24V DC Positioning Slides

Filter by

System of Measurement

Stroke Length

Voltage

Overall Length

Dynamic Horizontal Load Capacity

Dynamic Vertical Load Capacity

Maximum Speed

Carriage Length

Carriage Width

Material

Mounting Hole Thread Size

Thread Size

Height

Carriage Material

Input Voltage

Overall Height

Length

RoHS

Compliant with Exemptions

Extended Length

Export Control Classification Number (ECCN)

REACH

Controller Height

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

DFARS Specialty Metals

Exempt

Lubrication

Lubricated

Overload Protection Type

41 Products

Electric Positioning Slides with Automated Controls

Controller

(Included)

Slide

With an included controller and an integrated stepper motor, these slides are a complete precision motion control system. The stepper motor moves the low-friction ball screw and carriage smoothly at high speeds, similar to an inkjet printer head. To make sure the carriage is in the right place, the built-in encoder sends data to the controller. At -0.02 to 0.02 mm, these slides have a repeatability thinner than a single strand of hair, so the carriage hits the same spot every time. They work well in automated assemblies and other processes requiring accurate, repeatable motion.

For the initial setup, program the slides using the free, downloadable software, THK D-STEP. No coding necessary—simply enter the target position, speed, and acceleration for up to 16 different slides. This software also records position, speed, and motor current data, so you can monitor performance, optimize motion, and troubleshoot issues.

After the initial setup, the controller stores and runs sequences of up to 512 unique steps on its own. The controller also communicates with other devices such as PLCs, switches, and sensors. This means it can be integrated into a larger automated system to react to or trigger other processes as the carriage moves.

Dynamic load capacity is the maximum load slides can move. If you increase the speed, the dynamic load capacity decreases. Use a load-speed chart to confirm which slides will work for your application. Click on a part number and select "Product Detail" to view the chart.

Travel Distance per Turn—Travel distance per turn, also known as screw lead, is how far the carriage moves with one rotation of the ball screw.

	Dynamic Load Cap., lb.					Overall, mm			Carriage
	Horiz.	Vert.	Max. Speed, mm/s	Travel Distance per Turn, mm	Repeatability, mm	Lg.	Wd.	Ht.	Lg., mm	Wd., mm	Bearing Type	Base Material	Full Load Current, amp	Voltage, V DC	Operating System Compatibility		Each
100 mm Stroke Length



		2	1	300	6	-0.02 to 0.02	346	32	39	66.4	28	Ball	Aluminum	1.5	24	Windows XP or Later	4106N11	000000000


		13	4	500	12	-0.02 to 0.02	356	50	55	71	44	Ball	Aluminum	1.5	24	Windows XP or Later	4106N28	00000000
		22	11	300	6	-0.02 to 0.02	356	50	55	71	44	Ball	Aluminum	1.5	24	Windows XP or Later	4106N23	00000000


		200 mm Stroke Length



				2	1	300	6	-0.02 to 0.02	446	32	39	66.4	28	Ball	Aluminum	1.5	24	Windows XP or Later	4106N12	00000000


				13	4	500	12	-0.02 to 0.02	456	50	55	71	44	Ball	Aluminum	1.5	24	Windows XP or Later	4106N29	00000000
				22	11	300	6	-0.02 to 0.02	456	50	55	71	44	Ball	Aluminum	1.5	24	Windows XP or Later	4106N24	00000000


				300 mm Stroke Length



						2	1	300	6	-0.02 to 0.02	546	32	39	66.4	28	Ball	Aluminum	1.5	24	Windows XP or Later	4106N13	00000000


						13	4	500	12	-0.02 to 0.02	556	50	55	71	44	Ball	Aluminum	1.5	24	Windows XP or Later	4106N31	00000000
						22	11	300	6	-0.02 to 0.02	556	50	55	71	44	Ball	Aluminum	1.5	24	Windows XP or Later	4106N25	00000000


