PM Drill Bushings | McMaster-Carr

Filter by

Drill Bushing Type

0.3450 mm to 57.0000 mm

4.0000 mm to 69.0000 mm

System of Measurement

Length

Drill Bit Size

Material

Installation Permanence

Permanent

Internal Chamfer

One End

Both Ends

For Drill Bit Size Decimal Equivalent

Hardness

Drill Bushing Texture

REACH

RoHS

Compliant with Exemptions

Not Compliant

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

Specifications Met

ID Increment

Length Increment

OD Increment

423 Products

Metric Press-Fit Drill Bushings

Also known as jig bushings, these metric drill bushings fit inside fixture plate holes to precisely guide drill bits, counterbores, reamers, and other cutting tools. They improve accuracy so that your drilled holes and cuts are consistent from part to part. Known for their versatility, drill bushings are also used as spacers, shims, and machinery bushings. These bushings are made of hardened, ground steel that holds its shape and resists wear, so they last for many cycles without needing to be replaced.

All bushings have a chamfer on the outside that centers the bushing as you place it into the hole. Press into place with a manual or hydraulic press. Since the bushing is sized slightly larger than the hole for an extremely tight fit, it’ll stay put permanently. These are ANSI Type PM bushings—also known as headless bushings—which means you don’t need to counterbore the hole to mount them flush.

They also have an internal chamfer that makes it easy to insert bits, pins, and punches without damaging the bushing or misaligning tools. Bushings with an internal chamfer on both ends allow you to insert tools no matter which end of the bushing is inserted into the jig. However, having an internal chamfer on the bottom of your bushing may cause shavings to get caught and bind as you remove the bit.

DIN 179 bushings meet dimensional and material standards that make sure they're compatible with other parts and tools. Although DIN 179 is no longer an active standard, it's still a common reference point for designers.

Don't see the size you need? Additional sizes are available.

					Tolerance								Each
OD, mm	Lg., mm	Internal Chamfer	For Drill Bit Size	For Drill Bit Size Decimal Equivalent	ID, mm	OD, mm	Lg., mm	Drill Bushing Type	Material	Hardness	Specifications Met		1-5	6-11	12-Up
0.5 mm ID
3	6	Both Ends	0.5 mm	0.0197"	0.006 to 0.016	0.004 to 0.01	-0.1 to 0.1	PM	Steel	Rockwell C61	__	000000000	000000	000000	000000
4	9	One End	0.5 mm	0.0197"	0.002 to 0.008	0.019 to 0.027	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
0.55 mm ID
4	9	One End	0.55 mm	0.0217"	0.002 to 0.008	0.019 to 0.027	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
0.95 mm ID
4	6	One End	0.95 mm	0.0374"	0.002 to 0.008	0.019 to 0.027	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
1 mm ID
3	6	One End	1 mm	0.0394"	0.006 to 0.016	0.004 to 0.01	-0.1 to 0.1	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
3	9	One End	1 mm	0.0394"	0.006 to 0.016	0.004 to 0.01	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
4	6	One End	1 mm	0.0394"	0.002 to 0.008	0.019 to 0.027	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
4	9	One End	1 mm	0.0394"	0.002 to 0.008	0.019 to 0.027	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
1.05 mm ID
4	9	One End	1.05 mm	0.0413"	0.002 to 0.008	0.019 to 0.027	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
1.1 mm ID
4	6	One End	1.1 mm	0.0433"	0.006 to 0.016	0.008 to 0.016	-0.1 to 0.1	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
1.2 mm ID
4	6	One End	1.2 mm	0.0472"	0.006 to 0.016	0.008 to 0.016	-0.1 to 0.1	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
4	9	One End	1.2 mm	0.0472"	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	0000
1.25 mm ID
4	9	One End	1.25 mm	0.0492"	0.002 to 0.008	0.019 to 0.027	-0.02 to 0.2	PM	Steel	Rockwell C61	__	0000000	00000	00000	00000
1.5 mm ID
4	6	One End	1.5 mm	0.0591"	0.006 to 0.016	0.008 to 0.016	-0.1 to 0.1	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
4	9	One End	1.5 mm	0.0591"	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	0000
1.55 mm ID
4	6	One End	1.55 mm	0.061"	0.002 to 0.008	0.019 to 0.027	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
1.6 mm ID
4	6	One End	1.6 mm	0.063"	0.006 to 0.016	0.008 to 0.016	-0.1 to 0.1	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
4	9	One End	1.6 mm	0.063"	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	0000000	00000	00000	0000
1.65 mm ID
4	6	One End	1.65 mm	0.065"	0.002 to 0.008	0.019 to 0.027	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
1.75 mm ID
4	6	One End	1.75 mm	0.0689"	0.002 to 0.008	0.019 to 0.027	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
4	9	One End	1.75 mm	0.0689"	0.002 to 0.008	0.019 to 0.027	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
1.8 mm ID
4	6	One End	1.8 mm	0.0709"	0.006 to 0.016	0.008 to 0.016	-0.1 to 0.1	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
4	9	Both Ends	1.8 mm	0.0709"	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
5	6	One End	1.8 mm	0.0709"	0.002 to 0.008	0.019 to 0.027	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
5	9	One End	1.8 mm	0.0709"	0.002 to 0.008	0.019 to 0.027	-0.02 to 0.2	PM	Steel	Rockwell C61	__	0000000	00000	00000	00000
1.85 mm ID
5	9	One End	1.85 mm	0.0728"	0.002 to 0.008	0.019 to 0.027	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
1.9 mm ID
5	6	One End	1.9 mm	0.0748"	0.006 to 0.016	0.008 to 0.016	-0.1 to 0.1	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
2 mm ID
5	6	One End	2 mm	0.0787"	0.006 to 0.016	0.008 to 0.016	-0.1 to 0.1	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
5	6	Both Ends	2 mm	0.0787"	0.006 to 0.016	0.008 to 0.016	-0.1 to 0.1	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
5	9	One End	2 mm	0.0787"	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	0000000	0000	0000	0000
5	9	Both Ends	2 mm	0.0787"	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
2.05 mm ID
5	6	One End	2.05 mm	0.0807"	0.002 to 0.008	0.019 to 0.027	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
2.1 mm ID
5	6	One End	2.1 mm	0.0827"	0.006 to 0.016	0.008 to 0.016	-0.1 to 0.1	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
2.15 mm ID
5	9	One End	2.15 mm	0.0846"	0.002 to 0.008	0.019 to 0.027	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
2.3 mm ID
5	6	One End	2.3 mm	0.0906"	0.006 to 0.016	0.016 to 0.08	-0.25 to 0.25	PM	Steel	Rockwell C61	DIN 179	00000000	00000	00000	0000
2.4 mm ID
5	9	One End	2.4 mm	0.0945"	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	00000000	0000	0000	0000
5	9	Both Ends	2.4 mm	0.0945"	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000

