Filter by
Bracket Type
T-Slotted Framing Component
Surface Bracket Style
Material
Corner Bracket Style
Single Rail Profile Style
Concealed Bracket Style
Mounting Fastener Nut Style
Export Control Classification Number (ECCN)
DFARS Specialty Metals
REACH
Architectural 6063 Aluminum Bars with Rounded Edges
- Yield Strength: 16,000 psi
- Hardness: Brinell 55 (Soft)
- Temper: T5
- Fabrication: Extruded
- Specifications Met: ASTM B221
More corrosion resistant and easier to form than multipurpose 6061 aluminum, 6063 is primarily used for exterior railings, decorative trim, and door frames.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
| Wd. | Heat Treatment | Temperature Range, °F | Flatness Tolerance | 3 ft. Lg. | 6 ft. Lg. | |
1/16" Thick. (-0.006" to 0.006" Tolerance) | ||||||
|---|---|---|---|---|---|---|
| 1/2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 1" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 1 1/2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
3/32" Thick. (-0.006" to 0.006" Tolerance) | ||||||
| 1/2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 3/4" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
1/8" Thick. (-0.007" to 0.007" Tolerance) | ||||||
| 1/4" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 5/8" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 1" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 1 1/2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 2 1/2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
3/16" Thick. (-0.007" to 0.007" Tolerance) | ||||||
| 1/2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 1" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
1/4" Thick. (-0.008" to 0.008" Tolerance) | ||||||
| 1/4" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 1/2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 3/4" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 1" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 1 1/2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
3/8" Thick. (-0.008" to 0.008" Tolerance) | ||||||
| 3/8" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 5/8" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 3/4" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 1" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 1 1/2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
7/16" Thick. (-0.008" to 0.008" Tolerance) | ||||||
| 7/16" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 3/4" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
1/2" Thick. (-0.009" to 0.009" Tolerance) | ||||||
| 1/2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 1" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 1 1/2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
5/8" Thick. (-0.009" to 0.009" Tolerance) | ||||||
| 5/8" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 1" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
3/4" Thick. (-0.01" to 0.01" Tolerance) | ||||||
| 3/4" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 1" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 1 1/2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 1 3/4" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
1" Thick. (-0.012" to 0.012" Tolerance) | ||||||
| 1" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 1 1/2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
Architectural 6063 Aluminum Bars
- Yield Strength: 16,000 psi
- Hardness: Brinell 55 (Soft)
- Temper: T5
- Fabrication: Extruded
- Specifications Met: ASTM B221
More corrosion resistant and easier to form than multipurpose 6061 aluminum, 6063 is primarily used for exterior railings, decorative trim, and door frames.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
| Wd. | Heat Treatment | Temperature Range, °F | Flatness Tolerance | 4 ft. Lg. | 8 ft. Lg. | 12 ft. Lg. | |
1/8" Thick. (-0.007" to 0.007" Tolerance) | |||||||
|---|---|---|---|---|---|---|---|
| 1/4" | Hardened | -320° to 212° | 0.006" per in. of width | 000000000 | |||
| 1/2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 5/8" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 3/4" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 1" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 1 1/4" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 1 1/2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 2 1/2" | Hardened | -320° to 212° | 0.006" per in. of width | 000000000 | |||
3/16" Thick. (-0.007" to 0.007" Tolerance) | |||||||
| 1/2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 3/4" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 1" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 1 1/4" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 1 1/2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
1/4" Thick. (-0.008" to 0.008" Tolerance) | |||||||
| 1/4" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 1/2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 5/8" | Hardened | -320° to 212° | 0.006" per in. of width | 000000000 | |||
| 3/4" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 1" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 1 1/4" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 1 1/2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 1 3/4" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 2 1/2" | Hardened | -320° to 212° | 0.006" per in. of width | 000000000 | |||
3/8" Thick. (-0.008" to 0.008" Tolerance) | |||||||
| 3/8" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 1/2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 5/8" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 3/4" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 1" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 1 1/4" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 1 1/2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
1/2" Thick. (-0.009" to 0.009" Tolerance) | |||||||
| 1/2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 3/4" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 1" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 1 1/4" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 1 1/2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
5/8" Thick. (-0.009" to 0.009" Tolerance) | |||||||
| 5/8" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 1" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 1 1/4" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 1 1/2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
3/4" Thick. (-0.009" to 0.009" Tolerance) | |||||||
| 3/4" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 1" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 1 1/2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 1 3/4" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
7/8" Thick. (-0.01" to 0.01" Tolerance) | |||||||
| 7/8" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 1" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
1" Thick. (-0.012" to 0.012" Tolerance) | |||||||
| 1" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 1 1/4" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 1 1/2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 1 3/4" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
T-Slotted Framing Structural Brackets
Connect T-slotted rails and reinforce joints for structural stability. Fasteners are included.
Corner Brackets for Single Rails
Corner
Extended Corner
Slotted Corner
Extended Slotted Corner
Open Gusset
Extended Open Gusset
Closed Gusset
Quick-Install Closed Gusset
Extended Quick-Install Closed Gusset
Corner brackets are also known as angle brackets.
Extended brackets have more connection points for stronger connections than standard-length brackets.
Slotted corner brackets have elongated mounting holes for increased adjustability.
