Also known as permanent lifting magnets, these magnets hold a load until you pull the handle and pry the magnet off. They have a lifting eye for attaching a hook or sling.

Style B magnets have a nonmarring roller release that prevents scraping and gouging the load as it is released.

Note: Capacities listed are based on lifting flat metal that has a clean, smooth surface. If used on dirty, oily, thin, or curved surfaces, the capacities will be reduced.

Warning: Never use to lift people or items over people.

For technical drawings and 3-D models, click on a part number.

Slide steel plates and blocks off a stack.

Easily grab iron and steel fasteners, small sheets, and other parts from work areas, bins, and hard-to-reach places.

Style J has an easy-grip handle. Slide-on shields let you cover the magnet when not in use.

Styles K and L have a lifting eye for attaching a hook, rope, or chain to lower magnets into hard-to-reach spaces.

Styles M and N are also known as blueprint holders.

Warning: Never use to lift people or items over people.

Pull iron metal scrap and particles out of your process line as it moves through chutes and hoppers. Mount flush with the surface of your container; position below the flow of material.

Direct-mount filters bolt directly to chutes and hoppers. Can also be installed up to 3” above conveyor belts.

Hinged-mount filters provide access to clean the magnetic surface. You can also mount as a door on chutes and hoppers.

For technical drawings and 3-D models, click on a part number.

The entire surface of these plates is magnetic to provide a powerful hold for grinding, drilling, and electrical discharge machining (EDM). They’re useful when clamps would interfere with your process and when there aren’t any convenient spots for clamping material. Pull the handle to switch the magnets on and off. Use the mounting clamps to secure the plate to your machine table and the removable back and side rails to keep your workpiece in position. Plates are sealed against dirt and liquid so they can be submerged in oil baths. They are not recommended for processes where workpieces are submerged in water.

Fine magnetic pole spacing provides the best hold on small or thin (1/4" or less) parts.

Standard magnetic pole spacing is suitable for most applications. It will provide the best grip on large or thick parts.

Plates with fine and standard magnetic pole spacing have more than twice the holding power of other plates. Use them with large and small parts.

For technical drawings and 3-D models, click on a part number.