Startle intruders and draw attention to activity in remote areas without access to power—these solar-powered lights shine bright when motion is detected. They charge during the day, and the battery lasts all night with typical activity. If triggered continuously, these lights reduce brightness to last six hours on a full charge. Rated for use in wet locations, they hold up in rain and humidity.

Mount these lights about 8 ft. high on exterior walls. For maximum sunlight exposure, place the solar panel on a roof or wall.

Lights with two heads can also be set to turn on at dusk and run continuously for up to six hours, even if no motion is detected. They include a stake for installing the solar panel in the ground.

Light up offshore rigs, coal mines, and other outdoor areas where gas, vapor, or dust could ignite. These lights have an enclosure that contains sparks and explosions, so they won’t react with nearby hazards. The enclosure is also rated IK10, the highest impact rating, so it can withstand heavy blows without breaking. These lights are UL marine listed, with an aluminum housing and stainless steel hardware that resist corrosion from saltwater. They’re also IP66 rated, meaning they are sealed to keep out dust and heavy rain.

Mount these lights to a wall or square pole using the included bracket. The bracket pivots, so you can aim the beam right where you need it.

Bring light to your parking lot or walkway in minutes—these lights come wired and already attached to a lightweight pole. All you have to do is unfold the light head and secure it with a single screw, mount the pole to your existing anchor bolts, and connect them to your power source. The baseplate works with common anchor bolt patterns. If you don’t have existing anchor bolts, set the included ones in concrete.

Once these lights are up and running, a light sensor turns them on at dusk and off at dawn. A motion sensor brightens them when someone walks by at night, and they’ll dim again after 30 minutes of inactivity. Download the free app to your mobile device to adjust the light and motion sensor settings via Bluetooth.

Choose lights with one head for roadways and the edges of parking lots. Choose lights with two heads for the center of parking lots and other large areas.

16 ft. high lights are rated for 3 second wind gusts up to 120 mph per AASHTO specifications. They meet wind zone standards for all inland and U.S. coastal areas except South Florida. 20 ft. high lights are rated for 3 second wind gusts up to 90 mph per AASHTO specifications. They meet inland wind zone standards.