Diamond cuts more quickly, lasts longer, and leaves a finer finish than other lapping grains.

Lap without the mess of pastes and slurries—abrasive is embedded in the surface of this waterproof film.

These sheets resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.

The grit particles are block shaped and cut slowly to produce a polished surface on metals.

The soft abrasive is good for fine hand-polishing of metal surfaces that require the smoothest finish possible after an abrasive sequence. Also known as crocus cloth.

Coated with aluminum oxide—the most common abrasive material, hard enough to sand steel and wood.

A coating prevents dust and debris from building up on the abrasive surface.

The thick, abrasive-embedded nylon mesh construction flexes to compensate for uneven pressure as you sand, producing a consistent finish.

The mesh in these sanding pads flexes to compensate for uneven pressure as you sand, producing a consistent finish.

A layer of mesh lets sanding dust and debris escape during use, preventing material buildup on the abrasive surface. These sheets resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.

With sheets in various grits, these assortments help you sand material to your desired finish. Coated in resin, these sheets are slow to degrade when used with water, grease, cutting fluids, or other chemicals.

These sheets have a long lasting diamond abrasive.

Peel and stick to your sanding tool. When it’s time to change the sheet, peel it off.

Cut to convenient sizes and shapes, these fit most sheet sanders.

A coating prevents dust and debris from building up on the abrasive surface.

Easy to attach and remove, these sheets grip the surface of your vacuum detail sander. Vacuum holes allow dust to get sucked up before it can build up and dull the abrasive surface.

Attach these sheets to pole sanders to smooth ceilings and walls. They’re covered in aluminum oxide, which is the most common abrasive for general use.

Dust and debris won’t build up on these sheets as you finish ceilings and walls. Pair them with pole sanders.

Quickly attach, remove, and reuse.

Quickly switch between different grits—these sanding sheets attach and detach from a compatible sanding block with hook and loop.