About Actuated On/Off Valves
More
Compact Solenoid On/Off Valves with Push-to-Connect Fittings
- For Use With: Water, Air, Argon, Helium, Neon, Xenon, Krypton
- Seal Material: Buna-N Rubber
- Specifications Met: CSA Certified
Insert tubing into the fittings on these valves—no heat, solder, or flux required. They operate on electricity to automatically start and stop flow.
Valves are normally closed unless actuated. They don’t require a minimum pressure drop between the inlet and outlet for operation. The actuator is directly mounted to the valve body to minimize movement and reduce wear.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
| For Tube OD | Gender | Flow Coefficient (Cv) | Max. Pressure | Pressure Drop | Temp. Range, °F | Valve Lg. | O'all Ht. | Quick-Disconnect Tab Wd. | Each | |
Polycarbonate Plastic Body with Quick-Disconnect Terminals | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Normally Closed—24V DC | ||||||||||
| 1/4" | Female | 0.31 | 80 psi @ 70° F | Zero Pressure Drop | -10° to 100° | 2" | 3" | 1/4" | 00000000 | 0000000 |
| 1/4" | Female | 0.37 | 40 psi @ 70° F | Zero Pressure Drop | -10° to 100° | 2" | 3" | 1/4" | 00000000 | 000000 |
| 3/8" | Female | 1 | 5 psi @ 70° F | Zero Pressure Drop | -10° to 100° | 2 3/8" | 3" | 1/4" | 00000000 | 000000 |
Normally Closed—120V AC | ||||||||||
| 1/4" | Female | 0.31 | 80 psi @ 70° F | Zero Pressure Drop | -10° to 100° | 2" | 3" | 1/4" | 00000000 | 000000 |
| 1/4" | Female | 0.37 | 40 psi @ 70° F | Zero Pressure Drop | -10° to 100° | 2" | 3" | 1/4" | 00000000 | 000000 |
| 3/8" | Female | 1 | 5 psi @ 70° F | Zero Pressure Drop | -10° to 100° | 2 3/8" | 3" | 1/4" | 00000000 | 000000 |
Food Industry Solenoid On/Off Valves with Push-to-Connect Fittings
- For Use With: Food, Beverage
- Seal Material: EPR Rubber
- Specifications Met: CSA Certified, NSF/ANSI 169
Insert tubing into the fittings on these valves—no heat, solder, or flux required. Valves meet NSF/ANSI 169 for use with food equipment. They operate on electricity to automatically start and stop flow.
All are normally closed unless actuated. Valves don’t require a minimum pressure drop between the inlet and outlet for operation. The actuator is directly mounted to the valve body to minimize movement and reduce wear.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
| For Tube OD | Gender | Flow Coefficient (Cv) | Max. Pressure | Pressure Drop | Temp. Range, °F | Valve Lg. | O'all Ht. | Quick-Disconnect Tab Wd. | Each | |
Polycarbonate Plastic Body with Quick-Disconnect Terminals | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Normally Closed—24V DC | ||||||||||
| 1/4" | Female | 0.3 | 80 psi @ 70° F | Zero Pressure Drop | -10° to 100° | 2" | 3" | 1/4" | 00000000 | 0000000 |
| 1/4" | Female | 0.4 | 40 psi @ 70° F | Zero Pressure Drop | -10° to 100° | 2" | 3" | 1/4" | 00000000 | 000000 |
Normally Closed—120V AC | ||||||||||
| 1/4" | Female | 0.3 | 80 psi @ 70° F | Zero Pressure Drop | -10° to 100° | 2" | 3" | 1/4" | 00000000 | 000000 |
| 1/4" | Female | 0.4 | 40 psi @ 70° F | Zero Pressure Drop | -10° to 100° | 2" | 3" | 1/4" | 00000000 | 000000 |