Gusset brackets are reinforced to limit sway for more structural stability than standard corner brackets. Open gusset brackets give you easy access to the fasteners, which is useful if your application requires frequent adjustments. Closed gusset brackets include a cover for a finished appearance and better dust protection than open gusset brackets. Quick-install closed gusset brackets come with mounting fasteners attached to make installation easy. To install, drop the attached nuts into the T-slot, then tighten the screws a quarter turn. They come with a cover for a finished appearance.
| For Rail Ht. | Lg. | Rail Machining | Mounting Fasteners Included | Material | Each | |
Silver | ||||||
|---|---|---|---|---|---|---|
Corner | ||||||
| 1" | 1" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
| 1 1/2" | 1 1/2" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 0000 |
| 20mm | 3/4" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 0000 |
| 25mm | 63/64" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 0000 |
| 30mm | 1 1/8" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 0000 |
| 40mm | 1 5/8" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 0000 |
| 45mm, 60mm | 1 3/4" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 0000 |
Extended Corner | ||||||
| 1" | 2" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 0000 |
| 1 1/2" | 3" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 0000 |
| 20mm | 1 5/8" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 0000 |
| 25mm | 1 31/32" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 30mm | 2 3/8" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 0000 |
| 40mm | 3 1/8" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 0000 |
| 45mm, 60mm | 3 1/2" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 0000 |
Slotted Corner | ||||||
| 1" | 1" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 0000 |
| 1 1/2" | 1 1/2" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 0000 |
| 25mm | 63/64" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 0000 |
| 40mm | 1 9/16" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 0000 |
Extended Slotted Corner | ||||||
| 1" | 1" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 1 1/2" | 1 1/2" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 40mm | 1 9/16" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
Open Gusset | ||||||
| 1" | 1" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 0000 |
| 1 1/2" | 1 1/2" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
| 20mm | 51/64" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 0000 |
| 25mm | 63/64" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 0000 |
| 30mm | 1 3/16" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 0000 |
| 40mm | 1 37/64" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 0000 |
| 45mm, 60mm | 1 49/64" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 0000 |
Extended Open Gusset | ||||||
| 1" | 2" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
| 1 1/2" | 3" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
| 20mm | 1 5/8" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 0000 |
| 25mm | 1 31/32" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 30mm | 2 3/8" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 40mm | 3 1/8" | Not Required | Yes | Anodized 6063 Aluminum | 0000000 | 00000 |
| 45mm, 60mm | 3 1/2" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
Closed Gusset | ||||||
| 1 1/2", 40mm | 1 27/64" | Not Required | Yes | 6063 Aluminum | 0000000 | 0000 |
| 20mm | 23/32" | Not Required | Yes | 6063 Aluminum | 0000000 | 0000 |
| 30mm | 1 1/16" | Not Required | Yes | 6063 Aluminum | 00000000 | 0000 |
| 45mm, 60mm | 1 39/64" | Not Required | Yes | 6063 Aluminum | 00000000 | 0000 |
Quick-Install Closed Gusset | ||||||
| 1 1/2", 40mm | 1 37/64" | Not Required | Yes | Powder-Coated 6063 Aluminum | 00000000 | 0000 |
Extended Quick-Install Closed Gusset | ||||||
| 1 1/2", 40mm | 3 5/32" | Not Required | Yes | Powder-Coated 6063 Aluminum | 00000000 | 00000 |
Black | ||||||
Corner | ||||||
| 1" | 1" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 0000 |
| 1 1/2" | 1 1/2" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
| 20mm | 3/4" | Not Required | Yes | Powder-Coated 6063 Aluminum | 00000000 | 0000 |
| 25mm | 63/64" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 0000 |
| 30mm | 1 1/8" | Not Required | Yes | Powder-Coated 6063 Aluminum | 00000000 | 0000 |
| 40mm | 1 5/8" | Not Required | Yes | Powder-Coated 6063 Aluminum | 00000000 | 0000 |
| 45mm, 60mm | 1 3/4" | Not Required | Yes | Powder-Coated 6063 Aluminum | 00000000 | 0000 |
Extended Corner | ||||||
| 1" | 2" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
| 1 1/2" | 3" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
| 20mm | 1 5/8" | Not Required | Yes | Powder-Coated 6063 Aluminum | 00000000 | 0000 |
| 25mm | 1 31/32" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 30mm | 2 3/8" | Not Required | Yes | Powder-Coated 6063 Aluminum | 00000000 | 0000 |
| 40mm | 3 1/8" | Not Required | Yes | Powder-Coated 6063 Aluminum | 00000000 | 0000 |
| 45mm, 60mm | 3 1/2" | Not Required | Yes | Powder-Coated 6063 Aluminum | 00000000 | 0000 |
Slotted Corner | ||||||
| 1" | 1" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
| 1 1/2" | 1 1/2" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
| 40mm | 1 37/64" | Not Required | Yes | Anodized 6063 Aluminum | 0000000 | 00000 |
Extended Slotted Corner | ||||||
| 1" | 1" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
| 1 1/2" | 1 1/2" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
Open Gusset | ||||||
| 1" | 1" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
| 1 1/2" | 1 1/2" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
| 20mm | 51/64" | Not Required | Yes | Powder-Coated 6063 Aluminum | 00000000 | 0000 |
| 25mm | 63/64" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 30mm | 1 3/16" | Not Required | Yes | Powder-Coated 6063 Aluminum | 00000000 | 0000 |
| 40mm | 1 37/64" | Not Required | Yes | Powder-Coated 6063 Aluminum | 00000000 | 0000 |
| 45mm, 60mm | 1 49/64" | Not Required | Yes | Powder-Coated 6063 Aluminum | 00000000 | 0000 |
Extended Open Gusset | ||||||
| 1" | 2" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
| 1 1/2" | 3" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
| 20mm | 1 37/64" | Not Required | Yes | Powder-Coated 6063 Aluminum | 0000000 | 00000 |
| 30mm | 2 23/64" | Not Required | Yes | Powder-Coated 6063 Aluminum | 0000000 | 00000 |
| 40mm | 3 1/8" | Not Required | Yes | Powder-Coated 6063 Aluminum | 00000000 | 00000 |
Corner Brackets for Double and Quad Rails
Corner
Extended Corner
Open Gusset
Extended Open Gusset
Extended Closed Gusset
Corner brackets are also known as angle brackets.
