Move milk, syrup, meat, and other wet-food and drink products through lines connected by cam-and-groove fittings.

Warm viscous food and beverages, such as syrup and honey, to keep it flowing even when the temperature drops.

Suction, transfer, and dispense wet food and beverages with up to 99% alcohol concentrations.

Transfer flour, grain, rice, sugar, and other dry food through lines connected by cam-and-groove fittings.

Although only half the weight, this hose resists wear and tear 240 times better than our standard rubber hydraulic hose. It comes with female threaded fittings already attached, so it’s ready to use right out of the box.

Although only half the weight, this hose resists wear and tear 240 times better than our standard rubber hydraulic hose.

There’s no shut-off valve on these nozzles, so water instantly flows.

Lightweight yet tough, this hose has an abrasion-resistant polyester cover.

To transfer air or oil- and water-based paints, attach this hose to a paint-spray system that has separate hoses for air and paint. Fittings swivel until tightened for easy installation. Fittings with spring guards prevent kinking.

Each hose is a different color so you can differentiate your lines.

Quickly set up a line to dispense chemicals—these nozzles come with a hose and fittings that thread onto your drum or intermediate bulk container (IBC).

Wind your garden hose around these reels to keep it neat and organized.

Minimize leaks in your line—these fittings have a single barb that creates a smooth clamping surface for extra-tight connections.

Barbs grip onto tubing.

Aluminum fittings have good corrosion resistance, but are lighter in weight than brass.

The nickel plating on these fittings provides better corrosion resistance than unplated brass fittings.

Made of stainless steel, these fittings have better corrosion resistance than brass fittings.

You don't need a clamp to secure these fittings to tubing. They have a nut on the barbed end that tightens to hold the tubing in place.

A built-in shut-off valve stops airflow when the fittings are disconnected from tubing.

Made of nickel-plated brass, these tube fittings resist corrosion better than plain brass fittings. The male threaded ends connect to NPT, NPTF, BSPP, BSPT, and other universal threads, so you don’t have to bother matching exact thread types.

Made of brass, these fittings have good corrosion resistance.

A 316 stainless steel body gives these fittings the best corrosion resistance of all our metal push-to-connect tube fittings.

These fittings won’t absorb moisture, so they’re good for water and high-humidity air applications.

Connect air brake lines with fittings that won’t crack in sub-zero temperatures. They meet Department of Transportation FMVSS 571 safety standards, so they’re often used in commercial trucks and trailers.

Made of EPDM, the gasket on these fittings stands up to the hot water found in heat exchangers and cooling systems. These fittings have stainless steel pipe threads, which are more durable than the plastic pipe threads found on other push-to-connect tube fittings.

An all-metal body and built-in tube support or dual seals allow these fittings to handle the highest pressure ratings of all our push-to-connect tube fittings.

Made of brass, these couplings are more durable than plastic couplings.

With no latch, these couplings have a compact design to fit in small spaces. They can handle pressures up to 700 psi.

Prevent mixing the wrong high-pressure lines—these couplings are designed to only connect with a plug or socket of the same color.

Don’t get your lines crossed—use one of these couplings to quickly connect or disconnect multiple tubes at once.

Use these luer lock couplings to quickly connect low-pressure air and water lines. Made of stainless steel, they’re more durable than plastic couplings.

A built-in shut-off valve stops the flow when you separate these couplings, so air or water won’t leak from your line. Made of nylon, these couplings are lightweight and have good impact and abrasion resistance.

A built-in tube support slips inside the tubing to prevent collapsing and provides a sturdy connection for an extra-tight seal.

These fittings include a nut with a built-in sleeve (ferrule), so there’s no need to remove the nut for assembly.

Lighter in weight than their metal counterparts, these compression fittings are polypropylene.

Tube supports slip inside tubing to prevent the walls from collapsing.

Create a push-to-connect junction in equipment with these fittings. To install, drill a stepped hole in your surface, push the fitting components into place, then insert your tubing.

Use these nuts with brass compression fittings to create a seal on plastic tubing. They meet NSF/ANSI 61 for use with drinking water.

Fittings withstand temperatures up to 220° F.

Made of FDA listed materials, these fittings have a single barb that creates a smooth clamping surface for extra-tight connections.

These quick-disconnect couplings mate with a sanitary stainless steel quick-clamp fitting for use in dairy lines.

Connect hot food and beverage lines with just a push. Also known as instant fittings, they have an internal gripping ring and an O-ring that hold tight to tubing.

Create corrosion-resistant connections in food and beverage lines with just a push. Also known as instant fittings, these fittings have an internal gripping ring and an O-ring that hold tight to tubing.

Connect tubing in sanitary food processing areas with frequent washdowns. They have a single sleeve (ferrule) that bites into hard metal and plastic tubing to make a seal—no heating, flaring, or soldering tools required.

Quick-disconnect couplings consist of a plug and a socket that join with a latch so you can easily connect and disconnect your line.

Also known as instant fittings, these chemical-resistant plastic fittings connect to tubing with a push. An internal gripping ring holds the tubing tight.

Fittings have a sleeve that bites into tubing as you tighten the nut to form a seal in applications up to 120 psi. Also known as flareless fittings.