Compact and easy to carry, these ETL listed lights stand up to dripping, splashing, and falling liquids. The head adjusts up and down to direct light where it's needed. Their LEDs cast a cool light that highlights white and blue tones, which is good for inspecting.

Style B still work if you accidentally drop them in water—they’re IP67 rated. A USB-A power outlet on the back lets you charge your phone or other device.

Bring light to remote, wet areas. These floodlights are IP rated to handle humidity and dripping, splashing, and falling liquids. Adjust their tripod up and down to direct light as far as you need. They’re also quick to set up and move elsewhere at a moment’s notice.

Style C are best where it’s windy. Thanks to their weighted base and locking legs, they’ll handle gusts up to 40 mph. Twist the reflector to switch from a wide flood beam to a narrow spot beam for long-distance lighting. You can also pivot the head to aim light where you need it. When you run out of charge, no problem—plug them in and they’ll still work. The cord is built into the tripod, so it won’t get snagged. For easy transport, these floodlights have a handle and shoulder strap.

Floodlights with a vehicle plug or wire leads can be operated as long as needed using an external power source, such as your truck’s battery. Vehicle plugs fit into a standard outlet or a 12V DC power source using the included adapters.

Hang a string of lights overhead to brighten wet jobsites. IP rated, these lights are sealed to keep out dust and moisture from washdowns, splashes, and sprays, even outdoors. They have multiple heads, so you can light large areas. Daisy chain multiple strings together to cover an even larger area.

Style C are built the toughest to withstand extreme weather. You can use them in temperatures as low as -40° F and plunge them 3 ft. under water, and they’ll still work. These lights not only carry one of the toughest IP ratings but also the top NEMA rating for outdoors and use near oil and coolant. They cast light at a 200° angle, illuminating a broad area.

Safely light up large spaces where combustible gases and dust are normally present. Rated NEC Class I and II, these lights have a housing that contains any sparks or flames and seals out ignitable gases, vapors, and dust. They’re rated T5, an NEC hazardous location temperature classification. This means their surface temperature stays below 212° F to prevent them from reacting with nearby flammable substances. Made of lightweight, durable aluminum with a tempered glass lens, they withstand bumps and rough handling. They’re often used in chemical processing, refineries, and paint spray booths.

Unless noted, the plug and power supply on these lights are outdoor rated but are not explosion-proof rated. Electrical connections must be made outside the hazardous environment.

Style B are rated NEC Class III for use in areas with ignitable concentration of combustible fibers and other particles. Rated IP67, they’re dust tight and you can plunge them in 3 ft. of water for 30 mins. and they’ll still work. They won’t spark if dropped and they resist corrosion from salt water and damp conditions.

Flood hazardous areas with light—these lights are intrinsically safe, meaning they can’t cause an explosion or fire. Rated NEC Class I, II, III, and Zone 0, they’re safe to use in areas with ignitable concentrations of flammable or combustible gases, dust, and fibers. They’re often used in refineries, mines, and paint booths. Pivot their head up and down to direct light where you need it most. These lights are rechargeable, compact, and include a carrying case for easy transport to jobsites without power.

They’re durable enough to fall from 6 ft. and still work. The edges of the metal body are cushioned with rubber, and the lens is impact-resistant polycarbonate. Rated IP67, they are sealed against dust and water. You can drop them in water, and they’ll keep working. These lights are tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Mount them using the extendable swivel hook on the back or the magnet in the base. The hook also functions as a carrying handle. Add a tripod if there’s nowhere to mount the light and you need to position it higher than on the ground.

Aim light where you need it—even in explosion-prone spaces—by raising, lowering, and tilting these lights on their tripod. Rated NEC Classes I, II, III, and Zone 0, they’re safe to use near ignitable concentrations of flammable or combustible gas, dust, or fibers. Intrinsically safe, they’re designed not to create enough heat or sparks to trigger an explosion.

