These cast acrylic sheets are often fabricated into tanks, see-through barrier panels, and light fixture lenses. Cast acrylic, which is comparable to Lucite and Plexiglas® acrylic, is easier to machine than extruded acrylic. The material is scratch resistant and stands up to outdoor use better than polycarbonate. It maintains clarity over time and won't weaken from exposure to UV, though the pigment in colored acrylic will fade over time when exposed to direct sunlight.

The most commonly used 3D printing material, these PLA filaments make detailed parts at a low melting point, so they won’t warp as they cool, rarely clog nozzles, and don’t require a heated printer bed. They’re also unlikely to drip and produce plastic strings for a clean finished part. In general, they’re best for printing prototypes instead of load-bearing parts since they’re not as strong as ABS or as heat resistant as PEEK. Print them on a fused filament fabrication (FFF) 3D printer.

Filaments with an annealing temperature can be heat treated to make parts harder, stronger, and better at resisting heat. To anneal, heat your finished part to the listed temperature and then let it cool slowly.

Maximum exposure temperature is the point at which a printed part will begin to deform. Above this temperature, your part will start to lose structural integrity. Filaments that can be annealed are also rated for maximum temperature after annealing, which is the new maximum exposure temperature once that process completes.