McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    91 Products

    Spiral Wire Sleeving

    Wrap this sleeving around cable, cords and wires to protect them and to form bundles. Unlike cable ties and tape, this sleeving can be unwound and reused.
    Polyethylene
    Image of Product. Front orientation. Wire Sleeving. Spiral Wire Sleeving.
    Polyethylene sleeving holds up under rubbing and scraping, and won’t degrade in solvents. However, it is not as soft as silicone rubber sleeving, and does not provide as much cushioning. This sleeving has been tested by UL to meet nationally recognized industry and safety standards for use in electronic systems.
    ID
    Expanded
    ID
    OD
    Wall
    Thk.
    Temp. Range,
    ° F
    Certification
    Choose a Color
    10 ft.
    Long
    25 ft.
    Long
    50 ft.
    Long
    100 ft.
    Long
    1/16"1/2"1/8"1/32"-75 to 190UL Recognized Component
    Blue, Green, Orange, Red, White, Yellow7378K4100000000000000000000000
    1/16"1/2"1/8"1/32"-75 to 190UL Recognized Component
    Clear7432K36000000000000000000
    3/16"2"1/4"1/32"-75 to 190UL Recognized Component
    Blue, Green, Orange, Red, White, Yellow7378K420000000000000000000
    3/16"2"1/4"1/32"-75 to 190UL Recognized Component
    Clear7432K370000000000000000000
    1/4"3"3/8"1/16"-75 to 190UL Recognized Component
    Blue, Green, Orange, Red, White, Yellow7378K430000000000000000000
    1/4"3"3/8"1/16"-75 to 190UL Recognized Component
    Clear7432K380000000000000000000
    3/8"4"1/2"1/16"-75 to 190UL Recognized Component
    Blue, Green, Orange, Red, White, Yellow7378K4400000000000000000000
    3/8"4"1/2"1/16"-75 to 190UL Recognized Component
    Clear7432K390000000000000000000
    1/2"4 1/2"5/8"1/16"-75 to 190UL Recognized Component
    Clear7432K47000000000000000000000
    5/8"5"3/4"1/16"-75 to 190UL Recognized Component
    Blue, Green, Orange, Red, White, Yellow7378K45000000000000000000000
    5/8"5"3/4"1/16"-75 to 190UL Recognized Component
    Clear7432K46000000000000000000000
    13/16"7"1"3/32"-75 to 190UL Recognized Component
    Blue, Green, Orange, Red, White, Yellow7378K46000000000000000000000
    13/16"7"1"3/32"-75 to 190UL Recognized Component
    Clear7432K480000000000000000000000
    1 5/16"10"1 1/2"3/32"-75 to 190UL Recognized Component
    Clear7432K4900000000000000000
     

    UV-Resistant Spiral Wire Sleeving

    This sleeving absorbs UV light, so it can be used in direct sunlight without getting damaged. Made of polyethylene, it resists abrasion and solvents. A reusable alternative to tape and cable ties, it allows you to route wire and cable between the spirals.
    Polyethylene
    Image of Product. Front orientation. Wire Sleeving. UV-Resistant Spiral Wire Sleeving.
    Orange—Orange sleeving is more visible than black sleeving. Use it to quickly and easily identify lines in outdoor safety applications. It’s also good for color coding and marking.
    ID
    Expanded
    ID
    OD
    Wall
    Thk.
    Temp. Range,
    ° F
    Certification
    Choose a
    Color
    10 ft.
    Long
    25 ft.
    Long
    50 ft.
    Long
    100 ft.
    Long
    1/16"1/2"1/8"1/32"-75 to 190UL Recognized Component
    Black7432K690000000000000000000000
    1/8"1 5/16"3/16"1/32"-75 to 190UL Recognized Component
    Black7432K950000000000000000000
    3/16"2"1/4"1/32"-75 to 190UL Recognized Component
    Black, Orange7432K1620000000000000000000
    1/4"3"3/8"1/16"-75 to 190UL Recognized Component
    Black, Orange7432K630000000000000000000
    3/8"4"1/2"1/16"-75 to 190UL Recognized Component
    Black, Orange7432K16400000000000000000000
    1/2"4 1/2"5/8"1/16"-75 to 190UL Recognized Component
    Black7432K66000000000000000000000
    5/8"5"3/4"1/16"-75 to 190UL Recognized Component
    Black, Orange7432K165000000000000000000000
    13/16"7"1"3/32"-75 to 190UL Recognized Component
    Black7432K45000000
    13/16"7"1"3/32"-75 to 190UL Recognized Component
    Black7432K25000000
    13/16"7"1"3/32"-75 to 190UL Recognized Component
    Black7432K8500000
    13/16"7"1"3/32"-75 to 190UL Recognized Component
    Black7432K67500000
    1 1/16"8"1 1/4"3/32"-75 to 190UL Recognized Component
    Black7432K990000000000000000
    1 5/16"10"1 1/2"3/32"-75 to 190UL Recognized Component
    Black7432K6800000000000000000
     