They’re durable enough to fall from 6 ft. and still work. The polycarbonate lens resists impact, and the sturdy steel body has rubber cushioning on the edges. Rated IP67, they’re completely dust tight and can be submerged in water and still work. They’re also tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Set these cordless lights up on the included tripod or mount them using the hook on the back or the magnet on the base. You can set these lights up quickly and move them elsewhere at a moment’s notice. The hook makes it easy to carry them around your jobsite and the carrying case fits both the light and the tripod.

Tilt the head on these flashlights to aim light exactly where it's needed. They have a flat bottom, so you can work hands-free without them rolling away. You can also stand them on their end to use them as a task light. These flashlights cast a spot beam with a bright center that reaches long distances. To let you know when to recharge, they have a status indicator. These flashlights meet ANSI/PLATO FL 1, so they’ve been tested for light output, impact resistance, and battery life. Each flashlight comes with a shoulder strap for easy transport.

Flashlights with a 340° head tilt have a handle that pivots open, so you can hang them from a ladder or pipe to light up work from above. If you hang them, they’re durable enough to keep working if they fall from 6 feet.

IP67-rated flashlights can be temporarily submerged, so they’ll keep working if you drop them in water. They’re also sealed against dust.

Safely light up work in explosion-prone areas. Rated NEC Class I, these flashlights are safe to use in areas with ignitable concentrations of flammable or combustible gases, vapors, and liquids.

IP67, IP07 and IP08 rated flashlights will still work after being temporarily submerged in water. IP67 rated lights are also sealed against dust.

Styles A-H are intrinsically safe. They cannot cause an explosion, so they're a better choice where hazardous material is present in normal operating conditions.

Style A have a second LED on the body that aims a flood beam downward to light up your footsteps. This LED can double as a task light—just stand these flashlights on their end or hang them up. They’ll also stick to metal surfaces with a magnet on the bottom and on the clip.

Style E can also work as a laser pointer. You can use the laser and spot beam separately or at the same time.

Flashlights with a spot beam have a bright center for long-distance illumination.

Tilt the head on these flashlights to point light where you need it in explosion-prone areas. Rated NEC Classes I and II, they’re safe to use where there are ignitable concentrations of flammable or combustible gases, vapors, liquids, and dust. Rated IP67, they seal out humidity and dripping, splashing, and falling liquids. They’re also dust-tight and will still work if temporarily submerged in water. These floodlights are tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, battery life, and impact resistance. For instance, they’ve been confirmed to still work if dropped from 6 feet.

Style A and B light up your footsteps with a second LED beneath the head that aims a flood beam downward. This LED can double as a task light—just tilt the head up to 90° and stand these flashlights on their end.

Style C are our brightest and most versatile option. For use as a task light, set them on their flat bottom or back. You can also hang them up on their hooks. Carry them around hands-free with the included strap. Those with a magnetic mount can be mounted to a wall or beam. The head still pivots 180° to adjust the direction of the light when they’re mounted with the magnet.

Flashlights with a spot beam have a bright center for long-distance illumination. Flashlights with a flood beam cast a uniform spread of light that’s good for close-up tasks and inspection work.

Hazardous location environmental ratings indicate where manufacturers have included safety features in products to facilitate their safe use in hazardous environments. Before selecting a product for a hazardous location, ensure it is rated for your environment.

Light up work without risking an explosion. NEC rated, these headlamps are safe to use in areas with ignitable concentrations of flammable or combustible gases, vapors, and liquids. Swap the elastic strap with the included rubber strap to wear them around a hard hat—no clips required. To attach them to a welding helmet, use the included snap-together fastener. IP rated, you can drop them in water and they’ll still work. These headlamps are tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Intrinsically safe headlamps cannot cause an explosion, so they're a better choice where hazardous material is present in normal operating conditions.

Hazardous location environmental ratings indicate where manufacturers have included safety features in products to facilitate their safe use in hazardous environments. Before selecting a product for a hazardous location, ensure it is rated for your environment.