Provide 360° of lighting with these lanterns. They have a daylight appearance that highlights white/blue tones, which is good for inspecting.

Style C have a handle that folds down for compact storage.

IP07-rated lanterns withstand temporary submersion, so they’ll still work if you drop them in water.

Safe for use in environments where hazardous material is present, these headlamps shine light on your work while keeping your hands free. With built-in LEDs, they produce more light, are more efficient, and generate less heat than headlamps with other light technologies. All cast a uniform beam that is especially good for close-up tasks and inspection work.

Note: Battery life is significantly reduced when headlamps are used at the high-beam light setting.

Hazardous location environmental ratings indicate where manufactures have included safety features in products to facilitate their safe use in hazardous environments. Before selecting a product for a hazardous location, ensure it is rated for your environment.

Rated IP07, this headlamp withstands temporary submersion in a maximum of one meter of water for up to 30 minutes. It shines light on your work while keeping your hands free. This headlamp has long-lasting, built-in LEDs that produce more light and generate less heat than other light technologies. It casts a uniform beam that's especially good for close-up tasks and inspection work. Headlamps come on an adjustable elastic strap for normal wear. For secure wear over a hard hat, they also come with a rubber strap and snap-together fastener.

Headlamps with a battery life indicator let you know how close the batteries are to needing replacement. An LED light glows green when battery life is above 80%, yellow when it’s between 20% and 80%, and red when it’s below 20%.

Headlamps with a dimmable light conserve battery life.

Clip these headlamps right into a mount on your tactical or rescue helmet. You can also clip them onto your gear’s MOLLE strap. These headlamps all have multiple LED color options for different scenarios. Use the red or blue beam in low-light environments to preserve your night vision. The blue beam lets you see more details and color differences than the red beam—you can even read. The green beam shows more contrast than red and blue beams, but it can interfere with your ability to see in dark conditions. Meeting ANSI/Plato F1, these lights have been tested for light output, impact resistance, and run time.

Style C project light the farthest of these headlamps. Tilt them up to 90° to point light where you need it. To view clear images through night-vision goggles in dim light or pitch black, switch them to infrared light. A digital lockout option keeps the beam from turning on accidentally. IP07-rated for temporary submersion, they’ll keep working if you drop them in water. These headlamps are compatible with NVG mounts and include a strap if you want to wear them without a helmet.

Light up work while staying visible in high-risk areas. These headlamps have LEDs on the head band so forklift and truck drivers can see you. You can set the lights to shine steady or flash. These headlamps are tested against ANSI/Plato FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Styles A and B have lights all around the head band for 360° visibility. You can turn the front and band light on separately or simultaneously. Battery life is measured when all lights are on. They include a rubber strap you can wrap around a hard hat—no hard hat clips required. These headlamps are rated for temporary submersion in water.

Style B headlamps will last a full shift. Quickly swap out their disposable batteries—no need to wait for a charge. Their reflective band keeps you visible to vehicles even when the light is turned off.

Headlamps with a spot beam have a bright center for lighting up long distances.

Always have a flashlight on hand—these attach to a key ring. All have a nonslip grip to ensure a secure hold. All keychain flashlights were tested and rated to ANSI/NEMA FL 1 standards.

Incandescent lights are the traditional lighting choice. Twist the head to change the beam from a wide floodlight to a narrow spotlight.

LED lights produce more light, are more efficient, and generate less heat than incandescent lights. They cast a flood beam, which is especially good for close-up tasks and inspection work.

Note: Battery life is significantly reduced when flashlights are used at the high-beam light setting.

For technical drawings and 3-D models, click on a part number.

Small enough to fit in your shirt pocket, these penlights safely light up work in explosion-prone areas. They’re intrinsically safe, meaning they cannot ignite an explosion. They’re also rated for areas with ignitable concentrations of flammable or combustible gases, vapors, and liquids. Ideal for close-up tasks and inspection work, their flood beam creates an even spread of light. Use the momentary light setting when you need light for brief periods—the light only turns on when you hold down the button. All have a nonslip grip so you don’t drop them.

These penlights have been tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

IP07-rated penlights can be temporarily submerged, so they’ll keep working if you drop them in water. They’re intrinsically safe for a broader range of hazardous locations than IP04-rated penlights. Use them in areas with ignitable concentrations of combustible dust, fibers, and other particles.

Hazardous location environmental ratings indicate where manufacturers have included safety features in products to facilitate their safe use in hazardous environments. Before selecting a product for a hazardous location, ensure it is rated for your environment.

Rated IP07, you can drop these penlights in water and they’ll still work. Plus, they’re small enough to fit in your pocket. They cast a spot beam with a bright center for long-distance illumination. These penlights are tested against ANSI/Plato FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Style A have a lockout setting so they don’t get turned on by accident.

Style B have a knurled grip that won’t slip out of your hand. If you need these penlights to work right away and can’t wait for a charge, they’ll run on two AAA disposable batteries, too.

All of these flashlights stand up to wet environments. They have a slip-resistant grip to ensure a secure hold.

IP07 flashlights withstand temporary submersion in a maximum of one meter of water for up to 30 minutes.

LED flashlights last longer, are more efficient, and generate less heat than krypton flashlights.

Spot beam flashlights have a bright center for long-distance illumination. Flood beam flashlights are especially good for close-up tasks and inspection work.

Styles A-E were tested and rated to ANSI/NEMA FL 1 standards.

CE marked flashlights meet European health, safety, and environmental protection requirements.

Style A have two lenses that can cast light from the top or side of the flashlight. Both have a magnet that allows you to mount them to a nearby surface and keep your hands free for work.

Style D have a detachable power bank with a USB connection for charging small devices, such as phones. When they’re separated, cover the exposed ends of the bank and flashlight with the included caps. These flashlights are dimmable, and they revert to their most recent brightness setting when you turn them on.