    Slit Corrugated Wire Sleeving

    A slit along the entire length makes this sleeving easy to install over wire, cable, or hose without disconnecting them; the slit does not gap when flexing. The corrugated construction gives it the impact and abrasion resistance similar to conduit, but with more flexibility. Made of polyethylene, it resists acids and solvents.
    Polyethylene
    Image of Product. Front orientation. Wire Sleeving. Slit Corrugated Wire Sleeving.
    ID
    OD
    Temp. Range,
    ° F
    Choose a Color
    5 ft.
    Long
    25 ft.
    Long
    50 ft.
    Long
    100 ft.
    Long
    1/4"3/8"-40 to 200Blue, Orange, Red7700K5100000000000000000000000
    1/4"3/8"-40 to 200Black7840K71000000000000000000
    3/8"1/2"-40 to 200Blue, Orange, Red7700K520000000000000000000
    3/8"1/2"-40 to 200Black7840K720000000000000000000
    1/2"11/16"-40 to 200Blue, Orange, Red7700K530000000000000000000
    1/2"11/16"-40 to 200Black7840K730000000000000000000
    5/8"13/16"-40 to 200Blue, Orange, Red7700K540000000000000000000
    5/8"13/16"-40 to 200Black7840K740000000000000000000
    3/4"1"-40 to 200Blue, Orange, Red7700K5500000000000000000000
    3/4"1"-40 to 200Black7840K750000000000000000000
    1"1 1/4"-40 to 200Blue, Orange, Red7700K56000000000000000000000
    1"1 1/4"-40 to 200Black7840K760000000000000000000
    1 1/4"1 7/16"-40 to 200Blue, Orange, Red7700K570000000000000000000000
    1 1/4"1 7/16"-40 to 200Black7840K770000000000000000000
    1 1/2"1 7/8"-40 to 200Blue, Orange, Red7700K580000000000000000000000
    1 1/2"1 7/8"-40 to 200Black7840K780000000000000000000
    2"2 1/4"-40 to 200Black7840K7900000000000000000
    2"2 3/8"-40 to 200Blue, Orange, Red7700K5900000000000000000000000
     

    High-Strength Spiral Wire Sleeving

    Made for bundling wire, cable, and hose in high-traffic areas—this sleeving is HDPE, so it stands up to wear and crushing forces better than standard spiral sleeving. Use it both indoors and outdoors; it won’t swell or become brittle from exposure to moisture or direct sunlight. Thanks to its tight coil, it blocks out dust and debris. The spiral construction also allows you to access your wire, cable, or hose at any point for easy repairs and to pull out individual components of your bundle to route them elsewhere. With smooth, rounded edges, it won’t scrape you or your components during installation. Unlike cable ties and tape, you can unwind and reuse this sleeving.
    HDPE
    Image of Product. Front orientation. Wire Sleeving. High-Strength Spiral Wire Sleeving.
    10 ft. Long
    25 ft. Long
    50 ft. Long
    100 ft. Long
    ID
    Expanded
    ID
    OD
    Wall
    Thk.
    Temp. Range,
    ° F
    Color
    Each
    Each
    Each
    Each
    1/4"1/2"3/8"1/16"-40 to 280Black5939N110000005939N120000005939N130000005939N14000000
    3/8"21/32"1/2"1/16"-40 to 280Black5939N21000005939N22000005939N23000005939N2400000
    1/2"1 1/16"5/8"1/16"-40 to 280Black5939N31000005939N32000005939N3300000———0
    3/4"1 3/8"15/16"3/32"-40 to 280Black5939N41000005939N42000005939N4300000———0
    1"1 11/16"1 3/16"3/32"-40 to 280Black5939N51000005939N52000005939N53000000———0
     

