McMaster-Carr logo
    Filter by
    System of Measurement
    Flute Type
    Thread Type
    Industrial Info Compare
    Number of Flutes
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    DFARS Specialty Metals
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Pitch Diameter Limit
    Attribute Image
    Drill Bit Point Angle
    Industrial Info Snippet
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    59 Products

    Quick-Change Hex Shank Drill Taps for Drills and Screwdrivers

    Image of Product. Front orientation. Drill Taps. Quick-Change Hex Shank Drill Taps for Drills and Screwdrivers.
    Save time when you need to change drill taps frequently. The grooved shank snaps directly into drills, power screwdrivers, and other tools that accept a 1/4" hex shank. However, they’re not rated for impact drivers. With a drill bit point to drive into the workpiece, these taps can drill and tap holes in a single step. They’re made of high-speed steel and are for use on most metal and plastic.
    Their spiral flutes keep chips clear by drawing them back toward the tap and out of the hole. All have a plug chamfer with 3-5 chamfered cutting threads, so they’re suitable for start-to-finish tapping.
    Uncoated High-Speed Steel—Uncoated taps are strong enough for most tapping jobs but have the shortest tool life.
    Titanium Nitride (TiN)-Coated High-Speed Steel—Titanium Nitride (TiN) coated taps resist heat and wear better than uncoated taps, letting them last up to twice as long.
    Thread
    Drill Bit
    Plug Chamfer
    Size
    Lg.
    Overall
    Lg.
    Size
    Decimal Size
    Equiv.
    Point
    Angle
    Flute
    Type
    No. of
    Flutes
    Thread
    Type
    Pitch Dia.
    Limit
    Hex Shank
    Size
    Each
    Uncoated High-Speed Steel
    4-40
    		3/8"2 7/8"43 Ga.
    		0.089"118°Spiral2UNC
    		H21/4"3464A11000000
    6-32
    		7/16"3"36 Ga.
    		0.1065"118°Spiral2UNC
    		H31/4"3464A1200000
    8-32
    		1/2"3 1/8"29 Ga.
    		0.136"118°Spiral2UNC
    		H31/4"3464A1300000
    10-24
    		5/8"3 3/8"25 Ga.
    		0.1495"118°Spiral2UNC
    		H31/4"3464A1400000
    10-32
    		5/8"3 3/8"21 Ga.
    		0.159"118°Spiral2UNF
    		H31/4"3464A1500000
    1/4"-20
    		25/32"3 1/2"7 Ga.
    		0.201"118°Spiral2UNC
    		H31/4"3464A1600000
    1/4"-28
    		25/32"3 1/2"3 Ga.
    		0.213"118°Spiral2UNF
    		H31/4"3464A1700000
    5/16"-18
    		15/16"3 23/32"H
    		0.266"118°Spiral2UNC
    		H31/4"3464A1800000
    5/16"-24
    		15/16"3 23/32"I
    		0.272"118°Spiral2UNF
    		H31/4"3464A1900000
    3/8"-16
    		1 1/8"3 15/16"5/16"
    		0.3125"118°Spiral2UNC
    		H31/4"3464A2100000
    3/8"-24
    		1 1/8"3 15/16"Q
    		0.332"118°Spiral2UNF
    		H31/4"3464A2200000
    M4 × 0.7 mm1/2"3 1/8"3.3 mm
    		0.1299"118°Spiral2Metric
    		D41/4"3464A5100000
    M5 × 0.8 mm5/8"3 3/8"4.2 mm
    		0.1653"118°Spiral2Metric
    		D41/4"3464A5200000
    M6 × 1 mm25/32"3 1/2"5 mm
    		0.1968"118°Spiral2Metric
    		D51/4"3464A5300000
    M7 × 1 mm15/16"3 23/32"6 mm
    		0.2362"118°Spiral2Metric
    		D51/4"3464A5400000
    M8 × 1.25 mm15/16"3 23/32"6.7 mm
    		0.2637"118°Spiral2Metric
    		D51/4"3464A5500000
    M10 × 1.5 mm1 1/8"3 15/16"8.5 mm
    		0.3346"118°Spiral2Metric
    		D61/4"3464A5600000
     
