Plugs for Propylene Glycol

Filter by

System of Measurement

Pipe Size

Fitting Type

For Use With

Alcohol-Based Solvents

Deutsch Style Connectors

Thermocouple Connection Heads

Methanol (Methyl Alcohol)

Gasoline (Up to 10% Ethanol)

Hydraulic Fluid (Petroleum Based)

Methyl Ethyl Ketone (MEK)

Sodium Carbonate (Soda Ash)

Sodium Chloride

Sodium Hydroxide (Caustic Soda)

Sodium Hypochlorite (Bleach)

Toluene (Methylbenzene)

Tungsten Hexafluoride

Material

Voltage

Fitting Connection

Pipe Schedule

Pipe Material

Mount Type

Shape

Heating Element Length

Certification

UL Recognized Component

Gender

Wattage

Thread Type

Heating Element Width

Length

Electrical Connection Type

Hardwire

Mounting Position

Horizontal

Vertical

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

DFARS Specialty Metals

Exempt

RoHS

Compliant

Not Compliant

Export Control Classification Number (ECCN)

REACH

Connects To

30 Products

About Pipe and Fittings

Measure your pipe and fittings to identify their pipe size, thread size, schedule, and thread type. Then, find compatible components.

Low-Pressure Iron and Steel Press-Socket Pipe Fittings

Crimp these fittings onto steel pipe to form a tightly sealed connection that’s faster than threading or welding and doesn’t require heat. An internal gripping ring and rubber O-ring create a secure seal when crimped. They are designed to leak if fittings have not been crimped; a colored dot marks the leak path so it's easy to spot unsealed connections. These steel fittings are coated in zinc-nickel to resist corrosion, but will rust if frequently exposed to saltwater or harsh chemicals. They are comparable to Viega MegaPress steel fittings. Fittings meet ASME B31 code requirements for use in pressure piping systems.

Caps

Cap

Zinc-Plated Steel—Zinc-plated steel fittings have better corrosion resistance than plain steel fittings.

EPDM O-Ring—Fittings with an EPDM rubber O-ring are often used for water processing lines, fire sprinklers, and heating and cooling systems. EPDM rubber won’t degrade when exposed to water, ethylene glycol, and propylene glycol. These fittings meet UL 213 and FM 1920 standards for use in fire protection systems.

	Material	Max. Pressure @ Temp.	O-Ring Material	Certification		Each
Press Socket Female



	1/2	Zinc-Plated Steel	200 psi @ 72° F	EPDM	IAPMO Listed	3360N394	000000


	3/4	Zinc-Plated Steel	200 psi @ 72° F	EPDM	IAPMO Listed	3360N395	00000
	1	Zinc-Plated Steel	200 psi @ 72° F	EPDM	IAPMO Listed	3360N396	00000
	1 1/4	Zinc-Plated Steel	200 psi @ 72° F	EPDM	IAPMO Listed	3360N397	00000
	1 1/2	Zinc-Plated Steel	200 psi @ 72° F	EPDM	IAPMO Listed	3360N398	00000
	2	Zinc-Plated Steel	200 psi @ 72° F	EPDM	IAPMO Listed	3360N399	00000

Crimping Tools

Image of Product. Front orientation. Tube Crimpers.

Crimping tools seal fittings in less than five seconds. These tools are cordless, so you can take them to any job. Connect the jaw or ring that matches your pipe size to these tools, then pull the trigger to crimp the fitting. The pivoting head lets you access connections from any angle.

	Battery
Voltage, V DC	No. Included	Cap., A·h	Battery Charger Included	Battery Charging Time, min.	Compatible With		Each
18	2	3	Yes	39	Viega MegaPress, Viega ProPress, Viega ProPress XL-C	2233N106	000000000

Jaw and Ring Sets


	Jaw and Ring Set

Jaw and ring sets include three jaws, three rings, and one ring actuator jaw. Jaws are for pipe sizes 1/2 to 1; they fit directly into the crimping tool. Rings are for pipe sizes 1 1/4 to 2; clip the ring around the fitting and use the ring actuator jaw and crimping tool to press the open ends together.

