The abrasive-embedded mesh construction gives you more control over sanding pressure, creating finer and more consistent finishes.

Choose a bit with the same angle as your countersink to debur the inside of the hole.

The secure bond of the roll to the integrated shank prevents loosening from vibration while sanding, resulting in a smooth finish.

The premium abrasive stays sharp longer.

Flexible flaps reduce gouging while producing a uniform finish on flat and curved surfaces. They provide more control than a standard sanding sleeve but are more aggressive than a traditional flap wheel. As the flaps wear, new abrasive is exposed.

A cushioned layer lets you apply more even sanding pressure on your workpiece, creating finer and more consistent finishes.

Sized for tight spaces, these small pads sand flat and curved surfaces. They have a flexible foam layer that gives you more control over sanding pressure, creating finer and more consistent finishes.

These sponges conform exceptionally well to small, contoured surfaces.

These sponges prevent debris from accumulating on the abrasive surface and keep operating temperatures low.

The thick, abrasive-embedded nylon mesh construction flexes to compensate for uneven pressure as you sand, producing a consistent finish.

When you need to achieve a more consistent finish, choose nylon mesh sanding rolls over paper- or cloth-backed rolls.

These sheets resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.

The dental floss of abrasives, these cords slip into areas that other forms cannot. They're good for deburring and polishing small holes, narrow slots, keyways, and grooves.

These rolls are coated with aluminum oxide, which is the most common abrasive material and hard enough to sand steel and wood.

The soft abrasive is good for fine hand-polishing of metal surfaces that require the smoothest finish possible after an abrasive sequence. Also known as crocus cloth.

The soft abrasive is good for fine hand-polishing of soft nonferrous metals. Also known as crocus cloth.

Coated with aluminum oxide—the most common abrasive material, hard enough to sand steel and wood.

For a consistent finish, these pads are made with nylon mesh that flexes to compensate for uneven pressure as you sand. The hook and loop backing lets you attach, remove, and reuse these pads until they’re used up.

Dozens of vacuum holes throughout these rolls let a sander suck up dust and debris to prevent buildup on your sandpaper. They’re coated with the most common abrasive, aluminum oxide, which is hard enough to sand steel and wood.

Cut the length you need, then stick to your sanding tool. When it's time to change the sheet, peel it off.

A coating prevents dust and debris from building up on the abrasive surface.

Easy to attach and remove, these sheets grip the surface of your vacuum detail sander. Vacuum holes allow dust to get sucked up before it can build up and dull the abrasive surface.

Attach these sheets to pole sanders to smooth ceilings and walls. They’re covered in aluminum oxide, which is the most common abrasive for general use.

Quickly switch between different grits—these sanding sheets attach and detach from a compatible sanding block with hook and loop.

Dust and debris won't build up on the abrasive surface.

Quickly attach, remove, and reuse these discs with a compatible sanding tool or backup pad.

Thicker, more flexible, and less aggressive than standard nylon mesh discs, use these for sanding on curved or delicate surfaces.

These discs are abrasive-embedded cloth with a cushioned layer.

The premium abrasive lasts longer as well as cuts faster and produces a more consistent finish than standard hook and loop discs.

Holes allow dust removal when used with a vacuum sander.

Precision-shaped ceramic alumina discs abrade hard metals like stainless steel faster than standard ceramic alumina discs because of their sharp, outwardly pointed grit.

Quickly sand while capturing up to 97% of the dust generated.

Get twice the life over standard nylon mesh cushioned discs—the flexible mesh in these discs is embedded with a premium form of aluminum oxide or ceramic alumina.

The abrasive-embedded nylon mesh construction gives you more control over sanding pressure.

A special fastener on the back of these discs allows you to easily swap one disc for another.

These discs have a harder abrasive than standard quick-change discs.

The heavy duty construction provides more support than standard discs for heavy material removal.

Press onto a compatible sanding tool or backup pad; peel off to remove.

Coated with zirconia alumina to stay sharper longer.

The cushioned construction gives you more control over sanding pressure, creating finer and more consistent finishes.

The abrasive-embedded mesh construction gives you more control over sanding pressure, creating finer and more consistent finishes.

Get twice the life over standard nylon mesh cushioned discs—the flexible mesh in these discs is embedded with a premium form of aluminum oxide that aggressively removes material from steel and wood.

These discs have a harder abrasive than standard flap sanding discs for corners.

Replace your sanding discs less often—the backing plate on these discs can be trimmed off as the abrasive flaps wear down, allowing you to use more of the disc.

When you need to achieve a more consistent finish, choose nylon mesh sanding discs over paper- or cloth-backed discs.

With more flaps than standard discs, these last 30-40% longer.

Overlapping abrasive flaps bonded to a backing plate provide consistent material removal and even finishes.

The backing cushions the abrasive to prevent gouging your work surface.

Smooth or shape work surfaces. Good for general purpose sanding, the aluminum oxide abrasive on these belts is tough and won’t crack under stress.

Avoid clogs when you're removing paint or rust. The widely spaced grains on these belts give dust and debris a place to collect so they won't build up on the surface.

These belts resist deterioration when used with water or cutting fluids.

When you need to achieve a more consistent finish, choose nylon mesh sanding belts over paper- or cloth-backed belts.

At least 16" wide, these sanding belts leave a smooth, consistent finish on large workpieces. They have an aluminum oxide abrasive, which is the most common abrasive for general use.