Extended brackets have more connection points for stronger connections than standard-length brackets.
Gusset brackets are reinforced to limit sway for more structural stability than standard corner brackets. Open gusset brackets give you easy access to the fasteners, which is useful if your application requires frequent adjustments. Closed gusset brackets include a cover for a finished appearance and better dust protection than open gusset brackets.
| For Rail Ht. | Lg. | Rail Machining | Mounting Fasteners Included | Mounting Hole Style | Material | Each | |
Silver | |||||||
|---|---|---|---|---|---|---|---|
Corner | |||||||
| 2" | 1" | Not Required | Yes | __ | Anodized 6063 Aluminum | 000000000 | 000000 |
| 3" | 1 1/2" | Not Required | Yes | __ | Anodized 6063 Aluminum | 000000000 | 00000 |
| 40mm | 3/4" | Not Required | Yes | __ | Anodized 6063 Aluminum | 00000000 | 0000 |
| 50mm | 63/64" | Not Required | Yes | __ | Anodized 6063 Aluminum | 00000000 | 00000 |
| 60mm | 1 1/8" | Not Required | Yes | __ | Anodized 6063 Aluminum | 00000000 | 0000 |
| 80mm | 1 5/8" | Not Required | Yes | __ | Anodized 6063 Aluminum | 00000000 | 00000 |
| 90mm | 1 3/4" | Not Required | Yes | __ | Anodized 6063 Aluminum | 00000000 | 00000 |
Extended Corner | |||||||
| 2" | 2" | Not Required | Yes | __ | Anodized 6063 Aluminum | 000000000 | 00000 |
| 3" | 3" | Not Required | Yes | __ | Anodized 6063 Aluminum | 000000000 | 00000 |
| 40mm | 1 5/8" | Not Required | Yes | __ | Anodized 6063 Aluminum | 00000000 | 00000 |
| 50mm | 63/64" | Not Required | Yes | Slotted | Anodized 6063 Aluminum | 00000000 | 00000 |
| 50mm | 1 31/32" | Not Required | Yes | __ | Anodized 6063 Aluminum | 00000000 | 00000 |
| 60mm | 2 3/8" | Not Required | Yes | __ | Anodized 6063 Aluminum | 00000000 | 00000 |
| 80mm | 3 1/8" | Not Required | Yes | __ | Anodized 6063 Aluminum | 00000000 | 00000 |
| 90mm | 3 1/2" | Not Required | Yes | __ | Anodized 6063 Aluminum | 00000000 | 00000 |
Open Gusset | |||||||
| 2" | 1" | Not Required | Yes | __ | Anodized 6063 Aluminum | 000000000 | 00000 |
| 3" | 1 1/2" | Not Required | Yes | __ | Anodized 6063 Aluminum | 000000000 | 00000 |
| 20mm | 51/64" | Not Required | Yes | __ | Anodized 6063 Aluminum | 00000000 | 00000 |
| 30mm | 1 3/16" | Not Required | Yes | __ | Anodized 6063 Aluminum | 00000000 | 00000 |
| 40mm | 1 37/64" | Not Required | Yes | __ | Anodized 6063 Aluminum | 00000000 | 00000 |
| 45mm | 1 49/64" | Not Required | Yes | __ | Anodized 6063 Aluminum | 00000000 | 00000 |
Extended Open Gusset | |||||||
| 2" | 2" | Not Required | Yes | __ | Anodized 6063 Aluminum | 000000000 | 00000 |
| 3" | 3" | Not Required | Yes | __ | Anodized 6063 Aluminum | 000000000 | 00000 |
| 50mm | 1 31/32" | Not Required | Yes | __ | Anodized 6063 Aluminum | 00000000 | 00000 |
| 60mm | 2 3/8" | Not Required | Yes | __ | Anodized 6063 Aluminum | 00000000 | 00000 |
| 80mm | 3 1/8" | Not Required | Yes | __ | Anodized 6063 Aluminum | 000000 | 00000 |
| 90mm | 3 1/2" | Not Required | Yes | __ | Anodized 6063 Aluminum | 00000000 | 00000 |
Extended Closed Gusset | |||||||
| 3" | 3" | Not Required | Yes | __ | 6063 Aluminum | 00000000 | 00000 |
| 40mm | 1 27/64" | Not Required | Yes | __ | 6063 Aluminum | 00000000 | 00000 |
| 80mm | 3" | Not Required | Yes | __ | 6063 Aluminum | 00000000 | 00000 |
| 90mm | 3 25/64" | Not Required | Yes | __ | 6063 Aluminum | 00000000 | 00000 |
Black | |||||||
Corner | |||||||