					Tolerance								Each
OD, mm	Lg., mm	Internal Chamfer	For Drill Bit Size	For Drill Bit Size Decimal Equivalent	ID, mm	OD, mm	Lg., mm	Drill Bushing Type	Material	Hardness	Specifications Met		1-5	6-11	12-Up
2.5 mm ID
5	6	One End	2.5 mm	0.0984"	0.006 to 0.016	0.008 to 0.016	-0.1 to 0.1	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
5	6	Both Ends	2.5 mm	0.0984"	0.006 to 0.016	0.008 to 0.016	-0.1 to 0.1	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
5	9	One End	2.5 mm	0.0984"	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
5	9	Both Ends	2.5 mm	0.0984"	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
10	20	One End	2.5 mm	0.0984"	0.006 to 0.016	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
2.55 mm ID
5	9	One End	2.55 mm	0.1004"	0.002 to 0.008	0.019 to 0.027	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
2.6 mm ID
5	6	One End	2.6 mm	0.1024"	0.006 to 0.016	0.008 to 0.016	-0.1 to 0.1	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
5	6	Both Ends	2.6 mm	0.1024"	0.006 to 0.016	0.008 to 0.016	-0.1 to 0.1	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
6	8	One End	2.6 mm	0.1024"	0.002 to 0.008	0.019 to 0.027	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
2.8 mm ID
6	16	One End	2.8 mm	0.1102"	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
2.9 mm ID
6	12	One End	2.9 mm	0.1142"	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	00000000	0000	0000	0000
3 mm ID
6	8	One End	3 mm	0.1181"	0.01 to 0.022	0.01 to 0.019	-0.25 to 0.25	PM	Steel	Rockwell C61	DIN 179	00000000	00000	00000	00000
6	8	Both Ends	3 mm	0.1181"	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
6	12	One End	3 mm	0.1181"	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	0000000	0000	0000	0000
6	12	Both Ends	3 mm	0.1181"	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
6	16	One End	3 mm	0.1181"	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
6	16	Both Ends	3 mm	0.1181"	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
10	20	One End	3 mm	0.1181"	0.006 to 0.016	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
3.1 mm ID
6	8	One End	3.1 mm	0.122"	0.01 to 0.022	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
6	8	Both Ends	3.1 mm	0.122"	0.01 to 0.022	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
6	12	One End	3.1 mm	0.122"	0.01 to 0.022	0.01 to 0.019	-0.25 to 0.25	PM	Steel	Rockwell C61	DIN 179	00000000	00000	00000	0000
6	12	Both Ends	3.1 mm	0.122"	0.01 to 0.022	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
3.2 mm ID
6	8	One End	3.2 mm	0.126"	0.01 to 0.022	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
6	12	One End	3.2 mm	0.126"	0.01 to 0.022	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	00000000	0000	0000	0000
6	16	One End	3.2 mm	0.126"	0.01 to 0.022	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
3.25 mm ID
6	8	One End	3.25 mm	0.128"	0.01 to 0.022	0.008 to 0.016	-0.25 to 0.25	PM	Steel	Rockwell C61	DIN 179	00000000	00000	00000	00000
6	16	One End	3.25 mm	0.128"	0.004 to 0.012	0.019 to 0.027	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
3.3 mm ID
6	8	One End	3.3 mm	0.1299"	0.01 to 0.022	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
6	8	Both Ends	3.3 mm	0.1299"	0.01 to 0.022	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
6	12	One End	3.3 mm	0.1299"	0.01 to 0.022	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	00000000	0000	0000	0000
6	12	Both Ends	3.3 mm	0.1299"	0.01 to 0.022	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
6	16	One End	3.3 mm	0.1299"	0.01 to 0.022	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
7	8	One End	3.3 mm	0.1299"	0.004 to 0.012	0.023 to 0.032	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
7	12	One End	3.3 mm	0.1299"	0.004 to 0.012	0.023 to 0.032	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
7	16	One End	3.3 mm	0.1299"	0.004 to 0.012	0.023 to 0.032	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
3.4 mm ID
7	8	One End	3.4 mm	0.1339"	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
7	12	One End	3.4 mm	0.1339"	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
3.5 mm ID
7	8	One End	3.5 mm	0.1378"	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
7	8	Both Ends	3.5 mm	0.1378"	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
7	12	One End	3.5 mm	0.1378"	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	00000000	0000	0000	0000
7	16	One End	3.5 mm	0.1378"	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	0000
3.6 mm ID
7	12	One End	3.6 mm	0.1417"	0.01 to 0.022	0.01 to 0.019	-0.25 to 0.25	PM	Steel	Rockwell C61	DIN 179	00000000	00000	00000	0000
7	12	Both Ends	3.6 mm	0.1417"	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
7	16	One End	3.6 mm	0.1417"	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	0000
3.7 mm ID
7	8	Both Ends	3.7 mm	0.1457"	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
3.9 mm ID
7	8	One End	3.9 mm	0.1535"	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
7	12	One End	3.9 mm	0.1535"	0.01 to 0.022	0.01 to 0.019	-0.25 to 0.25	PM	Steel	Rockwell C61	DIN 179	00000000	0000	0000	0000

