 000000 |
Coolant-Resistant Surface Fillers

Repair small leaks and cracks in coolant systems for commercial vehicles and industrial equipment. These surface fillers meet ASTM D3147 for their ability to stop leaks in engine cooling systems. Pour them into your coolant to fix both internal and external leaks. They contain ceramic microfibers and copper particles to create a permanent seal. They’re compatible with antifreeze and other coolant system additives.
Container | |||||||||
---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, min. | Consistency | Temp. Range, °F | Color | For Use On | Each | |
16 | Jug | 7 | 10 | Thick Liquid | Not Rated to 500° | Brown | Aluminum, Brass, Bronze, Copper, Silver, Steel, Stainless Steel, Galvanized Steel, Galvanized Iron, Titanium, Acrylic Plastic, Polystyrene Plastic, Polycarbonate Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Nylon Plastic, PTFE Plastic, Polyethylene Plastic, Polypropylene Plastic | 0000000 | 000000 |
Fuel-Resistant Surface Fillers

Also known as sloshing compounds, these two-part epoxies bond to rough and rusty surfaces in fuel tanks to repair leaks and prevent further corrosion. They withstand permanent immersion in fuel, oil, and harsh solvents. Use them with metal, plastic, and fiberglass tanks. Mix the smaller can with the bigger one and pour into your fuel tank. Rotate the tank to coat the interior and dump out any excess. Allow to cure overnight. Size listed is the combined total of the two parts.
1.5-pint container can treat a 10-gallon fuel tank. 3-pint container can treat a 20-gallon fuel tank.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, pt. | Type | Begins to Harden, min. | Reaches Full Strength, hrs. | Consistency | Mix Ratio | For Use Outdoors | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
1.5 | Can | 5 | 24 | Thick Liquid | 2:1 | No | 70° to 90° | Amber | Drill, Sand, Tap | Aluminum, Brass, Bronze, Copper, Silver, Steel, Stainless Steel, Cast Iron, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, Polycarbonate Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Nylon Plastic, Polyethylene Plastic, Polypropylene Plastic, Vinyl Plastic, Fiberglass, Ceramic, Porcelain | 0000000 | 000000 |
3 | Can | 5 | 24 | Thick Liquid | 2:1 | No | 70° to 90° | Amber | Drill, Sand, Tap | Aluminum, Brass, Bronze, Copper, Silver, Steel, Stainless Steel, Cast Iron, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, Polycarbonate Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Nylon Plastic, Polyethylene Plastic, Polypropylene Plastic, Vinyl Plastic, Fiberglass, Ceramic, Porcelain | 0000000 | 00000 |
Grout

Used on ceramic, concrete, and stone floor and wall tiles, grout consists of fine sand, masonry cement, and coloring. Apply with a grout float.
Acrylic grout does not require mixing. It resists shrinking, cracking, and staining.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, gal. | Type | Reaches Full Strength | Consistency | For Max. Crack Wd. | Approximate Coverage @ Thick. | Max. Thick. | For Use Outdoors | Application Temp. Range, °F | Color | For Use On | Each | |
Acrylic | ||||||||||||
1 | Pail | 24 hrs. | Paste | 1/2" | 101 sq. ft. @ 1/4" | 1/2" | No | 50° to 100° | Beige | Concrete, Plaster, Ceramic, Porcelain, Grout, Masonry, Asphalt, Stone | 00000000 | 000000 |
1 | Pail | 24 hrs. | Paste | 1/2" | 101 sq. ft. @ 1/4" | 1/2" | No | 50° to 100° | Gray | Concrete, Plaster, Ceramic, Porcelain, Grout, Masonry, Asphalt, Stone | 00000000 | 00000 |
1 | Pail | 24 hrs. | Paste | 1/2" | 101 sq. ft. @ 1/4" | 1/2" | No | 50° to 100° | White | Concrete, Plaster, Ceramic, Porcelain, Grout, Masonry, Asphalt, Stone | 00000000 | 00000 |
Surface Fillers for Vinyl Fabric