| 2" | 1" | Not Required | Yes | __ | Anodized 6063 Aluminum | 000000000 | 00000 |
| 3" | 1 1/2" | Not Required | Yes | __ | Anodized 6063 Aluminum | 000000000 | 00000 |
| 40mm | 3/4" | Not Required | Yes | __ | Powder-Coated 6063 Aluminum | 00000000 | 0000 |
| 50mm | 63/64" | Not Required | Yes | __ | Anodized 6063 Aluminum | 00000000 | 00000 |
| 60mm | 1 1/8" | Not Required | Yes | __ | Powder-Coated 6063 Aluminum | 00000000 | 0000 |
| 80mm | 1 5/8" | Not Required | Yes | __ | Powder-Coated 6063 Aluminum | 0000000 | 00000 |
| 90mm | 1 3/4" | Not Required | Yes | __ | Powder-Coated 6063 Aluminum | 00000000 | 00000 |
Extended Corner | |||||||
| 2" | 2" | Not Required | Yes | __ | Anodized 6063 Aluminum | 000000000 | 00000 |
| 3" | 3" | Not Required | Yes | __ | Anodized 6063 Aluminum | 000000000 | 00000 |
| 40mm | 1 5/8" | Not Required | Yes | __ | Powder-Coated 6063 Aluminum | 0000000 | 00000 |
| 50mm | 1 31/32" | Not Required | Yes | __ | Anodized 6063 Aluminum | 00000000 | 00000 |
| 60mm | 2 3/8" | Not Required | Yes | __ | Powder-Coated 6063 Aluminum | 00000000 | 00000 |
| 80mm | 1 37/64" | Not Required | Yes | Slotted | Anodized 6063 Aluminum | 0000000 | 00000 |
| 80mm | 3 1/8" | Not Required | Yes | __ | Powder-Coated 6063 Aluminum | 000000 | 00000 |
| 90mm | 3 1/2" | Not Required | Yes | __ | Powder-Coated 6063 Aluminum | 00000000 | 00000 |
Open Gusset | |||||||
| 2" | 1" | Not Required | Yes | __ | Anodized 6063 Aluminum | 00000000 | 00000 |
| 3" | 1 1/2" | Not Required | Yes | __ | Anodized 6063 Aluminum | 00000000 | 00000 |
| 40mm | 1 37/64" | Not Required | Yes | __ | Anodized 6063 Aluminum | 0000000 | 00000 |
Extended Open Gusset | |||||||
| 2" | 2" | Not Required | Yes | __ | Anodized 6063 Aluminum | 00000000 | 00000 |
| 3" | 3" | Not Required | Yes | __ | Anodized 6063 Aluminum | 00000000 | 00000 |
| 50mm | 1 31/32" | Not Required | Yes | __ | Anodized 6063 Aluminum | 00000000 | 00000 |
| 60mm | 2 3/8" | Not Required | Yes | __ | Anodized 6063 Aluminum | 0000000 | 00000 |
| 80mm | 3 5/32" | Not Required | Yes | __ | Anodized 6063 Aluminum | 0000000 | 00000 |
Corner Brackets for Triple Rails
Corner
Extended Corner
Corner brackets are also known as angle brackets.
Extended brackets have more connection points for stronger connections than standard-length brackets.
| For Rail Ht. | Lg. | Color | Material | Rail Machining | Mounting Fasteners Included | Each | |
Corner | |||||||
|---|---|---|---|---|---|---|---|
| 3" | 1" | Silver | Anodized 6063 Aluminum | Not Required | Yes | 00000000 | 000000 |
| 3" | 1" | Black | Anodized 6063 Aluminum | Not Required | Yes | 0000000 | 00000 |
| 4 1/2" | 1 1/2" | Silver | Anodized 6063 Aluminum | Not Required | Yes | 00000000 | 00000 |
Extended Corner | |||||||
| 3" | 3" | Silver | Anodized 6063 Aluminum | Not Required | Yes | 00000000 | 00000 |
| 4 1/2" | 4 1/2" | Silver | Anodized 6063 Aluminum | Not Required | Yes | 00000000 | 00000 |
Outside Corner Brackets for Single Rails
Outside Corner Bracket for Four Slot Rails
Three-Way Outside Corner Bracket for Radius Two-Slot Rails
Three-Way Outside Corner Bracket for Four Slot Rails
Corner brackets are also known as angle brackets.
Outside corner and three-way outside corner brackets connect the ends of rails for a finished look at your corner. To install, tap the existing hole in the end of each rail and screw the bracket in. Brackets with no required tap thread size include thread-forming screws.
