We will reply to your message within an hour.
This cord has excellent stretch recovery and won't become brittle.
Also known as bungee cord and shock cord, a fabric cover protects the inner elastic from abrasion.
Color-coded by the year and quarter of manufacture, this cotton-covered elastic cord meets MIL-C-5651.
Strap is wider than cord to distribute pressure across the load.
This cord won't become brittle or hard after exposure to sunlight.
Suitable for marine environments, this cord resist corrosion from salt water and chlorine.
Push the mounting plate into the collar to grip the cord.
Position these locks anywhere along a length of cord to create stops or separate cord from contact surfaces.
Adjust the location of the hook along the cord.
The thick wire coil on these hooks makes them stronger than standard hooks.
Attach these hooks to elastic cord to make a tie down.
Create a tie down by attaching these hooks to elastic strap.
Create a loop in elastic cord by snapping these fittings together.
These tie downs won't become brittle or hard after exposure to sunlight.
With the strength of plastic and the stretch of rubber, these polyurethane rubber tie downs have excellent stretch recovery and won't become brittle.
Cinch the loop around large anchor points.
Adjust the length by attaching the hook into a slot in the strap.
Also known as bungee cords and shock cords, these tie downs have an outer layer of fabric to protect the inner elastic from abrasion.
Heavy duty hooks and longer-lasting elastic cords make these tie downs stronger than standard abrasion-resistant tie downs.
Shorten the length of the tie downs between the hooks.
Suitable for marine environments, these tie downs resist corrosion from salt water and chlorine.
This belting has a smooth, easy-to-clean surface.
The textured surface improves gripping ability.
This polyurethane belting is reinforced with a polyester cord for strength.
Made of polyurethane, these belts resist chemicals and abrasion.
Often used with lathes and conveyors, these textured belts grip loads better than standard round belts, making sure heavy loads don’t slip.
Made of a specially formulated polyurethane, these belts prevent the static buildup that could damage sensitive equipment in your setup.
In addition to chemical resistance, these belts also provide increased abrasion resistance over heavy duty round belts.
These belts are reinforced with a polyester cord for strength.
Install these belts without dismantling your drive shafts—hook the ends together with the attached stainless steel connector.
Lengthen or shorten this polyurethane belting without tools or connectors—the interlocking links attach and detach with a twist.
The hollow core of this polyurethane belting allows you to join the ends without trimming, welding, or using special tools.
Use these flexible polyurethane foam cords and circles to cushion narrow spaces, such as channels and gaps.
Stronger than natural rubber, these polyurethane rods combine the shock-absorbing qualities of rubber with the tear resistance of plastic. Use them to seal narrow spaces such as channels.
Use these tubes as jackets, seals, and insulation in areas where rubbing and scraping could cause wear on rubber. They are made of polyurethane, which combines the shock-absorbing qualities of rubber with the tear resistance of plastic.
Multiple colors allow you to color-code your line for easy identification.
This multiple-line tubing holds together on its own, so there's no need for cable ties or tape.
With excellent resistance to abrasion and tearing, this tubing can hold up in rugged environments.
Keep your work site safe and clutter free–this coiled tubing extends when you need it and retracts out of the way when you don't.
Static electricity will not build up in this tubing, so you can use it near sensitive equipment.
A braid reinforcement gives this tubing excellent strength in high-pressure applications up to 250 psi.
Designed for use in welding applications, this tubing has multiple layers of material and is specially formulated to self-extinguish.
This tubing is soft enough to handle continuous bending and flexing, yet tough enough to resist tearing and abrasion.
Tubing meets NSF/ANSI Standard 61 for drinking water.
Sized for vibrating sifters, screeners, hoppers, and packaging equipment, this tubing has a diameter of 4" or larger to handle a variety of bulk food processing applications.