This general purpose tubing is the industry standard for air and water applications.

Lightweight, spongy walls provide thermal insulation, so this tubing won’t produce condensation when cold air or fluid runs through it.

An internal reinforcement gives this tubing the strength to handle high-pressure applications up to 350 psi.

Typically used in applications requiring movement, such as metering (peristaltic) pumps and robotics, this tubing can handle repeated bending and flexing.

Lighter than other plastic and rubber tubing, but extremely tough, this tubing stands up to the wear and tear of daily use.

Tough and durable, this tubing resists abrasion and tearing.

Sized for vibrating sifters, screeners, hoppers, and packaging equipment, this tubing has a diameter of 4" or larger to handle a variety of bulk food processing applications.

Strong, yet pliable, this tubing is good for gradual bends and can handle repeated flexing.

With hard walls and the ability to handle extreme temperatures, this tubing is the preferred material for semiconductor applications. The material contains extremely low levels of additives, so it won’t contaminate the fluid passing through it.

Tubing meets NSF/ANSI Standard 61 for drinking water.

Minimize leaks in your line—these fittings have a single barb that creates a smooth clamping surface for extra-tight connections.

Made of stainless steel, these fittings are more durable than plastic barbed tube fittings for food and beverage.

Made of FDA listed materials, these fittings have a single barb that creates a smooth clamping surface for extra-tight connections.

Also known as instant fittings, these connect to tubing with a push, and an internal gripping ring and O-ring hold the tubing tight. Use in applications up to 150 psi.

Made of PVDF (also known as Kynar), these fittings have excellent strength and can handle temperatures as high as 240° F or 270° F.

Use these nuts with high-temperature compression fittings for food and beverage to create a seal on plastic tubing.

These plastic compression fittings meet NSF/ANSI Standard 51 for food contact.

Connect tubing in sanitary food processing areas with frequent washdowns. They have a single sleeve (ferrule) that bites into hard metal and plastic tubing to make a seal—no heating, flaring, or soldering tools required.

These fittings keep their strength in moist environments and meet NSF/ANSI 61 for drinking water. Also known as instant fittings.

Create a push-to-connect junction in equipment with these fittings. To install, drill a stepped hole in your surface, push the fitting components into place, then insert your tubing.

Connect these fittings to tubing with a ring and a crimping tool (both sold separately). Safe to use with drinking water, these fittings meet the strict standards of NSF/ANSI 61.

Connect stainless steel tubing on one end and plastic tubing on the other end.

Crimp these fittings to copper tubing with a crimping tool for a leak-tight connection that doesn’t require heat or soldering. They are comparable to Viega ProPress fittings.

Made of plastic, these fittings are lightweight compared to our brass push-to-connect fittings.

Certified to meet NSF/ANSI 61, this hose is safe for use in drinking water systems.

Pull water out of wells, tanks, and other drinking water sources through lines connected by cam-and-groove fittings.

Warm viscous food and beverages, such as syrup and honey, to keep it flowing even when the temperature drops.

Suction, transfer, and dispense wet food and beverages with up to 99% alcohol concentrations.

Transfer flour, grain, rice, sugar, and other dry food through lines connected by cam-and-groove fittings.

Fittings meet NSF/ANSI Standard 61 for drinking water. Attach them to garden hose for a variety of water supply applications. They are metal for better durability than plastic garden hose fittings.

Couplings are made of FDA listed materials, so they’re suitable for food and beverage applications and won’t impart tastes or odors to the product. They consist of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. To connect, insert the plug into the socket and push the levers down.

These couplings are compatible with International Standard ISO Series B-shape plugs and sockets. They are FDA compliant, so they’re suitable for food and beverage applications and won’t impart tastes or odors to the product. They consist of a plug and a socket that connect and disconnect quickly so you can frequently access your line. Use at pressures up to 220 psi.

Connect this pipe to standard-wall plastic pipe fittings for a variety of residential and commercial low-pressure plumbing and water supply applications.

Connect to thick-wall plastic pipe fittings for use in heavy duty industrial plumbing and water supply applications, such as water processing, waste water treatment, and irrigation. Pipe can handle pressures up to 900 psi.

Connect to barbed plastic pipe fittings with a clamp. Pipe isn't as bendable as soft tubing, but can still bend around objects, resulting in fewer connection points in your line. Fewer connection points not only shortens installation time, but also allows for smoother flow through the line.

With thicker, stronger walls than standard-wall pipe, this Schedule 80 pipe can handle heavy duty industrial plumbing and water supply applications, such as water processing, waste water treatment, and irrigation. Use for pressures up to 550 psi. Suitable for outdoor environments, it contains an additive that protects against the damaging effects of ultraviolet light. Connect to UV-resistant PVC pipe fittings.

Surrounded by a protective plastic spiral, this hose bounces back to its original shape when stepped on and resists wear from being dragged across rough floors.

Tough both inside and out, this durable polyurethane hose has a metal spiral that acts as a wear strip to protect against damage.

Cast acrylic is easier to machine than extruded acrylic. It's comparable to Lucite and Plexiglas® Acrylic.

PETG can be formed into complex shapes without sacrificing durability.

The addition of PTFE provides a more slippery, wear-resistant surface than standard Delrin® acetal resin. It’s commonly fabricated into pump components, gears, and bearings.

Also known as nylon 6/6, this general purpose material is often used for bearings, gears, valve seats, and other high-wear parts.

In addition to a low-friction surface that prevents sticking and binding, this tough material is impact and wear resistant to handle the scuffs, scrapes, and strikes that other plastics can’t.

Protect cables, cords, and wire and form them into bundles in your food-processing plant while lowering the risk of contaminating the food.