Outdoor Portable Work Lights

Filter by

Environment

Voltage

Light Technology

Mount Type

Overall Length

Electrical Connection

Lens Clarity

Switch Type

Cord Length

REACH

RoHS

Wattage

Certification

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

Enclosure Rating

Outlet Included

Lens Material

Bulbs Included

Brightness

10,000 lm to 19,999 lm

100,000 lm or greater

Color

Color Temperature

American Wire Gauge (AWG)

Cable Designation

Cord Color

Plug Number of Blades

Forward

How can we improve?

26 Products

About Hazardous Location Environmental Ratings

About Light Appearance

About Brightness

As bright as stadium lights, these floodlights are the most powerful in our offering—they’ll brighten jobsites half the size of a football field. They run on a diesel generator you can use to power other lights and tools in the field. Also known as light towers, they rise up to 23 ft. To direct light where you want it, pivot any of the four heads. You can also rotate the mast, even if it’s already raised.

Rated IP65, these floodlights are protected against dust and low-pressure washdowns. That means rain won’t be a problem. They’ll also handle winds up to 65 mph. Just secure the hitch and two side supports to the ground with the attached leveling jacks. These floodlights will work in the cold, but not in subzero temperatures.

For towing from jobsite to jobsite, these floodlights have a trailer with a ball hitch and tongue. They also come with safety chains, which have a 7,800-lb. load capacity. The trailer’s lights are D.O.T. approved for road use.

	Overall			Head					Run Time
Maximum Continuous Watts, kW	Ht. Range, ft.	Lg., ft.	Wd., ft.	Ht.	Wd.	Wt., lbs.	Brightness, lumens	Temp. Range, °F	Lights Only, hrs.	Full Load, hrs.	Fuel Tank Capacity, gal.	Volume @ Distance	Outlet Included	Output Voltage (Output Current)	Cannot Be Sold To		Each
Built-In LED
2.4	8 1/2-23	10	4 3/4	42"	48"	1,440	188,000	0° to 120°	160	140	39.9	67 dB @ 23 ft.	Yes	120V AC (20 A)	Canada	0000000	0000000000
6	8 1/2-23	10	4 3/4	42"	48"	1,600	188,000	0° to 120°	160	65	39.9	67 dB @ 23 ft.	Yes	120V AC (20 A) 240V AC (30 A)	Canada	0000000	000000000

Wet-Location Plug-In Portable String Lights

Hang a string of lights overhead to brighten wet jobsites. IP rated, these lights are sealed to keep out dust and moisture from washdowns, splashes, and sprays, even outdoors. They have multiple heads, so you can light large areas. Daisy chain multiple strings together to cover an even larger area.

Style D are built the toughest to withstand extreme weather. You can use them in temperatures as low as -40° F and plunge them 3 ft. under water, and they’ll still work. These lights not only carry one of the toughest IP ratings but also the top NEMA rating for outdoors and use near oil and coolant. They cast light at a 200° angle, illuminating a broad area.

		Head
Style	Overall Lg., ft.	Lg.	Wd.	No. of Bulb Heads	Bulb Spacing, ft.	Max. No. of Strings per Circuit	Brightness, lumens	Light Appearance	Outlet Included	Wire Gauge	Mount Type	Environmental Rating	Color		Each
Built-In LED
D	50	11"	2"	3	16	24	4,200	Neutral (4000K)	Yes	14	Suspension	IP67, NEMA 6P	Yellow	0000000	0000000

Wet-Location Magnet-Mount Portable Lights

Pop these lights on magnetic surfaces to brighten wet spaces. Rated NEMA 6 and ETL listed, you can splash, spray, or dunk them in water, and they’ll keep working. Strong magnets on the back keep them from sliding down or shaking loose. You can also secure them with a chain (not included) from the eyebolt at the top.

Style A and D have a handle for carrying the lights to your worksite.

Lights with an outlet included can be connected together to avoid running separate extension cords. Link up to 10 lights on one circuit. For increased spacing between lights, you can add an extension cord between them.

