Low-Pressure Clamp-On Connectors for Drain, Waste, and Vent
Tighten the bands on these connectors to form a strong seal on pipe or fittings.
For technical drawings and 3-D models, click on a part number.
- For Use With: Air, Water
- Temperature Range: -40° to 120° F
- Specifications Met: ASTM D5926
- For Pipe Material: Stainless Steel, Iron, Steel, Aluminum, PVC Plastic, CPVC Plastic
| For Pipe OD | For Pipe Size  | Max. Pressure | Material | Clamp Material | Flexibility | Each | |
Pipe | |||||||
|---|---|---|---|---|---|---|---|
| 5.6" | 5 | 4 psi @ 72° F | PVC Plastic | 300 Series Stainless Steel | Flexible | 00000000 | 000000 |
Hollow Tapered Plugs
The hollow construction allows these plugs to compress for a snug fit in threaded and unthreaded holes of varying diameters. Use the flange to remove them with ease.
For technical drawings and 3-D models, click on a part number.
| For Pipe Size | For ID | Ht. | Flange Dia. | Max. Temp., °F | Hardness | Color | Pkg. Qty. | Pkg. | |
Polyethylene Plastic | |||||||||
|---|---|---|---|---|---|---|---|---|---|
For Unthreaded Pipe | |||||||||
| 5 | 4.99"-5.2" | 1" | 5 5/8" | 150° | Durometer 45D | Red | 10 | 0000000 | 000000 |
Metal Round Caps
More durable than plastic caps, these provide the most protection from abrasion and impact.
Steel caps are stronger than aluminum.
Aluminum caps have good corrosion resistance, are lightweight, and are nonmagnetic.
For technical drawings and 3-D models, click on a part number.
Tapered Caps
These flexible plastic caps are tapered to fit a variety of unthreaded and threaded objects.
For technical drawings and 3-D models, click on a part number.
| For OD | For Pipe Size | Inside Ht. | Max. Temp., °F | Color | Pkg. Qty. | Pkg. | |
Flexible Polyethylene Plastic | |||||||
|---|---|---|---|---|---|---|---|
| 5.21"-5.37" | 5 | 7/8" | 150° | Red | 10 | 00000000 | 000000 |
Adhesive-Back Flange Caps
Stick these caps on the raised surfaces of flanges or other flat surfaces for extra protection during transport and storage.
For technical drawings and 3-D models, click on a part number.
| For Pipe Size | For OD | Adhesive Type | Max. Temp., °F | Color | Pkg. Qty. | Pkg. | |
Rigid Plastic | |||||||
|---|---|---|---|---|---|---|---|
| 5 | 7 5/16" | Rubber | 160° | Black | 3 | 0000000 | 000000 |
Wing Nut Expansion Plugs
Twist the wing nut on these plugs to expand the seal and close off pipe openings. Maximum air back pressure is the amount of pressure a plug can withstand without moving. Maximum water back pressure refers to the pressure resulting from the height of the water above the plug.
Expansion Plugs with Bypass
Use the bypass tube on these plugs to add air, water, and other fluid to your pipeline or to relieve pressure while testing. Maximum air back pressure is the amount of pressure a plug can withstand without moving. Maximum water back pressure refers to the pressure resulting from the height of the water above the plug.
For Pipe | Max. Back Pressure | Material | Bypass | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | ID | Air, psi | Water, ft. of head | O'all Ht. | Temp. Range, °F | Seal | Bypass Cap | Pipe Size | Thread Type | Gender | Each | |
Style C | ||||||||||||
Iron Stem | ||||||||||||
| 5 | 4.50"-5.00" | Not Rated | 23 | 12 5/8" | 30° to 150° | Natural Rubber | Metal | 1/2 | NPT | Male | 0000000 | 000000 |
Style D | ||||||||||||
Plastic Stem | ||||||||||||
| 5 | 4.72"-5.37" | 12 | 27 | 4 1/2" | -40° to 180° | Natural Rubber | Plastic | 1/2 | NPT | Male | 0000000 | 00000 |
Air-Inflatable Plugs
Conform to wide and out-of-round pipes with these inflatable plugs. Also known as pneumatic plugs, they're designed for temporary seals since they can lose pressure over time. Inflate with a hand pump (sold separately); an air compressor may overinflate the plug and cause damage. Tether the plugs using either the eyebolt or chain/ring so they don't get lost or stuck in your pipes. Maximum air back pressure is the amount of pressure a plug can withstand without moving. Maximum water back pressure refers to the pressure resulting from the height of the water above the plug.
For Pipe | Deflated | Max. Back Pressure | Material | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | ID | Dia. | Ht. | Air, psi | Water, ft. of head | Required Inflation Pressure, psi | Temp. Range, °F | Seal | Chain/Ring | Each | |
| 5 | 4.60"-5.25" | 4 1/2" | 7 3/4" | 13 | 30 | 30 | -20° to 125° | Natural Rubber | Zinc-Plated Steel | 0000000 | 0000000 |
Cleanout Plugs
Close off your drain cleanout pipe with these threaded plugs. Note: If you do not know your pipe size, measure the OD of your existing cleanout plug or the ID of your cleanout fitting and match to the value listed.
Drain Pipe Plugs
Seal unthreaded pipe ends with these plugs. They come with a band that clamps over the outside wall of your pipe and tightens with a screwdriver.
For Pipe | Max. Back Pressure | |||||||
|---|---|---|---|---|---|---|---|---|
| Size | OD | Water, ft. of head | Air | Temp. Range | Material | Clamp Material | Each | |
| 5 | 5.30"-5.62" | 10 | Not Rated | Not Rated | Neoprene Rubber | Stainless Steel | 0000000 | 000000 |