					Tolerance								Each
OD, mm	Lg., mm	Internal Chamfer	For Drill Bit Size	For Drill Bit Size Decimal Equivalent	ID, mm	OD, mm	Lg., mm	Drill Bushing Type	Material	Hardness	Specifications Met		1-5	6-11	12-Up
4 mm ID
7	8	One End	4 mm	0.1575"	0.01 to 0.022	0.01 to 0.019	-0.25 to 0.25	PM	Steel	Rockwell C61	DIN 179	00000000	000000	000000	00000
7	8	Both Ends	4 mm	0.1575"	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
7	12	One End	4 mm	0.1575"	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	0000000	0000	0000	0000
7	12	Both Ends	4 mm	0.1575"	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
7	16	One End	4 mm	0.1575"	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	0000
7	16	Both Ends	4 mm	0.1575"	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
8	8	One End	4 mm	0.1575"	0.004 to 0.012	0.023 to 0.032	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
8	12	One End	4 mm	0.1575"	0.004 to 0.012	0.023 to 0.032	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
8	16	One End	4 mm	0.1575"	0.004 to 0.012	0.023 to 0.032	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
4.1 mm ID
8	8	One End	4.1 mm	0.1614"	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
8	8	Both Ends	4.1 mm	0.1614"	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
8	12	One End	4.1 mm	0.1614"	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
8	16	One End	4.1 mm	0.1614"	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	00000000	00000	00000	0000
4.2 mm ID
8	8	One End	4.2 mm	0.1654"	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
8	8	Both Ends	4.2 mm	0.1654"	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
8	12	One End	4.2 mm	0.1654"	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
8	16	One End	4.2 mm	0.1654"	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
4.24 mm ID
8	12	One End	4.24 mm	0.1669"	0.004 to 0.012	0.01 to 0.019	-0.4 to 0.4	PM	Steel	Rockwell C61	__	00000000	00000	0000	0000
4.25 mm ID
8	8	One End	4.25 mm	0.1673"	0.004 to 0.012	0.023 to 0.032	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
4.3 mm ID
8	8	Both Ends	4.3 mm	0.1693"	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
4.4 mm ID
8	8	Both Ends	4.4 mm	0.1732"	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
4.5 mm ID
8	8	One End	4.5 mm	0.1772"	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
8	8	Both Ends	4.5 mm	0.1772"	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
8	12	One End	4.5 mm	0.1772"	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
8	16	One End	4.5 mm	0.1772"	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	00000000	00000	00000	0000
4.6 mm ID
8	16	One End	4.6 mm	0.1811"	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	0000000	00000	00000	0000
4.75 mm ID
8	12	One End	4.75 mm	0.187"	0.01 to 0.022	0.01 to 0.019	-0.25 to 0.25	PM	Steel	Rockwell C61	DIN 179	00000000	00000	0000	0000
4.8 mm ID
8	8	One End	4.8 mm	0.189"	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
8	12	One End	4.8 mm	0.189"	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
4.9 mm ID
8	12	One End	4.9 mm	0.1929"	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
5 mm ID
8	8	One End	5 mm	0.1969"	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	0000000	0000	0000	0000
8	8	Both Ends	5 mm	0.1969"	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
8	12	One End	5 mm	0.1969"	0.01 to 0.022	0.01 to 0.019	-0.25 to 0.25	PM	Steel	Rockwell C61	DIN 179	00000000	00000	00000	00000
8	12	Both Ends	5 mm	0.1969"	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
8	14	One End	5 mm	0.1969"	0.004 to 0.012	0.023 to 0.032	-0.02 to 0.2	PM	Steel	Rockwell C61	__	0000000	00000	00000	00000
8	16	One End	5 mm	0.1969"	0.004 to 0.012	0.023 to 0.032	-0.02 to 0.2	PM	Steel	Rockwell C61	__	0000000	00000	00000	00000
8	16	One End	5 mm	0.1969"	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
8	16	Both Ends	5 mm	0.1969"	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
10	10	One End	5 mm	0.1969"	0.004 to 0.012	0.023 to 0.032	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
10	16	One End	5 mm	0.1969"	0.004 to 0.012	0.023 to 0.032	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
10	20	One End	5 mm	0.1969"	0.004 to 0.012	0.023 to 0.032	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
5.1 mm ID
10	10	One End	5.1 mm	0.2008"	0.01 to 0.022	0.01 to 0.019	-0.25 to 0.25	PM	Steel	Rockwell C61	DIN 179	00000000	00000	00000	00000
10	10	Both Ends	5.1 mm	0.2008"	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
10	16	One End	5.1 mm	0.2008"	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
10	20	One End	5.1 mm	0.2008"	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
5.2 mm ID
10	10	One End	5.2 mm	0.2047"	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
10	10	Both Ends	5.2 mm	0.2047"	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000

