With a rounded, weighted base, these floodlights wobble—but don't fall over—when bumped. They're often used on high-traffic job sites. They shine light 360°.

Floodlights with an outlet let you connect multiple lights to one circuit—plug them into each other just like string lights.

IP54- and IP55-rated lights can work outdoors and in other damp environments—they seal out humidity and dripping, splashing, and falling liquids. They also stay protected in dusty conditions.

Light up remote spaces without having to keep track of a new cordless tool battery. These floodlights run on a Milwaukee M18 battery (sold separately). You can also power them with an extension cord (not included). These lights extend up to 7 ft. tall and have a pivoting head to direct light where you need it. When you're done using them, fold them up. They have a handle for easy transport.

Built to handle tough jobsites, their legs and plastic lens resist impact. And they’ll work outdoors and in other damp areas—rated IP54, they’re sealed against splashing liquid and humidity. Plus, they’re protected against dirty, dusty conditions.

Style B have three light heads for more than double the brightness of Style A. Each one pivots for multidirectional lighting. With a built-in M18 charger, you can charge the battery if you plug in an extension cord. They also have a USB port for charging phones and other devices.

Note: Battery life depends on the size of your battery.

Because these lights are compatible with DeWalt rechargeable batteries, you can keep one type of cordless tool battery on hand. Their head pivots to aim light where it's needed in areas that don't have electrical power service. Hang them by the hook or stand them up for hands-free illumination. To protect the LEDs, their plastic lens resists impact.

Style C are our brightest option—they have four LEDs instead of one.

Note: Battery life depends on the size of your battery.

Power these lights with the same battery as your other cordless tools. They run on a Milwaukee M18 battery (sold separately) to light up work where there’s no outlet. Their head pivots to aim light where you need it, and they’re small enough to easily move from workspace to workspace. Ideal for tough jobsites, their plastic lens resists impact. You can use them outdoors and in other damp areas—rated IP54, they’re sealed against splashing liquid and humidity. They’ll also work in dusty conditions.

Style A have flexible mounting options. They have a hook on top and a hook on the back of the handle that you can rotate for different hanging orientations.

Style B can clamp onto 1”-3” dia. pipes. They also have a magnetic base to mount to most metal surfaces. Their head pivots horizontally and vertically.

Style C throw focused light similar to a flashlight. They have a hook on the back of the handle.

Note: Battery life depends on the size of your battery.

From pipes to pallet racks to control panels—these lights clamp onto almost anything and swivel to direct light just where you need it. They have a magnetic base to attach to most metal surfaces and can also be used as freestanding lights. You won’t be tethered to an outlet or extension cord, since they use battery power. A battery life indicator tells you how much charge you have left. Even while charging, you can still use the light, so your job isn’t on hold. Fold the head down to take up less storage space.

IP rated, these lights are sealed to keep out humidity and dripping and splashing liquids. They’re also tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Style A are also IP rated for dust, so you can use them when sanding, grinding, and in other messy applications. They have a USB charger port for powering other things such as phones and earbuds. Style A with a hook can also be hung.

Splashes and drips are no problem for these lights. They don’t need an outlet, so you can bring them wherever you’re working. With a swivel hook and a magnet, you can attach them where convenient and aim light on your task. IP rated, they’re sealed to keep water from working its way in and causing failure. Their light mimics natural daylight to give you a crisp, clear light that’s good for inspecting.

Style C and D have a magnet on the kickstand. You can attach them to a metal surface and adjust the angle of the light. Fold the hook into the back when you’re not using it. Style D can shine like a flashlight when you need to peer into narrow spaces.

Keep your hands free by wearing a flashlight on your head. These headlamps have long-lasting, built-in LEDs that produce more light and generate less heat than other light technologies. An included strap secures the lamp to your head and adjusts for a comfortable fit.

Headlamps with a uniform beam are especially good for close-up tasks and inspection work. Headlamps with a bull's eye beam have a bright center that can reach long distances.

IP54 rated headlamps protect against dust and liquid splashed from all angles.

Headlamps that cannot be sold to Canada are restricted by local energy efficiency requirements.

Note: Battery life is significantly reduced when headlamps are used at the high-beam light setting.

Light up work even when your visor is up. These headlamps come with three attachments that fit with anything from your hard hat to your baseball cap. A strong magnet connects the light to the attachments, so swap between them in a snap. When you need close-up illumination, detach the light and hold it as a task light.

Rated IP54, these headlamps are sealed against dust and splashing liquids. They’re tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as brightness, battery life, and beam distance. On the high beam, these lamps will illuminate the length of a football field.

Twist the head to adjust from a narrow spotlight to a wide floodlight. These headlamps are rechargeable and include a spare rechargeable battery. If you aren’t near an outlet or you can’t wait for a recharge, they’ll also run on three disposable AAA batteries.

Light up work while staying visible in high-risk areas. These headlamps have LEDs on the head band so forklift and truck drivers can see you. You can set the lights to shine steady or flash. These headlamps are tested against ANSI/Plato FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Style C are a lower cost alternative that has a red light in back so people can see you when it is dark. However, they don’t have lights all around the head band. The front light has a dial to dim the light anywhere from high to low for precise lighting control. They are a good choice for wearing on your head rather than on a hard hat. Rated IP54, they’re sealed against dust and splashing water.

Headlamps with a flood beam cast a uniform spread of light that’s good for close-up tasks and inspection work.

On headlamps with color options, the red beam lets you see in low light without disrupting your night vision.

Small enough to fit in your pocket, these slim flashlights have built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. The bodies are knurled for a slip-resistant grip. All penlights were tested and rated to ANSI/NEMA FL 1 standards.

Penlights with a flood beam are especially good for close-up tasks and inspection work. Penlights with a spot beam have a bright center for long-distance illumination.

Adjustable-beam penlights change from a wide floodlight to a narrow spotlight with a twist of the head.

Styles G and H can operate on either the included rechargeable batteries or standard AAA alkaline batteries.

Note: Battery life is significantly reduced when flashlights are used at the high-beam light setting.

For technical drawings and 3-D models, click on a part number.

Clip these little flashlights to a baseball cap or a surface to light up your work. They cast a flood beam with a uniform spread of light that’s ideal for close-up tasks.

Styles A-D can clip onto the brim of a hat. These flashlights are also tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Style D have a magnetic back you can stick to metal surfaces, and their two-way clip fits over pockets, straps, and other surfaces. The head rotates 180° to aim light where you need it.

The red beam lets you see in low light without disrupting your night vision.

IP04- and IP54-rated flashlights are sealed to keep out dripping, splashing, and falling liquids, as well as humidity. IP54-rated flashlights are sealed against dust.