How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Plastic Cam-and-Groove Hose Couplings for Water
Made of polypropylene, these couplings are lighter in weight than metal cam-and-groove couplings and have good abrasion and corrosion resistance. A complete coupling consists of a plug and a socket (both sold separately) that allow you to quickly connect and disconnect medium-to large-diameter hose lines. To connect, insert the plug into the socket and press the levers down. The levers fit snugly into the groove on the plug’s body and force the plug against the gasket to form a tight seal. To disconnect, lift both levers and pull out the plug.
Plugs with barbed end are also known as E adapters. Insert the barbed end into plastic or rubber hose and secure with a clamp.
Sockets with locking levers prevent accidental disconnection. The locking pins engage automatically when the coupling is connected. Press the locking pins simultaneously to disengage.
Straight sockets with barbed end are also known as C couplers. Insert the barbed end into plastic or rubber hose and secure with a clamp.
90° elbow sockets with barbed end are also known as CL couplers. Insert the barbed end into plastic or rubber hose and secure with a clamp.
Note: To ensure a correct fit, make sure that the plug and socket have the same coupling size.
Warning: Relieve all pressure before disconnecting the couplings. Do not use cam-and-groove couplings with compressed air or gas.
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: See table
- Temperature Range: -20° to 150° F
- Attachment Type: Use Worm-Drive Clamps or Band-and-Buckle Clamps
- Specifications Met: Fed. Spec. A-A-59326
| Coupling Size | Plug OD | For Hose ID | Max. Pressure | Each | |
Polypropylene Plastic  | |||||
|---|---|---|---|---|---|
| 3/4 | 1 1/4" | 1/2" | 300 psi @ 72° F | 0000000 | 00000 |
| 3/4 | 1 1/4" | 3/4" | 300 psi @ 72° F | 0000000 | 0000 |
| 1 | 1 7/16" | 1" | 300 psi @ 72° F | 0000000 | 0000 |
| 1 | 1 7/16" | 1 1/4" | 300 psi @ 72° F | 0000000 | 0000 |
| 1 1/2 | 2 1/8" | 1 1/4" | 225 psi @ 72° F | 0000000 | 0000 |
| 1 1/2 | 2 1/8" | 1 1/2" | 200 psi @ 72° F | 0000000 | 0000 |
| 2 | 2 1/2" | 2" | 200 psi @ 72° F | 0000000 | 0000 |
| 3 | 3 5/8" | 3" | 150 psi @ 72° F | 0000000 | 00000 |
| 4 | 4 3/4" | 4" | 50 psi @ 72° F | 0000000 | 00000 |
- Maximum Pressure: See table
- Temperature Range: -20° to 150° F
- Attachment Type: Use Worm-Drive Clamps or Band-and-Buckle Clamps
- Specifications Met: Fed. Spec. A-A-59326
Sockets | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Levers | Replacement Gaskets | Protective Plugs | |||||||||||
| Coupling Size | Socket ID | For Hose ID | No. of | Material | Pull Ring Material | Max. Pressure | Each | Pkg. Qty. | Pkg. | Each | |||
Polypropylene Plastic | |||||||||||||
| 3/4 | 1 1/4" | 1/2" | 2 | 304 Stainless Steel | Zinc-Plated Steel | 125 psi @ 72° F | 0000000 | 000000 | 10 | 0000000 | 00000 | 000000 | 00 |
| 3/4 | 1 1/4" | 3/4" | 2 | 304 Stainless Steel | Zinc-Plated Steel | 125 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000 | 00 |
| 1 | 1 7/16" | 1" | 2 | 304 Stainless Steel | Zinc-Plated Steel | 125 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000 | 00 |
| 1 | 1 7/16" | 1 1/4" | 2 | 304 Stainless Steel | Zinc-Plated Steel | 125 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000 | 00 |
| 1 1/2 | 2 1/8" | 1 1/2" | 2 | 304 Stainless Steel | Zinc-Plated Steel | 100 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 00000 | 000000 | 00 |
| 2 | 2 1/2" | 2" | 2 | 304 Stainless Steel | Zinc-Plated Steel | 100 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 00000 | 00000000 | 000000 |
