We will reply to your message within an hour.
Ball bearings operate with less friction than other bearings, so they can run at higher speeds.
A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication.
Use these bearings in corrosive environments and under water.
Designed with a thin, compact housing, these bearings are good for space-constrained applications.
Also known as tapped-base bearings, these ball bearings mount to surfaces from the bottom through threaded holes. Because of their narrow profile, they’re commonly used in tight-clearance spaces, including systems where multiple shafts are mounted close together.
The lubricant in these mounted ball bearings is NSF registered H1 and FDA compliant for incidental contact with food.
Meeting IP69K for washdown environments, these mounted ball bearings are used in food, beverage, pharmaceutical, and chemical plants.
These bearings have the highest speed ratings of any mounted ball bearing that we offer.
Synthetic grease enables these bearings to operate in temperatures up to 400° F—nearly double the maximum temperature of standard mounted ball bearings.
These bearings are rated IP69K as able to withstand washdown environments such as food, pharmaceutical, and chemical plants. Their fluoropolymer-coated housing is as corrosion resistant as 304 steel and safe for contact with food.
Made from slippery materials, these bearings reduce friction without the oily mess.
Use these UHMW bearings in wet, corrosive environments.
These nylon bearings swivel inside their housing to compensate for over 20° of shaft misalignment.
Capable of handling temperatures from -400° to 750° F, these graphalloy bearings withstand the widest temperature range of any of our mounted bearings.
Made of acetal blended with PTFE, these bearings handle speeds twice as fast as standard sleeve bearings.
A reliable classic—these babbitt bearings are strong and corrosion resistant.
With a flexible layer of neoprene sandwiched between an oil-embedded bronze bearing and rigid steel shell, these bearings reduce wear and machinery noise.
A strong steel housing allows these bearings to handle higher speeds than standard oil-embedded mounted sleeve bearings.
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface.
Roller bearings have a thinner profile and larger contact area than ball bearings, making them stronger and more space-efficient than ball bearings.
A bolt in each corner makes for a secure, even hold.
Made to withstand frequent washdowns, these bearings are permanently lubricated, which means you’ll never have to add lubricant. Use them in hard-to-reach areas in food, beverage, pharmaceutical, and chemical plants.
Synthetic grease enables these bearings to operate in temperatures up to 400° F—nearly double the maximum temperature of standard mounted ball bearings with four-bolt flange.
These bearings have the highest speed ratings of any mounted ball bearing in our offering.
The lubricant in these mounted ball bearings is suitable for incidental contact with food.
With a four-bolt flange for mounting and an IP69K certification approving them for washdown environments, these mounted ball bearings are used in food, beverage, pharmaceutical, and chemical plants.
With no moving parts, sleeve bearings are better for dirty environments than ball and roller bearings.
The tapered rollers in these bearings support large shafts at high static loads.
Ball bearings operate with less friction than other bearings, so you can run them at higher speeds.
Used in food, beverage, pharmaceutical, and chemical plants, these mounted ball bearings are IP69K certified for washdown environments and have a two-bolt flange for mounting.
Synthetic grease enables these bearings to operate in temperatures up to 400° F—nearly double the maximum temperature of standard mounted ball bearings with two-bolt flange.
Use these bearings for light loads and small shafts. The closed backing blocks out dust and other contaminants.
Permanently lubricated and IP69K certified for washdown environments, these mounted ball bearings are useful for hard-to-reach areas in food, beverage, pharmaceutical, and chemical plants. Mount them using their two-bolt flange.
Use these nylon or acetal bearings for light loads. The closed backing blocks out dust and other contaminants.
Made of acetal with a PTFE filling, these light duty bearings handle speeds twice as fast as standard acetal bearings can.
Embedded lubricant particles increase the load capacity of these bearings while also making them slippery.
Made of FDA listed PEEK, these bearings are suitable for direct contact with food. The closed backing blocks out dust and other contaminants.
Capable of handling temperatures from -400° to 750° F, these graphalloy bearings have the widest temperature range of any of our mounted bearings.
Handling speeds twice as fast as standard mounted sleeve bearings while limiting wear on your system, these bearings are made of PTFE-filled acetal.
These roller bearings handle extremely high speeds for their small size.
With all three mounting holes on one side, you can position the bearing above or below the mounting surface.
Combine with threaded pipe to mount these bearings in a variety of positions without the need for a flat mounting surface.
Use one of these base-mount housings with your own bearing to create a custom mounted bearing.
Mount bearings quickly by using these precision housings, which don’t require any machining.
Quickly mount bearings in these precision-flanged housings, no machining required.
Create a custom mounted bearing by adding your own bearing to these flanged housings.
Choose ball bearings for debris-free environments and when speed is a necessity. They operate with less friction than sleeve bearings, so you can run them at higher speeds.
Use the adjustment screw in the housing to tighten or loosen the snugness (also known as preload) of the bearing to your shaft.
Designed to handle heavy loads, these bearings have the highest load capacities of any mounted linear ball bearings we offer.
Outdoor as well as mild chemical environments are no problem for these bearings. They have stainless steel balls for corrosion resistance.
A ceramic coating makes high speeds as well as rapid acceleration and deceleration possible.
Made from a single piece of slippery UHMW plastic, these bearings have no cracks or crevices so they’re easy to clean.
With two bearings mounted in one housing, these sleeve bearings can handle heavier loads than standard mounted linear sleeve bearings.
Virtually maintenance free, these bearings have slippery, chemical-resistant liners that don't require added lubrication.
With two bearings mounted in a single housing, these bearings have load capacities more than 10 times as high as standard mounted linear sleeve bearings. A ceramic liner helps them achieve high speeds as well as rapid acceleration and deceleration.
Float bearings on air for precise, frictionless movement. Unlike traditional bearings that can wear your shaft down, these bearings are suspended using pressurized air for linear and rotary motion.
The shell, housing, and balls of these bearings are stainless steel for excellent corrosion resistance.
The flanged housing makes these bearings a good solution for vertical linear motion applications.
The Frelon liner on these bearings allows them to stand up to a wider range of chemicals than other flange-mounted linear sleeve bearings.
Designed to handle heavy loads, these bearings have higher load capacities than comparable standard mounted linear ball bearings for support rail shafts.
Mount these bearings on a support rail shaft for applications requiring maximum rigidity.
With two bearings mounted in a single housing, these bearings have higher load capacities than standard ones. A ceramic liner helps them achieve high speeds as well as rapid acceleration and deceleration.
A flange with mounting holes makes it easy to attach a load to these bearings. Create a compact linear and rotary motion system for robots and other applications requiring complex, fast movements, by combining them with ball splines.
Internal ball bearings provide smooth low-friction travel in applications that require high speeds, accurate positioning, and repeatable movement. Also known as single-start metric ball screws and nuts, these have a single thread that runs the length of the screw.
A set of ball bearings reduces friction and secures the end of a ball or lead screw.
Also known as single-start and self-locking lead screws and nuts, these have a single thread that runs the length of the screw. The nut travels only when the screw turns, so your system won't unexpectedly move when the lead screw is at rest.
A set of ball bearings reduces friction and secures the end of a metric ball or lead screw.