For Pipe
Size	Material	For Mfr.	For Mfr. Model No.	Compatible With	Includes	Container Type		Each
1/2, 3/4, 1, 1 1/4, 1 1/2, 2	Stainless Steel, Steel	Ridgid	RP 340	Viega MegaPress	One Ring Actuator Jaw, Three Jaws (1/2-1 Pipe Size), Three Rings (1 1/4-2 Pipe Size)	Carrying Case	2233N318	000000000

Low-Pressure Stainless Steel Press-Socket Pipe Fittings

Press these fittings onto stainless steel pipe using a crimping tool for a permanent, leak-tight connection that's faster than threading or welding and doesn't require heat. Fittings have an internal stainless steel gripping ring and rubber O-ring that create a seal when crimped. They are designed to leak if fittings have not been crimped; a colored dot marks the leak path so it's easy to spot unsealed connections. All of these fittings are made of 304 stainless steel to resist corrosion from frequent exposure to water and fuels. They’re often used for water processing lines, heating and cooling systems, and fuel lines. They are comparable to Viega MegaPress fittings. Fittings meet ANSI/ASME B31 code requirements for use in pressure piping systems.

Caps

Cap

304 Stainless Steel—Fittings hold up in humid, damp, and washdown environments but will corrode if exposed to salt water or chemicals.

			304 Stainless Steel
	Pipe Size	Certification	Max. Pressure @ Temp.		Each
Press-Socket Female



		1/2	IAPMO Listed	125 psi @ 72° F	3319N193	000000


		3/4	IAPMO Listed	125 psi @ 72° F	3319N194	00000
		1	IAPMO Listed	125 psi @ 72° F	3319N195	00000
		1 1/2	IAPMO Listed	125 psi @ 72° F	3319N196	00000
		2	IAPMO Listed	125 psi @ 72° F	3319N197	000000

Crimping Tools

	Battery
Voltage, V DC	No. Included	Cap., A·h	Battery Charger Included	Battery Charging Time, min.	Compatible With		Each
18	2	3	Yes	39	Viega MegaPress, Viega ProPress, Viega ProPress XL-C	2233N106	000000000

Jaw and Ring Sets


	Jaw and Ring Set

For Pipe
Size	Material	For Mfr.	For Mfr. Model No.	Compatible With	Includes	Container Type		Each
1/2, 3/4, 1, 1 1/4, 1 1/2, 2	Stainless Steel, Steel	Ridgid	RP 340	Viega MegaPress	One Ring Actuator Jaw, Three Jaws (1/2-1 Pipe Size), Three Rings (1 1/4-2 Pipe Size)	Carrying Case	2233N318	000000000

Compact Screw-Plug Immersion Heating Elements for Oil and Coolant

Heat oil or coolant inside small containers to reduce the viscosity of the liquid and improve flow. These heating elements fit in compact openings that are 1 NPT or smaller. With a low-watt density, these heating elements operate efficiently and won’t burn out when used with a wide range of oils and coolants. The heating element is made of stainless steel, so it resists corroding when exposed to chemicals.

Both ends of these heating elements are threaded, so one side fits into your tank and the other can be threaded into a conduit to protect the wiring. For the most evenly distributed heating, choose the largest length of heating element that will fit in your container. To control the settings of the heating element they must be connected to a temperature switch or controller (required but not included).

Note: Fully submerge the heating element in liquid to prevent heating element failure.

			Heating Element											Without Temperature Control
	Wattage, W	Watt Density, W/in²	Lg.	Wd.	No. of	Pipe Size	Thread Type	Gender	Electrical Connection Type	Wire Connection	Wire Lead Lg.	Certification	For Use With	Current, amp		Each
316 Stainless Steel Heating Element with 316 Stainless Steel Body







				120V AC, Single Phase

				25	20	1 5/8"	1/4"	1	1/8	NPT	Male	Hardwire	Wire Leads	6"	CSA Certified UL Recognized Component	Ethylene Glycol Hydraulic Oil Propylene Glycol Water	3.5	6393N11	0000000