Mend rips, tears, and holes on vinyl surfaces, such as awnings and upholstery, with these flexible, waterproof surface fillers. They cannot be sold to regions outside the United States due to product labeling requirements.
Container | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Consistency | Begins to Harden, min. | Reaches Full Strength, hrs. | Temp. Range, °F | Color | For Use Outdoors | For Use On | Cannot Be Sold To | Each | |
1 | Tube | Thin Liquid | 30 | 4 | -10° to 200° | Clear | Yes | Vinyl Fabric | Outside United States | 0000000 | 000000 |
Roof Patching Compounds

Repair holes and seal gaps in roofing and gutters. These patching compounds are durable and water resistant.
Apply acrylic compounds to dry surfaces.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, gal. | Type | Consistency | Begins to Harden | Reaches Full Strength | Approximate Coverage @ Thick. | Max. Thick. | Application Temp. Range, °F | Color | For Use Outdoors | For Use On | Each | |
Acrylic Compounds | ||||||||||||
1 | Can | Thick Liquid | 4 hrs. | 24 hrs. | 12 sq. ft. @ 1/8" | 1/4" | 50° to 90° | White | Yes | Aluminum, Copper, Steel, Stainless Steel, Masonry, Stone, Asphalt, Wood | 00000000 | 000000 |
Thick High-Temperature Gasketing Adhesives

Seal fiberglass gaskets into stove doors as well as seals cracks in metal.
Container | |||||||||
---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, hrs. | Heating Requirements to Reach Full Strength | Max. Temp., °F | Color | For Use On | Each | |
2.3 | Tube | 60 | 3 | 1 hr. air dry then 2 hrs. @ 500° F | 2000° | Black | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Fiberglass, Masonry | 0000000 | 00000 |
Thick High-Temperature Gasketing Adhesives in Cartridges

The adhesive seals fiberglass gaskets into stove doors as well as seals cracks in metal. Use the cartridge with a standard caulk gun for quick and easy dispensing.
Container Size, fl. oz. | Begins to Harden, min. | Reaches Full Strength, hrs. | Heating Requirements to Reach Full Strength | Max. Temp., °F | Color | For Use On | Each | |
10.3 | 60 | 3 | 1 hr. air dry then 2 hrs. @ 500° F | 2000° | Black | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Fiberglass, Masonry | 0000000 | 000000 |
Thin High-Temperature Gasketing Adhesives in Cartridges

The adhesive is easy flowing for bonding fiberglass gaskets to cast iron and steel. Use the cartridge with a standard caulk gun for quick and easy dispensing.
Container Size, fl. oz. | Begins to Harden, min. | Reaches Full Strength, hrs. | Heating Requirements to Reach Full Strength | Max. Temp., °F | Color | For Use On | Each | |
10.3 | 60 | 3 | 1 hr. air dry then 2 hrs. @ 500° F | 2000° | Black | Steel, Cast Iron, Fiberglass | 0000000 | 000000 |
Thin High-Temperature Gasketing Adhesives

This adhesive is easy flowing for bonding fiberglass gaskets to cast iron and steel.
Container | |||||||||
---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, hrs. | Heating Requirements to Reach Full Strength | Max. Temp., °F | Color | For Use On | Each | |
2.3 | Tube | 60 | 3 | 1 hr. air dry then 2 hrs. @ 500° F | 2000° | Black | Steel, Cast Iron, Fiberglass | 0000000 | 00000 |
Surface-Preparation Cleaners for Pipe Cement for Plastic Pipe

Use these cleaners on PVC, CPVC, and ABS pipe to remove dirt and degrease surfaces.
Container | ||||||||
---|---|---|---|---|---|---|---|---|
Type | Size, fl. oz. | Composition | Harshness | For Use On | For Removing | Primary Chemical | Each | |
Liquid | ||||||||
Brush-Top Can | 8 | Solvent Based | Harsh | Plastic, Vinyl | Dirt, Grease/Oil, Wax | Acetone (75-95%) | 00000000 | 00000 |
Brush-Top Can | 16 | Solvent Based | Harsh | Plastic, Vinyl | Dirt, Grease/Oil, Wax | Acetone (75-95%) | 00000000 | 00000 |
Brush-Top Can | 32 | Solvent Based | Harsh | Plastic, Vinyl | Dirt, Grease/Oil, Wax | Acetone (75-95%) | 00000000 | 00000 |