Made from 18-8 stainless steel, these blind rivets create a strong hold even in wet and damp areas. The domed head gives your project a finished appearance.

Lightweight and corrosion resistant, these blind rivets are made of aluminum. Install them in countersunk holes, and their angled head sits flush with the material’s surface.

You need access to only one side of the material to install these rivets.

A flexible shank allows these rivets to be removed and reused. You need access to only one side of the material to install.

Made of 18-8 stainless steel, these rivet nuts withstand water, mild chemicals, and outdoor conditions better than zinc-plated steel nuts. A ribbed body grips surrounding material to hold them in place, keeping them from spinning as you tighten screws.

Originally designed for Formula 1 racecars, these titanium rivet nuts are the best choice when you need a high strength-to-weight ratio—they're 40% lighter than steel nuts.

Our most twist-resistant round rivet nuts, these have both a ribbed body and wedges under the flange that bite into material to prevent spinning when tightening a screw. With a thick body for heavy duty applications, they match the strength of Grade 5 and Class 8 screws.

Ideal for wet and outdoor environments, these rivet nuts are made of stainless steel. Their hex-shaped body provides the highest twist resistance of any rivet nut.

Made of stainless steel, these rivet nuts hold up better outdoors than zinc-plated steel rivet nuts.

To grip all layers of a sandwich panel—the top, core, and bottom—these rivet nuts have a two-piece construction.

Everything you need to add threads to sheet metal in low-clearance areas. Along with low-profile rivet nuts, these kits include mandrels and an installation tool.

These low-profile rivet nuts are one-third the weight of steel and have mild corrosion resistance.

Install a rivet nut with only a screw—no special installation tool required.

The closed end on these nuts keeps debris from passing through the nut or damaging the threads.

A PVC foam seal under the flange keeps liquids and gasses from leaking between the nut and the surrounding material.

Threads float inside the nut so you can install a screw at a slight angle to align with off-center parts. They’re also known as Riv-Float nuts.

Use these hex drive screws and binding barrels as a low-profile alternative to standard nut and bolt combinations.

Everything you need to add threads to sheet metal, these assortments contain twist-resistant rivet nuts, mandrels, nosepieces, and a plier-style installation tool.