    Static-Control Spiral Wire Sleeving

    Keep static from damaging electronics or sparking fires. This sleeving has an antistatic additive that dissipates static charges and sparks created by your wire, cable, and hose. It’s often used near sensitive electronics or in areas where friction can generate static, such as hydraulic systems. Made of HDPE, it stands up to wear and crushing forces better than standard spiral sleeving, so it’s great for high-traffic areas. It also blocks out dust and debris, thanks to its tight coil. Use it indoors and outdoors—it won’t become brittle in direct sunlight, and it won’t swell from moisture.
    The spiral construction means you can access your wire, cable, or hose at any point for repairs. Plus, you can pull out individual components of your bundle to route them elsewhere. With smooth, rounded edges, this sleeving won’t scrape you or your components during installation. Unlike cable ties and tape, you can unwind and reuse it.
    HDPE
    Image of Product. Front orientation. Wire Sleeving. Static-Control Spiral Wire Sleeving.
    ID
    Expanded
    ID
    OD
    Wall
    Thk.
    Temp. Range,
    ° F
    Color
    10 ft.
    Long
    25 ft.
    Long
    50 ft.
    Long
    100 ft.
    Long
    3/8"15/16"1/2"1/16"-60 to 175Black5929N1000000000000000000000000
    1/2"1 1/16"11/16"1/16"-60 to 175Black5929N200000000000000000000
    5/8"1 3/16"3/4"3/32"-60 to 175Yellow5929N300000000000000000000
    13/16"1 3/8"1"3/32"-60 to 175Yellow5929N4000000000000000000000
    1"1 11/16"1 1/4"3/32"-60 to 175Black5929N5000000000000000000000
     

    Flame-Retardant Slit Corrugated Wire Sleeving

    Rated UL 94 V-2, this sleeving has an additive that resists combustion and minimizes the spread of flames. Made of polyethylene, it resists acids, solvents, and moisture. Wrap it around wire, cable, and hose without disconnecting them. It has a slit along the entire length that will not gap when flexing. The corrugated construction gives it the impact and abrasion resistance of conduit but with better flexibility.
    Polyethylene
    Image of Product. Front orientation. Wire Sleeving. Flame-Retardant Slit Corrugated Wire Sleeving.
    25 ft. Long, 50 ft. Long, and 100 ft. Long—Sleeving 25 feet or longer absorbs UV light, so it won’t get damaged in direct sunlight.
    ID
    OD
    Temp. Range,
    ° F
    Flammability
    Rating
    Color
    5 ft.
    Long
    25 ft.
    Long
    50 ft.
    Long
    100 ft.
    Long
    1/4"3/8"-40 to 200UL 94 V-2
    Gray7840K21100000000000000000000000
    3/8"1/2"-40 to 200UL 94 V-2
    Gray7840K2120000000000000000000
    1/2"11/16"-40 to 200UL 94 V-2
    Gray7840K2130000000000000000000
    5/8"13/16"-40 to 200UL 94 V-2
    Gray7840K21400000000000000000000
    3/4"1"-40 to 200UL 94 V-2
    Gray7840K21500000000000000000000
    1"1 1/4"-40 to 200UL 94 V-2
    Gray7840K216000000000000000000000
    1 1/4"1 7/16"-40 to 200UL 94 V-2
    Gray7840K2170000000000000000000000
    1 1/2"1 7/8"-40 to 200UL 94 V-2
    Gray7840K21800000000000000000000000
    2"2 3/8"-40 to 200UL 94 V-2
    Gray7840K219000000000000000000
     

    Wear-Indicating Spiral Wire Sleeving

    Identify wear and tear on your sleeving before its contents become exposed. This sleeving has a yellow inner layer that shows through when the black outer layer wears off. It’s a great choice for components such as sensitive hydraulic hoses, fluid lines, and cables that shouldn’t be installed without protection. Made of HDPE, it stands up to wear and crushing forces better than standard spiral sleeving, so it’s great for high-traffic areas. It also blocks out dust and debris, thanks to its tight coil. Use it indoors and outdoors—it won’t become brittle in direct sunlight, and it won’t swell from moisture.
    The spiral construction means you can access your wire, cable, or hose at any point for repairs. Plus, you can pull out individual components of your bundle to route them elsewhere. With smooth, rounded edges, this sleeving won’t scrape you or your components during installation. Unlike cable ties and tape, you can unwind and reuse it.
    HDPE
    Image of Product. Front orientation. Wire Sleeving. Wear-Indicating Spiral Wire Sleeving.
    Image of Specification. Front orientation. Contains Annotated, Border. Wire Sleeving. Wear-Indicating Spiral Wire Sleeving.
    ID
    Expanded
    ID
    OD
    Wall
    Thk.
    Temp. Range,
    ° F
    Features
    Color
    10 ft.
    Long
    25 ft.
    Long
    50 ft.
    Long
    100 ft.
    Long
    9/16"1 1/16"3/4"5/64"-60 to 175Wear IndicatorBlack5899N10000000000000000000000000
    1"1 11/16"1 1/4"3/32"-60 to 175Wear IndicatorBlack5899N20000000000000000000000
    1 3/8"1 15/16"1 5/8"7/64"-60 to 175Wear IndicatorBlack5899N30000000000000000000000
     

