In addition to a low-friction surface that prevents sticking and binding, this tough material is impact and wear resistant to handle the scuffs, scrapes, and strikes that other plastics can’t.

This material suppresses static charges to prevent dust from building up.

The addition of carbon gives this material the ability to divert static electricity faster than antistatic UHMW.

Prolonged outdoor exposure won’t discolor or degrade VHMW.

Compared to our standard UHMW polyethylene, these sheets and bars hold up better to scuffs and scrapes in high-speed, high-precision, and high-impact applications—such as conveyor equipment, chute liners, and machine guards. Also known as Tivar HPV.

This oil-filled material is self-lubricating for an extra-slippery surface.

Practically nonabsorbent, HDPE won't swell when exposed to moisture. It is denser and more rigid than LDPE, plus it's more chemical resistant.

Also known as pipe-grade HDPE, these sheets are about four times more impact resistant than standard HDPE and hold up outdoors, and in wet environments.

The addition of PTFE provides a more slippery, wear-resistant surface than standard Delrin® acetal resin. It’s commonly fabricated into pump components, gears, and bearings.

An economical alternative to Delrin® acetal resin, this acetal copolymer offers similar wear resistance.

This material prevents the buildup of static charges.

Because PVC resists many acids and alkalies, it’s widely used for tanks and in chemical-processing applications. Also known as PVC Type 1.

Offering greater impact resistance than standard PVC Type 1 with similar chemical resistance, this PVC Type 2 is widely used for parts that are subject to shock.

Create signs and partitions with this easy to cut PVC foam.

Because ABS maintains its toughness even after thermoforming, it’s often made into storage cases, tote trays, equipment housings, and protective gear.

Also known as nylon 6/6, this general purpose material is often used for bearings, gears, valve seats, and other high-wear parts.

Designed for extreme wear resistance, this Kevlar-filled nylon 6/6 material lasts up to 20 times longer than unfilled nylon. Also known as Hydlar Z, it is often used for parts that are continuously exposed to wear and abrasion, such as wear strips and bushings.

Because this 6/12 material absorbs less water than standard nylon 6/6, it holds its shape better. It’s often machined into hose fittings and valve components.

Often used to make gears and wear strips, these cast nylon 6 sheets and bars withstand higher temperatures and are easier to machine than standard nylon 6/6 sheets and bars.

This nylon stays lubricated over time because it’s filled with oil. Use it to fabricate parts for hard-to-reach places where adding lubricants would be difficult.

Package food, textiles, and other products in wet environments. This film won’t absorb or swell from water.

Widely used in semiconductor applications, this polypropylene meets UL flame-retardance standards.

Often used for packaging and construction applications, this film is also known as Visqueen.

A layer of soft LDPE is sandwiched between two thin layers of aluminum for strength and rigidity.

Known for its electrical insulating properties, this polystyrene is often used for cable connectors, electrical housings, and in microwave applications. It is also known as Rexolite.

The addition of glass fibers to this polycarbonate increases tensile strength for use in structural applications.

An aluminum coating on one side of this film reflects heat, so it’s widely used as an insulator and in packaging applications.

These black polyester sheets protect from UV rays better than off-white polyester. Strong and semi-rigid, they won't swell in moist environments, so they're often made into pump components and spacers.

Known for its naturally slippery surface, PTFE surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures.

Known for its naturally slippery surface, PTFE surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures.

This glass-filled PTFE is more rigid than standard PTFE for increased durability in high-stress applications.

Filled with carbon and graphite, this naturally slippery PTFE stands up to wear better than standard PTFE.

Kapton® polyimide film is an excellent electrical insulator.

Because this film dissipates heat, it is often used for printed circuit boards and power supplies.

Not only does PEEK provide superior wear resistance in repetitive processes, it is also resists wear caused by abrasion. PEEK can be used as a lightweight substitute for metal parts in chemical-processing applications.

Common in food and pharmaceutical plants, these PEEK bars help you identify contaminated batches.

Often used for circuit-breaker housings, manifolds, and semiconductor components, Ultem PEI offers excellent electrical-insulating properties.

Among the strongest plastic materials we offer, Torlon PAI has a slippery surface that resists wear. Use it to make high-friction compressor parts, bearings, and seals.

Just as chemical resistant as PTFE, yet FEP offers greater impact strength. Use it to make valve components and gaskets.

Stronger than PTFE, PVDF offers good chemical resistance. Comparable to Kynar and Solef, it’s widely used for pump parts, tank liners, and seals.

When excellent chemical resistance is combined with an ability to hold tight tolerances, the result is PPS—a material that’s widely machined into parts for chemical-processing applications. It is comparable to Techtron and Ryton.

A static-dissipative coating on this cast acrylic prevents electrostatic discharge from damaging sensitive electronic equipment.

