A Wilkerson filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

A Parker filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

An ARO filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

A Festo filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

No need for thread adapters—these filter/regulator/lubricators have an NPT inlet and a BSPP outlet.

Connect Wilkerson modular filter/regulator/lubricator components with the same series number.

Connect ARO modular filter/regulator/lubricator components with the same series number.

Connect Festo modular filter/regulator/lubricator components with the same series number.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

These filter/regulator combinations come as one convenient unit that cleans the air as it regulates pressure.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

A clear polyurethane bowl makes these filter/regulators chemical resistant for use with synthetic compressor oils and cleaning fluids and allows you to see inside to monitor contents.

With ±0.2 psi accuracy, these filter/regulators provide more precise control than our other compressed air filter/regulators.

A stainless steel housing and bowl allow these filter/regulators to withstand corrosive environments in the semiconductor, marine, chemical, instrumentation, and paper industries.

Swap out Norgren modular filter/regulator/lubricator components without unthreading your air line connections.

Swap out Aventics modular filter/regulator/lubricator components without unthreading your air line connections.

Swap out Parker modular filter/regulator/lubricator components without unthreading your air line connections.

Prevent accidental start-up when servicing equipment.

Prevent accidental start-up when servicing equipment.

Prevent accidental start-up when servicing equipment.

Also known as Monday-morning valves, these valves slowly introduce pressure to reduce surge damage during start-up.

Also known as Monday-morning valves, these valves slowly introduce pressure to reduce surge damage during start-up.

Replace a damaged bowl, or change the drain type on your Festo modular compressed air filter.

Replace a damaged bowl, or change the bowl material or drain type on your Wilkerson modular compressed air filter.

Replace a damaged bowl or change the bowl material or drain type on your ARO modular compressed air filter.

Replace the filter element in your Norgren modular compressed air filter to trap solid particles and water droplets as small as 5 microns.

Replace the filter element in your Festo modular compressed air filter to trap solid particles and water droplets.

Replace the filter element in your ARO modular compressed air filter to trap solid particles and water droplets.

These filter elements fit in Aventics modular two-stage compressed air filters to remove water droplets, oil, and particles as small as 0.01 microns.

Also known as coalescing filters, these filter elements fit in Festo modular compressed air filters to remove oil and particles as small as 0.01 microns.

Also known as coalescing filters, these filter elements fit in Aventics modular compressed air filters to remove oil and particles as small as 0.01 microns.

Also known as coalescing filters, these filter elements fit in ARO modular compressed air filters to remove oil and particles as small as 0.3 microns.

Replace failing or lost O-rings and gaskets in Norgren modular compressed air filters.

Replace failing or lost O-rings in Wilkerson modular compressed air filters.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

The housing and bowl are 316 stainless steel to handle extremely corrosive environments such as those in semiconductor, marine, chemical, and paper industries.

A polyurethane bowl provides good chemical resistance for use with synthetic compressor oils and cleaning fluids.

Assembled, inspected, and packaged in a clean environment, these filters come sealed in antistatic double bags.

Use these filters to extend the service life of air-powered tools and then throw them away when you're done.

Use these filters where high water and dirt removal is needed—they have a two-layer filter element made of stainless steel wire mesh and cotton/polyester packing.

No need to buy and service two filters—these filters have a single element that removes both oil and particles.

Housing and bowl are 304 stainless steel for good corrosion resistance in damp environments.

Remove bacteria, viruses, moisture, and other particles from compressed air and gases used in food, pharmaceutical, biotech, and electronics applications.

Mount these filters to a 35 mm DIN rail with the included brackets.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Housing and bowl are 316 stainless steel to handle extremely corrosive environments and meet NACE (National Association of Corrosion Engineers) specifications.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Add lubrication to your air supply to extend the service life of air-powered tools and equipment.

Add lubrication to your air supply to extend the service life of air-powered tools and equipment.

Add lubrication to your air supply to extend the service life of air-powered tools and equipment.

Add lubrication to your air supply to extend the service life of air-powered tools and equipment.

Replace a damaged bowl, or change the bowl material on your Parker modular compressed air lubricator.

Replace a damaged bowl on your Norgren modular compressed air lubricator.

Replace a damaged bowl, or change the bowl material on your Wilkerson modular compressed air lubricator.

Replace a cracked or lost sight dome on your Norgren modular compressed air lubricator.

Replace a cracked or lost sight dome on your Wilkerson modular compressed air lubricator.

Adjust and maintain the pressure of your compressed air.

Adjust and maintain the pressure of your compressed air.

Adjust and maintain the pressure of your compressed air.

Adjust and maintain the pressure of your compressed air.

No need to worry about unintentional changes to your pressure setting—these regulators maintain a fixed outlet pressure.

Cleaned and double bagged in an ISO Class 3 and Fed. Spec. Class 1 clean room for protection from contamination, these regulators are suitable for use in clean rooms.

A 316 stainless steel housing allows these regulators to withstand corrosive environments in the semiconductor, marine, chemical, instrumentation, and paper industries.

Designed for installation directly to your air-powered tool, these regulators maintain the set air pressure.

At ±0.1% accuracy, use these regulators in sensitive applications where constant, consistent pressure is important.

A 316 stainless steel housing provides superior corrosion resistance. With an accuracy of ±0.1 psi, use these regulators in sensitive applications where constant, consistent pressure is important.

With a greater flow capacity than our standard precision compressed air regulators, use these regulators to adjust and maintain air pressure in sensitive high-flow applications where constant, consistent pressure is important.

Mount these regulators to a 35 mm DIN rail with the included bracket.

Keep an eye on the output pressure in high-flow applications—these regulators have a display so you can monitor your application locally.