Syringe Holders
Hang syringes when not in use to prevent contamination and spills. Or use these holders with air-powered dispensers to apply adhesive hands-free. In this setup, instead of moving your syringe around your workpiece, you slide your workpiece underneath your syringe. These holders work with most 5 ml to 30 ml syringes.
| For No. of Syringes | Hole Dia. | Wd. | Dp. | Ht. | Material | Each | |
| 2 | 0.68", 1.04" | 3" | 4 1/4" | 6 1/2" | Metal | 00000000 | 000000 |
Syringe Adapters for Air-Powered Syringe Dispensers
Convert plastic syringe barrels into syringes for air-powered dispensers. These adapters come with a gasket that creates a tight seal around a barrel, preventing leaks. Use the included hose to connect your dispenser. The adapter head swivels 360°, so you can maneuver the syringe without worrying about the hose kinking.
| No. of Pieces | Includes | Each | |
Barbed Inlet Connection | |||
|---|---|---|---|
| 117 | 4 Adapters with 6-ft. Lg. Hose (For 3-, 5-, 10-, 30-ml syringes) 4 Adapter Gaskets 18 Syringes 32 Syringe Pistons 35 Dispensing Needles 12 Dispensing Tips 9 Caps 2-oz. Squeeze Bottle with Luer Lock Connection Inline Air Hose Filter Disposable Gloves | 00000000 | 0000000 |
Air-Powered 3M Two-Part Adhesive Dispensing Guns
Loctite® Two-Part Adhesive Dispensing Guns
Do not use these guns with 3M cartridges.
Air-powered guns dispense two-part adhesives with compressed air. Use these guns only with Loctite® dual cartridges.
Air Inlet | |||||||
|---|---|---|---|---|---|---|---|
| For Cartridge Size, oz. | Operating Air Pressure, psi | Pipe Size  | Thread Type | Gender | Air Hose Included | Each | |
Air-Powered | |||||||
| 1.69 | 80 | 1/4 | NPT | Male | No | 000000000 | 0000000 |
Air-Powered One-Part Adhesive Dispensing Guns
These guns are powered with compressed air for controlled dispensing on small and large jobs alike. Connect them to an air supply with an air hose (sold separately). Use with a cartridge, cartridge holder, and nozzle (each sold separately).
Air Inlet | ||||||
|---|---|---|---|---|---|---|
| For Cartridge Size, oz. | Operating Air Pressure, psi | Thread Size | Gender | Air Hose Included | Each | |
| 2.5, 6, 12 | 0-100 | 5/16"-24 | Male | No | 0000000 | 0000000 |
Threaded Hose Connection | Quick-Disconnect Hose Connection | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Lg., ft. | Operating Air Pressure, psi | Thread Size | Gender | Coupling Size | Shape | Component | Gender | Each | |
| 10 | 0-100 | 5/16"-24 | Female | 1/4 | Industrial | Plug | Male | 0000000 | 0000000 |
Fill these cartridges with one-part adhesive and use them with a dispensing gun and cartridge holder. For precise dispensing, add a nozzle or a luer lock adapter and luer lock hub needle.
Attach these nozzles to a cartridge for controlled dispensing of one-part adhesives.
Round nozzles dispense a uniform bead.
| For Cartridge Size, oz. | Opening ID | Lg. | Pipe Size | Thread Type | Gender | Material | Each | |
| 2.5, 6, 12 | 1/32" | 4" | 1/4 | NPT | Male | Polyethylene Plastic | 0000000 | 00000 |
| 2.5, 6, 12 | 1/16" | 2 1/2" | 1/4 | NPT | Male | Polyethylene Plastic | 0000000 | 0000 |
| 2.5, 6, 12 | 1/16" | 4" | 1/4 | NPT | Male | Polyethylene Plastic | 0000000 | 0000 |
| 2.5, 6, 12 | 1/16" | 6" | 1/4 | NPT | Male | Polyethylene Plastic | 0000000 | 0000 |
| 2.5, 6, 12 | 1/8" | 2 1/2" | 1/4 | NPT | Male | Polyethylene Plastic | 0000000 | 0000 |
| 2.5, 6, 12 | 1/8" | 4" | 1/4 | NPT | Male | Polyethylene Plastic | 0000000 | 0000 |
| 2.5, 6, 12 | 1/8" | 6" | 1/4 | NPT | Male | Polyethylene Plastic | 0000000 | 0000 |
| 2.5, 6, 12 | 1/8" | 8" | 1/4 | NPT | Male | Polyethylene Plastic | 00000000 | 0000 |
| 2.5, 6, 12 | 1/8" | 10" | 1/4 | NPT | Male | Polyethylene Plastic | 00000000 | 0000 |
Attach these nozzles to a cartridge for controlled dispensing of one-part adhesives.
Ribbon nozzles have a flat opening to spread adhesive as they dispense.
Opening | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| For Cartridge Size, oz. | Wd. | Ht. | Lg. | Pipe Size | Thread Type | Gender | Material | Each | |
| 2.5, 6, 12 | 3/8" | 3/64" | 4 1/2" | 1/4 | NPT | Male | Polyethylene Plastic | 0000000 | 000000 |
| 2.5, 6, 12 | 1/2" | 1/16" | 4" | 1/4 | NPT | Male | Polyethylene Plastic | 0000000 | 00000 |
| 2.5, 6, 12 | 3/4" | 1/8" | 4 1/4" | 1/4 | NPT | Male | Polyethylene Plastic | 00000000 | 00000 |
| 2.5, 6, 12 | 1" | 1/8" | 4 1/4" | 1/4 | NPT | Male | Polyethylene Plastic | 0000000 | 00000 |
| 2.5, 6, 12 | 1 3/4" | 1/8" | 4" | 1/4 | NPT | Male | Polyethylene Plastic | 0000000 | 00000 |
Electric/Air-Powered 3M Hot-Melt Glue Guns
For use in high-volume production applications, these guns use electric heat to melt the adhesive and compressed air to keep it flowing. Load up to three glue sticks at once. The gun includes one tip; additional tips are sold separately. Use only with 3M glue sticks.
For Glue Stick | Air Inlet | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Manufacturer Model No. | Dia. | Lg. | For 3M Glue Stick Model No. | Wattage, W | Voltage | Temp. Setting, °F | Adhesive Output, lbs./hr. | Duty Cycle | Warm-Up Time, min. | Operating Air Pressure, psi | Pipe Size | Thread Type | Gender | Air Hose Lg., ft. | Cord Lg., ft. | Each | |
| II | 1" | 3" | 3738, 3762 | 500 | 120V AC | 385° | 7.5 | Continuous | 15 | 50-80 | 1/8 | NPT | Male | 8 | 8 | 00000000 | 000000000 |
Attach these tips to your glue gun to dispense hot-melt glue.
Tips are not compatible with model AE II glue guns.
| For 3M Gun Model No. | Opening ID | Overall Ht. | Each | |
Cone Tips | ||||
|---|---|---|---|---|
| II, TC/TC-Q LT | 1/8" | 3/4" | 0000000 | 000000 |