| For Rail Ht. | Lg. | Color | Material | Required Tap Thread Size | Rail Machining | Mounting Fasteners Included | Each | |
Outside Corner for Four Slot Single Rails | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1" | 1" | Silver | Lacquer-Coated 6063 Aluminum | 1/4"-20 | Required | Yes | 000000000 | 00000 |
| 1 1/2" | 1 1/2" | Silver | Lacquer-Coated 6063 Aluminum | M8 | Required | Yes | 000000000 | 0000 |
| 20mm | 3/4" | Silver | Lacquer-Coated 6063 Aluminum | M5 | Required | Yes | 00000000 | 0000 |
| 30mm | 1 1/8" | Silver | Lacquer-Coated 6063 Aluminum | __ | Not Required | Yes | 00000000 | 0000 |
| 40mm | 1 5/8" | Silver | Lacquer-Coated 6063 Aluminum | M8 | Required | Yes | 00000000 | 0000 |
| 45mm | 1 3/4" | Silver | Lacquer-Coated 6063 Aluminum | M12 | Required | Yes | 00000000 | 00000 |
Three-Way Outside Corner for Radius Two Slot Single Rails | ||||||||
| 1" | 1" | Silver | Anodized 6063 Aluminum | 1/4"-20 | Required | Yes | 00000000 | 00000 |
| 1 1/2" | 1 1/2" | Silver | Anodized 6063 Aluminum | 5/16"-18 | Required | Yes | 00000000 | 00000 |
Three-Way Outside Corner for Four Slot Single Rails | ||||||||
| 1" | 1" | Silver | Lacquer-Coated 6063 Aluminum | 1/4"-20 | Required | Yes | 000000000 | 00000 |
| 1 1/2" | 1 1/2" | Silver | Lacquer-Coated 6063 Aluminum | M8 | Required | Yes | 000000000 | 00000 |
| 20mm | 3/4" | Silver | Lacquer-Coated 6063 Aluminum | M5 | Required | Yes | 00000000 | 00000 |
| 30mm | 1 1/8" | Silver | Lacquer-Coated 6063 Aluminum | __ | Not Required | Yes | 00000000 | 00000 |
| 40mm | 1 5/8" | Silver | Lacquer-Coated 6063 Aluminum | M8 | Required | Yes | 00000000 | 00000 |
| 45mm | 1 3/4" | Silver | Lacquer-Coated 6063 Aluminum | M12 | Required | Yes | 00000000 | 00000 |
Corner Adapter Brackets
Left Side Adapter Bracket for Double/Quad to Single Rails
Right Side Adapter Bracket for Double/Quad to Single Rails
Center Adapter Bracket for Double/Quad to Single Rails
Center Adapter Bracket for Triple to Double/Quad Rails
Corner brackets are also known as angle brackets.
Adapter brackets connect rails with different rail profiles.
| For Rail Ht. | Lg. | Color | Material | Rail Machining | Mounting Fasteners Included | Each | |
Left Side Adapter Bracket for Double/Quad to Single Rails | |||||||
|---|---|---|---|---|---|---|---|
| 1" | 2" | Silver | Anodized 6063 Aluminum | Not Required | Yes | 00000000 | 000000 |
| 1 1/2" | 3" | Silver | Anodized 6063 Aluminum | Not Required | Yes | 00000000 | 00000 |
Right Side Adapter Bracket for Double/Quad to Single Rails | |||||||
| 1" | 2" | Silver | Anodized 6063 Aluminum | Not Required | Yes | 00000000 | 00000 |
| 1 1/2" | 3" | Silver | Anodized 6063 Aluminum | Not Required | Yes | 00000000 | 00000 |
Center Adapter Bracket for Double/Quad to Single Rails | |||||||
| 1" | 2" | Silver | Anodized 6063 Aluminum | Not Required | Yes | 00000000 | 00000 |
| 1 1/2" | 3" | Silver | Anodized 6063 Aluminum | Not Required | Yes | 00000000 | 00000 |
| 40mm | 3 5/32" | Silver | Anodized 6063 Aluminum | Not Required | Yes | 00000000 | 00000 |
Center Adapter Bracket for Triple to Double/Quad Rails | |||||||
| 1" | 2" | Silver | Anodized 6063 Aluminum | Not Required | Yes | 00000000 | 00000 |
| 1 1/2" | 3" | Silver | Anodized 6063 Aluminum | Not Required | Yes | 00000000 | 00000 |
Surface Brackets for Single Rails
Straight
15° Angle
30° Angle
45° Angle
60° Angle
90° Angle
Extended 90° Angle
Cross
Tee
Flush Tee
Flush 90° Angle
Extended Straight
Surface brackets create strong connection points because they secure to the surface of rails.
Straight brackets are simple brackets that can be used to make 90°, end-to-end, and parallel connections.
Extended brackets have more connection points for stronger connections than standard-length brackets.
15° angle brackets connect rails at a slight angle, so they are often used to create sloped shelves.
90° angle brackets make a corner or create another 90° connection along your rail.
Flush tee and flush 90° angle brackets create a finished appearance. However, they are not as strong as standard tee or 90° angle brackets.