					Tolerance								Each
OD, mm	Lg., mm	Internal Chamfer	For Drill Bit Size	For Drill Bit Size Decimal Equivalent	ID, mm	OD, mm	Lg., mm	Drill Bushing Type	Material	Hardness	Specifications Met		1-5	6-11	12-Up
5.25 mm ID
10	10	One End	5.25 mm	0.2067"	0.004 to 0.012	0.01 to 0.019	-0.4 to 0.4	PM	Steel	Rockwell C61	__	00000000	000000	000000	00000
10	16	One End	5.25 mm	0.2067"	0.01 to 0.022	0.01 to 0.019	-0.25 to 0.25	PM	Steel	Rockwell C61	DIN 179	00000000	00000	0000	0000
5.3 mm ID
10	10	Both Ends	5.3 mm	0.2087"	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
5.4 mm ID
10	10	One End	5.4 mm	0.2126"	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
5.5 mm ID
10	10	One End	5.5 mm	0.2165"	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
10	10	Both Ends	5.5 mm	0.2165"	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
10	16	One End	5.5 mm	0.2165"	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	00000000	0000	0000	0000
10	16	Both Ends	5.5 mm	0.2165"	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
10	20	One End	5.5 mm	0.2165"	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
5.6 mm ID
10	10	One End	5.6 mm	0.2205"	0.004 to 0.012	0.01 to 0.019	-0.4 to 0.4	PM	Steel	Rockwell C61	__	00000000	00000	00000	00000
10	10	Both Ends	5.6 mm	0.2205"	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
5.7 mm ID
10	10	One End	5.7 mm	0.2244"	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
10	16	One End	5.7 mm	0.2244"	0.01 to 0.022	0.01 to 0.019	-0.25 to 0.25	PM	Steel	Rockwell C61	DIN 179	00000000	00000	0000	0000
5.8 mm ID
10	10	One End	5.8 mm	0.2283"	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
5.9 mm ID
10	10	Both Ends	5.9 mm	0.2323"	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
10	16	One End	5.9 mm	0.2323"	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
6 mm ID
8	12	One End	6 mm	0.2362"	0.01 to 0.022	0.01 to 0.019	-0.25 to 0.25	PM	Steel	Rockwell C61	DIN 179	00000000	00000	00000	00000
10	5	One End	6 mm	0.2362"	0.004 to 0.012	0.023 to 0.032	-0.02 to 0.2	PM	Steel	Rockwell C61	__	0000000	00000	00000	00000
10	6	One End	6 mm	0.2362"	0.01 to 0.022	0.01 to 0.019	-0.25 to 0.25	PM	Steel	Rockwell C61	DIN 179	00000000	00000	00000	00000
10	10	One End	6 mm	0.2362"	0.01 to 0.022	0.01 to 0.019	-0.25 to 0.25	PM	Steel	Rockwell C61	DIN 179	00000000	00000	00000	00000
10	10	Both Ends	6 mm	0.2362"	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
10	16	One End	6 mm	0.2362"	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	0000000	0000	0000	0000
10	16	Both Ends	6 mm	0.2362"	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
10	20	One End	6 mm	0.2362"	0.01 to 0.022	0.01 to 0.019	-0.25 to 0.25	PM	Steel	Rockwell C61	DIN 179	00000000	00000	00000	00000
10	20	Both Ends	6 mm	0.2362"	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
12	10	One End	6 mm	0.2362"	0.004 to 0.012	0.028 to 0.039	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
12	16	One End	6 mm	0.2362"	0.004 to 0.012	0.028 to 0.039	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
12	20	One End	6 mm	0.2362"	0.004 to 0.012	0.028 to 0.039	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
6.05 mm ID
10	12	One End	6.05 mm	0.2382"	0.013 to 0.028	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
6.1 mm ID
12	10	One End	6.1 mm	0.2402"	0.013 to 0.028	0.012 to 0.023	-0.25 to 0.25	PM	Steel	Rockwell C61	DIN 179	00000000	00000	00000	0000
12	10	Both Ends	6.1 mm	0.2402"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
12	16	One End	6.1 mm	0.2402"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
12	16	Both Ends	6.1 mm	0.2402"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
12	20	One End	6.1 mm	0.2402"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
6.2 mm ID
12	10	Both Ends	6.2 mm	0.2441"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
12	16	One End	6.2 mm	0.2441"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
6.25 mm ID
12	10	One End	6.25 mm	0.2461"	0.013 to 0.028	0.012 to 0.023	-0.25 to 0.25	PM	Steel	Rockwell C61	DIN 179	00000000	00000	00000	0000
12	16	One End	6.25 mm	0.2461"	0.013 to 0.028	0.012 to 0.023	-0.25 to 0.25	PM	Steel	Rockwell C61	DIN 179	00000000	0000	0000	0000
6.3 mm ID
12	10	One End	6.3 mm	0.248"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
12	10	Both Ends	6.3 mm	0.248"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
6.4 mm ID
12	10	One End	6.4 mm	0.252"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
12	10	Both Ends	6.4 mm	0.252"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
12	16	One End	6.4 mm	0.252"	0.013 to 0.028	0.012 to 0.023	-0.25 to 0.25	PM	Steel	Rockwell C61	DIN 179	00000000	0000	0000	0000
12	20	One End	6.4 mm	0.252"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000

					Tolerance								Each
OD, mm	Lg., mm	Internal Chamfer	For Drill Bit Size	For Drill Bit Size Decimal Equivalent	ID, mm	OD, mm	Lg., mm	Drill Bushing Type	Material	Hardness	Specifications Met		1-5	6-11	12-Up
6.5 mm ID
12	10	One End	6.5 mm	0.2559"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	000000	00000	00000
12	10	Both Ends	6.5 mm	0.2559"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
12	16	One End	6.5 mm	0.2559"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	0000000	0000	0000	0000
12	16	Both Ends	6.5 mm	0.2559"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
12	20	One End	6.5 mm	0.2559"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
6.6 mm ID
12	10	One End	6.6 mm	0.2598"	0.005 to 0.014	0.012 to 0.023	-0.4 to 0.4	PM	Steel	Rockwell C61	__	00000000	00000	00000	0000
12	10	Both Ends	6.6 mm	0.2598"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
12	20	One End	6.6 mm	0.2598"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
6.7 mm ID
12	10	Both Ends	6.7 mm	0.2638"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
12	16	One End	6.7 mm	0.2638"	0.005 to 0.014	0.012 to 0.023	-0.4 to 0.4	PM	Steel	Rockwell C61	__	00000000	00000	0000	0000
12	20	One End	6.7 mm	0.2638"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
6.8 mm ID
12	10	One End	6.8 mm	0.2677"	0.005 to 0.014	0.012 to 0.023	-0.4 to 0.4	PM	Steel	Rockwell C61	__	00000000	00000	00000	0000
12	10	Both Ends	6.8 mm	0.2677"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
12	16	One End	6.8 mm	0.2677"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
12	20	One End	6.8 mm	0.2677"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
6.9 mm ID
12	10	One End	6.9 mm	0.2717"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
12	16	Both Ends	6.9 mm	0.2717"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
12	20	One End	6.9 mm	0.2717"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
7 mm ID
12	10	One End	7 mm	0.2756"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
12	10	Both Ends	7 mm	0.2756"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
12	16	One End	7 mm	0.2756"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	00000000	0000	0000	0000
12	16	Both Ends	7 mm	0.2756"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
12	20	One End	7 mm	0.2756"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
12	20	Both Ends	7 mm	0.2756"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
7.1 mm ID
12	10	Both Ends	7.1 mm	0.2795"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
12	20	One End	7.1 mm	0.2795"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
7.2 mm ID
12	20	One End	7.2 mm	0.2835"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
7.25 mm ID
12	10	One End	7.25 mm	0.2854"	0.005 to 0.014	0.028 to 0.039	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
7.3 mm ID
12	10	One End	7.3 mm	0.2874"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
12	16	One End	7.3 mm	0.2874"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	00000000	0000	0000	0000
7.4 mm ID
12	10	One End	7.4 mm	0.2913"	0.005 to 0.014	0.012 to 0.023	-0.4 to 0.4	PM	Steel	Rockwell C61	__	00000000	00000	00000	0000
7.5 mm ID
12	10	One End	7.5 mm	0.2953"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
12	16	One End	7.5 mm	0.2953"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	00000000	0000	0000	0000
7.6 mm ID
12	10	One End	7.6 mm	0.2992"	0.013 to 0.028	0.012 to 0.023	-0.25 to 0.25	PM	Steel	Rockwell C61	DIN 179	00000000	00000	00000	0000
7.75 mm ID
12	10	One End	7.75 mm	0.3051"	0.005 to 0.014	0.028 to 0.039	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
7.8 mm ID
12	16	One End	7.8 mm	0.3071"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
12	20	One End	7.8 mm	0.3071"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
7.9 mm ID
12	10	One End	7.9 mm	0.311"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
12	20	One End	7.9 mm	0.311"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000