						400 mm Stroke Length



								13	4	500	12	-0.02 to 0.02	656	50	55	71	44	Ball	Aluminum	1.5	24	Windows XP or Later	4106N32	00000000


								22	11	300	6	-0.02 to 0.02	656	50	55	71	44	Ball	Aluminum	1.5	24	Windows XP or Later	4106N26	00000000


								500 mm Stroke Length



										13	4	500	12	-0.02 to 0.02	756	50	55	71	44	Ball	Aluminum	1.5	24	Windows XP or Later	4106N33	00000000


										22	11	300	6	-0.02 to 0.02	756	50	55	71	44	Ball	Aluminum	1.5	24	Windows XP or Later	4106N27	00000000


										600 mm Stroke Length



												13	4	460	12	-0.02 to 0.02	862	60	60.5	75	53	Ball	Aluminum	1.5	24	Windows XP or Later	4106N35	00000000


												22	11	230	6	-0.02 to 0.02	862	60	60.5	75	53	Ball	Aluminum	1.5	24	Windows XP or Later	4106N34	00000000

Low-Profile Electric Positioning Slides with Automated Controls

Less than one-third the height of standard electric positioning slides, these slides push and pull small parts in electronics manufacturing, robotics, and other automated processes. They have a magnetic linear motor to generate fast and precise motion while taking up only a tiny footprint. With a controller and driver also included, they’re an all-in-one actuation system. Use them where extreme precision is needed—they have a repeatability of -0.5 to 0.5 microns, which is ¹⁄₅₀₀₀₀ of an inch.

Download free CME2 software during initial setup for easy, point-and-click programming. Controllers using CME2 can store and run sequences of up to 32 steps. For added speed and flexibility, these slides are also compatible with CPL, used to write advanced custom programs.

					Overall, mm			Carriage
	Dynamic Horiz. Load Cap., lb.	Max. Speed, mm/s	Travel Distance per Full Step, mm	Repeatability, μm	Lg.	Wd.	Ht.	Lg., mm	Wd., mm	Bearing Type	Base Material	Full Load Current, amp	Voltage, V DC	Operating System Compatibility		Each
10 mm Stroke Length



		1	500	0.0005	-0.5 to 0.5	62	38	11	38	26	Ball	Nickel-Plated Steel	3	24	Windows 10 or Later	6468N11	000000000


		18 mm Stroke Length



				1	500	0.0005	-0.5 to 0.5	86	38	11	54	26	Ball	Nickel-Plated Steel	3	24	Windows 10 or Later	6468N12	00000000

Low-Temperature Electric Positioning Slides

Slide

Controller

(Included)

Precisely position parts in conditions as cold as -90° F. These slides contain a grease that lubricates even in low temperatures. With an integrated stepper motor, they’re a complete motion control system for automated assemblies. A controller is included, so you can adjust the speed, timing, and positioning. These slides are often used in actions that require fine, repeatable movement, such as drilling, fastening, assembly, and measuring. The carriage extends the same distance every time within -0.02 to 0.02 mm, a margin thinner than a sheet of paper.

436 mm Overall Length—436 mm lg. slides come pre-programmed with no extra software required.

Travel Distance per Full Step—Travel distance per full step determines the control you have over the slide’s positioning. The smaller the measurement, the finer positioning control you have.

Travel Distance per Turn—Travel distance per turn, also known as screw lead, is how far the carriage moves with one rotation of the ball screw.

Cords—Use a USB cord (sold separately) and free downloadable software to program the controller for slides that are not 436 mm long.