	Overall
Style	Lg.	Wd.	Dp.	Brightness, lumens	Light Appearance	Cord Lg., ft.	Electrical Connection Type	Outlet Included	Max. Outlet Current	Wire Gauge	Mount Type	Environmental Rating	Specifications Met	Color		Each
Built-In LEDs
A	12"	12"	9 1/2"	4,000	Cool (5000K)	6	Three-Prong Plug	No	__	18	Eyebolt, Magnetic	NEMA 6	ETL Listed, C-ETL Listed	Yellow	00000000	0000000
B	11 3/4"	6 1/4"	6 5/8"	1,100	Cool (5000K)	6	Three-Prong Plug	Yes	10A	18	Eyebolt, Magnetic	NEMA 6	ETL Listed, C-ETL Listed	Yellow	00000000	000000
C	12 1/2"	5"	3 1/2"	1,200	Cool (5000K)	6	Three-Prong Plug	No	__	18	Eyebolt, Magnetic	NEMA 6	ETL Listed, C-ETL Listed	Yellow	00000000	000000
D	26"	7"	5 3/16"	4,400	Cool (5000K)	6	Three-Prong Plug	No	__	18	Eyebolt, Magnetic	NEMA 6	ETL Listed, C-ETL Listed	White	00000000	000000
D	50"	7"	5 3/16"	8,800	Cool (5000K)	6	Three-Prong Plug	No	__	18	Eyebolt, Magnetic	NEMA 6	ETL Listed, C-ETL Listed	White	00000000	000000

Wet-Location Portable Lights

With PTFE
Plastic
Lens

With
Tempered
Glass Lens

Light up damp areas—these lights seal out moisture and humidity. They’ll even work in areas with frequent washdowns. Rated NEMA 4X, they withstand spraying liquid, resist corrosion, and keep out dust. Use them with medium-base, screw-in CFL (compact fluorescent), halogen, incandescent, and LED bulbs (sold separately).

PTFE plastic lenses are impact resistant.

Tempered glass lenses are more durable than plastic lenses. They have a zinc-plated steel guard to protect them.

Overall										Hook
Lg.	Dia.	Cord Lg., ft.	Wattage	Color	Handle Material	Environmental Rating	Voltage	Electrical Connection Type	Wire Gauge	Material	Adjustability		Each
For Replaceable CFL, Halogen, Incandescent, LED Bulbs
With PTFE Plastic Lens
10"	5"	25	100W	Yellow	Plastic	NEMA 4X	120V AC	Two-Prong Plug	16	Plastic	Swivel	0000000	0000000
10"	5"	50	100W	Yellow	Plastic	NEMA 4X	120V AC	Two-Prong Plug	16	Plastic	Swivel	0000000	000000
With Tempered Glass Lens
18"	4 3/4"	__	100W	Yellow	Rubber	NEMA 4X	120V AC	Hardwire	16	Aluminum	Swivel	0000000	000000
18"	4 3/4"	25	100W	Yellow	Rubber	NEMA 4X	120V AC	Three-Prong Plug	16	Aluminum	Swivel	0000000	000000
18"	4 3/4"	50	100W	Yellow	Rubber	NEMA 4X	120V AC	Three-Prong Plug	16	Aluminum	Swivel	0000000	000000

Replacement Tempered Glass Lens	0000000	Each	000000
Replacement PTFE Plastic Lens	0000000	Each	000000

Explosion-Proof Freestanding Portable Floodlights

Safely light up large spaces where combustible gases and dust are normally present. Rated NEC Class I and II, these lights have a housing that contains any sparks or flames and seals out ignitable gases, vapors, and dust. They’re rated T5, an NEC hazardous location temperature classification. This means their surface temperature stays below 212° F to prevent them from reacting with nearby flammable substances. Made of lightweight, durable aluminum with a tempered glass lens, they withstand bumps and rough handling. They’re often used in chemical processing, refineries, and paint spray booths.

Unless noted, the plug and power supply on these lights are outdoor rated but are not explosion-proof rated. Electrical connections must be made outside the hazardous environment.

Style A can withstand extreme weather and washdowns. Rated NEMA 6P, you can plunge them 6 ft. underwater for 24 hrs. and they’ll still work. They’re easy to move around since they weigh just 10 lbs. Rubber bumpers prevent damage if they’re bumped or dropped. Those with an explosion-proof power supply have a sealed enclosure, so you can make safe electrical connections within the hazardous environment. Their power supply and plug are explosion-proof rated.

Floodlights

A (Shown with Stand
and Magnetic Mount,
Sold Separately)

	Head		Overall
Style	Ht.	Wd.	Ht.	Wd.	Dp.	Brightness, lumens	Light Appearance	Cord Lg., ft.	Electrical Connection Type	Outlet Included	Wire Gauge	Environmental Rating	Color		Each
Built-In LED with Standard Power Supply
A	12 3/4"	6 1/2"	12 3/4"	6 1/2"	5 1/4"	11,500	Daylight (6000K)	100	3-Prong Plug	No	16	NEC Class I Divisions 1, 2 Groups C, D NEC Class II Divisions 1, 2 Groups E, F, G NEMA 6P	Green	0000000	000000000
Built-In LED with Explosion-Proof Power Supply
A	12 3/4"	6 1/2"	12 3/4"	6 1/2"	5 1/4"	11,500	Daylight (6000K)	100	3-Prong Plug	No	16	NEC Class I Divisions 1, 2 Groups C, D NEC Class II Divisions 1, 2 Groups E, F, G NEMA 6P	Green	0000000	00000000

Magnet Mounts for Style A

Add a magnet mount to attach these lights to most metal surfaces.