| For Rail Ht. | Lg. | Rail Machining | Mounting Fasteners Included | Material | Each | |
Silver | ||||||
|---|---|---|---|---|---|---|
Straight | ||||||
| 1", 25mm | 1 31/32" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 1", 25mm | 2" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 0000 |
| 1 1/2", 40mm | 3" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 0000 |
| 20mm | 1 1/2" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 0000 |
| 30mm | 2 1/4" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 0000 |
| 40mm | 3" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 0000 |
| 45mm, 60mm | 3 3/8" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 0000 |
Extended Straight | ||||||
| 1" | 4" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
| 1 1/2" | 6" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
| 1", 25mm | 3 15/16" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 20mm | 3" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 30mm | 4 5/8" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 40mm | 6 1/8" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 45mm, 60mm | 6 7/8" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
15° Angle | ||||||
| 1" | 2 1/4" | Not Required | Yes | Anodized 6063 Aluminum | 0000000 | 00000 |
| 1 1/2" | 3 1/2" | Not Required | Yes | Anodized 6063 Aluminum | 0000000 | 00000 |
| 40mm | 3 11/16" | Not Required | Yes | Anodized 6063 Aluminum | 0000000 | 00000 |
30° Angle | ||||||
| 1" | 2 1/2" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 1 1/2" | 3 1/2" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 40mm | 3 5/8" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
45° Angle | ||||||
| 1" | 2 3/4" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
| 1 1/2" | 4 1/2" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
| 40mm | 4 3/4" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
60° Angle | ||||||
| 1" | 3" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
| 1 1/2" | 4 1/2" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
| 40mm | 4 3/4" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
90° Angle | ||||||
| 1" | 3" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
| 1 1/2" | 4 1/2" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
| 20mm | 2 3/8" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 25mm | 2 15/16" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 30mm | 3 1/2" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 40mm | 4 5/8" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 45mm | 5 1/4" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
Extended 90° Angle | ||||||
| 1" | 4" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 1 1/2" | 6" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 25mm | 3 15/16" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 40mm | 6 5/16" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 45mm | 5 5/16" | Not Required | Yes | Anodized 6063 Aluminum | 0000000 | 00000 |
Cross | ||||||
| 1" | 5" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 1 1/2" | 7 1/2" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 25mm | 4 15/16" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 40mm | 7 7/8" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 45mm, 60mm | 8 7/8" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
Tee | ||||||
| 1" | 4" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 1 1/2" | 6" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 1", 25mm | 3" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
| 1 1/2", 40mm | 4 1/2" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
| 20mm | 2 1/4" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 25mm | 3 15/16" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 30mm | 3 3/8" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 40mm | 4 5/8" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 45mm, 60mm | 5 1/8" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
Flush Tee | ||||||
| 1" | 3" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 1 1/2" | 4 1/2" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 20mm | 2 3/8" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 25mm | 2 15/16" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 30mm | 3 9/16" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 40mm | 4 3/4" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 45mm, 60mm | 5 5/16" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
Flush 90° Angle | ||||||
| 1" | 3" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 1 1/2" | 4 1/2" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 20mm | 2 3/8" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 25mm | 2 15/16" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 30mm | 3 9/16" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 40mm | 4 3/4" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 45mm | 5 5/16" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
Black | ||||||
Straight | ||||||
| 1", 25mm | 2" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
| 1 1/2", 40mm | 3" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
| 20mm | 1 1/2" | Not Required | Yes | Powder-Coated 6063 Aluminum | 00000000 | 0000 |
| 25mm | 1 31/32" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 30mm | 2 1/4" | Not Required | Yes | Powder-Coated 6063 Aluminum | 00000000 | 0000 |
| 40mm | 3" | Not Required | Yes | Powder-Coated 6063 Aluminum | 00000000 | 0000 |
| 45mm, 60mm | 3 3/8" | Not Required | Yes | Powder-Coated 6063 Aluminum | 00000000 | 0000 |
Extended Straight | ||||||
| 1" | 4" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
| 1 1/2" | 6" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
| 20mm | 3" | Not Required | Yes | Powder-Coated 6063 Aluminum | 00000000 | 00000 |
| 25mm | 3 15/16" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 30mm | 4 5/8" | Not Required | Yes | Powder-Coated 6063 Aluminum | 00000000 | 00000 |
| 40mm | 6 1/8" | Not Required | Yes | Powder-Coated 6063 Aluminum | 00000000 | 00000 |
| 45mm, 60mm | 6 7/8" | Not Required | Yes | Powder-Coated 6063 Aluminum | 00000000 | 00000 |
15° Angle | ||||||
| 1" | 2 1/4" | Not Required | Yes | Anodized 6063 Aluminum | 0000000 | 00000 |
| 1 1/2" | 3 1/2" | Not Required | Yes | Anodized 6063 Aluminum | 0000000 | 00000 |
| 40mm | 3 11/16" | Not Required | Yes | Anodized 6063 Aluminum | 0000000 | 00000 |
30° Angle | ||||||
| 1" | 2 1/2" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
| 1 1/2" | 3 1/2" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
45° Angle | ||||||
| 1" | 2 3/4" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 1 1/2" | 4 1/2" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
60° Angle | ||||||
| 1" | 3" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
| 1 1/2" | 4 1/2" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
90° Angle | ||||||
| 1" | 3" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
| 1 1/2" | 4 1/2" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
| 20mm | 2 3/8" | Not Required | Yes | Powder-Coated 6063 Aluminum | 00000000 | 00000 |
| 25mm | 2 15/16" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 30mm | 3 1/2" | Not Required | Yes | Powder-Coated 6063 Aluminum | 00000000 | 00000 |
| 40mm | 4 5/8" | Not Required | Yes | Powder-Coated 6063 Aluminum | 00000000 | 00000 |