					Tolerance								Each
OD, mm	Lg., mm	Internal Chamfer	For Drill Bit Size	For Drill Bit Size Decimal Equivalent	ID, mm	OD, mm	Lg., mm	Drill Bushing Type	Material	Hardness	Specifications Met		1-5	6-11	12-Up
8 mm ID
12	6	One End	8 mm	0.315"	0.005 to 0.014	0.028 to 0.039	-0.02 to 0.2	PM	Steel	Rockwell C61	__	0000000	000000	000000	000000
12	10	One End	8 mm	0.315"	0.013 to 0.028	0.012 to 0.023	-0.25 to 0.25	PM	Steel	Rockwell C61	DIN 179	00000000	00000	00000	00000
12	10	Both Ends	8 mm	0.315"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
12	12.7	One End	8 mm	0.315"	0.005 to 0.014	0.028 to 0.039	-0.02 to 0.2	PM	Steel	Rockwell C61	__	0000000	00000	00000	00000
12	16	One End	8 mm	0.315"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	0000000	0000	0000	0000
12	16	Both Ends	8 mm	0.315"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
12	20	One End	8 mm	0.315"	0.013 to 0.028	0.012 to 0.023	-0.25 to 0.25	PM	Steel	Rockwell C61	DIN 179	00000000	00000	00000	0000
12	20	Both Ends	8 mm	0.315"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
15	12	One End	8 mm	0.315"	0.005 to 0.014	0.028 to 0.039	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
15	20	One End	8 mm	0.315"	0.005 to 0.014	0.028 to 0.039	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
15	25	One End	8 mm	0.315"	0.005 to 0.014	0.028 to 0.039	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
8.1 mm ID
15	12	One End	8.1 mm	0.3189"	0.005 to 0.014	0.012 to 0.023	-0.4 to 0.4	PM	Steel	Rockwell C61	__	00000000	00000	00000	00000
15	12	One End	8.1 mm	0.3189"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
15	12	Both Ends	8.1 mm	0.3189"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
15	20	Both Ends	8.1 mm	0.3189"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
15	25	One End	8.1 mm	0.3189"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
8.2 mm ID
15	12	One End	8.2 mm	0.3228"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
8.25 mm ID
15	20	One End	8.25 mm	0.3248"	0.013 to 0.028	0.012 to 0.023	-0.25 to 0.25	PM	Steel	Rockwell C61	DIN 179	00000000	00000	0000	0000
8.3 mm ID
15	12	One End	8.3 mm	0.3268"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
8.4 mm ID
15	12	One End	8.4 mm	0.3307"	0.005 to 0.014	0.012 to 0.023	-0.4 to 0.4	PM	Steel	Rockwell C61	__	00000000	00000	00000	00000
15	12	Both Ends	8.4 mm	0.3307"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
8.5 mm ID
15	12	One End	8.5 mm	0.3346"	0.013 to 0.028	0.012 to 0.023	-0.25 to 0.25	PM	Steel	Rockwell C61	DIN 179	00000000	00000	00000	00000
15	12	Both Ends	8.5 mm	0.3346"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
15	20	One End	8.5 mm	0.3346"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	00000000	00000	0000	0000
15	20	Both Ends	8.5 mm	0.3346"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
15	25	One End	8.5 mm	0.3346"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
8.75 mm ID
15	12	One End	8.75 mm	0.3445"	0.013 to 0.028	0.012 to 0.023	-0.25 to 0.25	PM	Steel	Rockwell C61	DIN 179	00000000	00000	00000	00000
8.8 mm ID
15	12	One End	8.8 mm	0.3465"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
9 mm ID
15	12	One End	9 mm	0.3543"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
15	12	Both Ends	9 mm	0.3543"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
15	20	One End	9 mm	0.3543"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	00000000	00000	0000	0000
15	20	Both Ends	9 mm	0.3543"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
15	25	One End	9 mm	0.3543"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
9.1 mm ID
15	12	One End	9.1 mm	0.3583"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
15	20	One End	9.1 mm	0.3583"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	0000
9.2 mm ID
15	20	One End	9.2 mm	0.3622"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	00000000	00000	0000	0000