| 3 | 3" | 3" | 2 | 304 Stainless Steel | Zinc-Plated Steel | 75 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 | 000000 | 00 |
- Maximum Pressure: See table
- Temperature Range: See table
- Attachment Type: Use Worm-Drive Clamps or Band-and-Buckle Clamps
- Specifications Met: Fed. Spec. A-A-59326 except for sockets with a 2" Socket ID
Sockets | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Levers | Replacement Gaskets | Protective Plugs | ||||||||||||
| Coupling Size | Socket ID | For Hose ID | No. of | Material | Pull Ring Material | Max. Pressure | Temp. Range, °F | Each | Pkg. Qty. | Pkg. | Each | |||
Polypropylene Plastic | ||||||||||||||
| 3/4 | 1 1/4" | 1/2" | 2 | 304 Stainless Steel | 304 Stainless Steel | 300 psi @ 72° F | -20° to 150° | 0000000 | 00000 | 10 | 0000000 | 00000 | 000000 | 00 |
| 3/4 | 1 1/4" | 3/4" | 2 | 304 Stainless Steel | 304 Stainless Steel | 300 psi @ 72° F | -20° to 150° | 0000000 | 0000 | 10 | 0000000 | 0000 | 000000 | 00 |
| 1 | 1 7/16" | 1" | 2 | 304 Stainless Steel | 304 Stainless Steel | 300 psi @ 72° F | -20° to 150° | 0000000 | 0000 | 10 | 0000000 | 0000 | 000000 | 00 |
| 1 | 1 7/16" | 1 1/4" | 2 | 304 Stainless Steel | 304 Stainless Steel | 300 psi @ 72° F | -20° to 150° | 0000000 | 0000 | 10 | 0000000 | 0000 | 000000 | 00 |
| 1 1/2 | 2 1/8" | 1 1/4" | 2 | 304 Stainless Steel | 304 Stainless Steel | 300 psi @ 72° F | -20° to 150° | 0000000 | 00000 | 10 | 0000000 | 00000 | 000000 | 00 |
| 1 1/2 | 2 1/8" | 1 1/2" | 2 | 304 Stainless Steel | 304 Stainless Steel | 300 psi @ 72° F | -20° to 150° | 0000000 | 00000 | 10 | 0000000 | 00000 | 000000 | 00 |
| 2 | 2" | 1 1/2" | 2 | 304 Stainless Steel | 304 Stainless Steel | 300 psi @ 72° F | 0° to 150° | 00000000 | 00000 | 10 | 0000000 | 00000 | 000000 | 00 |
| 2 | 2 1/2" | 2" | 2 | 304 Stainless Steel | 304 Stainless Steel | 225 psi @ 72° F | -20° to 150° | 0000000 | 00000 | 10 | 0000000 | 00000 | 00000000 | 000000 |
| 3 | 3 5/8" | 3" | 2 | 304 Stainless Steel | 304 Stainless Steel | 200 psi @ 72° F | -20° to 150° | 0000000 | 00000 | 10 | 0000000 | 00000 | 00000000 | 00000 |
| 4 | 4 3/4" | 4" | 3 | 304 Stainless Steel | 304 Stainless Steel | 150 psi @ 72° F | -20° to 150° | 0000000 | 00000 | 10 | 0000000 | 00000 | 00000000 | 00000 |
- Maximum Pressure: 225 psi @ 72° F
- Temperature Range: -20° to 150° F
- Attachment Type: Use Worm-Drive Clamps or Band-and-Buckle Clamps
- Specifications Met: Fed. Spec. A-A-59326
Sockets | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Levers | Replacement Gaskets | Protective Plugs | ||||||||||
| Coupling Size | Socket ID | For Hose ID | No. of | Material | Pull Ring Material | Each | Pkg. Qty. | Pkg. | Each | |||
Polypropylene Plastic | ||||||||||||
| 1 1/2 | 2 1/8" | 1 1/2" | 2 | 304 Stainless Steel | 304 Stainless Steel | 0000000 | 000000 | 10 | 0000000 | 000000 | 000000 | 00 |
| 2 | 2 1/2" | 2" | 2 | 304 Stainless Steel | 304 Stainless Steel | 0000000 | 00000 | 10 | 0000000 | 00000 | 00000000 | 000000 |
Cam-and-Groove Hose Couplings for Food and Beverage
Made of FDA listed materials, these couplings are suitable for food and beverage applications and won’t impart tastes or odors to the product. They also meet NSF/ANSI 61 safety standards for use with drinking water systems. A complete coupling consists of a plug and a socket (both sold separately) that allow you to quickly connect and disconnect medium-to large-diameter hose lines. To connect, insert the plug into the socket and press the levers down. The levers fit snugly into the groove on the plug’s body and force the plug against the gasket to form a tight seal. To disconnect, lift both levers and pull out the plug. Plugs and sockets are polypropylene, which is lightweight with good abrasion and corrosion resistance.
