No need for wiring—these lights plug-in with a two-prong plug. Also known as shop lights.

A flexible design allows these lights to be suspended above, wrapped around, or routed through areas on the job site.

Keep excess cord out of the way—the reel locks the cord at any length and retracts it when not in use.

Use these with portable lights that use screw-in bulbs.

With a NEMA 4X rating, these lights resist degradation when exposed to corrosive liquids, withstand liquids sprayed during washdowns, and are dust tight.

These floodlights have heads that swivel and rotate for perfect positioning in hard-to-light areas.

Similar in function to tubular machine lights, except strip machine lights have a flat lens that directs light downward.

Just like traditional tubular lights that illuminate your machine with a bright white light, these lights can also be programmed to switch over to a red or green light for communicating machine status.

Illuminate inline flow sights to inspect the color, clarity, and flow of liquids in food and beverage, brewery, chemical, and pharmaceutical processing lines.

Faster and easier to reposition than articulating-arm lights, these gooseneck-arm lights attach to your workspace for additional lighting.

Though not as bright as our miniature fiber-optic lights, these lights have built-in LEDs that last longer, are more efficient, and are more affordable.

These lights cast a narrower beam than other gooseneck-arm machine lights. Reposition them faster and more easily than articulating-arm lights.

No need for wiring—these lights plug-in with a two-prong plug.

Compared to other dock lights that can only adjust vertically and horizontally, these lights bend at any angle to direct light exactly where it's needed.

Illuminate your electronics cabinets and racks with long-lasting LED lights.

Energy efficient and long lasting, these four-pin bulbs are often used in task lights. They’re comparable to PL, Dulux, and Biax bulbs.

Often used in task lights, these two-pin wedge base bulbs are comparable to PL, Dulux, and Biax bulbs.

Pins on either side of the base lock these bulbs into sockets.

Often used as status indicators, in displays, or to check circuit function in prototyping and testing, these bulbs have wire terminals to directly install onto circuit boards.

Prongs on the side of the base plug into specialty track lighting fixtures.

Pins on the base lock these bulbs into sockets to withstand vibration.

These bulbs lock into GU24 light sockets with a twist.

Use these as replacement bulbs in stack lights.

Use for inspection and bug and rodent detection.

These lights have two UV bulbs and two fluorescent bulbs that work independently of each other.

The lamp and the lens are mounted on separate arms to provide ultimate flexibility. Bend the neck to any position and it will stay in place.

Use where electrostatic discharge is a concern.

LED magnifiers offer long life and emit a focused, even light beam for distortion-free viewing

Textured surfaces and irregularities are more visible.

Fluorescent magnifiers produce a cool, even, white light.

Give a signal with the push of a button. These lights have a control box for activating each of the three light modules.

The quick-connect four-pole M12 plug on these lights makes them easy to hook up and configure.

You can use these lights outdoors and they will still be visible. Rated IP67 for harsh environments.

A series of four flashes per cycle makes these lights more visible than other strobe lights.

As small as a hockey puck and compatible with standard 12-volt vehicle plugs, these strobe lights are inconspicuous when not in use and quick to connect.

These strobe lights flash multiple times per cycle, making them easier to spot than standard strobe lights.

Attracted by the bright UV light bulbs, flying insects will receive a lethal shock when they come into contact with the electrified metal grid.

These chambers kill viruses, bacteria, and other microbes with ultraviolet germicidal irradiation (UVGI). They’re enclosed to protect users, with a UV-blocking window and an automatic shut-off function if the door is opened while they’re running.

Set the lamp on a bench top and rotate the head 360° to direct light.

These stroboscopes come with a calibration certificate traceable to NIST that states they've passed a test for accuracy.

An aluminum housing makes this stroboscope strong and durable.