					Tolerance								Each
OD, mm	Lg., mm	Internal Chamfer	For Drill Bit Size	For Drill Bit Size Decimal Equivalent	ID, mm	OD, mm	Lg., mm	Drill Bushing Type	Material	Hardness	Specifications Met		1-5	6-11	12-Up
9.5 mm ID
15	12	One End	9.5 mm	0.374"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	000000	00000	00000
15	12	Both Ends	9.5 mm	0.374"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
15	20	One End	9.5 mm	0.374"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	0000
15	25	One End	9.5 mm	0.374"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
9.6 mm ID
15	12	Both Ends	9.6 mm	0.378"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
15	20	One End	9.6 mm	0.378"	0.005 to 0.014	0.012 to 0.023	-0.4 to 0.4	PM	Steel	Rockwell C61	__	00000000	00000	0000	0000
9.7 mm ID
15	20	One End	9.7 mm	0.3819"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	0000
9.8 mm ID
15	12	One End	9.8 mm	0.3858"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
15	12	Both Ends	9.8 mm	0.3858"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
9.9 mm ID
15	12	Both Ends	9.9 mm	0.3898"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
15	25	One End	9.9 mm	0.3898"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
10 mm ID
14	25	One End	10 mm	0.3937"	0.005 to 0.014	0.028 to 0.039	-0.02 to 0.2	PM	Steel	Rockwell C61	__	0000000	0000	0000	0000
15	12	One End	10 mm	0.3937"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	0000000	0000	0000	0000
15	12	Both Ends	10 mm	0.3937"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
15	13	One End	10 mm	0.3937"	0.013 to 0.028	0.012 to 0.023	-0.25 to 0.25	PM	Steel	Rockwell C61	DIN 179	00000000	00000	0000	0000
15	20	One End	10 mm	0.3937"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	0000000	00000	0000	0000
15	20	Both Ends	10 mm	0.3937"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
15	25	One End	10 mm	0.3937"	0.013 to 0.028	0.012 to 0.023	-0.25 to 0.25	PM	Steel	Rockwell C61	DIN 179	00000000	00000	00000	00000
15	25	Both Ends	10 mm	0.3937"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
18	7	One End	10 mm	0.3937"	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
18	12	One End	10 mm	0.3937"	0.005 to 0.014	0.028 to 0.039	-0.02 to 0.2	PM	Steel	Rockwell C61	__	0000000	00000	0000	0000
18	20	One End	10 mm	0.3937"	0.005 to 0.014	0.028 to 0.039	-0.02 to 0.2	PM	Steel	Rockwell C61	__	0000000	00000	00000	0000
18	25	One End	10 mm	0.3937"	0.005 to 0.014	0.028 to 0.039	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
10.1 mm ID
18	12	One End	10.1 mm	0.3976"	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	0000
18	12	Both Ends	10.1 mm	0.3976"	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
18	20	One End	10.1 mm	0.3976"	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
18	20	Both Ends	10.1 mm	0.3976"	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
10.2 mm ID
18	12	One End	10.2 mm	0.4016"	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	0000
18	12	Both Ends	10.2 mm	0.4016"	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
10.3 mm ID
18	12	One End	10.3 mm	0.4055"	0.006 to 0.017	0.012 to 0.023	-0.4 to 0.4	PM	Steel	Rockwell C61	__	00000000	00000	00000	00000
18	12	Both Ends	10.3 mm	0.4055"	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
10.4 mm ID
18	25	One End	10.4 mm	0.4094"	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000

					Tolerance								Each
OD, mm	Lg., mm	Internal Chamfer	For Drill Bit Size	For Drill Bit Size Decimal Equivalent	ID, mm	OD, mm	Lg., mm	Drill Bushing Type	Material	Hardness	Specifications Met		1-5	6-11	12-Up
10.5 mm ID
18	12	One End	10.5 mm	0.4134"	0.006 to 0.017	0.012 to 0.023	-0.4 to 0.4	PM	Steel	Rockwell C61	__	00000000	000000	000000	000000
18	12	Both Ends	10.5 mm	0.4134"	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
18	20	One End	10.5 mm	0.4134"	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	00000000	00000	00000	0000
18	25	One End	10.5 mm	0.4134"	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
10.75 mm ID
18	20	One End	10.75 mm	0.4232"	0.006 to 0.017	0.028 to 0.039	-0.02 to 0.2	PM	Steel	Rockwell C61	__	0000000	00000	00000	00000
10.8 mm ID
18	12	One End	10.8 mm	0.4252"	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	0000
11 mm ID
18	12	One End	11 mm	0.4331"	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	0000
18	12	Both Ends	11 mm	0.4331"	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
18	20	One End	11 mm	0.4331"	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
18	20	Both Ends	11 mm	0.4331"	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
18	25	One End	11 mm	0.4331"	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
18	25	Both Ends	11 mm	0.4331"	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
11.2 mm ID
18	12	One End	11.2 mm	0.4409"	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	0000
11.5 mm ID
18	12	Both Ends	11.5 mm	0.4528"	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
11.9 mm ID
18	20	Both Ends	11.9 mm	0.4685"	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000

					Tolerance								Each
OD, mm	Lg., mm	Internal Chamfer	For Drill Bit Size	For Drill Bit Size Decimal Equivalent	ID, mm	OD, mm	Lg., mm	Drill Bushing Type	Material	Hardness	Specifications Met		1-5	6-11	12-Up
12 mm ID
16	10	One End	12 mm	0.4724"	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	000000	000000	000000
18	12	One End	12 mm	0.4724"	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	0000000	00000	0000	0000
18	12	Both Ends	12 mm	0.4724"	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
18	20	One End	12 mm	0.4724"	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
18	20	Both Ends	12 mm	0.4724"	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
18	25	One End	12 mm	0.4724"	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	0000000	00000	00000	00000
18	25	Both Ends	12 mm	0.4724"	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	16	One End	12 mm	0.4724"	0.006 to 0.017	0.035 to 0.048	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
22	28	One End	12 mm	0.4724"	0.006 to 0.017	0.035 to 0.048	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
22	36	One End	12 mm	0.4724"	0.006 to 0.017	0.035 to 0.048	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
12.05 mm ID
18	6	One End	12.05 mm	0.4744"	0.016 to 0.034	0.012 to 0.023	-0.1 to 0.1	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
12.1 mm ID
22	16	One End	12.1 mm	0.4764"	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
22	16	Both Ends	12.1 mm	0.4764"	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
12.5 mm ID
16	7	One End	12.5 mm	0.4921"	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
22	16	One End	12.5 mm	0.4921"	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
22	16	Both Ends	12.5 mm	0.4921"	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	28	One End	12.5 mm	0.4921"	0.016 to 0.034	0.015 to 0.028	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	00000	00000	00000
12.7 mm ID
22	16	Both Ends	12.7 mm	0.5"	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
12.8 mm ID
22	16	One End	12.8 mm	0.5039"	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
22	16	Both Ends	12.8 mm	0.5039"	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
13 mm ID
22	16	One End	13 mm	0.5118"	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
22	16	Both Ends	13 mm	0.5118"	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	28	One End	13 mm	0.5118"	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	00000000	00000	00000	00000
22	28	Both Ends	13 mm	0.5118"	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000