Overall Lg.	Material	Color		Each
7 1/2"	Aluminum	Green	00000000	0000000

Stands for Style A

Use a stand for a stable way to position the light higher than on the ground. The stand must be used with the magnet mount (sold separately).

Overall Ht.	Base Dia.	Material	Color		Each
24"	23"	Aluminum, Stainless Steel	Green	00000000	0000000

Lens Protectors for Style A

Add a lens protector to these lights to shield the lens from scratching during abrasive blasting and other harsh tasks.

Ht.	Wd.		Each
8 1/2"	4 1/2"	00000000	000000

Diffusers for Style A

Use a diffuser to disperse the light for broad coverage and minimal glare.

Ht.	Wd.		Each
8 1/2"	4 1/2"	00000000	0000000

Explosion-Proof Portable Lights

Lights

Bring light to explosion-prone work areas. Rated NEC Class I, these lights are safe to use in areas with ignitable concentrations of flammable or combustible gases, vapors, and liquids. The housing of these lights contains fire and sparks, so they don’t ignite what’s in your environment. They’re often used in mines and underground drilling. All also meet NEMA 4X, meaning they withstand spraying liquid, resist corrosion, and keep out dust. Use the hook to hang them where you need them. These lights come with a standard three-prong plug, so electrical connections must be made outside of the hazardous environment. Alternatively, you can add a hazardous location plug.

Style A weigh less than 2 pounds, so you can hold them without your hand and arm tiring. Rated IP66, they’re dust tight and sealed against washdowns. A protective lens keeps the LEDs from getting damaged while diffusing light evenly. Their compact design fits in narrow and low-clearance spaces. Add a mounting clamp to clip to a pipe or other surface. The clamp swivels so you can aim the light where you need it.

Style B are rated NEC Class II for use in areas with combustible dust. The guard and hook are made of copper-free aluminum, which minimizes the chance of creating sparks if you drop or bump them. To stand up to frequent use, a tempered borosilicate glass lens protects the bulb and the handle is made of impact-resistant glass.

Hazardous location environmental ratings indicate where manufacturers have included safety features in products to facilitate their safe use in hazardous environments. Before selecting a product for a hazardous location, ensure it is rated for your environment.

	Overall
Style	Lg.	Dia.	Brightness, lumens	Light Appearance	Cord Lg., ft.	Outlet Included	Wire Gauge	Mount Type	Environmental Rating	Specifications Met	Color		Each
Built-In LED
A	7"	5"	1,700	Cool (5000K)	25	No	16	Hook	NEC Class I Divisions 1, 2 Groups C, D NEC Class I Division 2 Groups A, B NEMA 4X IP66	CSA-US Certified, CSA Certified	Black	000000	0000000
For Replaceable LED
B	15 1/2"	5 1/2"	850	Cool (5000K)	50	No	16	Hook	NEC Class I Divisions 1, 2 Groups C, D NEC Class II Divisions 1, 2 Groups F, G NEMA 4X	ETL Listed, C-ETL Listed	Blue/Silver	000000	000000

Clamps for Style A

Clamp Shown with Light (Sold Separately)

Clamp

Grip Range	Dia.	Lg.	Material		Each
1"-1.875"	1 1/2"	6 1/2"	Aluminum	000000	0000000

Replacement Lenses for Style B

		Each
	000000	0000000

Explosion-Proof String Lights

Safe to use in areas with ignitable concentrations of flammable or combustible gases, vapors, liquids, and dust, these lights are rated NEC Class I, Class II, and Zone 1. Their housing contains fire and sparks, so they don’t ignite what’s in your environment. They’re often used in refineries, mines, and paint booths. Rated IP66, they’re also dust tight and sealed against sprays of water such as those used in washdowns. Since each head weighs less than 2 lbs., they’re easy to hang overhead. Each head has two straps for mounting on pipes, beams, or other surfaces. For more precise control over where the light is directed, add mounting clamps (sold separately). One clamp is required for each head.

These lights come with a standard three-prong plug, so electrical connections must be made outside of the hazardous environment. Alternatively, you can add a hazardous location plug.