				35	20	1 9/16"	3/8"	1	1/4	NPT	Male	Hardwire	Wire Leads	6"	CSA Certified UL Recognized Component	Ethylene Glycol Hydraulic Oil Propylene Glycol Water	6	6393N13	000000
				70	20	4 5/8"	1/4"	1	1/8	NPT	Male	Hardwire	Wire Leads	6"	CSA Certified UL Recognized Component	Ethylene Glycol Hydraulic Oil Propylene Glycol Water	3.5	6393N12	000000
				100	20	4 9/16"	3/8"	1	1/4	NPT	Male	Hardwire	Wire Leads	6"	CSA Certified UL Recognized Component	Ethylene Glycol Hydraulic Oil Propylene Glycol Water	6	6393N14	000000
				100	20	2 7/16"	5/8"	1	1/2	NPT	Male	Hardwire	Wire Leads	6"	CSA Certified UL Recognized Component	Ethylene Glycol Hydraulic Oil Propylene Glycol Water	10	6393N15	000000
				165	20	3 3/8"	3/4"	1	3/4	NPT	Male	Hardwire	Wire Leads	6"	CSA Certified UL Recognized Component	Ethylene Glycol Hydraulic Oil Propylene Glycol Water	15	6393N17	000000
				215	20	5 7/16"	5/8"	1	1/2	NPT	Male	Hardwire	Wire Leads	6"	CSA Certified UL Recognized Component	Ethylene Glycol Hydraulic Oil Propylene Glycol Water	10	6393N16	000000
				285	20	4 5/16"	1"	1	1	NPT	Male	Hardwire	Wire Leads	6"	CSA Certified UL Recognized Component	Ethylene Glycol Hydraulic Oil Propylene Glycol Water	25	6393N19	000000
				300	20	6 3/8"	3/4"	1	3/4	NPT	Male	Hardwire	Wire Leads	6"	CSA Certified UL Recognized Component	Ethylene Glycol Hydraulic Oil Propylene Glycol Water	15	6393N18	000000
				470	20	7 5/16"	1"	1	1	NPT	Male	Hardwire	Wire Leads	6"	CSA Certified UL Recognized Component	Ethylene Glycol Hydraulic Oil Propylene Glycol Water	25	6393N21	000000

Screw-Plug Immersion Heating Elements for Oil and Coolant


Without Temperature Control —Incoloy Heating Element	With Adjustable Thermostat—Incoloy Heating Element

To heat oil and coolant without creating hot spots and damaging the heating element, these heating elements have a lower watt density than heating elements for water or chemicals. They install into threaded container openings or pipe couplings to quickly and efficiently heat liquid through direct contact.

Note: Fully immerse the heating element in liquid to prevent heating element failure. These heating elements install through threaded container openings or pipe couplings.

Incoloy Nickel Heating Element—Incoloy heating elements are more corrosion resistant than steel heating elements.

Without Temperature Control—Heating elements without temperature control require a temperature switch or controller (sold separately) to regulate heat output.

Adjustable Thermostat—Heating elements with an adjustable thermostat automatically turn on when the temperature drops below the set temperature and off when it rises above the set temperature. Adjust the set temperature with the dial.

			Heating Element											Without Temperature Control			Adjustable Thermostat (60° F to 250° F)
	Wattage, W	Watt Density, W/in²	Lg.	Wd.	No. of	Pipe Size	Thread Type	Gender	Electrical Connection Type	Wire Connection	Enclosure Rating	Certification	For Use With	Current, amp		Each	Current, amp	Temp. Control Method		Each
Incoloy Nickel Heating Element with 304 Stainless Steel Body







				120V AC, Single Phase

				475	22	12 9/16"	15/16"	1	1	NPT	Male	Hardwire	Screw Terminal	NEMA 1	CE Marked CSA Certified UL Recognized Component	Ethylene Glycol Hydraulic Oil Machine Oil Motor Oil Propylene Glycol Water	4	3656K204	0000000	—	—	———	0


				475	22	12 9/16"	15/16"	3	1	NPT	Male	Hardwire	Screw Terminal	NEMA 1	CE Marked CSA Certified UL Recognized Component	Ethylene Glycol Hydraulic Oil Machine Oil Motor Oil Propylene Glycol Water	—	———	0	4	Dial	3656K211	0000000
				1,100	21	28 7/16"	15/16"	1	1	NPT	Male	Hardwire	Screw Terminal	NEMA 1	CE Marked CSA Certified UL Recognized Component	Ethylene Glycol Hydraulic Oil Machine Oil Motor Oil Propylene Glycol Water	9.2	3656K205	000000	9.2	Dial	3656K212	000000
				1,325	20	34 7/8"	15/16"	1	1	NPT	Male	Hardwire	Screw Terminal	NEMA 1	CE Marked CSA Certified UL Recognized Component	Ethylene Glycol Hydraulic Oil Machine Oil Motor Oil Propylene Glycol Water	11	3656K206	000000	11	Dial	3656K213	000000

Replacement Thermostats