					Tolerance								Each
OD, mm	Lg., mm	Internal Chamfer	For Drill Bit Size	For Drill Bit Size Decimal Equivalent	ID, mm	OD, mm	Lg., mm	Drill Bushing Type	Material	Hardness	Specifications Met		1-5	6-11	12-Up
13.5 mm ID
22	16	Both Ends	13.5 mm	0.5315"	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	000000	000000	000000
22	28	One End	13.5 mm	0.5315"	0.016 to 0.034	0.015 to 0.028	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	00000	00000	00000
14 mm ID
22	12	One End	14 mm	0.5512"	0.006 to 0.017	0.035 to 0.048	-0.02 to 0.2	PM	Steel	Rockwell C61	__	0000000	00000	00000	00000
22	16	One End	14 mm	0.5512"	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
22	16	Both Ends	14 mm	0.5512"	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	28	One End	14 mm	0.5512"	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	00000000	00000	00000	00000
22	28	Both Ends	14 mm	0.5512"	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	36	One End	14 mm	0.5512"	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
14.2 mm ID
22	16	One End	14.2 mm	0.5591"	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
14.5 mm ID
22	28	One End	14.5 mm	0.5709"	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	00000000	00000	00000	00000

					Tolerance								Each
OD, mm	Lg., mm	Internal Chamfer	For Drill Bit Size	For Drill Bit Size Decimal Equivalent	ID, mm	OD, mm	Lg., mm	Drill Bushing Type	Material	Hardness	Specifications Met		1-5	6-11	12-Up
15 mm ID
22	16	One End	15 mm	0.5906"	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	000000	000000	000000
22	16	Both Ends	15 mm	0.5906"	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	28	One End	15 mm	0.5906"	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	00000000	00000	00000	00000
22	28	Both Ends	15 mm	0.5906"	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	36	One End	15 mm	0.5906"	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
26	28	One End	15 mm	0.5906"	0.006 to 0.017	0.035 to 0.048	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
15.25 mm ID
26	28	One End	15.25 mm	0.6004"	0.006 to 0.017	0.035 to 0.048	-0.02 to 0.2	PM	Steel	Rockwell C61	__	0000000	00000	00000	00000
15.5 mm ID
26	28	One End	15.5 mm	0.6102"	0.016 to 0.034	0.015 to 0.028	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	00000	00000	00000
16 mm ID
26	9	One End	16 mm	0.6299"	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
26	10	One End	16 mm	0.6299"	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
26	16	One End	16 mm	0.6299"	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
26	16	Both Ends	16 mm	0.6299"	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
26	28	One End	16 mm	0.6299"	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	00000000	00000	00000	00000
26	28	Both Ends	16 mm	0.6299"	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
26	36	One End	16 mm	0.6299"	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
16.25 mm ID
35	32	One End	16.25 mm	0.6398"	0.016 to 0.034	0.017 to 0.033	-0.3 to 0.3	PM	Steel	Rockwell B61	DIN 179	000000000	00000	00000	00000
16.5 mm ID
26	16	Both Ends	16.5 mm	0.6496"	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
26	28	One End	16.5 mm	0.6496"	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	00000000	00000	00000	00000
17 mm ID
26	16	One End	17 mm	0.6693"	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
26	16	Both Ends	17 mm	0.6693"	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
26	28	One End	17 mm	0.6693"	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	00000000	00000	00000	00000
26	28	Both Ends	17 mm	0.6693"	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
17.5 mm ID
26	16	One End	17.5 mm	0.689"	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
26	28	One End	17.5 mm	0.689"	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	00000000	00000	00000	00000
18 mm ID
26	16	One End	18 mm	0.7087"	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
26	16	Both Ends	18 mm	0.7087"	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
26	28	One End	18 mm	0.7087"	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	00000000	00000	00000	00000
26	28	Both Ends	18 mm	0.7087"	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
30	20	One End	18 mm	0.7087"	0.006 to 0.017	0.035 to 0.048	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
30	36	One End	18 mm	0.7087"	0.006 to 0.017	0.035 to 0.048	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
18.5 mm ID
30	20	One End	18.5 mm	0.7283"	0.02 to 0.041	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
19 mm ID
30	20	One End	19 mm	0.748"	0.02 to 0.041	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
30	20	Both Ends	19 mm	0.748"	0.02 to 0.041	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
19.5 mm ID
30	20	One End	19.5 mm	0.7677"	0.02 to 0.041	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
20 mm ID
25	18	One End	20 mm	0.7874"	0.02 to 0.041	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
30	20	One End	20 mm	0.7874"	0.02 to 0.041	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
30	20	Both Ends	20 mm	0.7874"	0.02 to 0.041	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
30	36	One End	20 mm	0.7874"	0.02 to 0.041	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	0000000	00000	00000	00000
30	36	Both Ends	20 mm	0.7874"	0.02 to 0.041	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
30	45	One End	20 mm	0.7874"	0.02 to 0.041	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
20.5 mm ID
30	20	One End	20.5 mm	0.8071"	0.02 to 0.041	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
21 mm ID
30	20	Both Ends	21 mm	0.8268"	0.02 to 0.041	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000

					Tolerance								Each
OD, mm	Lg., mm	Internal Chamfer	For Drill Bit Size	For Drill Bit Size Decimal Equivalent	ID, mm	OD, mm	Lg., mm	Drill Bushing Type	Material	Hardness	Specifications Met		1-5	6-11	12-Up
22 mm ID
30	20	One End	22 mm	0.8661"	0.02 to 0.041	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	000000	000000	000000
30	20	Both Ends	22 mm	0.8661"	0.02 to 0.041	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
30	36	One End	22 mm	0.8661"	0.02 to 0.041	0.015 to 0.028	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	00000	00000	00000
30	45	Both Ends	22 mm	0.8661"	0.02 to 0.041	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
35	20	One End	22 mm	0.8661"	0.007 to 0.02	0.043 to 0.059	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
35	36	One End	22 mm	0.8661"	0.007 to 0.02	0.043 to 0.059	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
24 mm ID
35	20	One End	24 mm	0.9449"	0.02 to 0.041	0.017 to 0.033	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
35	36	One End	24 mm	0.9449"	0.02 to 0.041	0.017 to 0.033	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	0000000	00000	00000	00000
24.5 mm ID
35	20	Both Ends	24.5 mm	0.9646"	0.02 to 0.041	0.017 to 0.033	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
25 mm ID
28	25	One End	25 mm	0.9843"	0.02 to 0.041	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
31	15	One End	25 mm	0.9843"	0.02 to 0.041	0.017 to 0.033	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
31	50	One End	25 mm	0.9843"	0.02 to 0.041	0.017 to 0.033	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
31	60	One End	25 mm	0.9843"	0.02 to 0.041	0.017 to 0.033	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
35	20	One End	25 mm	0.9843"	0.02 to 0.041	0.017 to 0.033	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
35	20	Both Ends	25 mm	0.9843"	0.02 to 0.041	0.017 to 0.033	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
35	36	One End	25 mm	0.9843"	0.02 to 0.041	0.017 to 0.033	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	0000000	00000	00000	00000
35	45	One End	25 mm	0.9843"	0.02 to 0.041	0.017 to 0.033	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
25.5 mm ID
35	20	Both Ends	25.5 mm	1.0039"	0.02 to 0.041	0.017 to 0.033	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
26 mm ID
35	20	Both Ends	26 mm	1.0236"	0.02 to 0.041	0.017 to 0.033	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
35	36	One End	26 mm	1.0236"	0.02 to 0.041	0.017 to 0.033	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
42	25	One End	26 mm	1.0236"	0.007 to 0.02	0.043 to 0.059	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
27 mm ID
42	45	One End	27 mm	1.063"	0.02 to 0.041	0.017 to 0.033	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	0000000	00000	00000	00000
28 mm ID
42	25	One End	28 mm	1.1024"	0.02 to 0.041	0.017 to 0.033	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
42	45	One End	28 mm	1.1024"	0.02 to 0.041	0.017 to 0.033	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000