| 45mm | 5 1/4" | Not Required | Yes | Powder-Coated 6063 Aluminum | 00000000 | 00000 |
Extended 90° Angle | ||||||
| 1" | 4" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
| 1 1/2" | 6" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
| 40mm | 6 5/16" | Not Required | Yes | Anodized 6063 Aluminum | 0000000 | 00000 |
| 45mm | 5 5/16" | Not Required | Yes | Anodized 6063 Aluminum | 0000000 | 00000 |
Cross | ||||||
| 1 1/2" | 7 1/2" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
| 1", 25mm | 5" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
Tee | ||||||
| 1 1/2" | 6" | Not Required | Yes | Anodized 6063 Aluminum | 0000000 | 00000 |
| 1", 25mm | 3" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
| 1 1/2", 40mm | 4 1/2" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
| 20mm | 2 1/4" | Not Required | Yes | Powder-Coated 6063 Aluminum | 00000000 | 00000 |
| 25mm | 3 15/16" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 30mm | 3 3/8" | Not Required | Yes | Powder-Coated 6063 Aluminum | 00000000 | 00000 |
| 40mm | 4 5/8" | Not Required | Yes | Powder-Coated 6063 Aluminum | 00000000 | 00000 |
| 45mm, 60mm | 5 1/8" | Not Required | Yes | Powder-Coated 6063 Aluminum | 00000000 | 00000 |
Flush Tee | ||||||
| 1" | 3" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
| 1 1/2" | 4 1/2" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
| 40mm | 4 3/4" | Not Required | Yes | Anodized 6063 Aluminum | 0000000 | 00000 |
Flush 90° Angle | ||||||
| 1" | 3" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
| 1 1/2" | 4 1/2" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
| 40mm | 4 3/4" | Not Required | Yes | Anodized 6063 Aluminum | 0000000 | 00000 |
| 45mm, 60mm | 5 5/16" | Not Required | Yes | Anodized 6063 Aluminum | 0000000 | 00000 |
Yellow | ||||||
Straight | ||||||
| 1", 25mm | 2" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 0000 |
| 1 1/2", 40mm | 3" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 0000 |
90° Angle | ||||||
| 1" | 3" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 1 1/2" | 4 1/2" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
Tee | ||||||
| 1", 25mm | 3" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 1 1/2", 40mm | 4 1/2" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
Surface Brackets for Double and Quad Rails
Straight
Extended Straight
90° Angle
Tee
Cross
Surface brackets create strong connection points because they secure to the surface of rails.
Straight brackets are simple brackets that can be used to make 90°, end-to-end, and parallel connections.
Extended brackets have more connection points for stronger connections than standard-length brackets.
90° angle brackets make a corner or create another 90° connection along your rail.
| For Rail Ht. | Lg. | Rail Machining | Mounting Fasteners Included | Material | Each | |
Silver | ||||||
|---|---|---|---|---|---|---|
Straight | ||||||
| 2" | 2" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 000000 |
| 3" | 3" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
| 40mm | 1 1/2" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 50mm | 1 31/32" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 60mm | 2 1/4" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 80mm | 3" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 90mm | 3 3/8" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
Extended Straight | ||||||
| 2" | 4" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
| 3" | 6" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
| 40mm | 3" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 50mm | 3 15/16" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 60mm | 4 5/8" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 80mm | 6 1/8" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 90mm | 6 7/8" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
90° Angle | ||||||
| 2" | 4" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
| 3" | 6" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
| 40mm | 3 1/8" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 50mm | 3 15/16" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 60mm | 4 5/8" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 80mm | 6 1/4" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 90mm | 7" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
Tee | ||||||
| 2" | 4" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
| 3" | 6" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
| 40mm | 3 1/8" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 50mm | 3 15/16" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 60mm | 4 5/8" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 80mm | 6 1/8" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 90mm | 6 7/8" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
Cross | ||||||
| 2" | 6" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 3" | 9" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
Black | ||||||
Straight | ||||||
| 2" | 2" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
| 3" | 3" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
| 40mm | 1 1/2" | Not Required | Yes | Powder-Coated 6063 Aluminum | 00000000 | 00000 |
| 50mm | 1 31/32" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 60mm | 2 1/4" | Not Required | Yes | Powder-Coated 6063 Aluminum | 00000000 | 00000 |
| 80mm | 3" | Not Required | Yes | Powder-Coated 6063 Aluminum | 00000000 | 00000 |
| 90mm | 3 3/8" | Not Required | Yes | Powder-Coated 6063 Aluminum | 00000000 | 00000 |
Extended Straight | ||||||
| 2" | 4" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
| 3" | 6" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
| 40mm | 3" | Not Required | Yes | Powder-Coated 6063 Aluminum | 00000000 | 00000 |
| 50mm | 3 15/16" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 60mm | 4 5/8" | Not Required | Yes | Powder-Coated 6063 Aluminum | 00000000 | 00000 |
| 80mm | 6 1/8" | Not Required | Yes | Powder-Coated 6063 Aluminum | 00000000 | 00000 |
| 90mm | 6 7/8" | Not Required | Yes | Powder-Coated 6063 Aluminum | 00000000 | 00000 |
90° Angle | ||||||
| 2" | 4" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
| 3" | 6" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
| 40mm | 3 1/8" | Not Required | Yes | Powder-Coated 6063 Aluminum | 00000000 | 00000 |
| 50mm | 3 15/16" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 60mm | 4 5/8" | Not Required | Yes | Powder-Coated 6063 Aluminum | 00000000 | 00000 |
| 80mm | 6 1/4" | Not Required | Yes | Powder-Coated 6063 Aluminum | 00000000 | 00000 |
| 90mm | 7" | Not Required | Yes | Powder-Coated 6063 Aluminum | 00000000 | 00000 |
Tee | ||||||
| 2" | 4" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
| 3" | 6" | Not Required | Yes | Anodized 6063 Aluminum | 000000000 | 00000 |
| 40mm | 3 1/8" | Not Required | Yes | Powder-Coated 6063 Aluminum | 00000000 | 00000 |
| 50mm | 3 15/16" | Not Required | Yes | Anodized 6063 Aluminum | 00000000 | 00000 |
| 60mm | 4 5/8" | Not Required | Yes | Powder-Coated 6063 Aluminum | 00000000 | 00000 |
| 80mm | 6 1/8" | Not Required | Yes | Powder-Coated 6063 Aluminum | 00000000 | 00000 |
| 90mm | 6 7/8" | Not Required | Yes | Powder-Coated 6063 Aluminum | 00000000 | 00000 |
Adjustable-Angle Brackets
Surface
Adjustable-angle brackets let you mount one rail to another at many different angles.