    Metal-Detectable Spiral Wire Sleeving

    Protect cables, cords, and wire and form them into bundles in your food-processing plant while lowering the risk of contaminating the food. This sleeving has a metal additive that will set off metal detectors to help you comply with Hazard Analysis and Critical Control Point (HACCP) programs. It’s also bright blue, which makes it easy to spot any broken pieces that fall into your line. All are FDA compliant for direct contact with food.
    This sleeving has a spiral shape for you to route your cables through. It’s a reusable alternative to tape and cable ties. Made of plastic, it resists corrosion and chemicals, so it withstands washdowns with sanitizers and harsh cleaners. It also holds up under impact, rubbing, and scraping. All of this sleeving meets UL 94 HB for flame retardance.
    Polyethylene
    Image of Product. Front orientation. Wire Sleeving. Metal-Detectable Spiral Wire Sleeving.
    10 ft. Long
    25 ft. Long
    ID
    Expanded
    ID
    OD
    Wall
    Thk.
    Temp. Range,
    ° F
    Food Industry Std.
    Flammability
    Rating
    Color
    Each
    Each
    1/16"5/16"3/32"1/32"-75 to 175FDA Compliant 21 CFR 177.1350
    FDA Compliant 21 CFR 178.2010
    FDA Compliant 21 CFR 178.3297
    UL 94 HB
    Blue6954N1110000006954N112000000
    1/8"3/4"5/32"1/32"-75 to 175FDA Compliant 21 CFR 177.1350
    FDA Compliant 21 CFR 178.2010
    FDA Compliant 21 CFR 178.3297
    UL 94 HB
    Blue6954N113000006954N11400000
    5/16"3 15/16"3/8"1/16"-75 to 175FDA Compliant 21 CFR 177.1350
    FDA Compliant 21 CFR 178.2010
    FDA Compliant 21 CFR 178.3297
    UL 94 HB
    Blue6954N115000006954N116000000
    5/8"5 7/8"11/16"1/16"-75 to 175FDA Compliant 21 CFR 177.1350
    FDA Compliant 21 CFR 178.2010
    FDA Compliant 21 CFR 178.3297
    UL 94 HB
    Blue6954N117000006954N118000000
     

    Glow-in-the-Dark Spiral Wire Sleeving

    Avoid tripping over wire, cable, or hose in the dark—this sleeving glows in the dark for up to 12 hours. It’s also useful for identifying certain lines after hours or during power outages, such as a power cord on a generator. Any light source recharges it, from overhead lights to sunlight from a window. Use it outdoors as well—it won’t become brittle in direct sunlight, and it won’t swell from moisture. Made of HDPE, it stands up to wear and crushing forces better than standard spiral sleeving, so it’s great for high-traffic areas. It also blocks out dust and debris, thanks to its tight coil. The spiral construction means you can access your wire, cable, or hose at any point for repairs. Plus, you can pull out individual components of your bundle to route them elsewhere. Unlike cable ties and tape, you can unwind and reuse this sleeving.
    HDPE
    Image of Product. Front orientation. Wire Sleeving. Glow-in-the-Dark Spiral Wire Sleeving.
    ID
    Expanded
    ID
    OD
    Wall
    Thk.
    Temp. Range,
    ° F
    Color
    10 ft.
    Long
    25 ft.
    Long
    50 ft.
    Long
    100 ft.
    Long
    3/8"21/32"1/2"1/16"-40 to 155Fluorescent Green5993N280000000000000000000000000
    9/16"1 1/16"11/16"1/16"-40 to 155Fluorescent Green5993N290000000000000000000000
    3/4"1 3/8"15/16"3/32"-40 to 155Fluorescent Green5993N310000000000000000000000
    1"1 11/16"1 3/16"3/32"-40 to 155Fluorescent Green5993N3200000000000000000000000
     
    back to top