Plugs with barbed end are also known as E adapters. Insert the barbed end into rubber hose and secure with a clamp.
Sockets with barbed end are also known as C couplers. Insert the barbed end into hose and secure with a clamp.
Note: To ensure a correct fit, make sure that the plug and socket have the same coupling size.
Warning: Relieve all pressure before disconnecting the couplings. Do not use cam-and-groove couplings with compressed air or gas.
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: See table
- Temperature Range: 10° to 180° F
- Attachment Type: Use Worm-Drive Clamps or Band-and-Buckle Clamps
- Specifications Met: FDA Compliant 21 CFR 176.170
FDA Compliant 21 CFR 178.3297
NSF/ANSI 61
| Coupling Size | Plug OD | For Hose ID | Color | Max. Pressure | Each | |
Polypropylene Plastic | ||||||
|---|---|---|---|---|---|---|
| 3/4 | 1 1/4" | 1/2" | White | 125 psi @ 72° F | 000000000 | 00000 |
| 3/4 | 1 1/4" | 3/4" | White | 125 psi @ 72° F | 000000000 | 0000 |
| 1 | 1 7/16" | 1" | White | 125 psi @ 72° F | 000000000 | 0000 |
| 1 1/2 | 2 1/8" | 1 1/4" | White | 100 psi @ 72° F | 000000000 | 0000 |
| 1 1/2 | 2 1/8" | 1 1/2" | White | 100 psi @ 72° F | 00000000 | 0000 |
| 2 | 2 1/2" | 2" | White | 100 psi @ 72° F | 00000000 | 0000 |
| 3 | 3 5/8" | 3" | White | 50 psi @ 72° F | 00000000 | 00000 |
- Maximum Pressure: See table
- Temperature Range: 10° to 180° F
- Attachment Type: Use Worm-Drive Clamps or Band-and-Buckle Clamps
- Specifications Met: FDA Compliant 21 CFR 176.170
FDA Compliant 21 CFR 178.3297
NSF/ANSI 61
Sockets | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Levers | Replacement Gaskets | Protective Plugs | ||||||||||||
| Coupling Size | Socket ID | For Hose ID | Color | No. of | Material | Pull Ring Material | Max. Pressure | Each | Pkg. Qty. | Pkg. | Each | |||
Polypropylene Plastic | ||||||||||||||
| 3/4 | 1 1/4" | 1/2" | White | 2 | 304 Stainless Steel | Stainless Steel | 125 psi @ 72° F | 000000000 | 000000 | 10 | 0000000 | 000000 | 000000 | 00 |
| 3/4 | 1 1/4" | 3/4" | White | 2 | 304 Stainless Steel | Stainless Steel | 125 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 00000 | 000000 | 00 |
| 1 | 1 7/16" | 1" | White | 2 | 304 Stainless Steel | Stainless Steel | 125 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 00000 | 000000 | 00 |
| 1 1/2 | 2 1/8" | 1 1/4" | White | 2 | 304 Stainless Steel | Stainless Steel | 100 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 00000 | 000000 | 00 |
| 1 1/2 | 2 1/8" | 1 1/2" | White | 2 | 304 Stainless Steel | Stainless Steel | 100 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 | 000000 | 00 |
| 2 | 2 1/2" | 2" | White | 2 | 304 Stainless Steel | Stainless Steel | 100 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 | 0000000 | 000000 |
| 3 | 3 5/8" | 3" | White | 2 | 304 Stainless Steel | Stainless Steel | 50 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 | 0000000 | 00000 |