    Titanium Nitride (TiN)-Coated High-Speed Steel
    6-32
    		7/16"3"36 Ga.
    		0.1065"118°Spiral2UNC
    		H31/4"3464A11100000
    8-32
    		1/2"3 1/8"29 Ga.
    		0.136"118°Spiral2UNC
    		H31/4"3464A11200000
    10-24
    		5/8"3 3/8"25 Ga.
    		0.1495"118°Spiral2UNC
    		H31/4"3464A11300000
    10-32
    		5/8"3 3/8"21 Ga.
    		0.159"118°Spiral2UNF
    		H31/4"3464A11400000
    1/4"-20
    		25/32"3 1/2"7 Ga.
    		0.201"118°Spiral2UNC
    		H31/4"3464A11500000
    1/4"-28
    		25/32"3 1/2"3 Ga.
    		0.213"118°Spiral2UNF
    		H31/4"3464A11600000
    5/16"-18
    		15/16"3 23/32"H
    		0.266"118°Spiral2UNC
    		H31/4"3464A11700000
    5/16"-24
    		15/16"3 23/32"I
    		0.272"118°Spiral2UNF
    		H31/4"3464A11800000
    3/8"-16
    		1 1/8"3 15/16"5/16"
    		0.3125"118°Spiral2UNC
    		H31/4"3464A11900000
    3/8"-24
    		1 1/8"3 15/16"Q
    		0.332"118°Spiral2UNF
    		H31/4"3464A12100000
    7/16"-14
    		1 1/4"4 3/4"U
    		0.368"118°Spiral2UNC
    		H31/4"3464A12200000
    7/16"-20
    		1 1/4"4 3/4"25/64"
    		0.3906"118°Spiral2UNF
    		H31/4"3464A12300000
    1/2"-13
    		1 3/8"5 1/16"27/64"
    		0.4219"118°Spiral2UNC
    		H31/4"3464A12400000
    1/2"-20
    		1 3/8"4 1/16"29/64"
    		0.4531"118°Spiral2UNF
    		H31/4"3464A12500000
    9/16"-18
    		1 5/8"5 1/2"33/64"
    		0.509"118°Spiral4UNF
    		H31/4"3464A13500000
    5/8"-11
    		1 3/4"6 1/16"17/32"
    		0.5313"118°Spiral4UNC
    		H31/4"3464A13600000
    5/8"-18
    		1 3/4"6 1/16"37/64"
    		0.5781"118°Spiral4UNF
    		H31/4"3464A13700000
    M3 × 0.5 mm3/16"1 27/64"3/32"
    		0.0984"110°Spiral2Metric
    		Not Rated1/4"3464A21100000
    M4 × 0.7 mm1/2"3 1/8"3.3 mm
    		0.1299"118°Spiral2Metric
    		D41/4"3464A12600000
    M5 × 0.8 mm5/8"3 3/8"4.2 mm
    		0.1653"118°Spiral2Metric
    		D41/4"3464A12700000
    M6 × 1 mm25/32"3 1/2"5 mm
    		0.1968"118°Spiral2Metric
    		D51/4"3464A12800000
    M8 × 1.25 mm15/16"3 23/32"6.7 mm
    		0.2637"118°Spiral2Metric
    		D51/4"3464A13100000
    M10 × 1.5 mm1 1/8"3 15/16"8.5 mm
    		0.3346"118°Spiral2Metric
    		D61/4"3464A13200000
    M12 × 1.75 mm1 3/8"5 1/16"10.2 mm
    		0.4015"118°Spiral2Metric
    		D61/4"3464A13300000
    M16 × 2 mm1 3/4"6 1/16"14 mm
    		0.5512"118°Spiral2Metric
    		D71/4"3464A13400000
     

    Hex-Bit Taps

    Image of Product. Front orientation. Taps. Hex-Bit Taps.
    You only need one tool to turn these taps and install screws. The 1/4" hex shank fits hand or powered screwdrivers for threading holes. Then switch to a screwdriver bit to finish the job. To tap in hard-to-reach spots, add a bit extension. Taps have straight flutes that are good for most jobs.
    High-Speed Steel—The most versatile taps resist heat and wear to stay sharp. They’re good for most metals and plastic.
    Uncoated—The economical choice, these won't last as long as coated taps.
    Plug Chamfer—Our go-to chamfer type, these thread both through holes and blind holes. The tapered section is shorter than a taper chamfer and longer than bottoming chamfer. As a result, they're easier to turn than bottoming taps but require more force than taper taps.
    Drill Bit
    Plug Chamfer
    Thread Size
    Thread
    Lg.
    Overall
    Lg.
    Thread
    Type
    No. of
    Flutes
    Size
    Decimal Size
    Equiv.
    Shank
    Type
    Hex Shank
    Size
    Each
    High-Speed Steel
     