					Tolerance								Each
OD, mm	Lg., mm	Internal Chamfer	For Drill Bit Size	For Drill Bit Size Decimal Equivalent	ID, mm	OD, mm	Lg., mm	Drill Bushing Type	Material	Hardness	Specifications Met		1-5	6-11	12-Up
30 mm ID
36	30	One End	30 mm	1.1811"	0.02 to 0.041	0.017 to 0.033	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	000000	000000	000000
36	50	One End	30 mm	1.1811"	0.02 to 0.041	0.017 to 0.033	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
42	25	One End	30 mm	1.1811"	0.02 to 0.041	0.017 to 0.033	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
42	25	Both Ends	30 mm	1.1811"	0.02 to 0.041	0.017 to 0.033	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
42	45	One End	30 mm	1.1811"	0.02 to 0.041	0.017 to 0.033	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	00000	00000	00000
48	25	One End	30 mm	1.1811"	0.007 to 0.02	0.043 to 0.059	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
48	56	One End	30 mm	1.1811"	0.007 to 0.02	0.043 to 0.059	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
32 mm ID
48	25	One End	32 mm	1.2598"	0.025 to 0.05	0.017 to 0.033	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
34 mm ID
48	25	Both Ends	34 mm	1.3386"	0.025 to 0.05	0.017 to 0.033	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
35 mm ID
40	20	One End	35 mm	1.378"	0.025 to 0.05	0.017 to 0.033	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
50	19	One End	35 mm	1.378"	0.025 to 0.05	0.017 to 0.033	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
55	30	One End	35 mm	1.378"	0.009 to 0.025	0.053 to 0.072	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000

					Tolerance								Each
OD, mm	Lg., mm	Internal Chamfer	For Drill Bit Size	For Drill Bit Size Decimal Equivalent	ID, mm	OD, mm	Lg., mm	Drill Bushing Type	Material	Hardness	Specifications Met		1-5	6-11	12-Up
40 mm ID
50	19	One End	40 mm	1.5748"	0.025 to 0.05	0.017 to 0.033	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	000000	000000	000000
55	30	One End	40 mm	1.5748"	0.025 to 0.05	0.02 to 0.039	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
55	30	Both Ends	40 mm	1.5748"	0.025 to 0.05	0.02 to 0.039	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
55	56	One End	40 mm	1.5748"	0.025 to 0.05	0.02 to 0.039	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
55	56	Both Ends	40 mm	1.5748"	0.025 to 0.05	0.02 to 0.039	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000

					Tolerance							Each
OD, mm	Lg., mm	Internal Chamfer	For Drill Bit Size	For Drill Bit Size Decimal Equivalent	ID, mm	OD, mm	Lg., mm	Drill Bushing Type	Material	Hardness		1-5	6-11	12-Up
45 mm ID
62	30	Both Ends	45 mm	1.7717"	0.025 to 0.05	0.02 to 0.039	-0.2 to 0.2	PM	Steel	Rockwell C61	000000000	000000	000000	000000
50 mm ID
70	30	One End	50 mm	1.9685"	0.009 to 0.025	0.059 to 0.078	-0.01 to 0.254	PM	Steel	Rockwell C61	000000000	00000	00000	00000
70	67	One End	50 mm	1.9685"	0.009 to 0.025	0.059 to 0.078	-0.01 to 0.254	PM	Steel	Rockwell C61	000000000	000000	000000	00000
55 mm ID
70	67	One End	55 mm	2.1654"	0.01 to 0.029	0.059 to 0.078	-0.01 to 0.254	PM	Steel	Rockwell C61	000000000	000000	000000	00000
60 mm ID
78	35	One End	60 mm	2.3622"	0.01 to 0.029	0.059 to 0.078	-0.01 to 0.254	PM	Steel	Rockwell C61	000000000	00000	00000	00000
70 mm ID
85	35	One End	70 mm	2.7559"	0.01 to 0.029	0.071 to 0.093	-0.01 to 0.254	PM	Steel	Rockwell C61	000000000	00000	00000	00000
80 mm ID
105	78	One End	80 mm	3.1496"	0.01 to 0.029	0.079 to 0.101	-0.01 to 0.254	PM	Steel	Rockwell C61	000000000	000000	000000	000000
105	105	One End	80 mm	3.1496"	0.01 to 0.029	0.079 to 0.101	-0.01 to 0.254	PM	Steel	Rockwell C61	000000000	000000	000000	000000

Made-to-Order Metric Press-Fit Drill Bushings

Mount flush with jig plates for precise drilling. These bushings can also be used as spacers, shims, and machinery bushings.

To Order: Specify ID, OD, and length from the ranges listed. The difference between the ID and OD must be at least 1.778 mm.

Choose an ID	Choose an OD	Choose a Length	Length Tolerance, mm	Drill Bushing Type	Material	Hardness		Each
0.3450 to 57.0000 mm in 0.0025 mm increments	4.0000 to 69.0000 mm in 0.0025 mm increments	4 to 76 mm in 1 mm increments	-0.4 to 0.4	PM	Steel	Rockwell C61	00000000	000000