	Slides																	Cords
	Dynamic Load Cap., lb.			Travel Distance per, mm			Overall, mm			Carriage
	Horiz.	Vert.	Max. Speed, mm/s	Full Step	Turn	Repeatability, mm	Lg.	Wd.	Ht.	Lg., mm	Wd., mm	Bearing Type	Base Material	Full Load Current, amp	Voltage, V DC		Each		Each
100 mm Stroke Length



		44	16	500	0.06	12	-0.02 to 0.02	336	60	57.5	102	50	Roller	Aluminum	2.4	24	6449N21	000000000	6449N17	0000000


		200 mm Stroke Length



				44	16	500	0.06	12	-0.02 to 0.02	436	60	57.5	102	50	Roller	Aluminum	2.4	24	6449N12	00000000	———	0


				88	22	250	0.08	16	-0.02 to 0.02	482	70	79	122	60	Roller	Aluminum	5.2	24	6449N24	00000000	6449N17	000000


				300 mm Stroke Length



						44	16	500	0.06	12	-0.02 to 0.02	536	60	57.5	102	50	Roller	Aluminum	2.4	24	6449N23	00000000	6449N17	000000


						400 mm Stroke Length



								88	22	250	0.08	16	-0.02 to 0.02	682	70	79	122	60	Roller	Aluminum	5.2	24	6449N25	00000000	6449N17	000000


								600 mm Stroke Length



										88	22	250	0.08	16	-0.02 to 0.02	882	70	79	122	60	Roller	Aluminum	5.2	24	6449N26	00000000	6449N17	000000

Miniature Electric Actuators with Automated Controls


Rod Style	Slide Table Style

Smaller than any other actuator in our offering, these actuators’ short stroke length makes them good for automating fine, precise adjustments. They’re often used for aligning, pressing, and diverting. They come with an all-in-one motion control system to set the speed, timing, and position with buttons—no programming is required.

Rod-Style Actuator—Rod-style actuators have threads on the front of the rod.

Slide-Table-Style Actuator—Slide table-style actuators give you setup flexibility, since you can mount equipment on top or in front. Mount on top to reduce the space you need to move a full stroke length.

Programming Cables—Actuators with 6 5/8" retracted lg. come pre-programmed with no extra software required. For all other actuators, use a programming cable (sold separately) and free downloadable software to program the controller.

	Actuators															Programming Cables
	Lg.				Dynamic Load Cap., lb.				Extension Rod
	Stroke	Retracted	Voltage, V DC	Full Load Current, amp	Horizontal	Vertical	Max. Speed, in/sec	Repeatability, mm	Type	End Type	Dia.	Thread Size	Enclosure Rating		Each		Each
Rod-Style Actuator



		1"	5 3/8"	24	0.9	2	1	5.91	-0.05 mm/0.05 mm	Nonrotating	Threaded	0.47"	M4 × 0.7 mm	IP40	6508N31	0000000	6449N17	0000000


		1"	5 7/8"	24	2.2	4	3	7.87	-0.05 to 0.05	Nonrotating	Threaded	0.55"	M5 × 0.8 mm	IP40	6508N41	000000	6449N17	000000
		2"	6 1/2"	24	0.9	2	1	5.91	-0.05 to 0.05	Nonrotating	Threaded	0.47"	M4 × 0.7 mm	IP40	6508N32	000000	6449N17	000000
		2"	6 7/8"	24	2.2	4	3	7.87	-0.05 to 0.05	Nonrotating	Threaded	0.55"	M5 × 0.8 mm	IP40	6508N42	000000	6449N17	000000
		3"	7 7/8"	24	0.9	2	1	5.91	-0.05 to 0.05	Nonrotating	Threaded	0.47"	M4 × 0.7 mm	IP40	6508N33	000000	6449N17	000000
		3"	8 1/4"	24	2.2	4	3	7.87	-0.05 to 0.05	Nonrotating	Threaded	0.55"	M5 × 0.8 mm	IP40	6508N43	000000	6449N17	000000


		Slide-Table-Style Actuator



				1"	5 1/2"	24	0.9	2	1	5.91	-0.05 mm/0.05 mm	Nonrotating	Unthreaded	0.47"	—	IP40	6454N31	000000	6449N17	000000