    Uncoated
    1/4"-20
    		11/16"1 17/32"UNC
    		37 Ga.
    		0.201"Hex1/4"1021N11000000
    5/16"-18
    		3/4"1 9/16"UNC
    		4F
    		0.257"Hex1/4"1021N1200000
    3/8"-16
    		13/16"1 19/32"UNC
    		45/16"
    		0.3125"Hex1/4"1021N1300000
    M3 × 0.5 mm7/16"1 5/16"Metric
    		32.5 mm
    		0.0984"Hex1/4"1021N2100000
    M3.5 × 0.6 mm3/8"1 5/16"Metric
    		32.9 mm
    		0.1142"Hex1/4"1021N2200000
    M4 × 0.7 mm1/2"1 3/8"Metric
    		33.3 mm
    		0.1299"Hex1/4"1021N2300000
    M5 × 0.8 mm5/8"1 7/16"Metric
    		34.2 mm
    		0.1653"Hex1/4"1021N2400000
    M6 × 0.75 mm11/16"1 15/32"Metric
    		35.2 mm
    		0.2047"Hex1/4"1021N2600000
    M6 × 1 mm11/16"1 9/16"Metric
    		35 mm
    		0.1968"Hex1/4"1021N2500000
    M7 × 1 mm5/8"1 1/2"Metric
    		36 mm
    		0.2362"Hex1/4"1021N2700000
    M8 × 0.75 mm3/4"1 9/16"Metric
    		47.2 mm
    		0.2834"Hex1/4"1021N2900000
    M8 × 1.25 mm3/4"1 9/16"Metric
    		46.7 mm
    		0.2637"Hex1/4"1021N2800000
    M10 × 1 mm13/16"1 5/8"Metric
    		48.9 mm
    		0.3503"Hex1/4"1021N3200000
    M10 × 1.5 mm13/16"1 5/8"Metric
    		48.5 mm
    		0.3346"Hex1/4"1021N3100000
     

    Quick-Change Hex Shank Drill Tap Sets for Drills and Screwdrivers

    Image of Product. Front orientation. Drill Taps. Quick-Change Hex Shank Drill Tap Sets for Drills and Screwdrivers, Fabric Pouch.

    Fabric Pouch

    Image of Product. Front orientation. Drill Taps. Quick-Change Hex Shank Drill Tap Sets for Drills and Screwdrivers, Plastic Case.

    Plastic Case

    Drill and tap holes in a range of diameters. With a drill bit point to drive into the workpiece, these tools can drill and tap holes in a single step. They also save you time when changing from tool to tool. The grooved shank snaps directly to drills, power screwdrivers, and other tools that accept a 1/4" hex shank. However, they’re not rated for impact drivers. They’re made of high-speed steel and are for use on most metal and plastic.
    Their spiral flutes keep chips clear by drawing them back toward the tap and out of the hole. Recommended for use in through holes, all have a plug chamfer with 3-5 chamfered cutting threads, so they’re suitable for start-to-finish tapping.
    Titanium Nitride (TiN)-Coated High-Speed Steel—Titanium Nitride (TiN) coated taps resist heat and wear better than uncoated taps, letting them last up to twice as long.
    No. of
    Pieces
    Chamfer
    Type
    Tap Sizes Included
    No. of
    Flutes
    Drill Bit Sizes Included
    Container
    Type
    Includes
    Each
    Uncoated High-Speed Steel
    7Plug6-32
    8-32
    10-24
    1/4"-20
    5/16"-18
    3/8"-16    		25/16"
    36 ga.
    29 ga.
    25 ga.
    7 ga.
    F    		Fabric PouchChuck3464A310000000
    7PlugM3 × 0.5 mm
    M4 × 0.7 mm
    M5 × 0.8 mm
    M6 × 1.0 mm
    M8 × 1.25 mm
    M10 × 1.5 mm    		23/32"
    1/8"
    11/64"
    13/64"
    17/64"
    31/64"    		Plastic CaseChuck3464A32000000
     
    Titanium Nitride (TiN)-Coated High-Speed Steel
    7Plug6-32
    8-32
    10-24
    1/4"-20
    5/16"-18
    3/8"-16    		25/16"
    36 ga.
    29 ga.
    25 ga.
    7 ga.
    F    		Fabric PouchChuck3464A33000000
     
    back to top