Push-On Retaining Caps
Use these caps to hold components in place and protect shaft ends. Install these caps with a hammer or push them into place by hand.
| For OD | OD | Ht. | Insert Material | Min. Hardness | Temperature Range, °F | Magnetic Properties | Pkg. Qty. | Pkg. | |
Black Plastic | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 5/32" | 21/32" | 23/64" | Steel | Rockwell C45 | -90° to 150° | Magnetic | 50 | 000000000 | 000000 |
| 3/16" | 21/32" | 23/64" | Steel | Rockwell C45 | -90° to 150° | Magnetic | 50 | 000000000 | 00000 |
| 1/4" | 27/32" | 23/64" | Steel | Rockwell C45 | -90° to 150° | Magnetic | 50 | 000000000 | 00000 |
| 5/16" | 27/32" | 29/64" | Steel | Rockwell C45 | -90° to 150° | Magnetic | 25 | 000000000 | 00000 |
| 3/8" | 55/64" | 15/32" | Steel | Rockwell C45 | -90° to 150° | Magnetic | 25 | 000000000 | 0000 |
| 7/16" | 53/64" | 7/16" | Steel | Rockwell C45 | -90° to 150° | Magnetic | 10 | 000000000 | 0000 |
| 1/2" | 1 5/16" | 41/64" | Steel | Rockwell C45 | -90° to 150° | Magnetic | 10 | 000000000 | 0000 |
| 5/8" | 1 5/16" | 41/64" | Steel | Rockwell C45 | -90° to 150° | Magnetic | 10 | 000000000 | 0000 |
White Plastic | |||||||||
| 1/8" | 21/32" | 23/64" | Steel | Rockwell C45 | -90° to 150° | Magnetic | 10 | 000000000 | 00000 |
| 3/16" | 21/32" | 11/32" | Steel | Rockwell C45 | -90° to 150° | Magnetic | 25 | 000000000 | 0000 |
| 3/8" | 55/64" | 15/32" | Steel | Rockwell C45 | -90° to 150° | Magnetic | 25 | 000000000 | 0000 |
Red Plastic | |||||||||
| 5/16" | 55/64" | 15/32" | Steel | Rockwell C45 | -90° to 150° | Magnetic | 25 | 000000000 | 0000 |
One-Piece Socket Retaining Rings
The pin on these retainers is permanently connected to the ring, so they're less likely to dislodge when used with an impact wrench compared to two-piece retaining rings. Use them to secure impact sockets and adapters to a tool that has a hole- or a ring-and-hole style retainer. Rings for 3/4" square drive and larger have a crush gauge on the pin that deforms when sockets become worn and need to be replaced.
| ID | Material | Pkg. Qty. | Pkg. | |
For 3/8" Square Drive | ||||
|---|---|---|---|---|
| 5/8" | Polyurethane Plastic | 5 | 0000000 | 00000 |
| 11/16" | Polyurethane Plastic | 5 | 0000000 | 0000 |
| 3/4" | Polyurethane Plastic | 5 | 0000000 | 0000 |
| 13/16" | Polyurethane Plastic | 5 | 0000000 | 0000 |
| 15/16" | Polyurethane Plastic | 5 | 0000000 | 0000 |
| 1 1/8" | Polyurethane Plastic | 5 | 0000000 | 0000 |
| 1 3/16" | Polyurethane Plastic | 5 | 0000000 | 0000 |
For 1/2" Square Drive | ||||
| 13/16" | Polyurethane Plastic | 5 | 0000000 | 0000 |
| 7/8" | Polyurethane Plastic | 5 | 0000000 | 0000 |
| 15/16" | Polyurethane Plastic | 5 | 0000000 | 0000 |
| 1 1/16" | Polyurethane Plastic | 5 | 0000000 | 0000 |
| 1 3/16" | Polyurethane Plastic | 5 | 0000000 | 0000 |
| 1 5/16" | Polyurethane Plastic | 5 | 0000000 | 0000 |
| 1 7/16" | Polyurethane Plastic | 5 | 0000000 | 0000 |
| 1 5/8" | Polyurethane Plastic | 5 | 0000000 | 0000 |
| Each | ||||
For 3/4" Square Drive | ||||
| 1 1/4" | Polyurethane Plastic | __ | 0000000 | 0000 |
| 1 7/16" | Polyurethane Plastic | __ | 0000000 | 0000 |
| 1 5/8" | Polyurethane Plastic | __ | 0000000 | 0000 |
| 1 3/4" | Polyurethane Plastic | __ | 00000000 | 0000 |
| 2" | Polyurethane Plastic | __ | 00000000 | 0000 |
| 2 1/8" | Polyurethane Plastic | __ | 00000000 | 0000 |
| 2 1/4" | Polyurethane Plastic | __ | 00000000 | 0000 |
For 1" Square Drive | ||||
| 1 3/4" | Polyurethane Plastic | __ | 0000000 | 0000 |
| 2" | Polyurethane Plastic | __ | 00000000 | 0000 |
| 2 1/8" | Polyurethane Plastic | __ | 0000000 | 0000 |
| 2 1/4" | Polyurethane Plastic | __ | 00000000 | 0000 |
| 2 1/2" | Polyurethane Plastic | __ | 00000000 | 0000 |
| 2 5/8" | Polyurethane Plastic | __ | 00000000 | 0000 |
| 3 1/8" | Polyurethane Plastic | __ | 00000000 | 0000 |
For 1 1/2" Square Drive | ||||
| 2 7/8" | Polyurethane Plastic | __ | 0000000 | 0000 |
| 3 3/8" | Polyurethane Plastic | __ | 00000000 | 0000 |
| 3 7/8" | Polyurethane Plastic | __ | 00000000 | 0000 |
| 4 3/8" | Polyurethane Plastic | __ | 00000000 | 0000 |
Stretch-Fit One-Piece Socket Retaining Rings
Stock fewer sizes of retaining rings—these stretch to fit a range of socket diameters. They have a retaining pin to secure your impact sockets and adapters to a tool that has a hole- or ring-and-hole-style retainer. A crush gauge on the pin deforms when the socket becomes worn and needs to be replaced. You can reuse these rings, but only on the same size or larger socket.