Surface adjustable-angle brackets come in pairs and let you mount one rail next to another at any angle but not parallel to each other.
Reducer Corner Brackets
Corner Reducer Bracket for Single Rails
Extended Corner Reducer Bracket for Double and Quad Rails
Reducer brackets connect rails of different rail heights.
Corner brackets are also known as angle brackets.
Extended brackets have more connection points for stronger connections than standard-length brackets.
Reducer Surface Brackets
Reducer Bracket for Single Rails
Flush
Extended Flush Reducer Bracket for Double and Quad Rails
Offset
Reducer brackets connect rails of different heights.
Surface brackets create strong connection points because they secure to the surface of rails.
Flush reducer brackets align the faces of the rails.
Offset reducer brackets have an offset to align the T-slots of the different-size rails.
Extended brackets have more connection points for stronger connections than standard-length brackets.
| For Rail Ht. | Lg. | Color | Material | Rail Machining | Mounting Fasteners Included | Each | |
Flush Reducer for Single Rails | |||||||
|---|---|---|---|---|---|---|---|
| 1", 1 1/2" | 2 1/2" | Silver | Anodized 6063 Aluminum | Not Required | Yes | 000000000 | 00000 |
Offset Reducer for Single Rails | |||||||
| 1", 1 1/2" | 2 1/2" | Silver | Anodized 6063 Aluminum | Not Required | Yes | 000000000 | 00000 |
Extended Flush Reducer for Double and Quad Rails | |||||||
| 1", 1 1/2" | 4" | Silver | Anodized 6063 Aluminum | Not Required | Yes | 00000000 | 00000 |
| 2", 3" | 5" | Silver | Anodized 6063 Aluminum | Not Required | Yes | 00000000 | 00000 |
Surface Adapter Brackets
30° Adapter Bracket for Double/Quad to Single Rails
45° Adapter Bracket for Double/Quad to Single Rails
60° Adapter Bracket for Double/Quad to Single Rails
90° Adapter Bracket for Double/Quad to Single Rails
Tee Adapter Bracket for Triple to Double/Quad Rails
Adapter brackets connect rails with different rail profiles.
Surface brackets create strong connection points because they secure to the surface of rails.
| For Rail Ht. | Lg. | Color | Material | Rail Machining | Mounting Fasteners Included | Each | |
30° Angle Adapter Bracket for Double/Quad to Single Rails | |||||||
|---|---|---|---|---|---|---|---|
| 1 1/2" | 5" | Silver | Anodized 6063 Aluminum | Not Required | Yes | 00000000 | 000000 |
45° Angle Adapter Bracket for Double/Quad to Single Rails | |||||||
| 1 1/2" | 6" | Silver | Anodized 6063 Aluminum | Not Required | Yes | 00000000 | 00000 |
60° Angle Adapter Bracket for Double/Quad to Single Rails | |||||||
| 1 1/2" | 6" | Silver | Anodized 6063 Aluminum | Not Required | Yes | 00000000 | 00000 |
90° Angle Adapter Bracket for Double/Quad to Single Rails | |||||||
| 1" | 4" | Silver | Anodized 6063 Aluminum | Not Required | Yes | 00000000 | 00000 |
| 1 1/2" | 6" | Silver | Anodized 6063 Aluminum | Not Required | Yes | 00000000 | 00000 |
| 40mm | 6 5/16" | Silver | Anodized 6063 Aluminum | Not Required | Yes | 00000000 | 00000 |
Tee Adapter Bracket for Triple to Double/Quad Rails | |||||||
| 1 1/2" | 6" | Silver | Anodized 6063 Aluminum | Not Required | Yes | 00000000 | 00000 |
| 3" | 4" | Silver | Anodized 6063 Aluminum | Not Required | Yes | 00000000 | 00000 |
Extended Corner Concealed Brackets
Concealed brackets mount internally and stay out of sight once installed.
Extended corner concealed brackets have more connection points for stronger connections than standard-length brackets. They slide into the T-slots of your two intersecting rails, leaving the outside surface slots open for mounting other components. Tighten the included set screws to hold them in place.
For Rail Ht. | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Single | Double and Quad | Triple | Lg. | Color | Material | Rail Machining | Mounting Fasteners Included | Each | |
| 1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 2 1/2" | Silver | Anodized 6063 Aluminum | Not Required | Yes | 00000000 | 000000 |
Plate Connector Concealed Brackets
Concealed brackets mount internally and stay out of sight once installed.
Plate connector concealed brackets create a structural bracket connection point on the end of one rail that can attach at a 90° angle along another rail. They have a screw on one side and a T-slot nut on the other. Tap a hole in the end of one rail and thread in the screw. Then slide the T-slot nut into the slot of the other rail. Brackets with no required tap thread size include thread-forming screws.