				1"	6"	24	2.2	4	3	7.87	-0.05 to 0.05	Nonrotating	Unthreaded	0.55"	—	IP40	6454N41	000000	6449N17	000000
				2"	6 5/8"	24	0.9	2	1	5.91	-0.05 to 0.05	Nonrotating	Unthreaded	0.47"	—	IP40	6454N12	000000	———	0
				2"	9"	24	2.2	4	3	7.87	-0.05 mm/0.05 mm	Nonrotating	Unthreaded	0.55"	—	IP40	6454N42	000000	6449N17	000000

Clean Room Electric Positioning Slides

Slide

Controller

(Included)

Prevent dust from circulating while precisely positioning parts for drilling, fastening, assembly, and measuring. These slides have a built-in vacuum port to remove fine particles that could damage electronics or contaminate batches in clean rooms. Because they have an integrated stepper motor with an included controller, you can adjust the speed, timing, and positioning. At -0.02 to 0.02 mm, these slides have a repeatability thinner than a single sheet of paper, so the carriage hits the same spot every time. Unlike air-powered actuators, they’ll hold their position even if power fails. They’re also more energy efficient.

814.5 mm Overall Length—814.5 mm lg. slides come pre-programmed with no extra software required.

Maximum Speed—Maximum speed is how fast the slide will move under no-load conditions. If you increase the load, the slide speed will decrease.

Travel Distance per Full Step—Travel distance per full step determines the control you have over the slide’s positioning. The smaller the measurement, the finer positioning control you have.

Travel Distance per Turn—Travel distance per turn, also known as screw lead, is how far the carriage moves with one rotation of the ball screw.

Cords—Use a USB cord (sold separately) and free downloadable software to program the controller for slides that are not 814.5 mm long.

	Slides																		Cords
	Dynamic Load Cap., lb.			Travel Distance per, mm			Overall, mm			Carriage
	Horiz.	Vert.	Max. Speed, mm/s	Full Step	Turn	Repeatability, mm	Lg.	Wd.	Ht.	Lg., mm	Wd., mm	Bearing Type	Base Material	Full Load Current, amp	Voltage, V DC	Clean Room Std.		Each		Each
200 mm Stroke Length



		110	44	250	0.08	8	-0.02 to 0.02	541	70	84	122	60	Ball	Aluminum	5	24	Fed. Std. Class 10, ISO Class 4	6833N32	000000000	6449N17	0000000


		143	50	250	0.1	10	-0.02 to 0.02	614.5	90	85.5	170	74	Ball	Aluminum	5	24	Fed. Std. Class 10, ISO Class 4	6833N42	00000000	6449N17	000000


		300 mm Stroke Length



				110	44	250	0.08	8	-0.02 to 0.02	641	70	84	122	60	Ball	Aluminum	5	24	Fed. Std. Class 10, ISO Class 4	6833N33	00000000	6449N17	000000


				400 mm Stroke Length



						110	44	250	0.08	8	-0.02 to 0.02	741	70	84	122	60	Ball	Aluminum	5	24	Fed. Std. Class 10, ISO Class 4	6833N34	00000000	6449N17	000000


						143	50	250	0.1	10	-0.02 to 0.02	814.5	90	85.5	170	74	Ball	Aluminum	5	24	Fed. Std. Class 10, ISO Class 4	6833N24	00000000	———	0


						600 mm Stroke Length



								143	50	250	0.1	10	-0.02 to 0.02	1,014.5	90	85.5	170	74	Ball	Aluminum	5	24	Fed. Std. Class 10, ISO Class 4	6833N46	00000000	6449N17	000000


								800 mm Stroke Length



										143	50	250	0.1	10	-0.02 to 0.02	1,214.5	90	85.5	170	74	Ball	Aluminum	5	24	Fed. Std. Class 10, ISO Class 4	6833N48	00000000	6449N17	000000