Use these general purpose connectors indoors in high vibration applications. A quarter turn locks them together when mated to remain secure in high-vibration applications.

A good fit for tight spaces, these connectors are also known as NEMA midget plugs. They turn to lock together when mated to prevent accidental disconnection.

When mated, these connectors meet NEMA 6P for protection against washdowns and temporary submersion.

Rated NEMA 6P, NEMA 13, IP66, and IP69K when mated, these connectors withstand high-pressure, high-temperature washdowns, oil/coolant splashing, and are corrosion-resistant so they can be used in high-vibration marine environments.

Use these connectors in general purpose residential and commercial applications.

These receptacles are for light-duty use.

Protect computers and other sensitive equipment from electromagnetic interference (EMI). Also known as isolated ground receptacles.

Install these receptacles indoors. They keep personnel safe from electric shock by adding ground fault protection.

Internal shutters prevent the insertion of foreign objects and accidental contact with power.

Receptacles protect sensitive equipment from electromagnetic interference (EMI) and spikes in voltage.

Reduce the likelihood of an electrical fire. Receptacles interrupt power when an electric arc is detected.

Keep personnel safe from electric shock by adding ground fault protection. These receptacles have an extra-tight fit when mated with plugs to withstand high vibration. Also known as hospital grade receptacles.

Use connectors where ignitable gas and dust may be present. They are UL listed for Class I, Division 1 and 2, Groups C and D; Class II, Division 1 and 2, Groups F and G; and Class III hazardous environments.

Rated NEMA 6P and 13, IP66, and IP69K when mated, connectors withstand oil/coolant spraying, high-pressure, high-temperature washdowns, and are corrosion resistant so they can be used in marine environments.

Prevent damage to electronic equipment caused by spikes in current. Mount these receptacles to DIN rail.

Snap these receptacles into a cutout on an electrical panel—no screws or clips needed.

Switch your device on and off without needing a separate switch. These connectors work with industry standard cords often found on power supplies, appliances, and other electronic devices.

Distribute power from one electronic device to several others with these connectors. By housing multiple outlets in a single unit, they save space and time spent on installation.

With a built-in switch, these connectors run power to appliances, power supplies, and other electronic devices while also filtering damaging EMI (electromagnetic interference).

Power electronics in damp environments while protecting them from electromagnetic interference.

Combine straight-blade and turn-lock styles in one receptacle for convenience.

These connectors meet international standards IEC 309-1 and 309-2. They prevent an electrical arc when separating mated connectors, so you can safely connect and disconnect with the power on.

Use connectors where ignitable gas and dust may be present, such as in refineries and silos. They also prevent an electrical arc when separating mated connectors so you can safetly connect and disconnect with the power on.

Often used to send power and signal to automated systems, motors, and pumps, these mini connectors carry higher currents than M5, M8, and M12 connectors.

Because they tightly thread to M12 connections, these connectors won’t let contaminants in or come loose from vibration in rugged industrial environments and automated systems as they send power and signal or just power to your equipment.

Quickly mate these connectors by pushing them together. They're often used with 12 mm proximity switches and valves in automated systems.

Minimize signal loss between low-current devices with M8 connections.

Rated IP69K, these M16 connectors protect against dust, debris, and hot, high-pressure jets of water at high volumes.

Made with industry standard barrel-style ends, these connectors carry DC power between electronic devices and power supplies.

Rated to MIL-DTL-5015 specifications, these connectors are compatible with other products that meet the same standard. They screw together for a secure connection.

Connect wires to circuit boards with Molex Mini-Fit push-in connectors. A locking tab holds the housing and plug together once they’re mated.

Install these connectors directly onto circuit boards to carry DC power from a power supply to your device. The industry standard barrel-style ends, which are often found on power supplies for laptops, wireless routers, and other common electronics.

Power robotic arms and other high-amperage machines in motor controls, conveyors, and sorting and packaging systems from your main M35 power line.

These connectors are designed for use in audio equipment.

Add a spot on your circuit board for plugging in headphones and other audio equipment.