This extruded acrylic offers similar performance as cast acrylic at a lower cost.

Modified for increased impact strength over other types of acrylic, this acrylic is often used for skylights and outdoor signs.

At only half the weight of glass, polycarbonate maintains excellent impact resistance across a wide temperature range. It's comparable to Lexan, Hyzod, Tuffak, and Makrolon.

Enhanced UV resistance makes this polycarbonate better than standard polycarbonate for outdoor use.

Often used in security doors and windows to protect against forced entry, this laminated polycarbonate is nearly impenetrable.

Carbon mesh is embedded into this clear PVC film to dissipate electrostatic discharge and protect sensitive electronic equipment.

Because PVC resists acids and alkalies, it is often used in tanks and chemical-processing applications where visibility is essential.

The slippery surface on this FEP film prevents sticking. Use it as a release film when making molded parts.

Stronger and more chemical resistant than FEP and PFA film, ETFE film resists cracking over time.

A static-dissipative coating on this polyester film prevents electrostatic discharge from damaging sensitive electronic equipment.

Also called acetate, this is the same clear film that's used in window envelopes.

Each selector pack includes one 2” square of FEP, polypropylene, PPS, PVC, CPVC, PVDF, and Teflon® PTFE.

One 2” square of PEEK, PFA, polyimide, Torlon PAI, and Ultem PEI is included in these selector packs.

Mirrored polycarbonate resists damage caused by impact.

With a coating that reduces static electricity , these sheets are good for use in solder pallets, automated test equipment, electronic assembly workstations, and other applications where static buildup could damage your equipment.

These Garolite CE sheets and bars are often fabricated into parts where high strength is not required.

Offering higher strength and better heat resistance than Garolite G-10/FR4, Garolite G-11 is suitable for continuous use in elevated temperatures.

Often used for terminal boards, electrical housings, end plates, and structural components in high temperatures, these sheets are a flame-retardant version of Garolite G-11. All are stronger and resist heat better than Garolite G-10/FR4.

Garolite G-7 withstands temperatures up to 425° F—higher than any other grade of Garolite. While not as strong as Garolite G-9 sheets, these sheets and bars offer better arc resistance in dry environments and a higher level of electrical insulation.

Use Garolite G-10 in place of Garolite G-10/FR4 for applications that are sensitive to halogen, such as in nuclear plants. It's strong, machinable, and electrically insulating.

Frequently called electrical-grade Garolite, this Garolite G-9 is strong, electrically insulating, and arc resistant in dry environments.

An alternative to wood in structural applications, FRP fiberglass is strong and lightweight.

Made with a flame-retardant resin, this FRP fiberglass meets ASTM E84 Class A.

This FRP fiberglass is made with a chemical-resistant resin that stands up to harsh environments.

Layers of fibers alternating in four directions makes this carbon fiber stiff at the corners and edges, so it stands up to twisting forces.

Almost as stiff as steel and a fraction of the weight, these carbon fiber sheets are often used for structural framing, machinery components, and robotics.

As a strong, lightweight, and buoyant alternative to solid panels, these aramid honeycomb cores are used to make interior wall panels and floor boards in marine, structural, and industrial applications.

Made of recycled steel mill scale and reground plastic, these sheets are a sustainable, low-cost alternative to standard composites often used as counterweights, such as lead and steel.

Hard fiber is the easiest composite to machine, making it good for creating custom parts. Also known as vulcanized fiber.

Each pack includes one 2" circle of GPO3 fiberglass and Garolite XX, XXX, CE, LE, G-3, G-7, G-9, G-10, and G-11.

Use these resin-free fabrics to reinforce or repair existing composites as well as create new composites. Mold custom-shaped composite parts by layering your choice of fabric with an epoxy.

Keep shim stock in a variety of thicknesses on hand with these sets, which are color coded by thickness for easy identification. Cut them into custom shapes to fit your application.

Cut this shim stock into custom shapes to fit your application. Stock is made of layers of material bonded with adhesive; remove layers with a utility knife until you get the thickness you need.

The textured surface of these thick shims keeps them from sliding apart when stacked. Use them to align cabinets, doors, and windows, or for other rough leveling.

Made of FDA-listed materials, these polyethylene foam sheets are often used as packaging for food products to absorb shock and damp vibration.

There are hundreds of cushioning pillows in every foot of these pliable mesh sheets. They're often used as a protective liner in drawers and cabinets and anywhere a nonskid surface is required.

Protect electronic components from electrostatic shocks and chemicals while safeguarding them from bumps and drops during shipping and storing.

An economical alternative to Viton® fluoroelastomer foam, these semi-rigid nylon foam sheets offer good resistance to a wide range of chemicals.

In addition to being lighter in weight than silicone foam, this polyimide foam also remains soft and conformable across a broader temperature range.