The ratchet applies the correct pressure to ensure a complete four-point crimp every time to adhere to strict MIL-C-22520/1 standards. Use these crimpers to attach open- and closed-barrel pin-and-sleeve contacts in connectors. Turn the knob to select the crimp depth for your specific wire gauge size.

Tools are corrosion-resistant stainless steel.

Clamp thin materials and in tight spaces. Squeeze the handles to open the clamp; release and the spring holds it tightly in place. They have an all-metal construction that makes them good for holding parts while soldering.

Clamps with a hole on the end can be secured to your workholder’s arm, so your hands are free for soldering, gluing, and assembling.

Make one-handed cuts with these small cutters. Because they’re shorter than standard bolt cutters, they’re best for cutting thin bolts and wire. For more leverage, choose longer cutters. Not for use on wire rope.

All have jaws that are riveted onto the handles except cutters with aluminum handles. Riveted jaws are not replaceable.

Make bends up to 90° in metal sheets to form items such as boxes and trays. Benders attach to your bench top and have a brake bar that adjusts for different stock thicknesses and bend angles.

The ratchet applies the correct pressure to ensure a complete crimp every time. The dies are built into the rotating head.

Cut medium steel chain and hard steel bolts, rods, screws, rivets, nails, bars, wire, and rebar. All cutters have an adjustment screw to align cutting edges. For more leverage, choose a cutter with a longer handle. Not for use on wire rope.

No dies to buy or change—this tool has settings you adjust for different compression connector sizes. A reference chart on the tool shows you the correct settings, which you adjust with the turn of a single screw. The head has a flat surface for standing the tool up. The handles telescope 13” for increased leverage.

The unique shape of these snips gives you 40% more power per cut than standard sheet metal-cutting snips. When blades get dull, loosen a few screws to replace them. These snips are also known as tinners’ snips.

Save time and energy crimping across different connector sizes in high-volume applications—these battery-powered tools crimp without you having to change out any dies. Instead, they automatically adjust to the size of your connector. They’re faster than ratchet crimpers and because they activate with the press of a trigger, there’s less repetitive motion. A built-in pressure sensor monitors the force of each crimp to make sure the connection is complete every time. If the pressure is too low, you’ll hear a beep and see an LED flash. Connect these crimpers to your mobile device using Bluetooth to change settings and view usage data from an app. You can also check the pressure level, battery level, and other diagnostics from the LCD display on the crimper. The head rotates 350°, so you can maneuver these tools to crimp at difficult angles. An LED light on the front illuminates your workspace.

These crimpers create UL-certified connections when paired with connectors from Anderson, Blackburn, Burndy, Ilsco, Panduit, Penn-Union, or Thomas Betts (T&B).

Cannot Be Sold Outside United States—Replacement batteries and chargers cannot be sold outside the United States due to product regulations.

The high-pressure pumping system in these crimpers creates enough force to crimp large copper and aluminum lugs without using dies. Instead of dies, adjust the settings for different compression connector sizes. The head rotates 350° so you can crimp at any angle and maneuver these tools in tight spaces. Each crimper includes 10 test kits for periodically testing that the pumping system activates at the proper pressure.

Minimize wire distortion when cutting _11/16" diameter and larger aluminum and copper power and communication cable. Operate these cutters with both hands.

Jaws ratchet to increase cutting pressure as you open and close the handles. These cutters minimize wire distortion in aluminum and copper power and communication cable.

Make quick, consistent crimps from connector to connector with these battery-powered crimpers. They are faster and require less effort than ratcheting crimpers—just press the trigger to crimp. Switch out the dies to make crimps on a wide range of connector sizes. A pressure sensor monitors the force of each crimp and alerts you if the pressure is too low to make a complete connection. Connect these tools to a mobile app using Bluetooth to change settings and view usage data. You can also view the pressure level, battery life, and other diagnostics on the display. The head rotates 350°, so you can position these tools to crimp at difficult angles. An LED light on the front illuminates your workspace.

Pair them with a crimping die (sold separately) that matches the size and type of your connector. Insert the cable into the connector, line up the connector with the crimping die, and press the trigger to crimp. Jaws open automatically when you release the trigger. These crimpers create UL-certified connections when paired with connectors from Anderson, Blackburn, Burndy, Ilsco, Panduit, Penn-Union, and Thomas & Betts (T & B).

Cannot Be Sold Outside United States—Replacement batteries and chargers cannot be sold outside the United States due to product regulations.